IBM System Storage N7800 Model A10 and Model A20 offer enterprise-class NAS, Fibre Channel, and iSCSI storage

IBM United States Hardware Announcement 106-644
August 22, 2006

 

 ENUS106-644.PDF (143KB)

Table of contents   Document options  
TOC link At a glance TOC link Publications
TOC link Overview TOC link Services
TOC link Key prerequisites TOC link Technical information
TOC link Planned availability dates TOC link Terms and conditions
TOC link Description TOC link Prices
TOC link Reference information TOC link Order now
TOC link Feature descriptions  
 
Printable version Printable version

 
At a glance

Image

The IBM System Storage N7800 Model A10 can be configured with a maximum of 48 EXN storage expansion units; Model A20 with a maximum of 72. These models are designed to provide:

  • Enterprise-class performance
  • Up to 672 (Model A10) and 1008 (Model A20) disk drive support (regardless of capacity)
  • Both FC and SATA disk expansion unit attachment
  • Four AMD 2.6 GHz 64-bit Opteron processors (per node), each with 1 MB of level 2 cache
  • 32 GB (per node) of DDR-333 memory
  • Upgrade a Model A10 to Model A20

The IBM System Storage N7800 Model A20 is also designed to provide enhanced reliability with active/active failover support.

For ordering, contact:

Your IBM representative, an IBM Business Partner, or IBM Americas Call Centers at 800-IBM-CALL (Reference: YE001).
 
Back topBack to top
 

Overview

The IBM System Storage™ N7800 storage controller includes the Model A10, a single-node base unit, and the Model A20, an active/active dual-node base unit. Both models are designed to provide fast data access, simultaneous multiprotocol support, expandability, upgradability, and low maintenance requirements.

The two models of the N7800 feature:

  • Support of enterprise customers requiring Network Attached Storage (NAS), Fibre Channel (FC), or Internet Small Computer System Interface (iSCSI) connectivity
  • 672 (Model A10) and 1008 (Model A20) disk drive support — regardless of physical capacity
  • Attachment of both FC and Serial Advanced Technology Attachment (SATA) disk expansion units
  • 32 GB (per node) of DDR-333 memory
  • 2 GB (per node) of non-volatile random access memory
  • Eight backend FC loops, per node, (four per node, native, plus four optional using FC HBA features)
  • Upgrade capability from Model A10 to Model A20

These N series models are designed to provide fast data access, simultaneous multiprotocol support, expandability, upgradability, and low maintenance requirements. Additional functions, such as snapshot, compliance, mirroring, and business continuance capability, are available through optional licensed functions.

The N7800 storage controller supports both the EXN1000 SATA storage expansion unit and the EXN2000 Fibre Channel storage expansion unit. At least one storage expansion unit must be attached to the N7800. A maximum of 48 storage expansion units may be attached to the Model A10; 72 for the Model A20. The EXN1000 storage expansion unit can be configured with 4 to 14 disk drives of 250 GB, 320 GB, or 500 GB physical capacity. The EXN2000 storage expansion unit can be configured with 5 to 14 disk drives of 72 GB, 144 GB, or 300 GB physical storage capacity. EXN1000 SATA storage expansion units and EXN2000 FC storage expansion units may not share the same FC loop.
 
Back topBack to top
 

Key prerequisites

The IBM System Storage N7800 requires FC, NFS, CIFS, or iSCSI protocol function.
 
Back topBack to top
 

Planned availability dates
  • September 1, 2006: Except for model conversion (A10 to A20)
  • December 15, 2006: Model conversion (A10 to A20)

 
Back topBack to top
 
Description

The IBM System Storage N7800 storage controllers are designed to interoperate with products capable of data transmission in the industry-standard iSCSI, CIFS, FCP, and NFS protocols. These include the IBM System p™, IBM System i™ (NFS only), IBM System x™, and IBM System z™ (NFS only) servers. The N7800 storage controllers consist of the Model A10 and Model A20 and associated software.

The IBM System Storage N7800 Model A10 is designed to provide a single-node storage controller with iSCSI support, and NFS, CIFS, and FCP support via optional features. The N7800 is a 6U storage controller that must be mounted in a standard 19-inch rack. The N7800 storage controller does not include storage in the base chassis. The base chassis includes:

  • Four AMD 2.6 GHz Opteron processors, each with 1 MB of level 2 cache
  • 32 GB of DDR-333 memory
  • 2 GB of non-volatile random access memory (NVRAM)
  • Six integrated Gigabit Ethernet RJ45 ports
  • Eight integrated 2 Gbps FC ports
  • Dual redundant hot-plug integrated power supplies and cooling fans
  • Three PCI-X expansion slots for additional FC HBAs or Gigabit Ethernet NICs
  • Five PCIe expansion slots
  • One serial console port

The maximum number of additional expansion adapters is eight. One expansion slot is used for the standard (included with the N7800) 512 MB NVRAM adapter card. The Model A10 can be upgraded to a maximum of eight multipath (loop A and loop B) FC loops (16 2-Gbps FC ports) via the addition of four optional FC HBAs for Disk Attachment (feature number 1014). The eight loops will support a maximum of 672 total disk drives. The Model A10 can be upgraded to a maximum of 14 Gigabit Ethernet ports via the addition of two optional quad-port copper Gigabit Ethernet NICs (feature number 1009). The Model A10 may be upgraded to a Model A20. The upgrade from a Model A10 to a Model A20 is a disruptive upgrade.

The Model A20 is designed to provide identical function as the N7800 Model A10, but with the addition of a second processing node and the Clustered Failover (CFO) licensed function. The Model A20 supports a maximum of 1008 drives, 64 GB of DDR-333 memory, and 16 backend FC loops. The Model A20 consists of eight processors that are designed to provide failover and failback function, helping improve overall availability. For the Model A20, each node is a 6U rack-mountable storage controller. Therefore, the Model  A20 occupies a total of 12U of rack space.

The Model A20 includes:

  • Eight AMD 2.6 GHz Opteron processors, each with 1 MB of level 2 cache
  • 64 GB of DDR-333 memory
  • 4 GB of NVRAM
  • 12 integrated Gigabit Ethernet RJ45 ports
  • 16 integrated 2 Gbps FC ports
  • Dual redundant hot-plug integrated power supplies and cooling fans
  • Ten PCIe expansion slots
  • 12 PCIe expansion slots
  • Two serial console ports

For the Model A20, the maximum number of additional expansion adapters is 16 (8 per node). The Model A20 can be upgraded to a maximum of 12 multipath (loop A and loop B) FC loops (24 2-Gbps FC ports) via the addition of four optional FC HBAs for Disk Attachment (feature number 1014). The Model A20 can up upgraded to a maximum of 20 Gigabit Ethernet ports via the addition of four optional quad-port copper Gigabit Ethernet NICs (feature number 1009).

The physical proximity of the two processing nodes within a Model A20 (with respect to each other) is determined by which Infiniband cluster interconnect cables are ordered (feature numbers 1037, 1038, 1039, 1040, and 1041). Optical cables, #1040 and #1041, also require feature number 1042.

The N7800 Models A10 and A20 require at least one storage expansion unit, either an EXN1000 or an EXN2000. The EXN1000 storage expansion unit provides a 3U rack-mountable disk enclosure containing four and up to a maximum of 14 serial advanced technology attachment (SATA) disk drives, either in 250 GB or 500 GB physical capacities. The EXN2000 storage expansion unit provides a 3U rack-mountable disk enclosure containing 5 and up to a maximum of 14 FC disk drives. The EXN2000 supports the following FC disk drive speeds and capacities:

  • 15,000 revolutions per minute (15K RPM) in 72 GB and 144 GB capacities
  • 10,000 revolutions per minute (10K RPM) in 72 GB, 144 GB, and 300 GB capacities

Each EXNx000 storage expansion unit contains a maximum of 14 disk drives, all of a particular type (rotational speed and capacity). For the initial order of the IBM System Storage N7800, you may not include EXNx000 storage expansion units containing more than two types (rotational speed and capacity) of disk drives.

The maximum raw storage capacity of the N7800 system is determined only by the number of disk drives supported. The N7800 Model A10 supports a maximum of 672 drive spindles and the Model A20 supports 1008 (regardless of capacity).

The following table describes the maximum supported total physical storage capacity for the N7800 Model A10:

                         Maximum     Maximum  Maximum
Disk       Disk drive    storage     disk     physical
enclosure  capacity      enclosures  drives   capacity
 
EXN1000    250 GB SATA   48          672      168.00 TB
            disk drives
EXN1000    500 GB SATA   48          672      336.00 TB
            disk drives
EXN2000    72 GB FC      48          672       48.38 TB
            disk drives
EXN2000    144 GB FC     48          672       96.76 TB
            disk drives
EXN2000    300 GB FC     48          672      201.60 TB
            disk drives

The following table describes the maximum supported total physical storage capacity for both the N7800 Model A20:

                         Maximum     Maximum  Maximum
Disk       Disk drive    storage     disk     physical
enclosure  capacity      enclosures  drives   capacity
 
EXN1000    250 GB SATA   72          1008     252.00 TB
            disk drives
EXN1000    500 GB SATA   72          1008     504.00 TB
            disk drives
EXN2000    72 GB FC      72          1008      72.57 TB
            disk drives
EXN2000    144 GB FC     72          1008     145.15 TB
            disk drives
EXN2000    300 GB FC     72          1008     302.40 TB
            disk drives

EXN1000 SATA storage expansion units and EXN2000 FC storage expansion units must not share a FC loop. A maximum of six storage expansion units (EXN1000 or EXN2000) are supported on a single FC loop.

Section 508 of the U.S. Rehabilitation Act

The IBM System Storage N7800 is capable, as of September 1, 2006, when used in accordance with IBM's associated documentation, of satisfying the applicable requirements of Section 508 of the Rehabilitation Act, provided that any assistive technology used with the product properly interoperates with it. A U.S. Section 508 Voluntary Product Accessibility Template (VPAT) can be requested via IBM's Web site at


 
Back topBack to top
 
Reference information

Refer to:

  • Hardware Announcement 106-633 , dated August 22, 2006, IBM System Storage N7600 offers enterprise-class FC and iSCSI Network Attached Storage
  • Hardware Announcement 106-635 , dated August 22, 2006, IBM System Storage N series function authorization for IBM System Storage N7600 and N7800 Models A10, A20, G10, and G20

Business Partner information

If you are a Direct Reseller - System Reseller acquiring products from IBM, you may link directly to Business Partner information for this announcement. A PartnerWorld ID and password are required (use IBM ID).

BP Attachment for Announcement Letter 106-644

Trademarks

 
System Storage, System i, System p, System x, and System z are trademarks of International Business Machines Corporation in the United States or other countries or both.
 
AIX and Tivoli are registered trademarks of International Business Machines Corporation in the United States or other countries or both.
 
Windows is a trademark of Microsoft Corporation.
 
UNIX is a registered trademark of the Open Company in the United States and other countries.
 
Linux is a trademark of Linus Torvalds in the United States, other countries or both.
 
NetApp, MultiStore, SnapMirror, SnapMover, SnapRestore, SnapValidator, and SnapVault are registered trademarks and Data ONTAP, FlexClone, FlexVol, LockVault, SnapLock, FlexShare, and Snapshot are trademarks of Network Appliance, Inc. in the U.S. or other countries.
 
Other company, product, and service names may be trademarks or service marks of others.

 
Back topBack to top
 
Feature descriptions

Adapter cards

For PCI-Express (PCIe) adapter cards, a maximum of 5 adapter cards may be ordered for Model A10, 12 for Model A20. For PCI-X adapter cards, a maximum of three adapter cards may be ordered for Model A10, six for Model A20.

When adapter cards are ordered for Model A20 on the initial order, they must be ordered in pairs (an even number — an equal number for each node). For MES orders, this rule does not apply.

When upgrading from Model A10 to A20, the second node must have the same configuration as the first node. Adapter cards to match those in the first node must also be ordered.

1-Port 10GbE TOE NIC (#1008): This 10 Gb Ethernet PCI-X TCP/IP Offload Engine (TOE) adapter feature provides a single LC duplex connector. It supports a maximum distance of 300 meters using 850-nanometer (nm) multimode fiber (MMF) media. The Model A10 allows a maximum of two of this feature; Model A20 allows a maximum of four.

Cable features 5m 50-micron MMF Cable (#1045) or 30m 50-micron MMF Cable (#1046) may (optionally) be ordered with this feature.

4-Port Copper GbE NIC (#1009): This gigabit Ethernet (1000Base-T) PCI-X TOE feature provides four RJ45 connectors. The maximum supported distance is 100 meters using Cat. 5, or better, unshielded twisted pair (UTP) four-pair media. The Model A10 allows a maximum of two of this feature; Model A20 allows a maximum of four.

2-Port iSCSI Target CU NIC (#1010): This gigabit Ethernet iSCSI PCI-X TOE feature provides two RJ45 connectors. The Model A10 allows a maximum of three of this feature; Model A20 allows a maximum of six.

2-Port iSCSI Target Fi NIC (#1011): This Gigabit Ethernet iSCSI PCI-X TOE feature provides two optical LC duplex connectors. The Model A10 allows a maximum of three of this feature; Model A20 allows a maximum of six.

2-Port Fiber GbE NIC (#1012): This Gigabit Ethernet (1000Base-SX) PCIe feature provides two LC duplex connectors. The maximum supported distance is 275 meters using 62.5 micron MMF media and 550 meters using 50 micron MMF media. The Model A10 allows a maximum of five of this feature; Model A20 allows a maximum of ten.

2-Port Cu GbE NIC (#1013): This 10/100/1000 Ethernet PCIe feature provides two RJ45 connectors and supports 10Base-T, 100Base-TX, and 1000Base-T Ethernet standards. The maximum supported distance is 100 meters using Cat. 5 UTP four-pair media. The Model A10 allows a maximum of five of this feature; Model A20 allows a maximum of ten.

4-Gbps FC HBA — Disk, 2-port (#1014): This feature provides one PCIe dual-port 4-Gbps HBA for attaching disk expansion units (EXN1000 and EXN2000) to the N7800. This adapter auto-negotiates connections of 1-Gbps, 2-Gbps, or 4-Gbps. Two small form factor (SFF) multimode optical ports with LC connectors support the following cable lengths:

Link        50 micron   62.5 micron
operating   multimode   multimode
speed       fiber       fiber
 
1 Gbps      500 m       300 m
2 Gbps      300 m       150 m
4 Gbps      150 m        70 m

The ports of this adapter may not be used as FCP target ports.

The Model A10 allows a maximum of four of this feature; Model A20 allows a maximum of eight.

4-Gbps FC HBA — Tape, 2-port (#1015): This feature provides one PCIe dual-port 4-Gbps HBA for attaching tape devices. This adapter auto-negotiates connections of 1-Gbps, 2-Gbps, or 4-Gbps. Two small form factor (SFF) multimode optical ports with LC connectors support the following cable lengths:

Link        50 micron   62.5 micron
 
operating   multimode   multimode
speed       fiber       fiber
 
1 Gbps      500 m       300 m
2 Gbps      300 m       150 m
4 Gbps      150 m        70 m
The ports of this adapter may not be used as FCP target ports.

A 50-micron optical loopback cable with LC connectors is included with this feature.

The Model A10 allows a maximum of three of this feature; Model A20 allows a maximum of six.

SCSI LVD Tape Adapter (#1016): This feature provides one SCSI Ultr320 dual-channel LVD PCI-X adapter designed to support connection to a tape device. The adapter includes two 68-pin VHDCI external connectors (Channel A and Channel B). Two SCSI LVD two-meter cables (for connecting to the tape device) are included. These cables have 68-pin VHDCI connectors on each end. The Model A10 allows a maximum of three of this feature; Model A20 allows a maximum of six.

2-Port 4-Gbps FC HBA-Target (#1017): This feature provides one PCIe dual-port 4-Gbps HBA for FCP target ports. This adapter may only be used to provide additional target ports; it may not be used to attach storage expansion units. It auto-negotiates connections of 1-Gbps, 2-Gbps, or 4-Gbps. Two SFF multimode optical ports with LC connectors support the following cable lengths:

Link        50 micron   62.5 micron
operating   multimode   multimode
speed       fiber       fiber
 
1 Gbps      500 m       300 m
2 Gbps      300 m       150 m
4 Gbps      150 m        70 m

The Model A10 allows a maximum of four of this feature; Model A20 allows a maximum of eight.

Cluster cables

Cluster cables are only required for 2867 Model A20. One of the cable features must be included in an order for the Model A20. These cables are used to connect the two nodes of the Model A20. If fiber cables are ordered, feature number 1042 must also be ordered.

Each cable feature provides the two cables required; a quantity of only one should be ordered. Feature #1042, if required, provides four converters; only one of this feature needs to be ordered.

The cabling features are:

  • 2m Copper Cluster 4X IB Cbl (#1037)
  • 5m Copper Cluster 4X IB Cbl (#1038)
  • 10m Copper Cluster 4X IB Cbl (#1039)
  • 5m Fiber Cluster 4X IB Cbl (#1040)
  • 30m Fiber Cluster 4X IB Cbl (#1041)
  • Copper-Fiber Converter (#1042)

Ethernet cables

5m 50-micron MMF Cable (#1045): This feature provides one 5-meter 50-micron multimode optical fiber cable for use with the 1-Port 10GbE NIC (feature #1008).

30m 50-micron MMF Cable (#1046): This feature provides one 30-meter 50-micron multimode optical fiber cable for use with the 1-Port 10GbE NIC (feature #1008).

Power supply

100-240 V ac Power Supply (#1100): This feature provides two power supplies requiring input of 100-240 V ac, 12-6A, 50/60 Hz, 1 phase power.

Licensed function features

Licensed functions are authorized at the 2867 system level. Only one feature is required per 2867 system, regardless of the physical capacity within the 2867 system or the number of attached expansion units.

The following additional licensed functions are available on the N7800 Models A10 and A20 as optional features:

Model A10  Model A20
feature    feature    Description
 
7801       7851       CIFS
7802       7852       HTTP
7803       7853       NFS
  NA       7854       CFO
7805       7855       IBM System Storage(TM) N7800 with
                       FlexClone
7806       7856       IBM System Storage N7800 with
                       MultiStore
7807       7857       IBM System Storage N7800 with
                       SnapMirror
7808       7858       IBM System Storage N7800 with
                       SnapLock Compliance
7809       7859       IBM System Storage N7800 with
                       SnapLock Enterprise
  NA       7860       IBM System Storage N7800 with
                       SnapMover
7811       7861       IBM System Storage N7800 with
                       SnapRestore
7812       7862       IBM System Storage N7800 with
                       SnapVault Primary
7813       7863       IBM System Storage N7800 with
                       SnapVault Secondary
7814       7864       IBM System Storage N7800 with
                       LockVault Compliance
7815       7865       IBM System Storage N7800 with
                       LockVault Enterprise
7816       7866       IBM System Storage N7800 with
                       SyncMirror
7817       7867       IBM System Storage N7800 with
                       SnapValidator
7818       7868       Fibre Channel Protocol
7819       7869       Disk Sanitization
7820       7870       SnapManager/Exchange -- Filer
7821       7871       SnapManager/SQL -- Filer
7822       7872       near-line Function
  NA       7873       MetroCluster
8000       8000       SnapDrive -- AIX(R) 1-2 Procs
8001       8001       SnapDrive -- AIX 3-4 Procs
8002       8002       SnapDrive -- AIX 5-8 Procs
8003       8003       SnapDrive -- AIX 9+ Procs
8004       8004       SnapDrive -- HPUX 1-2 Procs
8005       8005       SnapDrive -- HPUX 3-4 Procs
8006       8006       SnapDrive -- HPUX 5-8 Procs
8007       8007       SnapDrive -- HPUX 9+ Procs
8008       8008       SnapDrive -- Solaris 1-2 Proc
8009       8009       SnapDrive -- Solaris 3-4 Proc
8010       8010       SnapDrive -- Solaris 5-8 Proc
8011       8011       SnapDrive -- Solaris 9+ Procs
8020       8020       SnapDrive -- Linux(TM) 1-2 Procs
8021       8021       SnapDrive -- Linux 3-4 Procs
8022       8022       SnapDrive -- Linux 5-8 Procs
8023       8023       SnapDrive -- Linux 9+ Procs
8040       8040       SnapDrive for UNIX(R) Media Kit
8050       8050       SnapDrive for Windows(TM)
8051       8051       SnapDrive for Win Media Kit
8100       8100       FCP Host Attach Kit -- Win
8101       8101       FCP Multipathing Dvr -- Win
8110       8110       Base FCP Host Atch Kit -- AIX
8111       8111       AIX Multipathing -- 1-2 Procs
8112       8112       AIX Multipathing -- 3-4 Procs
8113       8113       AIX Multipathing -- 5-8 Procs
8114       8114       AIX Multipathing -- 9+ Procs
8119       8119       AIX Media Kit for Multipath
8120       8120       FCP Host Attach Kit -- Linux
8121       8121       FCP Host Attach Kit -- HPUX
8122       8122       FCP Host Atch Kit -- Solaris
8131       8131       SnapManager/Exchange -- Host
8132       8132       SnapManager/Exch -- Media Kit
8141       8141       SnapManager for SQL -- Host
8142       8142       SnapManager/SQL -- Media Kit
8150       8150       Single Mbox Recovery 100 pk
8151       8151       Single Mbox Recovery 500 pk
8152       8152       Single Mbox Recovery 1000 pk
8153       8153       Single Mbox Recovery 2500 pk
8154       8154       Single Mbox Recovery 5K pk
8155       8155       Single Mbox Recovery 10K pk
8156       8156       Single Mbox Recovery 50K pk
8157       8157       Single Mbox Recovery Med Kt
8158       8158       SMBR CA-ARCSERVE Extract Wiz
8159       8159       SMBR Tivoli(R) Tape Extract Wiz
8160       8160       SMBR Legato Tape Extract Wiz
8161       8161       SMBR NetBackup Extract Wiz
8162       8162       SMBR PST Tape Extract Wiz
8163       8163       SMBR HP Extract Wiz
8250       8250       Data Fabric Manager Core
8252       8252       DFM Bus. Continuance Option
8253       8253       DFM Store Resource Mgmt Opt
8254       8254       DFM Media Kit

Licensed function indicators

Data ONTAP (#7800 and #7850): This feature enables the Data ONTAP licensed function. Data ONTAP is an optimized, scalable, and flexible operating system for the IBM N series storage controllers that is designed for heterogeneous environments. Data ONTAP is designed to deliver flexible management and high availability, support business continuance, and support data retention, thereby helping reduce storage management complexity in your enterprise. Data ONTAP includes iSCSI, FlexShare, FlexCache, FlexVol, and Snapshot support.

The corequisite 2870 feature number must be specified to establish authorization for use of the Data ONTAP licensed function.

CIFS (#7801 and #7851): This feature enables the CIFS licensed function, which is designed to provide connectivity to client machines so that data can be transferred via the CIFS protocol. This feature is also used for maintenance billing purposes.

The corequisite 2870 feature number must be purchased to establish authorization for use of the CIFS licensed function before the feature activation code is provided by IBM.

HTTP (#7802 and #7852): This feature enables the HTTP licensed function, which is designed to provide data transfer to and from the N7800 storage controllers via the HTTP protocol. This feature is also used for maintenance billing purposes.

The corequisite 2870 feature number must be purchased to establish authorization for use of the HTTP licensed function before the feature activation code is provided by IBM.

NFS (#7803 and #7853): This feature enables the NFS licensed function provided the customer has applied a feature activation code that is made available by IBM. The NFS licensed function is designed to provide connectivity to clients that transfer data via the NFS protocol. This feature is also used for maintenance billing purposes.

The corequisite 2870 feature number must be purchased to establish authorization for use of the NFS licensed function before the feature activation code is provided by IBM.

CFO (#7854 — G20 only): Installed on a pair of N series storage controllers, this feature is designed to enable the transfer of data service from an unavailable controller to the other controller in the cluster. It is designed to deliver a robust and highly available data service for business-critical environments. This feature applies to the N7800 Model G20 only.

FlexClone (#7805 and #7855): This feature enables the FlexClone licensed function provided the customer has applied a feature activation code that is made available by IBM. FlexClone is designed to enable true cloning — near-instant replication of data volumes and data sets — without requiring additional storage space at the time of creation. This feature is also used for maintenance billing purposes.

The corequisite 2870 feature number must be purchased to establish authorization for use of the FlexClone licensed function before the feature activation code is provided by IBM.

MultiStore (#7806 and #7856): This feature enables the MultiStore licensed function provided the customer has applied a feature activation code that is made available by IBM. MultiStore is designed to provide partitioning of network and storage resources and enable multidomain and multiserver consolidation on a single storage appliance. In addition, it is designed to help reduce data management cost by introducing a tiered management model enabling cost-effective administration. This feature is also used for maintenance billing purposes.

The corequisite 2870 feature number must be purchased to establish authorization for use of the MultiStore licensed function before the feature activation code is provided by IBM.

Note: The combination of Fibre Channel Protocol (#7818) and MultiStore (#7806) is supported only on virtual filer 0. They are otherwise mutually exclusive.

SnapMirror (#7807 and #7857): This feature enables the SnapMirror licensed function provided the customer has applied a feature activation code that is made available by IBM. SnapMirror is designed to replicate data between one or more N series storage controllers. It is designed to continually update the mirrored data to help keep it current and available for disaster recovery, offloading tape backup, read-only data distribution, testing on nonproduction systems, and online data migration. This feature is also used for maintenance billing purposes.

The corequisite 2870 feature number must be purchased to establish authorization for use of the SnapMirror licensed function before the feature activation code is provided by IBM.

SnapLock Compliance (#7808 and #7858): This feature enables the SnapLock Compliance licensed function provided the customer has applied a feature activation code that is made available by IBM. This feature is also used for maintenance billing purposes.

The corequisite 2870 feature number must be purchased to establish authorization for use of the SnapLock Compliance licensed function before the feature activation code is provided by IBM.

SnapLock Enterprise (#7809 and #7859): This feature enables the SnapLock Enterprise licensed function provided the customer has applied a feature activation code that is made available by IBM. SnapLock Enterprise is designed to provide high performance and high-security data permanence to disk-based primary and secondary N7800 storage subsystems. An integrated element of the proven IBM Data ONTAP operating system, SnapLock software is designed to support the accuracy, integrity, and security of data by helping prevent the alteration of business records and allow rapid online access for long periods of time. SnapLock Enterprise allows administrators to delete entire SnapLock Enterprise volumes. However, it is designed to prevent any SnapLock Enterprise user or administrator from deleting or modifying individual SnapLock Enterprise WORM records. This feature is also used for maintenance billing purposes.

The corequisite 2870 feature number must be purchased to establish authorization for use of the SnapLock Enterprise licensed function before the feature activation code is provided by IBM.

SnapMover (#7860 — Model A20 only): This feature enables the SnapMover licensed function provided the customer has applied a feature activation code that is made available by IBM. SnapMover is designed to provide a no-copy data migration solution for workload distribution among N series storage controllers sharing common backend storage while avoiding impact to data availability and disruption to users. This helps organizations to efficiently address evolving storage and performance requirements while maintaining user productivity. This feature is also used for maintenance billing purposes.

The corequisite 2870 feature number must be purchased to establish authorization for use of the SnapMover licensed function before the feature activation code is provided by IBM.

SnapRestore (#7811 and #7861): This feature enables the SnapRestore licensed function provided the customer has applied a feature activation code that is made available by IBM. SnapRestore is designed to help an enterprise to recover from data loss that may occur due to user error, viruses, or many other disasters. SnapRestore is designed to help users recover data, from individual files to multi-terabyte volumes, using snapshot copies to help allow quick resumption of operations. This feature is also used for maintenance billing purposes.

The corequisite 2870 feature number must be purchased to establish authorization for use of the SnapRestore licensed function before the feature activation code is provided by IBM.

SnapVault features

SnapVault provides a centralized disk-based backup solution for heterogeneous storage environments. Storing backup data in multiple snapshot copies on the SnapVault secondary storage system from multiple SnapVault primary systems helps let enterprises keep weeks of backups online for fast restoration. Backing up multiple SnapVault primary storage systems to a single SnapShot copy on a large SnapVault secondary storage system can help allow enterprises to centralize their backup and restore operations in a single location. SnapVault primary storage systems can be local or remote N7800 storage controllers, Windows servers, or UNIX servers connected via a LAN or a WAN. The SnapVault secondary storage system can also be located at a remote disaster recovery site to help protect against production site failures.

SnapVault Primary (#7812 and #7862): This feature enables the SnapVault Primary licensed function provided the customer has applied a feature activation code that is made available by IBM. This feature is also used for maintenance billing purposes.

The corequisite 2870 feature number must be purchased to establish authorization for use of the SnapVault Primary licensed function before the feature activation code is provided by IBM.

SnapVault Secondary (#7813 and #7863): This feature enables the SnapVault Secondary licensed function provided the customer has applied a feature activation code that is made available by IBM. This feature is also used for maintenance billing purposes.

The corequisite 2870 feature number must be purchased to establish authorization for use of the SnapVault Secondary licensed function before the feature activation code is provided by IBM.

LockVault Compliance (#7814 and #7864): This feature enables the LockVault licensed function provided the customer has applied a feature activation code that is made available by IBM. This feature is also used for maintenance billing purposes.

The corequisite 2870 feature number must be purchased to establish authorization for use of the LockVault licensed function before the feature activation code is provided by IBM.

LockVault Enterprise (#7815 and #7865): This feature enables the LockVault licensed function provided the customer has applied a feature activation code that is made available by IBM. LockVault Enterprise is designed to support backup and disaster recovery, helping deliver comprehensive, integrated data protection for unstructured data. LockVault integrates SnapLock Enterprise and SnapVault technologies to create a solution specifically designed to help address compliance issues for unstructured data. LockVault is designed to allow customers to make WORM backups of their unstructured data, by simply copying and storing only the unique blocks that have been written since the most recent incremental backup. This feature is also used for maintenance billing purposes.

The corequisite 2870 feature number must be purchased to establish authorization for use of the LockVault licensed function before the feature activation code is provided by IBM.

SyncMirror (#7816 and #7866): This feature is designed to provide the capability to create and maintain a mirror copy of data on another N7800 storage controller. SyncMirror is designed to provide local synchronous data replication capability. By maintaining two copies of data online, SyncMirror is designed to help protect your data against hardware outages, including triple disk failure. When used with the IBM N7800 Clustered Failover high-availability solution, SyncMirror is designed to help you to achieve a high level of data availability. Both N7800 storage controllers must have the same configuration.

This feature enables the SyncMirror licensed function provided the customer has applied a feature activation code that is made available by IBM. This feature is also used for maintenance billing purposes.

The corequisite 2870 feature number must be purchased to establish authorization for use of the SyncMirror licensed function before the feature activation code is provided by IBM.

SnapValidator (#7817 and #7867): This feature enables the SnapValidator licensed function provided the customer has applied a feature activation code that is made available by IBM. SnapValidator is tightly integrated with the Oracle Database architecture and complies with the Oracle HARD initiative. It is designed to detect and prevent potential corruptions of Oracle data before they happen. By adding intelligence and database awareness to modular storage systems (across SAN/iSAN and NAS protocols) IBM N7800 SnapValidator helps to enable advanced database protection functionality to a broader array of organizations. This feature is also used for maintenance billing purposes.

The corequisite 2870 feature number must be purchased to establish authorization for use of the SnapValidator licensed function before the feature activation code is provided by IBM.

Fibre Channel Protocol (#7818 and #7868): This feature enables the Fibre Channel Protocol licensed function which is designed to provide connectivity to clients that transfer data via the FCP protocol provided the customer has applied a feature activation code that is made available by IBM. This feature is also used for maintenance billing purposes.

The corequisite 2870 feature number must be purchased to establish authorization for use of the Fibre Channel Protocol licensed function before the feature activation code is provided by IBM.

Note: The combination of Fibre Channel Protocol (#7817 and #7869) and MultiStore (#7805 and #7856) is supported only on virtual filer 0. They are otherwise mutually exclusive.

(#7870) Disk Sanitization (#7819 and #7869): This feature enables the Disk Sanitization licensed function provided the customer has applied a feature activation code that is made available by IBM. This feature is also used for maintenance billing purposes.

The corequisite 2870 feature number must be purchased to establish authorization for use of the Fibre Channel Protocol licensed function before the feature activation code is provided by IBM.

SnapManager/Exchange — Filer (#7820 and #7870): This feature enables the SnapManager/Exchange — Filer licensed function provided the customer has applied a feature activation code that is made available by IBM. IBM SnapManager for Microsoft™ Exchange is a comprehensive data management solution designed to streamline storage management while simplifying configuration, backup, and restore operations for Exchange databases. Deployed in combination with N7800 storage systems, SnapManager software is designed to provide near-instantaneous hot backups and rapid restores to help you achieve a combination of availability, scalability, performance, and reliability for Exchange environments.

This feature allows connectivity of any number of exchange servers to one N7800 storage controller.

This feature is also used for maintenance billing purposes.

This feature allows connection of any number of exchange servers to a storage controller.

The corequisite 2870 feature number must be purchased to establish authorization for use of the Fibre Channel Protocol licensed function before the feature activation code is provided by IBM.

SnapManager/SQL — Filer (#7821 and #7871): This feature enables the SnapManager/SQL — Filer licensed function provided the customer has applied a feature activation code that is made available by IBM. IBM SnapManager for Microsoft SQL is a comprehensive data management solution designed to streamline storage management while simplifying configuration, backup, and restore operations for Exchange databases. Deployed in combination with N7800 storage systems, SnapManager software is designed to provide near-instantaneous hot backups and rapid restores to help you achieve a combination of availability, scalability, performance, and reliability for SQL environments.

This feature allows connectivity of any number of SQL servers to one N7800 storage controller.

This feature is also used for maintenance billing purposes.

This feature allows connection of any number of SQL servers to a storage controller.

The corequisite 2870 feature number must be purchased to establish authorization for use of the Fibre Channel Protocol licensed function before the feature activation code is provided by IBM.

near-line Function (#7822 and #7872): This feature is designed to increase the number of concurrent backup streams available to an N series storage controller supporting OSSV as a backup tool.

MetroCluster (#7873 — Model A20 only): This feature is an integrated, high-availability, and business-continuance solution designed to leverage proven technologies from IBM. It expands the capabilities of the IBM N series portfolio of high-availability and disaster recovery solutions — a portfolio that includes failover, data replication, and backup solutions. MetroCluster is designed to be a simple-to-administer solution that extends failover capability from within a data center to a remote site. It is also designed to provide replication of data from the primary site to a remote site, helping keep data at the remote site current. The combination of failover and data replication aids in the recovery from disaster — helping prevent loss of data — in less time than otherwise possible.

Host software

SnapDrive for AIX

These features provide a software application designed to enhance the storage management capabilities in an AIX environment, including easier dynamic volume management, cluster management, snapshot management, and replication management. One feature must be ordered for each host on which the feature will be installed.

Notes

  • Use of these features with FCP attachment requires the FCP Protocol feature, #7818 or #7868, on the N7800, as well as corequisite features #8110 and #8119.
  • If running with iSCSI, the iSCSI Host Support Kit is required. The iSCSI Host Support Kit is available for download from

SnapDrive — AIX 1-2 Procs (#8000): This feature provides SnapDrive for AIX support for a single host with 1 or 2 processors.

SnapDrive — AIX 3-4 Procs (#8001): This feature provides SnapDrive for AIX support for a single host with 3 or 4 processors.

SnapDrive — AIX 5-8 Procs (#8002): This feature provides SnapDrive for AIX support for a single host with 5, 6, 7, or 8 processors.

SnapDrive — AIX 9+ Procs (#8003): This feature provides SnapDrive for AIX support for a single host with 9 or more processors.

SnapDrive for HP-UX

These features provide a software application designed to enhance the storage management capabilities in an HP-UX environment, including easier dynamic volume management, cluster management, snapshot management, and replication management. One feature must be ordered for each host on which the feature will be installed.

Note: Use of these features with FCP attachment requires the FCP Protocol feature, #7818 or #7868, on the N7800, as well as corequisite #8121.

Note: If running with iSCSI, the iSCSI Host Support Kit is required. The iSCSI Host Support Kit is available for download from

SnapDrive — HPUX 1-2 Procs (#8004): This feature provides SnapDrive for HPUX support for a single host with 1 or 2 processors.

SnapDrive — HPUX 3-4 Procs (#8005): This feature provides SnapDrive for HPUX support for a single host with 3 or 4 processors.

SnapDrive — HPUX 5-8 Procs (#8006): This feature provides SnapDrive for HPUX support for a single host with 5 to 8 processors.

SnapDrive — HPUX 9+ Procs (#8007): This feature provides SnapDrive for HPUX support for a single host with 9 or more processors.

SnapDrive for Solaris

These features provide a software application designed to enhance the storage management capabilities in a Solaris environment, including easier dynamic volume management, cluster management, snapshot management, and replication management. One feature must be ordered for each host on which the feature will be installed.

Note: Use of these features with FCP attachment requires the FCP Protocol feature, #7818 or #7868, on the N7800, as well as corequisite #8122.

Note: If running with iSCSI, the iSCSI Host Support Kit is required. The iSCSI Host Support Kit is available for download from

SnapDrive — Solaris 1-2 Proc (#8008): This feature provides SnapDrive for Solaris support for a single host with 1 or 2 processors.

SnapDrive — Solaris 3-4 Proc (#8009): This feature provides SnapDrive for Solaris support for a single host with 3 or 4 processors.

SnapDrive — Solaris 5-8 Proc (#8010): This feature provides SnapDrive for Solaris support for a single host with 5 to 8 processors.

SnapDrive — Solaris 9+ Procs (#8011): This feature provides SnapDrive for Solaris support for a single host with 9 or more processors.

SnapDrive for Linux

These features provide a software application designed to enhance the storage management capabilities in a Linux environment, including easier dynamic volume management, cluster management, snapshot management, and replication management. One feature must be ordered for each host on which the feature will be installed.

These features are supported only for iSCSI; they are not supported for Fibre Channel Protocol. iSCSI Host Support Kits must be installed on the N7800. The iSCSI Host Support Kit is available for download from

SnapDrive — Linux 1-2 Procs (#8020): This feature provides SnapDrive for Linux support for a single host with 1 or 2 processors.

SnapDrive — Linux 3-4 Procs (#8021): This feature provides SnapDrive for Linux support for a single host with 3 or 4 processors.

SnapDrive — Linux 5-8 Procs (#8022): This feature provides SnapDrive for Linux support for a single host with 5 to 8 processors.

SnapDrive — Linux 9+ Procs (#8023): This feature provides SnapDrive for Linux support for a single host with 9 or more processors.

SnapDrive for UNIX Media Kit (#8040): This feature provides a physical media kit that includes SnapDrive for Linux, Solaris, AIX, and HP-UX.

SnapDrive for Windows (#8050): This feature provides SnapDrive for Windows function. One feature must be ordered for each host on which it will be installed. It provides a software application that is designed to enhance the storage management capability in a Windows environment, including easier management of dynamic volume management, cluster management, snapshot management, and replication management.

Note: If running with FCP, features 8100 and 8101 are corequisites. If running with iSCSI, the iSCSI Host Support Kit is required. The iSCSI Host Support Kit is available for download from

SnapDrive for Windows Media Kit (#8051): This feature provides a physical media kit that includes SnapDrive for Windows. This feature is required when ordering #8050.

FCP Host Attach Kit — Windows (#8100): This feature provides a Host Attach kit for Windows that includes drivers, support scripts, installation scripts, and documentation. One kit must be ordered for each host that is to be attached via FCP.

FCP Multipathing Dvr — Win (#8101): This feature provides a multipathing driver for the Windows FCP Host Attach Kit, for use if SnapDrive for Windows is not already installed or ordered.

Base FCP Host Atch Kit — AIX (#8110): This feature provides the base Host Attach Kit for AIX that includes drivers, support scripts, installation scripts and documentation. If multipathing support is desired, the AIX Multipathing Support feature that corresponds to the appropriate number of processors on the host should be ordered.

AIX Multipathing — 1-2 Procs (#8111): This feature enables AIX multipathing support for a single host with one or two processors. You must also order the Base FCP Host Attach Kit for AIX if this feature is ordered.

AIX Multipathing — 3-4 Procs (#8112): This feature enables AIX multipathing support for a single host with three or four processors. You must also order the Base FCP Host Attach Kit for AIX if this feature is ordered.

AIX Multipathing — 5-8 Procs (#8113): This feature enables AIX multipathing support for a single host with five to eight processors. You must also order the Base FCP Host Attach Kit for AIX if this feature is ordered.

AIX Multipathing — 9+ Procs (#8114): This feature enables AIX multipathing support for a single host with nine or more processors. You must also order the Base FCP Host Attach Kit for AIX if this feature is ordered.

AIX Media Kit for Multipath (#8119): This feature provides a physical media kit that includes DotHill Multipathing Drivers for AIX. It should be ordered when you cannot download the Media Kit from the NAS support site, or simply require the software on physical media.

FCP Host Attach Kit — Linux (#8120): This feature provides a Host Attach Kit for Linux that various drivers, support scripts, installation scripts, and documentation.

FCP Host Atch Kit — HPUX (#8121): This feature provides a software application designed to enhance the storage management capabilities in an HP-UX environment, including easier dynamic volume management, cluster management, snapshot management, and replication management. One feature must be ordered for each host on which the feature will be installed.

FCP Host Atch Kit — Solaris (#8122): This feature provides a software application designed to enhance the storage management capabilities in a Solaris environment, including easier dynamic volume management, cluster management, snapshot management, and replication management. One feature must be ordered for each host on which the feature will be installed.

SnapManager/Exchange — Host (#8131): This feature allows connection of one exchange host server to a storage controller. One of this feature is required for each exchange host. The Fibre Channel Protocol feature or iSCSI must be installed on the attached storage controller.

SnapManager/Exch — Media Kit (#8132): This feature provides the physical media kit for SnapManager for Exchange. Only one media kit is needed for a single SnapManager for Exchange — Filer or Host license. You may order more than one, but a single media kit may be installed on multiple hosts or storage controllers.

SnapManager for SQL — Host (#8141): This feature allows connection of one SQL host server to a storage controller. One of this feature is required for each SQL host. The Fibre Channel Protocol feature or iSCSI must be installed on the attached storage controller.

SnapManager/SQL — Media Kit (#8142): This feature provides the physical media kit for SnapManager for SQL. Only one media kit is needed for a single SnapManager for SQL — Filer or Host license. You may order more than one, but a single kit may be installed on multiple hosts or storage controllers.

Single Mailbox Recovery

Single Mail Box Recovery for Microsoft Exchange (SMBR) software can help provide rapid recovery of single mail boxes, individual folders, or single messages from a valid SnapManager backup to the production Exchange server, to any offline Exchange server, or to an Outlook .pst file. The software can help save time and money by avoiding the need for cumbersome and disk-intensive brick-level backups or investments in a dedicated recovery server infrastructure.

Single Mbox Recovery 100 pk (#8150): This feature provides support for 100 mailboxes.

Single Mbox Recovery 500 pk (#8151): This feature provides support for 500 mailboxes.

Single Mbox Recovery 1000 pk (#8152): This feature provides support for 1,000 mailboxes.

Single Mbox Recovery 2500 pk (#8153): This feature provides support for 2,500 mailboxes.

Single Mbox Recovery 5K pk (#8154): This feature provides support for 5,000 mailboxes.

Single Mbox Recovery 10K pk (#8155): This feature provides support for 10,000 mailboxes.

Single Mbox Recovery 50K pk (#8156): This feature provides support for 50,000 mailboxes.

Single Mbox Recovery Med Kt (#8157): This feature provides the physical media kit for Single Mailbox Recovery. Only one media kit is needed for a single Single Mailbox Recovery license. You may order more than one, but a single media kit may be installed on multiple Exchange Hosts.

SMBR CA-ARCSERVE Extract Wiz (#8158): The CA-ARCSERVE Extract Wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server.

SMBR Tivoli Tape Extract Wiz (#8159): The Tivoli Extract Wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server.

SMBR Legato Tape Extract Wiz (#8160): The Legato Extract Wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server.

SMBR NetBackup Extract Wiz (#8161): The NetBackup Extract Wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server.

SMBR PST Tape Extract Wiz (#8162): The PST Extract Wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server.

SMBR HP Extract Wiz (#8163): The HP Extract Wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server.

Data Fabric Manager Core (#8250): This feature is designed to provide a central point of control and to provide alerts, reports, and configuration tools. These tools are designed to help manage storage and content delivery infrastructure, consistent with business requirements, and help maximize availability and reduce total cost of ownership.

Data Fabric Manager Core provides the license allowing the use of this feature on the storage controller for which it is ordered in support of some predefined number of nodes. On the initial order, the number (quantity) of this feature ordered defines the number of nodes for which the feature is authorized. That number may be incremented via a subsequent (MES) order by ordering the incremental number of feature #8250. That is, if the number of nodes to be supported is to be incremented by ten, the number of feature #8250 that must be ordered in the MES order is ten.

For the initial order of this feature, a key is provided allowing DFM support of the number of nodes specified. When the number of nodes is incremented by a subsequent order, a new key is assigned allowing use of DFM for the new total number of nodes. The old key is rendered obsolete.

This feature requires the DFM Media Kit (#8254).

DFM Bus. Continuance Option (#8252): This feature provides advanced function for Data Fabric Manager. It is designed to help you minimize downtime by notifying you that customized preset thresholds and conditions have exceeded operational limits.

This feature requires the Data Fabric Manager Core feature (#8250).

DFM Store Resource Mgmt Opt (#8253): This feature provides advanced function of Data Fabric Manager. It is designed to provide detailed storage utilization reports to aid capacity planning, consumption management, data migration, and chargeback.

This feature requires the Data Fabric Manager Core feature (#8250).

DFM Media Kit (#8254): This feature provides the media kit required by DFM. One media kit supports multiple hosts.

Power (line) cord features

These features provide two line cords for Model A10, four for Model  A20, to supply external power to the N7800. One power cord feature must be specified, either the PDU power cord for IEC 320, sheet C13 outlets, or one based on the country or region in which the system will be installed.

Feature  Description
 
9000     PDU Pwr Cord, 42U Rack
9001     Power Cord, Cont. Europe
9002     Power Cord, UK
9003     Power Cord, Japan
9004     Power Cord, North America
9005     Power Cord, Australia/N.Z.
9006     Power Cord, Switzerland
9007     Power Cord, Argentina
9008     Power Cord, China
9009     Power Cord, Denmark
9010     Power Cord, India/S. Africa
9011     Power Cord, Israel
9012     Power Cord, Italy
9013     Power Cord, N. America 250V
9014     Power Cord, Brazil
9015     Power Cord, Taiwan
9016     Power Cord, Taiwan 250V

Miscellaneous hardware features

Field Install Rack Mount Kit (#9202): This feature specifies that the N5200 is to be installed in the field in a customer-provided rack. Rack mounting hardware is included. This is a required feature.

IGF Transaction Indicator (#9556): This specify feature is used to designate that a new N5200 Model G10 or Model G20 is involved in an IBM Global Financing transaction (lease or financing). It is for administrative purposes only.

For a new N5200 order that includes #7xxx licensed function features (excluding feature #7000 or #7100), the IGF Transaction Indicator feature must be ordered as a Record Purposes Only (RPO) MES to the N5200. This feature is field-install only and cannot be included on the N5200 initial order.

This feature should not be used for any other #7xxx licensed function transactions. It is not required when adding additional #7xxx licensed functions to an installed N5200.

Configuration specify features

Feature #9557, #9558, and #9559 must be specified to verify that sufficient Fibre Channel ports (and sufficient FC HBA for Disk, Dual-port adapters, #1004) are included in the initial order for an N7800 storage controller.

For a Model A10, the maximum number of feature #9557 that may be specified is 16 and the total of feature #9558 and #9559 may not exceed 8.

For a Model A20, the maximum number of feature #9557 that may be specified is 16 and the total of features #9558 and #9559 may not exceed 10.

Number of FC Target Ports (#9557): This no-charge feature specifies the number of onboard Fibre Channel ports that are to be configured as FCP target ports. Target ports added via feature number 1017 must not be included in this number. FCP target ports are used for Fibre Channel attachment of the N7800 to application servers (containing Fibre Channel HBAs) or to Fibre Channel storage area networks.

This feature is only relevant if you intend to use the Fibre Channel Protocol feature on the N7800. For a Model A10, valid choices are 0, 2, 4, and 8. For a Model A20, valid choices are 0, 4, 8, and 16.

Number of FC Storage Loops (#9558): This no-charge feature specifies, on the initial order of an N7800 storage controller, the number of dual-path Fibre Channel storage loops that are to be configured for the attachment of EXN2000 storage expansion units. The EXN2000 expansion units, included in the initial order, will be distributed across the specified number of storage loops.

Number of SATA Storage Loops (#9559): This no-charge feature specifies, on the initial order of an N7800 storage controller, the number of dual-path Fibre Channel storage loops that are to be configured for the attachment of EXN1000 SATA storage expansion units. The EXN1000 expansion units, included in the initial order, will be distributed across the specified number of storage loops.
 
Back topBack to top
 

Publications

The following publications are shipped with the product. Additional copies will be available immediately.

                                   Order
Title                              number

Shipped in hardcopy:

IBM System Storage N7600 and       GC26-7954
 N7800 Filer Installation and
 Setup Instructions
 
IBM System Storage N Series        GC26-7986
 Statement of Limited Warranty
 (in 9 Languages)
 
IBM Translated Safety Notices      GA27-4338

Shipped on CD-ROM:

IBM System Storage N Series        GC26-7987
 Statement of Limited Warranty
 (in 29 Languages)
 
IBM System Storage N7600 and       GC26-7953
 N7800 Hardware and Service Guide
 
IBM System Storage EXN1000         GC26-7802
 Storage Expansion Unit Hardware
 and Service Guide
 
IBM System Storage EXN2000         GA32-0516
 Storage Expansion Unit Hardware
 and Service Guide

On the Web, all above, and:

IBM System Storage N series        GC26-7787
 Error Messages and
 Troubleshooting Guide
 
IBM System Storage N series        GC26-7791
 Software Upgrade Guide
 
IBM System Storage N series        GA32-0543
 Introduction and Planning Guide
 
IBM System Storage N series        GC26-7789
 Diagnostics Guide
 
IBM System Storage N series        GA32-0521
 Storage Management Guide

All publications are available to be ordered. To order, contact your IBM representative.

The Publication Notification System (PNS) is available by order number/product number. Customers currently subscribing to PNS will automatically receive notifications by e-mail. Customers who want to subscribe can visit the PNS Web site location at

The publications listed on the notification can be ordered by calling the Pubs Support Group in Raleigh at 800-879-2755, option 1.

The IBM Publications Center Portal

The Publications Center is a worldwide central repository for IBM product publications and marketing material with a catalog of 70,000 items. Extensive search facilities are provided, as well as payment options via credit card. A large number of publications are available online in various file formats, which can currently be downloaded free of charge.

Note that PNS subscribers most often order their publications via the Publication Center.

Displayable softcopy publications

All product publications are offered in displayable softcopy form. Software and optional features publications related to this product can also be downloaded from the IBM Network Attached Storage (NAS) Support Web site at

Click the specific product or feature link, select the Install and Use tab, and then click the documentation link to see the publications available for the selected product or feature.
 
Back topBack to top
 

Services

IBM Integrated Technology Services

IBM services include business consulting, outsourcing, hosting services, applications, and other technology management.

These services help you learn about, plan, install, manage, or optimize your IT infrastructure to be an On Demand Business. They can help you integrate your high-speed networks, storage systems, application servers, wireless protocols, and an array of platforms, middleware, and communications software for IBM and many non-IBM offerings. IBM is your one-stop shop for IT support needs.

For details on available services, contact your IBM representative or visit

For details on available IBM Business Continuity and Recovery Services, contact your IBM representative or visit

For details on education offerings related to specific products, visit

Select your country, and then select the product as the category.
 
Back topBack to top
 

Technical information

Specified operating environment

Physical specifications

IBM System Storage N7800 (per node)

  • Width: 446 mm (17.6 in)
  • Depth:
    • 782 mm (30.8 in) with cable management tray
    • 695 mm (27.4 in) without cable management tray
  • Height: 263 mm (10.4 in)
  • Weight: 54.8 kg (121 lb)

To assure installability and serviceability in non-IBM industry standard racks, review the installation planning information for any product specific installation requirements.

Standards

Safety

  • EN 60950: 2000
  • CE Mark (EU)
  • UL60950-2000
  • CSA 60950-00
  • CB IEC 60950 Ed.3 (world-wide)
  • EN60825-1: 1994+A11
  • IRAM
  • GOST-R
  • NOM (Mexico)

EMC

  • FCC Class A
  • EN55022: 1998
  • EN61000-3-2
  • EN61000-3-3
  • CE
  • ACA C-Tick
  • VCCI

Immunity

  • EN55024: 1998

Operating environment

  • Temperature:
    • Maximum range: 10° to 40°C (50° to 104°F)
    • Recommended: 20° to 25°C (68° to 77°F)
    • Non-operating: -40° to 65°C (-40° to 149°F)
  • Relative humidity:
    • Recommended operating range: 40% to 55%
    • Maximum wet bulb: 28°C
    • Maximum altitude: 2133 m (7,000 ft.)

      Note: Operating at extremes of environment may increase failure probability.

  • Relative humidity: 10% to 90% (percent, non-condensing)
  • Wet bulb (caloric value): 1,215 Btu/hr (fully loaded shelf)
  • Maximum electrical power: 100-240 V ac, 12-6 A, 50/60 Hz
  • Nominal electrical power:
    • 100 to 120 V ac, 4 A
    • 200 to 240 V ac, 2 A
  • Noise level:
    • 49 dBa @ 1 m @ 23°C
    • 5 bels @ 1 m @ 23°C

Hardware requirements

Licensed machine code (LMC)

The N7800 requires LMC level 7.2, or later. Some N7800 features and functions may not be available or supported in all environments. Current information on supported environments, prerequisites, and minimum operating systems levels is available at

Current license terms for the machine code provided with this product prohibit transfer of the machine code without approval from Network Appliance.

Licensed functions

Data ONTAP (feature number 7800 or 7850) is required on the N7800.

Licensed functions require the selection of N7800 Model A10 or A20 features and the acquisition of the corresponding IBM 2870 Model 671 or Model 672 function authorization features.

Software requirements

Current information on servers, operating systems, host adapters, and connectivity products supported by the N7800 is available at

Limitations

  • The N7800 is supported only in rack installations.
  • This product is functional with the iSeries™ and OpenPower™ platforms. However, on the iSeries, support is available only on Linux on Power and AIX partitions, not i5/OS™.
  • Current license terms for the machine code provided with this product prohibit transfer of the machine code without approval from Network Appliance.

Planning information

Customer responsibilities: Following good safety practice, IBM recommends that three or more persons install this product.

Physical configuration and installation planning for the 2866 is a customer responsibility. Information about physical configuration and installation requirements, including equipment, site, and power requirements, can be found in the IBM System Storage N7600 and N7800 Filer Installation and Setup Instructions (GC26-7954).

A customer-supplied Ethernet cable is required to connect the machine to a server or Ethernet network.

Cable orders: Fibre Channel cables are required to connect an expansion unit to a 2866 system. Cables can be purchased using expansion unit features.

For the two-node Model A20, cluster cables are required to connect the nodes.

Installability: Estimated time to unpack an IBM System Storage N7800, install it in the rack, and perform a simple discovery and configuration is two hours.

Security, auditability, and control

This product uses the security and auditability features of host hardware, host software, and/or application software to which it is attached.

The customer is responsible for evaluation, selection, and implementation of security features, administrative procedures, and appropriate controls in application systems and communications facilities.
 
Back topBack to top
 

Terms and conditions

Volume orders: Contact your IBM representative.

IBM Global Financing: Yes

Warranty period: Three years

Warranty service: If required, IBM provides repair or exchange service depending on the types of warranty service specified for the machine. IBM will attempt to resolve your problem over the telephone, or electronically via an IBM Web site. You must follow the problem determination and resolution procedures that IBM specifies. Scheduling of service will depend upon the time of your call and is subject to parts availability. If applicable to your product, parts considered Customer Replaceable Units (CRUs) will be provided as part of the machine's standard warranty service.

Service levels are response time objectives and are not guaranteed. The specified level of warranty service may not be available in all worldwide locations. Additional charges may apply outside IBM's normal service area. Contact your local IBM representative or your reseller for country and location specific information. This product is covered by the following types of service.

CRU service and on-site for other selected parts

CRU service

IBM provides replacement CRUs to you for you to install. CRU information and replacement instructions are shipped with your machine and are available from IBM upon your request. CRUs are designated as being either a Tier 1 or a Tier 2 CRU.

Tier 1 CRU

Installation of Tier 1 CRUs is your responsibility. If IBM installs a Tier 1 CRU at your request, you will be charged for the installation.

For machines with on-site same-day response service, IBM will replace a Tier 1 CRU part at your request, at no additional charge.

Tier 2 CRU

You may install a Tier 2 CRU yourself or request IBM to install it, at no additional charge.

Based upon availability, CRUs will be shipped for next business day delivery. IBM specifies, in the materials shipped with a replacement CRU, whether a defective CRU must be returned to IBM. When return is required, (1) return instructions and a container is shipped with the replacement CRU and (2) you may be charged for the replacement CRU if IBM does not receive the defective CRU within 30 days of your receipt of the replacement.

The following parts have been designated as Tier 1 CRU parts:

  • AC power cord
  • AC power supply
  • Disk drive
  • Cables
  • Memory modules
  • Wrap plug
  • Operator panel

On-site service

IBM will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well lit, and suitable for the purpose.

  • 9 hours per day, Monday through Friday, excluding holidays, next-business-day response

Warranty service upgrades and maintenance service options

Warranty service upgrades: During the warranty period, warranty service upgrades provide an enhanced level of on-site service for an additional charge. A warranty service upgrade must be purchased during the warranty period and is for a fixed term (duration). It is not refundable or transferable and may not be prorated. If required, IBM will provide the warranty service upgrade enhanced level of on-site service acquired by the customer. Service levels are response time objectives and are not guaranteed.

IBM will attempt to resolve your problem over the telephone or electronically by access to an IBM Web site. You must follow the problem determination and resolution procedures that IBM specifies. Scheduling of service will depend upon the time of your call and is subject to parts availability.

On-site service

IBM will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well lit, and suitable for the purpose. The following service selections are available as warranty upgrades for your machine type.

  • 9 hours per day, Monday through Friday, excluding holidays, 4-hour average, same-business-day response, IOR
  • 24 hours per day, 7 days a week, 4-hour average response, IOR
  • 24 hours per day, 7 days a week, 2-hour average response, IOR

CRUs may be provided as part of the machine's standard warranty CRU service except that you may install a CRU yourself or request IBM installation, at no additional charge, under one of the on-site service levels specified above. For additional information on the CRU service, refer to warranty information.

Maintenance services

If required, IBM provides repair or exchange service depending on the types of maintenance service specified for the machine. IBM will attempt to resolve your problem over the telephone or electronically, via an IBM Web site. You must follow the problem determination and resolution procedures that IBM specifies. Scheduling of service will depend upon the time of your call and is subject to parts availability. Service levels are response time objectives and are not guaranteed. The specified level of maintenance service may not be available in all worldwide locations. Additional charges may apply outside IBM's normal service area. Contact your local IBM representative or your reseller for country and location specific information. The following service selections are available as maintenance options for your machine type.

On-site service

IBM will repair the failing machine at your location and verify its operation. You must provide suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well lit, and suitable for the purpose.

  • 9 hours per day, Monday through Friday, excluding holidays, next-business-day response, IOR
  • 9 hours per day, Monday through Friday, excluding holidays, 4 hour average response, IOR
  • 24 hours per day, 7 days a week, 4-hour average response, IOR
  • 24 hours per day, 7 days a week, 2-hour average response, IOR

CRUs

If your problem can be resolved with a CRU (for example, keyboard, mouse, speaker, memory, or hard disk drive), and depending upon the maintenance service offerings in your geography, IBM will ship the CRU to you for you to install. CRU information and replacement instructions are shipped with your machine and are available from IBM upon your request.

Based upon availability, CRUs will be shipped for next business day delivery. IBM specifies, in the materials shipped with a replacement CRU, whether a defective CRU must be returned to IBM. When return is required, (1) return instructions and a container is shipped with the replacement CRU and (2) you may be charged for the replacement CRU if IBM does not receive the defective CRU within 30 days of your receipt of the replacement.

CRUs may be provided as part of the machine's standard maintenance service except that you may install a CRU yourself or request IBM installation, at no additional charge, under any of the on-site service levels specified above.

Usage plan machine: No

IBM hourly service rate classification

One

When a type of service involves the exchange of a machine part, the replacement may not be new, but will be in good working order.

Field-installable features: Yes

Model conversions: Yes

Machine installation: Installation is performed by IBM. IBM will install the machine in accordance with the IBM installation procedures for the machine. In the United States, contact IBM at 800-IBM-SERV (426-7378), in other countries contact the local IBM office.

The Machine Installation Guide specifies site preparation, physical requirements and installation (operating) environment, and any cabling included in the installation along with the approximate installation time in hours. Customer requests for installation of items not covered in the installation guide may be performed at IBM's hourly service rate designated for the machine.

Graduated Program License Charges apply: No

Licensed machine code: This product contains, or is provided together with, code which is licensed to the user, not sold. That code is copyrighted and may be the property of IBM, its suppliers or other third parties. You are authorized to use the code to the extent set forth in the applicable license agreement provided with the product. You may also obtain a copy of applicable license agreement by contacting your IBM representative.

Current license terms for the machine code provided with this product prohibit transfer of the machine code without approval from Network Appliance.

Machines using machine code: 2867-A10, 2867-A20

IBM may release changes to the machine code. IBM plans to make the machine code changes available for download from the IBM System Storage technical support Web site

If the machine does not function as warranted and your problem can be resolved through your application of downloadable machine code, you are responsible for downloading and installing these designated machine code changes as IBM specifies. If you would prefer, you may request IBM to install downloadable machine code changes; however, you may be charged for that service.

Educational allowance available

A reduced charge is available to qualified education customers. The educational allowance may not be added to any other discount or allowance.
 
Back topBack to top
 

Prices

The prices provided in this announcement are suggested retail prices for the U.S. only and are provided for your information only. Dealer prices may vary, and prices may also vary by country. Prices are subject to change without notice. For additional information and current prices, contact your local IBM representative.

Product charges

                         Machine            Feature  Purchase
Description              type     Model     number   price
 
N7800 Model A10          2867     A10                $178,200
N7800 Model A20          2867     A20                 285,000
1-Port 10GbE TOE NIC     2867     A10, A20  1008       15,000
4-Port Cu GbE TOE NIC    2867     A10, A20  1009        5,800
2-Port iSCSI Target      2867     A10, A20  1010        2,000
 CU NIC
2-Port iSCSI Target      2867     A10, A20  1011        2,300
 Fi NIC
2-Port Fiber GbE NIC     2867     A10, A20  1012        2,195
2-Port Cu GbE NIC        2867     A10, A20  1013          950
4-Gbps FC HBA -- Disk,   2867     A10, A20  1014        4,500
 2-port
4-Gbps FC HBA -- Tape,   2867     A10, A20  1015        4,500
 2-port
SCSI LVD Tape Adapter    2867     A10, A20  1016          600
2-Port 4-Gbps FC         2867     A10, A20  1017        2,300
 HBA-Target
2m Copper Cluster 4X     2867     A20       1037           75
 IB Cbl
5m Copper Cluster 4X     2867     A20       1038           97
 IB Cbl
10m Copper Cluster 4X    2867     A20       1039          178
 IB Cbl
5m Fiber Cluster 4X      2867     A20       1040          139
 IB Cbl
30m Fiber Cluster 4X     2867     A20       1041          320
 IB Cbl
Copper-Fiber Converter   2867     A20       1042          505
5m 50-micron MMF Cable   2867     A10, A20  1045          150
30m 50-micron MMF Cable  2867     A10, A20  1046          250
100-240 V ac Power       2867     A10, A20  1100            0
 Supply

Licensed function indicators

Data ONTAP               2867     A10       7800            0
CIFS                     2867     A10       7801            0
HTTP                     2867     A10       7802            0
NFS                      2867     A10       7803            0
FlexClone                2867     A10       7805            0
MultiStore               2867     A10       7806            0
SnapMirror               2867     A10       7807            0
SnapLock Compliance      2867     A10       7808            0
SnapLock Enterprise      2867     A10       7809            0
SnapRestore              2867     A10       7811            0
SnapVault Primary        2867     A10       7812            0
SnapVault Secondary      2867     A10       7813            0
LockVault Compliance     2867     A10       7814            0
LockVault Enterprise     2867     A10       7815            0
SyncMirror               2867     A10       7816            0
SnapValidator            2867     A10       7817            0
Fibre Channel Protocol   2867     A10       7818            0
Disk Sanitization        2867     A10       7819            0
SnapManager/Exchange     2867     A10       7820            0
 -- Filer
SnapManager/SQL          2867     A10       7821            0
 -- Filer
near-line Function       2867     A10       7822            0
 
Data ONTAP               2867     A20       7850            0
CIFS                     2867     A20       7851            0
HTTP                     2867     A20       7852            0
NFS                      2867     A20       7853            0
CFO                      2867     A20       7854            0
FlexClone                2867     A20       7855            0
MultiStore               2867     A20       7856            0
SnapMirror               2867     A20       7857            0
SnapLock Compliance      2867     A20       7858            0
SnapLock Enterprise      2867     A20       7859            0
SnapMover                2867     A20       7860            0
SnapRestore              2867     A20       7861            0
SnapVault Primary        2867     A20       7862            0
SnapVault Secondary      2867     A20       7863            0
LockVault Compliance     2867     A20       7864            0
LockVault Enterprise     2867     A20       7865            0
SyncMirror               2867     A20       7866            0
SnapValidator            2867     A20       7867            0
Fibre Channel Protocol   2867     A20       7868            0
Disk Sanitization        2867     A20       7869            0
SnapManager/Exchange     2867     A20       7870            0
 -- Filer
SnapManager/SQL          2867     A20       7871            0
 -- Filer
near-line Function       2867     A20       7872            0
MetroCluster             2867     A20       7873            0

Host software

SnapDrive -- AIX         2867     A10, A20  8000            0
 1-2 Procs
SnapDrive -- AIX         2867     A10, A20  8001            0
 3-4 Procs
SnapDrive -- AIX         2867     A10, A20  8002            0
 5-8 Procs
SnapDrive -- AIX         2867     A10, A20  8003            0
 9+ Procs
SnapDrive -- HPUX        2867     A10, A20  8004            0
 1-2 Procs
SnapDrive -- HPUX        2867     A10, A20  8005            0
 3-4 Procs
SnapDrive -- HPUX        2867     A10, A20  8006            0
 5-8 Procs
SnapDrive -- HPUX        2867     A10, A20  8007            0
 9+ Procs
SnapDrive -- Solaris     2867     A10, A20  8008            0
 1-2 Proc
SnapDrive -- Solaris     2867     A10, A20  8009            0
 3-4 Proc
SnapDrive -- Solaris     2867     A10, A20  8010            0
 5-8 Proc
SnapDrive -- Solaris     2867     A10, A20  8011            0
 9+ Procs
SnapDrive -- Linux       2867     A10, A20  8020            0
 1-2 Procs
SnapDrive -- Linux       2867     A10, A20  8021            0
 3-4 Procs
SnapDrive -- Linux       2867     A10, A20  8022            0
 5-8 Procs
SnapDrive -- Linux       2867     A10, A20  8023            0
 9+ Procs
SnapDrive for UNIX       2867     A10, A20  8040            0
 Media Kit
SnapDrive for Windows    2867     A10, A20  8050            0
SnapDrive for Win        2867     A10, A20  8051            0
 Media Kit
FCP Host Attach          2867     A10, A20  8100            0
 
 Kit -- Win
FCP Multipathing         2867     A10, A20  8101            0
 Dvr -- Win
Base FCP Host Atch       2867     A10, A20  8110            0
 Kit -- AIX
AIX Multipathing --      2867     A10, A20  8111            0
 1-2 Procs
AIX Multipathing --      2867     A10, A20  8112            0
 3-4 Procs
AIX Multipathing --      2867     A10, A20  8113            0
 5-8 Procs
AIX Multipathing --      2867     A10, A20  8114            0
 9+ Procs
AIX Media Kit for        2867     A10, A20  8119            0
 Multipath
FCP Host Attach Kit      2867     A10, A20  8120            0
 -- Linux
FCP Host Attach Kit      2867     A10, A20  8121            0
 -- HPUX
FCP Host Atch Kit        2867     A10, A20  8122            0
 -- Solaris
SnapManager/Exchange     2867     A10, A20  8131            0
 -- Host
SnapManager/Exch         2867     A10, A20  8132            0
 -- Media Kit
SnapManager for SQL      2867     A10, A20  8141            0
 -- Host
SnapManager/SQL          2867     A10, A20  8142            0
 -- Media Kit
Single Mbox Recovery     2867     A10, A20  8150            0
 100 pk
Single Mbox Recovery     2867     A10, A20  8151            0
 500 pk
Single Mbox Recovery     2867     A10, A20  8152            0
 1000 pk
Single Mbox Recovery     2867     A10, A20  8153            0
 2500 pk
Single Mbox Recovery     2867     A10, A20  8154            0
 5K pk
Single Mbox Recovery     2867     A10, A20  8155            0
 10K pk
Single Mbox Recovery     2867     A10, A20  8156            0
 50K pk
Single Mbox Recovery     2867     A10, A20  8157            0
 Med Kt
SMBR CA-ARCSERVE         2867     A10, A20  8158            0
 Extract Wiz
SMBR Tivoli Tape         2867     A10, A20  8159            0
 Extract Wiz
SMBR Legato Tape         2867     A10, A20  8160            0
 Extract Wiz
SMBR NetBackup           2867     A10, A20  8161            0
 Extract Wiz
SMBR PST Tape            2867     A10, A20  8162            0
 Extract Wiz
SMBR HP Extract Wiz      2867     A10, A20  8163            0
Data Fabric Manager      2867     A10, A20  8250            0
 Core
DFM Bus. Continuance     2867     A10, A20  8252            0
 Option
DFM Store Resource       2867     A10, A20  8253            0
 Mgmt Opt
DFM Media Kit            2867     A10, A20  8254            0

Power Cords

PDU Pwr Cord, 42U Rack   2867     A10, A20  9000            0
Power Cord, Cont.        2867     A10, A20  9001            0
 Europe
Power Cord, United       2867     A10, A20  9002            0
 Kingdom
Power Cord, Japan        2867     A10, A20  9003            0
Power Cord, North        2867     A10, A20  9004            0
 America
Power Cord, Australia/   2867     A10, A20  9005            0
 N.Z.
Power Cord, Switzerland  2867     A10, A20  9006            0
Power Cord, Argentina    2867     A10, A20  9007            0
Power Cord, China        2867     A10, A20  9008            0
Power Cord, Denmark      2867     A10, A20  9009            0
Power Cord, India/S.     2867     A10, A20  9010            0
 Africa
Power Cord, Israel       2867     A10, A20  9011            0
Power Cord, Italy        2867     A10, A20  9012            0
Power Cord, N.           2867     A10, A20  9013            0
 America 250V
Power Cord, Brazil       2867     A10, A20  9014            0
Power Cord, Taiwan       2867     A10, A20  9015            0
Power Cord, Taiwan 250V  2867     A10, A20  9016            0

Installation

Field install rack       2867     A10, A20  9202          100
 mount kit

Global Finance transaction

IGF Transaction          2867     A10, A20  9556          NC
 Indicator

Port/loop counts

Number of FC Target      2867     A10, A20  9557          NC
 Ports
Number of FC Storage     2867     A10, A20  9558          NC
 Loops
Number of SATA Storage   2867     A10, A20  9559          NC
 Loops

NC = No charge

                            Machine/      Plant/
                            Model/        Field   MES     Cabl CSU
                            feature       install removal req. (1)
 
1-Port 10GbE TOE NIC        2867/A10/1008 Both    N       N    Y
4-Port Cu GbE TOE NIC       2867/A10/1009 Both    N       N    Y
2-Port iSCSI Target CU NIC  2867/A10/1010 Both    N       N    Y
2-Port iSCSI Target Fi NIC  2867/A10/1011 Both    N       N    Y
2-Port Fiber GbE NIC        2867/A10/1012 Both    N       N    Y
2-Port Cu GbE NIC           2867/A10/1013 Both    N       N    Y
4-Gbps FC HBA -- Disk,      2867/A10/1014 Both    N       N    Y
 2-port
4-Gbps FC HBA -- Tape,      2867/A10/1015 Both    N       N    Y
 2-port
SCSI LVD Tape Adapter       2867/A10/1016 Both    N       N    Y
2-Port 4-Gbps FC HBA-Target 2867/A10/1017 Both    N       N    Y
5m 50-micron MMF Cable      2867/A10/1045 Both    N       N    Y
30m 50-micron MMF Cable     2867/A10/1046 Both    N       N    Y
100-240 V ac Power Supply   2867/A10/1100 Plant   N       N    Y
Data ONTAP                  2867/A10/7800 Both    N(2)    N    Y
CIFS                        2867/A10/7801 Both    N(2)    N    Y
HTTP                        2867/A10/7802 Both    N(2)    N    Y
NFS                         2867/A10/7803 Both    N(2)    N    Y
FlexClone                   2867/A10/7805 Both    N(2)    N    Y
MultiStore                  2867/A10/7806 Both    N(2)    N    Y
SnapMirror                  2867/A10/7807 Both    N(2)    N    Y
SnapLock Compliance         2867/A10/7808 Both    N(2)    N    Y
SnapLock Enterprise         2867/A10/7809 Both    N(2)    N    Y
SnapRestore                 2867/A10/7811 Both    N(2)    N    Y
SnapVault Primary           2867/A10/7812 Both    N(2)    N    Y
SnapVault Secondary         2867/A10/7813 Both    N(2)    N    Y
LockVault Compliance        2867/A10/7814 Both    N(2)    N    Y
LockVault Enterprise        2867/A10/7815 Both    N(2)    N    Y
SyncMirror                  2867/A10/7816 Both    N(2)    N    Y
SnapValidator               2867/A10/7817 Both    N(2)    N    Y
Fibre Channel Protocol      2867/A10/7818 Both    N(2)    N    Y
Disk Sanitization           2867/A10/7819 Both    N(2)    N    Y
SnapManager/Exchange        2867/A10/7820 Both    N(2)    N    Y
 -- Filer
SnapManager/SQL             2867/A10/7821 Both    N(2)    N    Y
 -- Filer
near-line Function          2867/A10/7822 Both    N(2)    N    Y
SnapDrive -- AIX            2867/A10/8000 Both    N       N    Y
 1-2 Procs
SnapDrive -- AIX            2867/A10/8001 Both    N       N    Y
 3-4 Procs
SnapDrive -- AIX            2867/A10/8002 Both    N       N    Y
 5-8 Procs
SnapDrive -- AIX            2867/A10/8003 Both    N       N    Y
 9+ Procs
SnapDrive -- HPUX           2867/A10/8004 Both    N       N    Y
 1-2 Procs
SnapDrive -- HPUX           2867/A10/8005 Both    N       N    Y
 3-4 Procs
SnapDrive -- HPUX           2867/A10/8006 Both    N       N    Y
 5-8 Procs
SnapDrive -- HPUX           2867/A10/8007 Both    N       N    Y
 9+ Procs
SnapDrive -- Solaris        2867/A10/8008 Both    N       N    Y
 1-2 Proc
SnapDrive -- Solaris        2867/A10/8009 Both    N       N    Y
 3-4 Proc
SnapDrive -- Solaris        2867/A10/8010 Both    N       N    Y
 5-8 Proc
SnapDrive -- Solaris        2867/A10/8011 Both    N       N    Y
 9+ Procs
SnapDrive -- Linux          2867/A10/8020 Both    N       N    Y
 
 1-2 Procs
SnapDrive -- Linux          2867/A10/8021 Both    N       N    Y
 3-4 Procs
SnapDrive -- Linux          2867/A10/8022 Both    N       N    Y
 5-8 Procs
SnapDrive -- Linux          2867/A10/8023 Both    N       N    Y
 9+ Procs
SnapDrive for UNIX          2867/A10/8040 Both    N       N    Y
 Media Kit
SnapDrive for Windows       2867/A10/8050 Both    N       N    Y
SnapDrive for Win           2867/A10/8051 Both    N       N    Y
 Media Kit
FCP Host Attach Kit         2867/A10/8100 Both    N       N    Y
 -- Win
FCP Multipathing Dvr        2867/A10/8101 Both    N       N    Y
 -- Win
Base FCP Host Atch          2867/A10/8110 Both    N       N    Y
 Kit -- AIX
AIX Multipathing --         2867/A10/8111 Both    N       N    Y
 1-2 Procs
AIX Multipathing --         2867/A10/8112 Both    N       N    Y
 3-4 Procs
AIX Multipathing --         2867/A10/8113 Both    N       N    Y
 5-8 Procs
AIX Multipathing --         2867/A10/8114 Both    N       N    Y
 9+ Procs
AIX Media Kit for           2867/A10/8119 Both    N       N    Y
 Multipath
FCP Host Attach Kit         2867/A10/8120 Both    N       N    Y
 -- Linux
FCP Host Attach Kit         2867/A10/8121 Both    N       N    Y
 -- HPUX
FCP Host Atch Kit           2867/A10/8122 Both    N       N    Y
 -- Solaris
SnapManager/Exchange        2867/A10/8131 Both    N       N    Y
 -- Host
SnapManager/Exch --         2867/A10/8132 Both    N       N    Y
 Media Kit
SnapManager for SQL         2867/A10/8141 Both    N       N    Y
 -- Host
SnapManager/SQL --          2867/A10/8142 Both    N       N    Y
 Media Kit
Single Mbox Recovery        2867/A10/8150 Both    N       N    Y
 100 pk
Single Mbox Recovery        2867/A10/8151 Both    N       N    Y
 500 pk
Single Mbox Recovery        2867/A10/8152 Both    N       N    Y
 1000 pk
Single Mbox Recovery        2867/A10/8153 Both    N       N    Y
 2500 pk
Single Mbox Recovery        2867/A10/8154 Both    N       N    Y
 5K pk
Single Mbox Recovery        2867/A10/8155 Both    N       N    Y
 10K pk
Single Mbox Recovery        2867/A10/8156 Both    N       N    Y
 50K pk
Single Mbox Recovery        2867/A10/8157 Both    N       N    Y
 Med Kt
SMBR CA-ARCSERVE Extract    2867/A10/8158 Both    N       N    Y
 Wiz
SMBR Tivoli Tape Extract    2867/A10/8159 Both    N       N    Y
 Wiz
SMBR Legato Tape Extract    2867/A10/8160 Both    N       N    Y
 Wiz
SMBR NetBackup Extract      2867/A10/8161 Both    N       N    Y
 
 Wiz
SMBR PST Tape Extract Wiz   2867/A10/8162 Both    N       N    Y
SMBR HP Extract Wiz         2867/A10/8163 Both    N       N    Y
Data Fabric Manager Core    2867/A10/8250 Both    N       N    Y
DFM Bus. Continuance        2867/A10/8252 Both    N       N    Y
 Option
DFM Store Resource Mgmt     2867/A10/8253 Both    N       N    Y
 Opt
DFM Media Kit               2867/A10/8254 Both    N       N    Y
PDU Pwr Cord, 42U Rack      2867/A10/9000 Plant   N       N    Y
Power Cord, Cont. Europe    2867/A10/9001 Plant   N       N    Y
Power Cord, UK              2867/A10/9002 Plant   N       N    Y
Power Cord, Japan           2867/A10/9003 Plant   N       N    Y
Power Cord, North America   2867/A10/9004 Plant   N       N    Y
Power Cord, Australia/N.Z.  2867/A10/9005 Plant   N       N    Y
Power Cord, Switzerland     2867/A10/9006 Plant   N       N    Y
Power Cord, Argentina       2867/A10/9007 Plant   N       N    Y
Power Cord, China           2867/A10/9008 Plant   N       N    Y
Power Cord, Denmark         2867/A10/9009 Plant   N       N    Y
Power Cord, India/S. Africa 2867/A10/9010 Plant   N       N    Y
Power Cord, Israel          2867/A10/9011 Plant   N       N    Y
Power Cord, Italy           2867/A10/9012 Plant   N       N    Y
Power Cord, N.America 250V  2867/A10/9013 Plant   N       N    Y
Power Cord, Brazil          2867/A10/9014 Plant   N       N    Y
Power Cord, Taiwan          2867/A10/9015 Plant   N       N    Y
Power Cord, Taiwan 250V     2867/A10/9016 Plant   N       N    Y
Field install rack          2867/A10/9202 Plant   N       N    Y
 mount kit
IGF Transaction Indicator   2867/A10/9556 Field   N       N    Y
Number of FC Target Ports   2867/A10/9557 Plant   N       N    Y
Number of FC Storage Loops  2867/A10/9558 Plant   N       N    Y
Number of SATA Storage      2867/A10/9559 Plant   N       N    Y
 Loops
1-Port 10GbE TOE NIC        2867/A20/1008 Both    N       N    Y
4-Port Cu GbE TOE NIC       2867/A20/1009 Both    N       N    Y
2-Port iSCSI Target CU NIC  2867/A20/1010 Both    N       N    Y
2-Port iSCSI Target Fi NIC  2867/A20/1011 Both    N       N    Y
2-Port Fiber GbE NIC        2867/A20/1012 Both    N       N    Y
2-Port Cu GbE NIC           2867/A20/1013 Both    N       N    Y
4-Gbps FC HBA -- Disk,      2867/A20/1014 Both    N       N    Y
 2-port
4-Gbps FC HBA -- Tape,      2867/A20/1015 Both    N       N    Y
 2-port
SCSI LVD Tape Adapter       2867/A20/1016 Both    N       N    Y
2-Port 4-Gbps FC HBA-Target 2867/A20/1017 Both    N       N    Y
2m Copper Cluster 4X IB Cbl 2867/A20/1037 Both    N       N    Y
5m Copper Cluster 4X IB Cbl 2867/A20/1038 Both    N       N    Y
10m Copper Cluster 4X IB    2867/A20/1039 Both    N       N    Y
 Cbl
5m Fiber Cluster 4X IB Cbl  2867/A20/1040 Both    N       N    Y
30m Fiber Cluster 4X IB Cbl 2867/A20/1041 Both    N       N    Y
Copper-Fiber Converter      2867/A20/1042 Both    N       N    Y
5m 50-micron MMF Cable      2867/A20/1045 Both    N       N    Y
30m 50-micron MMF Cable     2867/A20/1046 Both    N       N    Y
100-240 V ac Power Supply   2867/A20/1100 Plant   N       N    Y
Data ONTAP                  2867/A20/7850 Both(3) N       N    Y
CIFS                        2867/A20/7851 Both    N       N    Y
HTTP                        2867/A20/7852 Both    N       N    Y
NFS                         2867/A20/7853 Both    N       N    Y
CFO                         2867/A20/7854 Both(3) N       N    Y
FlexClone                   2867/A20/7855 Both    N       N    Y
MultiStore                  2867/A20/7856 Both    N       N    Y
SnapMirror                  2867/A20/7857 Both    N       N    Y
SnapLock Compliance         2867/A20/7858 Both    N       N    Y
SnapLock Enterprise         2867/A20/7859 Both    N       N    Y
SnapMover                   2867/A20/7860 Both    N       N    Y
SnapRestore                 2867/A20/7861 Both    N       N    Y
SnapVault Primary           2867/A20/7862 Both    N       N    Y
SnapVault Secondary         2867/A20/7863 Both    N       N    Y
LockVault Compliance        2867/A20/7864 Both    N       N    Y
LockVault Enterprise        2867/A20/7865 Both    N       N    Y
SyncMirror                  2867/A20/7866 Both    N       N    Y
SnapValidator               2867/A20/7867 Both    N       N    Y
Fibre Channel Protocol      2867/A20/7868 Both    N       N    Y
Disk Sanitization           2867/A20/7869 Both    N       N    Y
SnapManager/Exchange        2867/A20/7870 Both    N       N    Y
 -- Filer
SnapManager/SQL -- Filer    2867/A20/7871 Both    N       N    Y
near-line Function          2867/A20/7872 Both    N       N    Y
MetroCluster                2867/A20/7873 Both    N       N    Y
SnapDrive -- AIX 1-2        2867/A20/8000 Both    N       N    Y
 Procs
SnapDrive -- AIX 3-4        2867/A20/8001 Both    N       N    Y
 Procs
SnapDrive -- AIX 5-8        2867/A20/8002 Both    N       N    Y
 Procs
SnapDrive -- AIX 9+         2867/A20/8003 Both    N       N    Y
 Procs
SnapDrive -- HPUX 1-2       2867/A20/8004 Both    N       N    Y
 Procs
SnapDrive -- HPUX 3-4       2867/A20/8005 Both    N       N    Y
 Procs
SnapDrive -- HPUX 5-8       2867/A20/8006 Both    N       N    Y
 Procs
SnapDrive -- HPUX 9+        2867/A20/8007 Both    N       N    Y
 Procs
SnapDrive -- Solaris        2867/A20/8008 Both    N       N    Y
 1-2 Proc
SnapDrive -- Solaris        2867/A20/8009 Both    N       N    Y
 3-4 Proc
SnapDrive -- Solaris        2867/A20/8010 Both    N       N    Y
 5-8 Proc
SnapDrive -- Solaris        2867/A20/8011 Both    N       N    Y
 9+ Procs
SnapDrive -- Linux          2867/A20/8020 Both    N       N    Y
 1-2 Procs
SnapDrive -- Linux          2867/A20/8021 Both    N       N    Y
 3-4 Procs
SnapDrive -- Linux          2867/A20/8022 Both    N       N    Y
 5-8 Procs
SnapDrive -- Linux          2867/A20/8023 Both    N       N    Y
 9+ Procs
SnapDrive for UNIX          2867/A20/8040 Both    N       N    Y
 Media Kit
SnapDrive for Windows       2867/A20/8050 Both    N       N    Y
SnapDrive for Win           2867/A20/8051 Both    N       N    Y
 Media Kit
FCP Host Attach Kit         2867/A20/8100 Both    N       N    Y
 -- Win
FCP Multipathing Dvr        2867/A20/8101 Both    N       N    Y
 -- Win
Base FCP Host Atch Kit      2867/A20/8110 Both    N       N    Y
 -- AIX
AIX Multipathing --         2867/A20/8111 Both    N       N    Y
 1-2 Procs
AIX Multipathing --         2867/A20/8112 Both    N       N    Y
 3-4 Procs
AIX Multipathing --         2867/A20/8113 Both    N       N    Y
 5-8 Procs
AIX Multipathing --         2867/A20/8114 Both    N       N    Y
 9+ Procs
AIX Media Kit for           2867/A20/8119 Both    N       N    Y
 Multipath
FCP Host Attach Kit         2867/A20/8120 Both    N       N    Y
 -- Linux
FCP Host Attach Kit         2867/A20/8121 Both    N       N    Y
 -- HPUX
FCP Host Atch Kit           2867/A20/8122 Both    N       N    Y
 -- Solaris
SnapManager/Exchange        2867/A20/8131 Both    N       N    Y
 -- Host
SnapManager/Exch --         2867/A20/8132 Both    N       N    Y
 Media Kit
SnapManager for SQL         2867/A20/8141 Both    N       N    Y
 -- Host
SnapManager/SQL --          2867/A20/8142 Both    N       N    Y
 Media Kit
Single Mbox Recovery        2867/A20/8150 Both    N       N    Y
 100 pk
Single Mbox Recovery        2867/A20/8151 Both    N       N    Y
 500 pk
Single Mbox Recovery        2867/A20/8152 Both    N       N    Y
 1000 pk
Single Mbox Recovery        2867/A20/8153 Both    N       N    Y
 2500 pk
Single Mbox Recovery        2867/A20/8154 Both    N       N    Y
 5K pk
Single Mbox Recovery        2867/A20/8155 Both    N       N    Y
 10K pk
Single Mbox Recovery        2867/A20/8156 Both    N       N    Y
50K pk
Single Mbox Recovery        2867/A20/8157 Both    N       N    Y
 Med Kt
SMBR CA-ARCSERVE            2867/A20/8158 Both    N       N    Y
 Extract Wiz
SMBR Tivoli Tape Extract    2867/A20/8159 Both    N       N    Y
 Wiz
SMBR Legato Tape Extract    2867/A20/8160 Both    N       N    Y
 Wiz
SMBR NetBackup Extract Wiz  2867/A20/8161 Both    N       N    Y
SMBR PST Tape Extract Wiz   2867/A20/8162 Both    N       N    Y
SMBR HP Extract Wiz         2867/A20/8163 Both    N       N    Y
Data Fabric Manager Core    2867/A20/8250 Both    N       N    Y
DFM Bus. Continuance Option 2867/A20/8252 Both    N       N    Y
DFM Store Resource Mgmt Opt 2867/A20/8253 Both    N       N    Y
DFM Media Kit               2867/A20/8254 Both    N       N    Y
PDU Pwr Cord, 42U Rack      2867/A20/9000 Plant   N       N    Y
Power Cord, Cont. Europe    2867/A20/9001 Plant   N       N    Y
Power Cord, UK              2867/A20/9002 Plant   N       N    Y
Power Cord, Japan           2867/A20/9003 Plant   N       N    Y
Power Cord, North America   2867/A20/9004 Plant   N       N    Y
Power Cord, Australia/N.Z.  2867/A20/9005 Plant   N       N    Y
Power Cord, Switzerland     2867/A20/9006 Plant   N       N    Y
Power Cord, Argentina       2867/A20/9007 Plant   N       N    Y
Power Cord, China           2867/A20/9008 Plant   N       N    Y
Power Cord, Denmark         2867/A20/9009 Plant   N       N    Y
Power Cord, India/S.Africa  2867/A20/9010 Plant   N       N    Y
Power Cord, Israel          2867/A20/9011 Plant   N       N    Y
Power Cord, Italy           2867/A20/9012 Plant   N       N    Y
Power Cord, N. America 250V 2867/A20/9013 Plant   N       N    Y
Power Cord, Brazil          2867/A20/9014 Plant   N       N    Y
Power Cord, Taiwan          2867/A20/9015 Plant   N       N    Y
Power Cord, Taiwan 250V     2867/A20/9016 Plant   N       N    Y
Field install rack mount    2867/A20/9202 Plant   N       N    Y
 kit
IGF Transaction Indicator   2867/A20/9556 Field   N       N    Y
Number of FC Target Ports   2867/A20/9557 Plant   N       N    Y
 
Number of FC Storage Loops  2867/A20/9558 Plant   N       N    Y
Number of SATA Storage      2867/A20/9559 Plant   N       N    Y
 Loops
N = No
Y = Yes
(1)

Customer setup.

(2)
The feature can be removed only through a feature conversion transaction.

(3)
The feature is field install only during a model conversion.

Alternative service charges

ICA warranty upgrade

                 IOR
Machine          IBM
type/model/      on-site repair
feature          (IOR, 24 x 7)
 
2867-A10         $10,660
2867-A20          17,030

ICA maintenance

                   IO8                 IOR
                   IBM next day        IBM 4-hr resp.
Machine            on-site repair      on-site repair
type/model         (IOR, 9 x 5)        (IOR, 24 x 7)
 
2867-A10           $1,031              $1,443
2867-A20            1,649               2,308
2867-A10-7800           0                   0
2867-A10-7801         419                 587
2867-A10-7802          98                 137
2867-A10-7803         476                 666
2867-A10-7805         182                 255
2867-A10-7806         232                 325
2867-A10-7807         515                 721
2867-A10-7808         242                 339
2867-A10-7809         242                 339
2867-A10-7811          80                 113
2867-A10-7812         134                 188
2867-A10-7813         515                 721
2867-A10-7814         757               1,060
2867-A10-7815         757               1,060
2867-A10-7816           0                   0
2867-A10-7817          36                  50
2867-A10-7818         252                 353
2867-A10-7819           0                   0
2867-A10-7820         180                 252
2867-A10-7821         180                 252
2867-A10-7822           0                   0
2867-A10-8000           8                  11
2867-A10-8001          15                  22
2867-A10-8002          26                  36
2867-A10-8003          41                  58
2867-A10-8004           8                  11
2867-A10-8005          15                  22
2867-A10-8006          26                  36
2867-A10-8007          41                  58
2867-A10-8008          11                   8
2867-A10-8009          15                  22
2867-A10-8010          26                  36
2867-A10-8011          41                  58
2867-A10-8020           8                  11
2867-A10-8021          15                  22
2867-A10-8022          26                  36
2867-A10-8023          41                  58
2867-A10-8040           0                   0
2867-A10-8050           3                   5
2867-A10-8051           0                   0
2867-A10-8100           4                   6
2867-A10-8101           4                   6
2867-A10-8110           6                   9
2867-A10-8111          21                  29
2867-A10-8112          26                  36
2867-A10-8113          31                  43
2867-A10-8114          52                  72
2867-A10-8119           0                   0
2867-A10-8120           4                   5
2867-A10-8121           0                   0
2867-A10-8122           0                   0
2867-A10-8131          39                  54
2867-A10-8132           0                   0
2867-A10-8141          39                  54
2867-A10-8142           0                   0
2867-A10-8150          10                  14
2867-A10-8151          22                  30
2867-A10-8152          34                  48
2867-A10-8153          70                  97
2867-A10-8154         113                 158
2867-A10-8155         193                 270
2867-A10-8156         943               1,320
2867-A10-8157           0                   0
2867-A10-8158           0                   0
2867-A10-8159           0                   0
2867-A10-8160           0                   0
2867-A10-8161           0                   0
2867-A10-8162           5                   7
2867-A10-8163           0                   0
2867-A10-8250           5                   8
2867-A10-8252          52                  72
2867-A10-8253          52                  72
2867-A10-8254           0                   0
2867-A20-7850           0                   0
2867-A20-7851         754               1,056
2867-A20-7852         176                 247
2867-A20-7853         857               1,200
2867-A20-7854         343                 480
2867-A20-7855         328                 459
2867-A20-7856         417                 584
2867-A20-7857         928               1,298
2867-A20-7858         437                 612
2867-A20-7859         437                 612
2867-A20-7860           0                   0
2867-A20-7861         144                 202
2867-A20-7862         242                 339
2867-A20-7863         928               1,298
2867-A20-7864       1,365               1,911
2867-A20-7865       1,365               1,911
2867-A20-7866           0                   0
2867-A20-7867          54                  76
2867-A20-7868         453                 635
2867-A20-7869           0                   0
2867-A20-7870         325                 454
2867-A20-7871         325                 454
2867-A20-7872           0                   0
2867-A20-7873         206                 289
2867-A20-8000           8                  11
2867-A20-8001          15                  22
2867-A20-8002          26                  36
2867-A20-8003          41                  58
2867-A20-8004           8                  11
2867-A20-8005          15                  22
2867-A20-8006          26                  36
2867-A20-8007          41                  58
2867-A20-8008          11                   8
2867-A20-8009          15                  22
2867-A20-8010          26                  36
2867-A20-8011          41                  58
2867-A20-8020           8                  11
2867-A20-8021          15                  22
2867-A20-8022          26                  36
2867-A20-8023          41                  58
2867-A20-8040           0                   0
2867-A20-8050           3                   5
2867-A20-8051           0                   0
2867-A20-8100           4                   6
2867-A20-8101           4                   6
2867-A20-8110           6                   9
2867-A20-8111          21                  29
2867-A20-8112          26                  36
2867-A20-8113          31                  43
2867-A20-8114          52                  72
2867-A20-8119           0                   0
2867-A20-8120           4                   5
2867-A20-8121           0                   0
2867-A20-8122           0                   0
2867-A20-8131          39                  54
2867-A20-8132           0                   0
2867-A20-8141          39                  54
2867-A20-8142           0                   0
2867-A20-8150          10                  14
2867-A20-8151          22                  30
2867-A20-8152          34                  48
2867-A20-8153          70                  97
2867-A20-8154         113                 158
2867-A20-8155         193                 270
2867-A20-8156         943               1,320
2867-A20-8157           0                   0
2867-A20-8158           0                   0
2867-A20-8159           0                   0
2867-A20-8160           0                   0
2867-A20-8161           0                   0
2867-A20-8162           5                   7
2867-A20-8163           0                   0
2867-A20-8250           5                   8
2867-A20-8252          52                  72
2867-A20-8253          52                  72
2867-A20-8254           0                   0

Annual minimum maintenance charges: For ServiceElect (ESA) Maintenance Service Charges, contact IBM Global Services at 888-IBM-4343 (426-4343).

Model conversion purchase prices

Machine type 2867
 
From    To      Returned   Model conversion
model   model   parts      purchase price
 
A10     A20     No         $178,200

Feature conversion purchase price

                                           Feature
                                           conversion
  Feature       Returned    Continuous     purchase
from    to      parts       maintenance    price
 
7800    7850    N           Y              $0
7801    7851    N           Y               0
7802    7852    N           Y               0
7803    7853    N           Y               0
7805    7855    N           Y               0
7806    7856    N           Y               0
7807    7857    N           Y               0
7808    7858    N           Y               0
7809    7859    N           Y               0
7811    7861    N           Y               0
7812    7862    N           Y               0
7813    7863    N           Y               0
7814    7864    N           Y               0
7815    7865    N           Y               0
7816    7866    N           Y               0
7817    7867    N           Y               0
7818    7868    N           Y               0
7819    7869    N           Y               0
7820    7870    N           Y               0
7821    7871    N           Y               0
7822    7872    N           Y               0
N = No
Y = Yes

IBM Global Financing

IBM Global Financing offers competitive financing to credit-qualified customers to assist them in acquiring IT solutions. Our offerings include financing for IT acquisition, including hardware, software, and services, both from IBM and other manufacturers or vendors. Offerings (for all customer segments: small, medium, and large enterprise), rates, terms, and availability can vary by country. Contact your local IBM Global Financing organization or visit the Web at

IBM Global Financing offerings are provided through IBM Credit LLC in the United States and other IBM subsidiaries and divisions worldwide to qualified commercial and government customers. Rates are based on a customer's credit rating, financing terms, offering type, equipment type, and options, and may vary by country. Other restrictions may apply. Rates and offerings are subject to change, extension, or withdrawal without notice.

Financing solutions from IBM Global Financing can help you stretch your budget and affordably acquire the new product. But beyond the initial acquisition, our end-to-end approach to IT management can also help keep your technologies current, reduce costs, minimize risk, and preserve your ability to make flexible equipment decisions throughout the entire technology life cycle. For more financing information, visit


 
Back topBack to top
 
Order now

To order, contact the Americas Call Centers, your local IBM representative, or your IBM Business Partner.

To identify your local IBM representative or IBM Business Partner, call 800-IBM-4YOU (426-4968).

 Phone:      800-IBM-CALL (426-2255)
 Fax:        800-2IBM-FAX (242-6329)
 Internet:   callserv@ca.ibm.com
 Mail:       IBM Americas Call Centers
             Dept. Teleweb Customer Support, 9th floor
             105 Moatfield Drive
             North York, Ontario
             Canada M3B 3R1
 
 Reference:  YE001

The Americas Call Centers, our national direct marketing organization, can add your name to the mailing list for catalogs of IBM products.

Note: Shipments will begin after the planned availability date.

Trademarks

 
System Storage, IBMLink, iSeries, OpenPower, and i5/OS are trademarks of International Business Machines Corporation in the United States or other countries or both.
 
AIX and Tivoli are registered trademarks of International Business Machines Corporation in the United States or other countries or both.
 
Windows and Microsoft are trademarks of Microsoft Corporation.
 
UNIX is a registered trademark of the Open Company in the United States and other countries.
 
Linux is a trademark of Linus Torvalds in the United States, other countries or both.
 
NetApp, MultiStore, SnapMirror, SnapMover, SnapRestore, SnapValidator, and SnapVault are registered trademarks and Data ONTAP, FlexClone, FlexVol, LockVault, SnapLock, FlexShare, and Snapshot are trademarks of Network Appliance, Inc. in the U.S. or other countries.
 
Other company, product, and service names may be trademarks or service marks of others.

Back to topBack to top
 

 
Printable version Printable version