IBM System Storage DS8000 — Function Authorization for Machine type 2244 IBM FlashCopy SE features
IBM United States Hardware Announcement 107-670October 23, 2007
 ENUS107670.PDF (37KB)
|
| Table of contents | Document options | ||||||||||||||
|
|
At a glance
 |
| At a glance |
 |
The DS8000 Series Function Authorizations establish the extent of IBM authorization for use of the licensed functions on the IBM System Storage DS8000 series.
This announcement introduces the Function Authorization for IBM FlashCopy SE feature numbers 73xx (2244-PTC).
For ordering, contact:
Your IBM representative or IBM Americas Call Centers at
800-IBM-CALL
(Reference: YE001).
Back to top
|
|
| Overview |
|
The DS8000™ series Function Authorizations are for billing purposes only and establish the extent of IBM authorization for use of the licensed functions on an IBM System Storage™ DS8000 series (IBM 2107). This announcement introduces the Function Authorization for:
2244 Model PTC
- IBM System Storage FlashCopy® Add on (PTC Add feature numbers 72xx)
- IBM System Storage FlashCopy SE (SE feature numbers 73xx)
- IBM System Storage FlashCopy SE Add on (SE Add feature numbers 73xx)
- Hardware Announcement 107-610 , dated October 23, 2007 (IBM System Storage DS8000 series (M/T 2107) delivers new functional capabilities)
- Hardware Announcement 104-383 , dated October 12, 2004 (IBM TotalStorage® DS8000 Series — Function Authorizations)
Back to top
|
|
| Key prerequisites |
|
IBM System Storage DS8000 series
Back to top
|
|
| Planned availability date |
|
December 7, 2007
Back to top
|
|
| Description |
|
The following licensed functions are available on the IBM System Storage DS8000 Series (IBM 2107):
Licensed Function Description
2107 Models 92X and 9AX
Operating environment IBM System Storage DS Operating Environment
Database Protection IBM Database Protection Feature
Point in time copy IBM System Storage FlashCopy
Point in time copy add on IBM System Storage FlashCopy
FlashCopy SE IBM System Storage FlashCopy SE
FlashCopy SE add on IBM System Storage FlashCopy SE
Remote mirror and copy IBM System Storage Metro Mirror
IBM System Storage Global Mirror
IBM System Storage Global Copy
Metro/Global Mirror IBM System Storage 3-site Metro/Global
Mirror
Remote mirror for IBM System Storage z/OS Global Mirror
z/OS(R)
Parallel access volumes Parallel access volumes
HyperPAV IBM HyperPAV
2107 Models 93X and 9BX
Operating environment IBM System Storage DS OperatingEnvironment
FICON(TM)/ESCON(R) IBM FICON and ESCON Attachment
Attachment
Database Protection IBM Database Protection Feature
Point in time copy IBM System Storage FlashCopy
Point in time copy add on IBM System Storage FlashCopy
FlashCopy SE IBM System Storage FlashCopy SE
FlashCopy SE add on IBM System Storage FlashCopy SE
Metro Mirror IBM System Storage Metro Mirror and
Global Copy
Global Mirror IBM System Storage Global Mirror and
Global Copy
Metro mirror add on IBM System Storage Metro Mirror
Global mirror add on IBM System Storage Global Mirror
IBM System Storage Global Copy
Metro/Global Mirror IBM System Storage 3-site Metro/Global
Mirror
Remote mirror for z/OS IBM System Storage z/OS Global Mirror
Parallel access volumes Parallel access volumes
HyperPAV IBM HyperPAV
All DS8000 series licensed functions are enabled, authorized, managed, activated, and enforced based upon the physical capacity contained in a 2107 system. In the context of licensed functions, these terms are defined as follows:
-
The phrase "2107 system" refers to the 2107 base unit and all physically attached 2107 expansion
units:
- A 2107 base unit refers to the Model 921, 922, 931, 932, 9A2, or 9B2.
- A 2107 expansion unit refers to the Model 92E or 9AE.
The term "enablement" refers to the selection of a 2107 licensed function indicator feature number to technically activate the associated licensed function.
The term "authorization" refers to the acquisition of a DS8000 Series Function Authorization (IBM 2244) feature number to establish the extent of IBM authorization (license size in terms of physical capacity) for use of an associated licensed function. This is also referred to as the "authorization level."
The term "management" refers to client use of the DSFA application to select the license scope, assign the license value, and deactivate a licensed function.
The term "activation" refers to the client retrieval and installation of the feature activation code into the 2107 system. The feature activation code is made available by IBM and obtained using the DSFA application.
The term "enforcement" refers to logic and other technology within the 2107's licensed machine code to maintain compliance with established IBM authorization levels.
Enablement
Each licensed function is enabled for a 2107 system through the selection of the appropriate licensed function indicator feature number on the 2107 base unit.
Licensed function Licensed function indicator 2107 Models 92X and 9AX Operating environment 2107 feature number 0700 Database protection 2107 feature number 0708 Point in time copy 2107 feature number 0720 Point in time copy add 2107 feature number 0723 FlashCopy SE 2107 feature number 0730 FlashCopy SE add 2107 feature number 0733 Metro/Global Mirror 2107 feature number 0742 Remote mirror and copy 2107 feature number 0740 Remote mirror for z/OS 2107 feature number 0760 Parallel access volumes 2107 feature number 0780 HyperPAV 2107 feature number 0782 2107 Models 93X and 9BX Operating environment 2107 feature number 0700 FICON/ESCON Attachment 2107 feature number 0702 Database protection 2107 feature number 0708 Point in time copy 2107 feature number 0720 Point in time copy add 2107 feature number 0723 FlashCopy SE 2107 feature number 0730 FlashCopy SE add 2107 feature number 0733 3-Site Metro/Global Mirror 2107 feature number 0742 Metro Mirror 2107 feature number 0744 Global Mirror 2107 feature number 0746 Metro Mirror Add 2107 feature number 0754 Global Mirror Add 2107 feature number 0756 Remote mirror for z/OS 2107 feature number 0760 Parallel access volumes 2107 feature number 0780 HyperPAV 2107 feature number 0782
Each licensed function indicator feature selected on a 2107 base unit enables that function at the system level. These features are not selected on any attached 2107 expansion units.
Authorization
The extent of IBM authorization for the use of a licensed function on a 2107 system is established by acquiring 2244 Function Authorization models and feature numbers for the 2107 base unit:
Licensed function Function authorization 2107 Models 92X and 9AX Operating environment 2244 Model OEL feature numbers 70xx Database protection 2244 Model OEL feature number 7080 Point in time copy 2244 Model PTC feature numbers 72xx Point in time copy add 2244 Model PTC feature numbers 72xx FlashCopy SE 2244 Model PTC feature numbers 73xx FlashCopy SE add 2224 Model PTC feature numbers 73xx Metro/Global Mirror 2244 Model RMC feature numbers 74xx Remote mirror and copy 2244 Model RMC feature numbers 74xx Remote mirror for z/OS 2244 Model RMZ feature numbers 76xx Parallel access volumes 2244 Model PAV feature numbers 78xx HyperPAV 2244 Model PAV feature number 7899 2107 Models 93X and 9BX Licensed Function Function Authorization Operating environment 2244 Model OEL feature numbers 70xx FICON/ESCON Attachment 2244 Model OEL feature number 7090 Database protection 2244 Model OEL feature number 7080 Point in time copy 2244 Model PTC feature numbers 72xx Point in time copy add 2244 Model PTC feature numbers 72xx FlashCopy SE 2244 Model PTC feature numbers 73xx FlashCopy SE add 2244 Model PTC feature numbers 73xx Metro/Global Mirror 2244 Model RMC feature numbers 74xx Metro Mirror 2244 Model RMC feature numbers 74xx Global Mirror 2244 Model RMC feature numbers 74xx Metro Mirror Add 2244 Model RMC feature numbers 75xx Global Mirror Add 2244 Model RMC feature numbers 75xx Remote mirror for z/OS 2244 Model RMZ feature numbers 76xx Parallel access volumes 2244 Model PAV feature numbers 78xx HyperPAV 2244 Model PAV feature number 7899
Each Function Authorization acquired for a 2107 base unit establishes the authorization level for the 2107 system. For example, a system with a Model 922 or 932 and two Model 92E expansion units requires only one operating environment (2244 Model OEL) Function Authorization. Therefore, the authorization level(s) established by acquiring one or more Function Authorizations for the Model 922 or 932 must also cover the physical capacity of the attached Model 92E expansion units.
Each Function Authorization acquired for the Models 9A2 and 9B2 establishes the authorization level for all System Storage LPARs within the machine. For example, a Model 9A2 or 9B2 with two System Storage LPARs requires only one operating environment (2244 Model OEL) Function Authorization. However, licensed functions are managed and activated at the System Storage LPAR level; therefore, the total authorization level established by acquiring Function Authorizations for the Model 9A2 or 9B2 may not need to cover the physical capacity of the entire 2107 system.
The authorization level provided by each feature number is stated within the feature number description. The unit represents physical capacity, where a TB (terabyte) equals one trillion bytes. A 2107 system's total authorization level for a given licensed function is the sum of the units (terabytes) associated with all the acquired feature numbers.
Management
Licensed functions are managed using the DSFA application at:
To access DSFA, you will be required to enter information about your 2107 machine. You can find this information on the Storage Unit General Properties page in the IBM System Storage DS8000 Storage Manager application.
Management activities include:
- Selection of a license scope
- Assignment of a license value
- Deactivation of a licensed function
- Fixed Block (FB) — The function can be used only with data from Fibre Channel-attached servers.
- Count Key Data (CKD) — The function can be used only with data from FICON-attached servers.
- Both FB and CKD (ALL) — The function can be used with data from all attached servers.
Licensed function License scope options 2107 Models 92X and 9AX Operating environment ALL Database protection FB, CKD, or ALL Point in time copy FB, CKD, or ALL Point in time copy add FB, CKD, or ALL FlashCopy SE FB, CKD, or ALL FlashCopy SE add FB, CKD, or ALL Remote mirror and copy FB, CKD, or ALL Remote mirror for z/OS CKD Parallel access volumes CKD HyperPAV CKD 2107 Models 93X and 9BX Operating environment ALL FICON/ESCON Attachment CKD Database protection FB, CKD, or ALL Point in time copy FB, CKD, or ALL Point in time copy add FB, CKD, or ALL FlashCopy SE FB, CKD, or ALL FlashCopy SE add FB, CKD, or ALL Metro mirror FB, CKD, or ALL Global mirror FB, CKD, or ALL Metro mirror add FB, CKD, or ALL Global mirror add FB, CKD, or ALL Remote mirror for z/OS CKD Parallel access volumes CKD HyperPAV CKD
If a licensed function has multiple license scope options, you will be required to select a license scope during the initial retrieval of the feature activation code. This activity is performed using the DSFA application.
The license scope is not selected while ordering Function Authorization feature numbers; the feature numbers only establish the extent of IBM authorization (in terms of physical capacity) regardless of the storage type.
You can also change the license scope using the DSFA application after a licensed function has been activated. A new feature activation code will be generated and when you install it into the machine, the function will be activated and enforced using the newly selected license scope. Only an increase in the license scope (changing FB or CKD to ALL) is a nondisruptive activity. A lateral change (changing FB to CKD or changing CKD to FB) or a reduction of the license scope (changing ALL to FB or CKD) is a disruptive activity and requires a machine IML.
On the Model 9A2 and 9B2, the license scope does not need to be the same for each System Storage LPAR. For example, for the point in time copy licensed function, you can select a license scope of FB for System Storage LPAR 1 and a license scope of ALL for System Storage LPAR 2. You can also change the license scope on a System Storage LPAR basis and if the change is disruptive, you will only need to reboot the affected System Storage LPAR.
License Value: Licensed functions are activated and enforced based upon an assigned license value.
License value refers to extent of IBM authorization and is referenced as terabytes (TB) of physical capacity.
On the Models 921, 922, 931, and 932 license value assignment is an optional activity you can perform using the DSFA application.
On these models, the feature activation codes will always be generated using the total license value for each licensed function, unless you assign a license value of zero (0.0 TB).
On the Models 9A2 and 9B2, license value assignment is a required activity that you perform using the DSFA application.
On these models, the license value does not need to be the same for each System Storage LPAR. For example, if you have a 15 TB total authorization level for the point in time copy licensed function, you can assign a license value of 9.1 TB to System Storage LPAR 1 and a license value of 5.9 TB to System Storage LPAR 2.
You can also change the license value on a System Storage LPAR basis. If the change is a reduction in the license value, you may need to reboot the affected System Storage LPAR.
Deactivation: Assigning a license value of zero (0.0 TB) provides the ability to deactivate (disable) a licensed function. A new feature activation code will be generated and when you install it into the machine, the function will be deactivated during the next IML of the machine.
You can also reactivate a deactivated licensed function by changing the license value to a non-zero value. A new feature activation code will be generated and when you install it into the machine, the function will be activated. Reactivation is a nondisruptive activity.
When you deactivate a licensed function using the DSFA application, the installed function authorization feature numbers remain on the machine record. This means that you do not need to reacquire your Function Authorization feature numbers if you want to reactivate the licensed function at a future date.
Activation
Licensed functions are activated by the installation of feature activation codes into the 2107 system. The feature activation codes are made available by IBM and are obtained using the DSFA application.
Enforcement
The 2107 Licensed Machine Code contains logic and other technology to maintain compliance with established authorization levels. For each storage type, you will be allowed to logically configure physical capacity (that is, disk drives) only up to the extent of your authorization level for that storage type. If you have multiple licensed functions with the same license scope, the extent of IBM authorization is defined by the licensed function with the lowest license value.
On the Model 9A2 or 9B2, this enforcement is done on a System Storage LPAR level.
For a 2107 machine with Standby CoD disk drives (#2xx7 features),
activation (logical configuration) of CoD disk drives may exceed the
extent of IBM authorization for a licensed function, in which case an
increased authorization level must be acquired.
Back to top
|
|
| Reference information |
|
For more information, refer to the following announcements for additional information on the DS8000 series and licensed functions:
- 107-610 , dated October 23, 2007 (IBM System Storage DS8000 series (M/T 2107) delivers new functional capabilities)
- 104-383 , dated October 12, 2004 (IBM TotalStorage DS8000 Series — Function Authorizations)
Business Partner information
If you are a Direct Reseller - System Reseller acquiring products from IBM, you may link directly to Business Partner information for this announcement. A PartnerWorld ID and password are required (use IBM ID).
BP Attachment for Announcement Letter 107-670
Trademarks
Back to top
|
|
| Publications |
|
No publications are shipped with the DS8000™ Series Function Authorizations.
Back to top
|
|
| Services |
|
Global Technology Services
IBM services include business consulting, outsourcing, hosting services, applications, and other technology management.
These services help you learn about, plan, install, manage, or optimize your IT infrastructure to be an On Demand Business. They can help you integrate your high-speed networks, storage systems, application servers, wireless protocols, and an array of platforms, middleware, and communications software for IBM and many non-IBM offerings. IBM is your one-stop shop for IT support needs.
For details on available services, contact your IBM representative or visit
For details on available IBM Business Continuity and Recovery Services, contact your IBM representative or visit
For details on education offerings related to specific products, visit
Select your country, and then select the product as the category.
Back to top
|
|
| Technical information |
|
Specified operating environment
Hardware requirements
Each DS8000 series Function Authorization (IBM 2244) establishes the extent of IBM authorization for one or more licensed functions acquired for a IBM System Storage™ DS8000 series (IBM 2107). Each 2244 Function Authorization is applicable only for the specific 2107 (by serial number) for which it was acquired and is not transferable to another serial numbered 2107.
Each 2244 Function Authorization requires a corequisite licensed function indicator feature number on the 2107 for which is was acquired:
IBM 2107 IBM 2244
indicator function authorization
Licensed function feature number models and feature numbers
2107 Models 92X and 9AX
Operating environment 0700 Model OEL 70xx
Database protection 0708 Model LFA 7080
Point in time copy 0720 Model PTC 72xx
Point in time copy add 0723 Model PTC 72xx
FlashCopy(R) SE 0730 Model PTC 73xx
FlashCopy SE add 0733 Model PTC 73xx
Metro/Global Mirror 0742 Model RMC 74xx
Remote mirror and copy 0740 Model RMC 74xx
Remote mirror for z/OS(R) 0760 Model RMZ 76xx
Parallel access volumes 0780 Model PAV 78xx
HyperPAV 0782 Model PAV 7899
2107 Models 93X and 9BX
Operating environment 0700 Model OEL 70xx
FICON(TM)/ESCON(R) Attachment 0702 Model OEL 7090
Database protection 0708 Model LFA 7080
Point in time copy 0720 Model PTC 72xx
Point in time copy add 0723 Model PTC 72xx
FlashCopy SE 0730 Model PTC 73xx
FlashCopy SE add 0733 Model PTC 73xx
Metro/Global Mirror 0742 Model RMC 74xx
Metro Mirror 0744 Model RMC 74xx
Global Mirror 0746 Model RMC 74xx
Metro Mirror Add 0754 Model RMC 75xx
Global Mirror Add 0756 Model RMC 75xx
Remote Mirror for z/OS 0760 Model RMZ 76xx
Parallel access volumes 0780 Model PAV 78xx
HyperPAV 0782 Model PAV 7899
Operating environment: An operating environment license is required on every 2107 base unit (Models 921, 922, 931, 932, 9A2, and 9B2). The extent of IBM authorization acquired through the 2244 Model OEL feature numbers must cover the physical capacity of the 2107 system, where system is defined as the base unit and all physically attached expansion units (excluding Standby CoD capacity).
If the operating environment license has not been acquired and activated on the machine, disk drives installed within the 2107 system cannot be logically configured for use. Upon activation of the operating environment, disk drives can be logically configured up to the extent of IBM authorization.
As additional disk drives are installed, the extent of IBM authorization must be increased by acquiring additional 2244 Model OEL feature numbers. Otherwise, the additional disk drives cannot be logically configured for use.
For a 2107 system with Standby CoD disk drives (#2xx7 features), activation (logical configuration) of CoD disk drives may exceed the extent of IBM authorization for the operating environment, in which case an increased authorization level must be acquired.
Planning information
Customer responsibilities
Determining the required Extent of IBM Authorization: You are responsible for determining the extent of IBM authorization required for each licensed function. Your disk marketing specialist can help you with this activity.
Below are some general guidelines:
-
The required authorization level depends upon the license scope:
- If the license scope is FB, the authorization level must be equal to or greater than the total amount of physical capacity within the system that will be logically configured as FB.
- If the license scope is CKD, the authorization level must be equal to or greater than the total amount of physical capacity within the system that will be logically configured as CKD.
- If the license scope is ALL, the authorization level must be equal to or greater than the total system physical capacity.
-
For Models 9A2 and 9B2, the required authorization level depends not only upon the license scope,
but also the physical capacity of the System Storage LPARs that you want to activate the function
on. For example, if you want to:
-
Activate a licensed function on only System Storage LPAR 1 with a license scope of FB:
- The authorization level must be equal to or greater than the total amount of physical capacity within System Storage LPAR 1 that will be logically configured as FB.
-
Activate a licensed function on System Storage LPAR 1 and LPAR 2, both with a license scope of CKD:
- The authorization level must be equal to or greater than the total amount of physical capacity within both System Storage LPAR 1 and LPAR 2 that will be logically configured as CKD.
-
Activate a licensed function on System Storage LPAR 1 with a license scope of FB and on LPAR 2 with
a license scope of ALL:
- The authorization level must be equal to or greater than the total amount of physical capacity within System Storage LPAR 1 that will be logically configured as FB and the total physical capacity within LPAR 2.
-
Activate a licensed function on only System Storage LPAR 1 with a license scope of FB:
- You can exclude Standby CoD disk drives (#2xx7 features) from your authorization level calculation. However, you must increase your authorization levels as Standby CoD disk drives are activated (logically configured for use).
- Refer to the IBM System Storage DS8000 Introduction and Planning Guide (GC35-0515) for physical capacity calculation guidelines.
Licensed Function Management and activation
You are responsible for licensed function management and activation activities:
- Management refers to use of the DSFA application to select the license scope and assign the license value.
- Activation refers to the retrieval and installation of the feature activation code into the 2107 system. The feature activation code is made available by IBM and obtained using the DSFA application.
DSFA application: To access DSFA, you will be required to enter information about your 2107 machine. You can find this information on the Storage Unit General Properties page in the IBM System Storage DS8000 Storage Manager application.
The DSFA application is available at
You are responsible for downloading or obtaining from IBM, and installing designated machine code (microcode, basic input/output system code (called BIOS), utility programs, device drivers, and diagnostics delivered with an IBM machine) and other software updates in a timely manner from an IBM Internet Web site or from other electronic media, and following the instructions that IBM provides. You may request IBM to install machine code changes; however, you may be charged for that service.
Cable orders: No cables required.
Security, auditability, and control
The customer is responsible for evaluation, selection, and implementation of security features,
administrative procedures, and appropriate controls in application systems and communications
facilities.
Back to top
|
|
| Terms and conditions |
|
MES discount applicable: Equal to the volume commitment discount
Field-installable feature: Yes
Warranty period: Warranty for a DS8000 series licensed function is entitled as a feature of the 2107 machine for which the licensed function is authorized, under the terms and conditions associated with that machine.
Customer setup: Customer setup, customers are responsible for installation according to the instructions IBM provides with the Machine.
Licensed machine code: IBM Machine Code is licensed for use by a customer on the IBM Machine for which it was provided by IBM under the terms and conditions of the IBM License Agreement for Machine Code, to enable the machine to function in accordance with its specifications, and only for the capacity authorized by IBM and for which the customer has acquired.
You can obtain the agreement at
-
http://www-1.ibm.com/servers/support/machine_warranties/machine_code.html
Or by contacting your IBM representative.
DS8000 Series Function Authorizations (IBM 2244) are acquired for 2107 base unit models and establish the extent of IBM authorization for the licensed function at the 2107 system level. A 2107 system is defined as the 2107 base unit model (Models 921, 922, 931, 932, 9A2, and 9B2) and any physically attached 2107 expansion unit models (Models 92E, and 9AE).
Each DS8000 Function Authorization acquired for the 2107 Models 9A2, and
9B2 establishes the extent of IBM authorization for one or more licensed
functions on all System Storage LPARs within that system.
Back to top
|
|
| Prices |
|
The prices provided in this announcement are suggested retail prices for the U.S. only and are provided for your information only. Dealer prices may vary, and prices may also vary by country. Prices are subject to change without notice. For additional information and current prices, contact your local IBM representative.
IBM
Machine Feature list
Description type Model number price(1) MMMC(2)
DS8000 Series Function 2244 PTC
Authorization
Point in Time Copy (PTC) Add:
- PTC Add -- inactive 7230 $ 0 NC
- PTC Add -- 1 TB unit 7231 6,500 NC
- PTC Add -- 5 TB unit 7232 27,625 NC
- PTC Add -- 10 TB unit 7233 54,875 NC
- PTC Add -- 25 TB unit 7234 85,000 NC
- PTC Add -- 50 TB unit 7235 142,500 NC
- PTC Add -- 100 TB unit 7240 232,500 NC
- PTC Add -- 200 TB unit 7245 441,750 NC
IBM FlashCopy SE:
- SE -- inactive 7300 $ 0 NC
- SE -- 1 TB unit 7301 13,000 NC
- SE -- 5 TB unit 7302 55,250 NC
- SE -- 10 TB unit 7303 109,750 NC
- SE -- 25 TB unit 7304 170,000 NC
- SE -- 50 TB unit 7305 285,000 NC
- SE -- 100 TB unit 7310 465,000 NC
- SE -- 200 TB unit 7315 883,500 NC
IBM FlashCopy SE Add:
- SE Add -- inactive 7330 $ 0 NC
- SE Add -- 1 TB unit 7331 6,500 NC
- SE Add -- 5 TB unit 7332 27,625 NC
- SE Add -- 10 TB unit 7333 54,875 NC
- SE Add -- 25 TB unit 7334 85,000 NC
- SE Add -- 50 TB unit 7335 142,500 NC
- SE Add -- 100 TB unit 7340 232,500 NC
- SE Add -- 200 TB unit 7345 441,750 NC
(1) List price does not include tax or shipping and is
subject to change without notice. Reseller prices
may vary.
(2) Minimum monthly maintenance charge
Feature change options
Feature Install feature feature feature
Description number type conversion exchange remove
Point in Time Copy (PTC) Add:
- PTC Add -- inactive 7230 Field only No No Yes
- PTC Add -- 1 TB unit 7231 Field only No No Yes
- PTC Add -- 5 TB unit 7232 Field only No No Yes
- PTC Add -- 10 TB unit 7233 Field only No No Yes
- PTC Add -- 25 TB unit 7234 Field only No No Yes
- PTC Add -- 50 TB unit 7235 Field only No No Yes
- PTC Add -- 100 TB unit 7240 Field only No No Yes
- PTC Add -- 200 TB unit 7245 Field only No No Yes
IBM FlashCopy SE:
- SE -- inactive 7300 Field only No No Yes
- SE -- 1 TB unit 7301 Field only No No Yes
- SE -- 5 TB unit 7302 Field only No No Yes
- SE -- 10 TB unit 7303 Field only No No Yes
- SE -- 25 TB unit 7304 Field only No No Yes
- SE -- 50 TB unit 7305 Field only No No Yes
- SE -- 100 TB unit 7310 Field only No No Yes
- SE -- 200 TB unit 7315 Field only No No Yes
IBM FlashCopy SE Add:
- SE Add -- inactive 7330 Field only No No Yes
- SE Add -- 1 TB unit 7331 Field only No No Yes
- SE Add -- 5 TB unit 7332 Field only No No Yes
- SE Add -- 10 TB unit 7333 Field only No No Yes
- SE Add -- 25 TB unit 7334 Field only No No Yes
- SE Add -- 50 TB unit 7335 Field only No No Yes
- SE Add -- 100 TB unit 7340 Field only No No Yes
- SE Add -- 200 TB unit 7345 Field only No No Yes
The feature change options define the approach by which the feature number is removed from the machine and/or IBM machine-level inventory records.
- Feature Conversion: As necessary, IBM service personnel will remove components from the machine and/or install additional components required to complete the conversion.
- Feature Exchange: As necessary, IBM service personnel will remove components from the machine and/or install additional components required to complete the conversion.
-
Feature Remove: This is an administrative transaction and only updates
IBM machine and inventory records, except under the following condition:
- IBM will remove components from the machine if the Feature Remove is ordered in conjunction with a Feature Add transaction.
Back to top
|
|
| Order now |
|
To order, contact the Americas Call Centers or your local IBM representative.
To identify your local IBM representative, call 800-IBM-4YOU (426-4968).
Phone: 800-IBM-CALL (426-2255)
Fax: 800-2IBM-FAX (242-6329)
Internet: callserv@ca.ibm.com
Mail: IBM Teleweb Customer Support
ibm.com Sales Execution Center, Americas North
3500 Steeles Ave. East, Tower 3/4
Markham, Ontario
Canada
L3R 2Z1
Reference: YE001
The Americas Call Centers, our national direct marketing organization, can add your name to the mailing list for catalogs of IBM products.
Note: Shipments will begin after the planned availability date.
Trademarks
Back to top
Printable version