IBM System Storage N7600 Models G10 and G20 offer enterprise-class Network Attached Storage gateways
IBM United States Hardware Announcement 106-641August 22, 2006
 ENUS106-641.PDF (130KB)
|
At a glance
 |
| At a glance |
 |
The IBM System Storage N7600 Model G10 and Model G20 are designed to provide:
- Enterprise-class performance
- 672 (Model G10), 840 (Model G20) LUN support
- Two AMD 2.6 GHz 64-bit Opteron processors (per node), each with 1 MB of level 2 cache
- 16 GB (per node) of DDR-333 memory
- The option to upgrade a Model G10 to a Model G20
The IBM System Storage N7600 Model G20 is also designed to provide enhanced reliability with active/active failover support.
For ordering, contact:
Your IBM representative, an IBM Business Partner, or IBM Americas Call Centers at
800-IBM-CALL
(Reference: YE001).
Back to top
|
|
| Overview |
|
The IBM System Storage™ N7600 gateway includes the Model G10, a single-node base unit, and the Model G20, an active/active dual-node base unit. Both models are designed to provide fast data access and simultaneous multiprotocol support with low maintenance requirements.
The two models of the N7600 gateway are designed to provide:
- A Network Attached Storage (NAS) gateway, Fibre Channel (FC), and Internet Small Computer System Interface (iSCSI) connectivity for enterprise customers
- 672 (Model G10) and 840 (Model G20) logical unit numbers (LUNs) support
- 16 GB (per node) of DDR-333 memory
- 512 MB (per node) of NVRAM
- Eight backend FC loops, per node, (four per node, native, plus four optional using FC HBA features)
- Upgrade capability from Model G10 to Model G20
The N7600 Model G20 is also designed to provide high availability with the CFO feature.
Additional functions, such as snapshot, mirroring, and business continuance capability, are
available through optional licensed functions.
Back to top
|
|
| Key prerequisites |
|
The IBM System Storage N7600 requires FC, NFS, CIFS, or iSCSI protocol function.
Back to top
|
|
| Planned availability dates |
|
- September 22, 2006: Except for model conversion (G10 to G20)
- December 29, 2006: Model conversion (G10 to G20)
Back to top
|
|
| Description |
|
The IBM System Storage N7600 gateways consist of the Model G10 or Model G20, and associated software. Both N7600 gateway models require an existing external storage infrastructure that can be heterogeneous. EXN expansion units may not be attached to the N7600 gateways.
The Model G10 is designed to provide a single-node gateway with iSCSI support, and NFS, CIFS, and FCP support via optional features. The N7600 is a 6U gateway that must be mounted in a standard 19-inch rack. The N7600 gateway does not include storage in the base chassis. The base chassis includes redundant, hot-plug power supplies, redundant cooling fans, six integrated 10/100/1000 Ethernet ports, and eight integrated 2-Gb FC ports that can be configured as targets or initiators. The Model G10 is designed to provide a single-node gateway with iSCSI support, and NFS, CIFS, and FCP support via optional features. The N7600 gateway does not include storage in the base chassis. The base chassis includes redundant, hot-plug power supplies, redundant cooling fans, six integrated 10/100/1000 Ethernet ports, and eight integrated 2-Gb FC ports that can be configured as targets or initiators. The N7600 Model G10 supports a maximum of 672 LUNs, 16 GB of DDR-333 memory, and eight FC ports (16 with the addition of expansion HBA features). The N7600 Model G10 is capable of being upgraded to an N7600 Model G20.
The Model G20 is designed to provide identical function as the N7600 Model G10, but with the addition of the Clustered Failover (CFO) function. The N7600 Model G20 consists of two active/active processing nodes that are designed to provide a high-availability environment, helping improve overall reliability. The N7600 Model G20 also supports a maximum of 840 LUNs, 32 GB of DDR-333 memory, and 16 FC ports (32 with the addition of expansion HBA features).
The N7600 gateways are designed to interoperate with products capable of data transmission in the industry-standard iSCSI, CIFS, FCP, and NFS protocols. These include, but are not limited to, the IBM System p™, IBM System i™ (NFS only), IBM System x™, and IBM System z™ (NFS only) servers, and a select number of FC-attached storage subsystems. Details and current information about N7600 gateway interoperability are available in the IBM System Storage N series Interoperability Matrix at
Section 508 of the U.S. Rehabilitation Act
The IBM System Storage N7600 is capable, as of September 22, 2006, when used in accordance with IBM's associated documentation, of satisfying the applicable requirements of Section 508 of the Rehabilitation Act, provided that any assistive technology used with the product properly interoperates with it. A U.S. Section 508 Voluntary Product Accessibility Template (VPAT) can be requested via IBM's Web site atBack to top
|
|
| Reference information |
|
- Hardware Announcement 106-634 , dated August 22, 2006, IBM System Storage N7800 offers enterprise-class Network Attached Storage gateways
- Hardware Announcement 106-635 , dated August 22, 2006, IBM System Storage N series function authorization for IBM System Storage N7600 and N7800 Models A10, A20, G10, and G20
Business Partner information
If you are a Direct Reseller - System Reseller acquiring products from IBM, you may link directly to Business Partner information for this announcement. A PartnerWorld ID and password are required (use IBM ID).
BP Attachment for Announcement Letter 106-641
Trademarks
Back to top
|
|
| Feature descriptions |
|
Adapter cards
For PCI-Express (PCIe) adapter cards, a maximum of five adapter cards may be ordered for Model G10, ten for Model G20. For PCI-X adapter cards, a maximum of three adapter cards may be ordered for Model G10, six for Model G20.
When adapter cards are ordered for Model G20 on the initial order, they must be ordered in pairs (an even number — an equal number for each node). For MES orders, this rule does not apply.
When upgrading from Model G10 to Model G20, the second node must have the same configuration as the first node. Adapter cards to match those in the first node must also be ordered.
1-Port 10GbE TOE NIC (#1008): This 10 Gb Ethernet PCI-X TCP/IP Offload Engine (TOE) adapter feature provides a single LC duplex connector. It supports a maximum distance of 300 meters using 850-nanometer (nm) multimode fiber (MMF) media. The N7600 Model G10 allows a maximum of two of this feature; Model G20 allows a maximum of four.
Cable features 5m 50-micron MMF Cable (#1045) or 30m 50-micron MMF Cable (#1046) may (optionally) be ordered with this feature.
4-Port Copper GbE NIC (#1009): This Gigabit Ethernet (1000Base-T) PCI-X TOE feature provides four RJ45 connectors. The maximum supported distance is 100 meters using Cat. 5, or better, unshielded twisted pair (UTP) four-pair media. The N7600 Model G10 allows a maximum of two of this feature; Model G20 allows a maximum of four.
2-Port iSCSI Target CU NIC (#1010): This Gigabit Ethernet iSCSI PCI-X TOE feature provides two RJ45 connectors. The N7600 Model G10 allows a maximum of three of this feature; Model G20 allows a maximum of six.
2-Port iSCSI Target Fi NIC (#1011): This Gigabit Ethernet iSCSI PCI-X TOE feature provides two optical LC duplex connectors. The N7600 Model G10 allows a maximum of three of this feature; Model G20 allows a maximum of six.
2-Port Fiber GbE NIC (#1012): This Gigabit Ethernet (1000Base-SX) PCIe feature provides two LC duplex connectors. The maximum supported distance is 275 meters using 62.5 micron MMF media and 550 meters using 50 micron MMF media. The N7600 Model G10 allows a maximum of five of this feature; Model G20 allows a maximum of ten.
2-Port Cu GbE NIC (#1013): This 10/100/1000 Ethernet PCIe feature provides two RJ45 connectors and supports 10Base-T, 100Base-TX, and 1000Base-T Ethernet standards. The maximum supported distance is 100 meters using Cat. 5 UTP four-pair media. The N7600 Model G10 allows a maximum of five of this feature; Model G20 allows a maximum of ten.
4-Gbps FC HBA — Disk, 2-port (#1014): This feature provides one PCIe dual-port 4-Gbps HBA for attaching disk expansion units (EXN1000 and EXN2000) to the N7600. This adapter auto-negotiates connections of 1-Gbps, 2-Gbps, or 4-Gbps. Two small form factor (SFF) multimode optical ports with LC connectors support the following cable lengths:
Link 50 micron 62.5 micron operating multimode multimode speed fiber fiber 1 Gbps 500 m 300 m 2 Gbps 300 m 150 m 4 Gbps 150 m 70 m
The ports of this adapter may not be used as FCP target ports.
The N7600 Model G10 allows a maximum of four of this feature; Model G20 allows a maximum of eight.
4-Gbps FC HBA — Tape, 2-port (#1015): This feature provides one PCIe dual-port 4-Gbps HBA for attaching tape devices. This adapter auto-negotiates connections of 1-Gbps, 2-Gbps, or 4-Gbps. Two small form factor (SFF) multimode optical ports with LC connectors support the following cable lengths:
Link 50 micron 62.5 micron operating multimode multimode speed fiber fiber 1 Gbps 500 m 300 m 2 Gbps 300 m 150 m 4 Gbps 150 m 70 m
The ports of this adapter may not be used as FCP target ports.
A 50-micron optical loopback cable with LC connectors is included with this feature.
The N7600 Model G10 allows a maximum of three of this feature; Model G20 allows a maximum of six.
SCSI LVD Tape Adapter (#1016): This feature provides one SCSI Ultr320 dual-channel LVD PCI-X adapter designed to support connection to a tape device. The adapter includes two 68-pin VHDCI external connectors (Channel A and Channel B). Two SCSI LVD two-meter cables (for connecting to the tape device) are included. These cables have 68-pin VHDCI connectors on each end. The N7600 Model G10 allows a maximum of three of this feature; Model G20 allows a maximum of six.
2-Port 4-Gbps FC HBA-Target (#1017): This feature provides one PCIe dual-port 4-Gbps HBA for FCP target ports. This adapter may only be used to provide additional target ports; it may not be used to attach storage expansion units. It auto-negotiates connections of 1-Gbps, 2-Gbps, or 4-Gbps. Two SFF multimode optical ports with LC connectors support the following cable lengths:
Link 50 micron 62.5 micron operating multimode multimode speed fiber fiber 1 Gbps 500 m 300 m 2 Gbps 300 m 150 m 4 Gbps 150 m 70 m
The N7600 Model G10 allows a maximum of four of this feature; Model G20 allows a maximum of eight.
Cluster cables
Cluster cables are required for 2866 Model G20 only. One of the cable features must be included in an order for the Model G20. These cables are used to connect the two nodes of the Model G20. If fiber cables are ordered, feature number 1042 must also be ordered.
Each cable feature provides the two cables required; a quantity of only one should be ordered. Feature #1042, if required, provides four converters; only one of this feature need be ordered.
The cabling features are:
- 2m Copper Cluster 4X IB Cbl (#1037)
- 5m Copper Cluster 4X IB Cbl (#1038)
- 10m Copper Cluster 4X IB Cbl (#1039)
- 5m Fiber Cluster 4X IB Cbl (#1040)
- 30m Fiber Cluster 4X IB Cbl (#1041)
- Copper-Fiber Converter (#1042)
Ethernet cables
5m 50-micron MMF Cable (#1045): This feature provides one 5-meter 50-micron multimode optical fiber cable for use with the 1-Port 10GbE NIC (feature #1008).
30m 50-micron MMF Cable (#1046): This feature provides one 30-meter 50-micron multimode optical fiber cable for use with the 1-Port 10GbE NIC (feature #1008).
Power supply
100-240 V ac Power Supply (#1100): This feature provides two power supplies requiring input of 100-240 V ac, 12-6A, 50/60 Hz, 1 phase power.
Licensed function features
Licensed functions are authorized at the 2866 system level. Only one feature is required per 2866 system, regardless of the physical capacity within the 2866 system or the number of attached expansion units.
The following additional licensed functions are available on the N7600 Models G10 and G20 as optional features.
Model G10 Model G20
feature feature Description
7701 7751 CIFS
7702 7752 HTTP
7703 7753 NFS
NA 7754 CFO
7705 7755 IBM System Storage(TM) N7600 with
FlexClone
7706 7756 IBM System Storage N7600 with
MultiStore
7707 7757 IBM System Storage N7600 with
SnapMirror
7709 7759 IBM System Storage N7600 with
SnapLock Enterprise
7710 7760 IBM System Storage N7600 with
SnapMover
7711 7761 IBM System Storage N7600 with
SnapRestore
7712 7762 IBM System Storage N7600 with
SnapVault Primary
7713 7763 IBM System Storage N7600 with
SnapVault Secondary
7715 7765 IBM System Storage N7600 with
LockVault Enterprise
7716 7766 IBM System Storage N7600 with
SyncMirror
7717 7767 IBM System Storage N7600 with
SnapValidator
7718 7768 Fibre Channel Protocol
7719 7769 Disk Sanitization
7720 7770 SnapManager/Exchange -- Filer
7721 7771 SnapManager/SQL -- Filer
8000 8000 SnapDrive -- AIX(R) 1-2 Procs
8001 8001 SnapDrive -- AIX 3-4 Procs
8002 8002 SnapDrive -- AIX 5-8 Procs
8003 8003 SnapDrive -- AIX 9+ Procs
8004 8004 SnapDrive -- HPUX 1-2 Procs
8005 8005 SnapDrive -- HPUX 3-4 Procs
8006 8006 SnapDrive -- HPUX 5-8 Procs
8007 8007 SnapDrive -- HPUX 9+ Procs
8008 8008 SnapDrive -- Solaris 1-2 Proc
8009 8009 SnapDrive -- Solaris 3-4 Proc
8010 8010 SnapDrive -- Solaris 5-8 Proc
8011 8011 SnapDrive -- Solaris 9+ Procs
8020 8020 SnapDrive -- Linux(TM) 1-2 Procs
8021 8021 SnapDrive -- Linux 3-4 Procs
8022 8022 SnapDrive -- Linux 5-8 Procs
8023 8023 SnapDrive -- Linux 9+ Procs
8040 8040 SnapDrive for UNIX(R) Media Kit
8050 8050 SnapDrive for Windows(TM)
8051 8051 SnapDrive for Win Media Kit
8100 8100 FCP Host Attach Kit -- Win
8101 8101 FCP Multipathing Dvr -- Win
8110 8110 Base FCP Host Atch Kit -- AIX
8111 8111 AIX Multipathing -- 1-2 Procs
8112 8112 AIX Multipathing -- 3-4 Procs
8113 8113 AIX Multipathing -- 5-8 Procs
8114 8114 AIX Multipathing -- 9+ Procs
8119 8119 AIX Media Kit for Multipath
8120 8120 FCP Host Attach Kit -- Linux
8121 8121 FCP Host Attach Kit -- HPUX
8122 8122 FCP Host Atch Kit -- Solaris
8131 8131 SnapManager/Exchange -- Host
8132 8132 SnapManager/Exch -- Media Kit
8141 8141 SnapManager for SQL -- Host
8142 8142 SnapManager/SQL -- Media Kit
8150 8150 Single Mbox Recovery 100 pk
8151 8151 Single Mbox Recovery 500 pk
8152 8152 Single Mbox Recovery 1000 pk
8153 8153 Single Mbox Recovery 2500 pk
8154 8154 Single Mbox Recovery 5K pk
8155 8155 Single Mbox Recovery 10K pk
8156 8156 Single Mbox Recovery 50K pk
8157 8157 Single Mbox Recovery Med Kt
8158 8158 SMBR CA-ARCSERVE Extract Wiz
8159 8159 SMBR Tivoli(R) Tape Extract Wiz
8160 8160 SMBR Legato Tape Extract Wiz
8161 8161 SMBR NetBackup Extract Wiz
8162 8162 SMBR PST Tape Extract Wiz
8163 8163 SMBR HP Extract Wiz
8250 8250 Data Fabric Manager Core
8252 8252 DFM Bus. Continuance Option
8253 8253 DFM Store Resource Mgmt Opt
8254 8254 DFM Media Kit
Licensed function indicators
Data ONTAP (#7700 and #7750): This feature enables the Data ONTAP licensed function. Data ONTAP is an optimized, scalable, and flexible operating system for the IBM N series storage controllers that is designed for heterogeneous environments. Data ONTAP is designed to deliver flexible management and high availability, support business continuance, and support data retention, thereby helping reduce storage management complexity in your enterprise. Data ONTAP includes iSCSI, FlexShare, FlexCache, FlexVol, and Snapshot support.
The corequisite 2870 feature number must be specified to establish authorization for use of the Data ONTAP licensed function.
CIFS (#7701 and #7751): This feature enables the CIFS licensed function, which is designed to provide connectivity to clients who transfer data via the CIFS protocol. This feature is also used for maintenance billing purposes.
The corequisite 2870 feature number must be purchased to establish authorization for use of the CIFS licensed function before the feature activation code is provided by IBM.
HTTP (#7702 and #7752): This feature enables the HTTP licensed function, which is designed to provide data transfer to and from the N7600 gateways via the HTTP protocol. This feature is also used for maintenance billing purposes.
The corequisite 2870 feature number must be purchased to establish authorization for use of the HTTP licensed function before the feature activation code is provided by IBM.
NFS (#7703 and #7753): This feature enables the NFS licensed function subject to the client applying a feature activation code made available by IBM. The NFS licensed function is designed to provide connectivity to clients that transfer data via the NFS protocol. This feature is also used for maintenance billing purposes.
The corequisite 2870 feature number must be purchased to establish authorization for use of the NFS licensed function before the feature activation code is provided by IBM.
CFO (#7754 — G20 only): Installed on a pair of N series gateways, this feature is designed to enable the transfer of data service from an unavailable controller to the other controller in the cluster. It is designed to deliver a robust and highly available data service for business-critical environments. This feature applies to the N7600 Model G20 only.
FlexClone (#7705 and #7755): This feature enables the FlexClone licensed function provided the customer has applied a feature activation code that is made available by IBM. FlexClone is designed to enable true cloning — near-instant replication of data volumes and data sets — without requiring additional storage space at the time of creation. This feature is also used for maintenance billing purposes.
The corequisite 2870 feature number must be purchased to establish authorization for use of the FlexClone licensed function before the feature activation code is provided by IBM.
MultiStore (#7706 and #7756): This feature enables the MultiStore licensed function provided the customer has applied a feature activation code that is made available by IBM. MultiStore is designed to enable multiprotocol storage consolidation across enterprises. It is designed to provide partitioning of network and storage resources, and enable multidomain and multiserver consolidation on a single storage appliance. In addition, it is designed to help reduce data management cost by introducing a tiered management model enabling cost-effective administration. This feature is also used for maintenance billing purposes.
The corequisite 2870 feature number must be purchased to establish authorization for use of the MultiStore licensed function before the feature activation code is provided by IBM.
Note: The combination of Fibre Channel Protocol (#7718) and MultiStore (#7706) is supported only on virtual filer 0. They are otherwise mutually exclusive.
SnapMirror (#7707 and #7757): This feature enables the SnapMirror licensed function provided the customer has applied a feature activation code that is made available by IBM. SnapMirror is designed to replicate data between one or more N series gateways. It is designed to continually update the mirrored data to help keep it current and available for disaster recovery, offloading tape backup, read-only data distribution, testing on nonproduction systems, and online data migration. This feature is also used for maintenance billing purposes.
The corequisite 2870 feature number must be purchased to establish authorization for use of the SnapMirror licensed function before the feature activation code is provided by IBM.
SnapLock Enterprise (#7709 and #7759): This feature enables the SnapLock Enterprise licensed function provided the customer has applied a feature activation code that is made available by IBM. SnapLock Enterprise is designed to provide high performance and high-security data permanence to disk-based primary and secondary N7600 storage subsystems. An integrated element of the proven IBM Data ONTAP operating system, SnapLock software is designed to support the accuracy, integrity, and security of data by helping prevent the alteration of business records and allow rapid online access for long periods of time. SnapLock Enterprise allows administrators to delete entire SnapLock Enterprise volumes. However, it is designed to prevent any SnapLock Enterprise user or administrator from deleting or modifying individual SnapLock Enterprise WORM records. This feature is also used for maintenance billing purposes.
The corequisite 2870 feature number must be purchased to establish authorization for use of the SnapLock Enterprise licensed function before the feature activation code is provided by IBM.
SnapMover (#7710 and #7760): This feature enables the SnapMover licensed function provided the customer has applied a feature activation code that is made available by IBM. SnapMover is designed to provide a no-copy data migration solution for workload distribution among N series gateways sharing common backend storage while avoiding impact to data availability and disruption to users. This helps organizations to efficiently address evolving storage and performance requirements while maintaining user productivity. This feature is also used for maintenance billing purposes.
The corequisite 2870 feature number must be purchased to establish authorization for use of the SnapMover licensed function before the feature activation code is provided by IBM.
SnapRestore (#7711 and #7761): This feature enables the SnapRestore licensed function provided the customer has applied a feature activation code that is made available by IBM. SnapRestore is designed to help an enterprise to recover from data loss that may occur due to user error, viruses, or many other disasters. SnapRestore is designed to help users recover data, from individual files to multi-terabyte volumes, using snapshot copies to help allow quick resumption of operations. This feature is also used for maintenance billing purposes.
The corequisite 2870 feature number must be purchased to establish authorization for use of the SnapRestore licensed function before the feature activation code is provided by IBM.
SnapVault features
SnapVault provides a centralized disk-based backup solution for heterogeneous storage environments. Storing backup data in multiple snapshot copies on the SnapVault secondary storage system from multiple SnapVault primary systems helps let enterprises keep weeks of backups online for fast restoration. Backing up multiple SnapVault primary storage systems to a single SnapShot copy on a large SnapVault secondary storage system can help allow enterprises to centralize their backup and restore operations in a single location. SnapVault primary storage systems can be local or remote N7600 gateways, Windows servers, or UNIX servers connected via a LAN or a WAN. The SnapVault secondary storage system can also be located at a remote disaster recovery site to help protect against production site failures.
SnapVault Primary (#7712 and #7762): This feature enables the SnapVault Primary licensed function provided the customer has applied a feature activation code that is made available by IBM. This feature is also used for maintenance billing purposes.
The corequisite 2870 feature number must be purchased to establish authorization for use of the SnapVault Primary licensed function before the feature activation code is provided by IBM.
SnapVault Secondary (#7713 and #7763): This feature enables the SnapVault Secondary licensed function provided the customer has applied a feature activation code that is made available by IBM. This feature is also used for maintenance billing purposes.
The corequisite 2870 feature number must be purchased to establish authorization for use of the SnapVault Secondary licensed function before the feature activation code is provided by IBM.
LockVault Enterprise (#7715 and #7765): This feature enables the LockVault licensed function provided the customer has applied a feature activation code that is made available by IBM. LockVault Enterprise is designed to support backup and disaster recovery, helping deliver comprehensive, integrated data protection for unstructured data. LockVault integrates SnapLock Enterprise and SnapVault technologies to create a solution specifically designed to help address compliance issues for unstructured data. LockVault is designed to allow customers to make WORM backups of their unstructured data, by simply copying and storing only the unique blocks that have been written since the most recent incremental backup. This feature is also used for maintenance billing purposes.
The corequisite 2870 feature number must be purchased to establish authorization for use of the LockVault licensed function before the feature activation code is provided by IBM.
SyncMirror (#7716 and #7766): This feature is designed to provide the capability to create and maintain a mirror copy of data on another N7600 gateway. SyncMirror is designed to provide local synchronous data replication capability. By maintaining two copies of data online, SyncMirror is designed to help protect your data against hardware outages, including triple disk failure. When used with the IBM N7600 Clustered Failover high-availability solution, SyncMirror is designed to help you to achieve a high level of data availability. Both N7600 gateways must have the same configuration.
This feature enables the SyncMirror licensed function provided the customer has applied a feature activation code that is made available by IBM. This feature is also used for maintenance billing purposes.
The corequisite 2870 feature number must be purchased to establish authorization for use of the SyncMirror licensed function before the feature activation code is provided by IBM.
SnapValidator (#7717 and #7767): This feature enables the SnapValidator licensed function provided the customer has applied a feature activation code that is made available by IBM. SnapValidator is tightly integrated with the Oracle Database architecture and complies with the Oracle HARD initiative. It is designed to detect and prevent potential corruptions of Oracle data before they happen. By adding intelligence and database awareness to modular storage systems (across SAN, iSAN, and NAS protocols), IBM N7600 SnapValidator helps to enable advanced database protection functionality to a broader array of organizations. This feature is also used for maintenance billing purposes.
The corequisite 2870 feature number must be purchased to establish authorization for use of the SnapValidator licensed function before the feature activation code is provided by IBM.
Fibre Channel Protocol (#7718 and #7768): This feature enables the Fibre Channel Protocol licensed function which is designed to provide connectivity to clients that transfer data via the FCP protocol provided the customer has applied a feature activation code that is made available by IBM. This feature is also used for maintenance billing purposes.
The corequisite 2870 feature number must be purchased to establish authorization for use of the Fibre Channel Protocol licensed function before the feature activation code is provided by IBM.
Note: The combination of Fibre Channel Protocol (#7717 and #7769) and MultiStore (#7705 and #7756) is supported only on virtual filer 0. They are otherwise mutually exclusive.
SnapManager/Exchange — Filer (#7720 and #7770): This feature enables the SnapManager/Exchange — Filer licensed function provided the customer has applied a feature activation code that is made available by IBM. IBM SnapManager for Microsoft™ Exchange is a comprehensive data management solution designed to streamline storage management while simplifying configuration, backup, and restore operations for Exchange databases. Deployed in combination with N7600 storage systems, SnapManager software is designed to provide near-instantaneous hot backups and rapid restores to help you achieve a combination of availability, scalability, performance, and reliability for Exchange environments.
This feature allows connectivity of any number of exchange servers to one N7600 gateway.
This feature is also used for maintenance billing purposes.
This feature allows connection of any number of exchange servers to a gateway.
The corequisite 2870 feature number must be purchased to establish authorization for use of the Fibre Channel Protocol licensed function before the feature activation code is provided by IBM.
SnapManager/SQL — Filer (#7721 and #7771): This feature enables the SnapManager/SQL — Filer licensed function provided the customer has applied a feature activation code that is made available by IBM. IBM SnapManager for Microsoft SQL is a comprehensive data management solution designed to streamline storage management while simplifying configuration, backup, and restore operations for Exchange databases. Deployed in combination with N7600 storage systems, SnapManager software is designed to provide near-instantaneous hot backups and rapid restores to help you achieve a combination of availability, scalability, performance, and reliability for SQL environments.
This feature allows connectivity of any number of SQL servers to one N7600 gateway.
This feature is also used for maintenance billing purposes.
This feature allows connection of any number of SQL servers to a gateway.
The corequisite 2870 feature number must be purchased to establish authorization for use of the Fibre Channel Protocol licensed function before the feature activation code is provided by IBM.
Host software
SnapDrive for AIX
These features provide a software application designed to enhance the storage management capabilities in an AIX environment, including easier dynamic volume management, cluster management, snapshot management, and replication management. One feature must be ordered for each host on which the feature will be installed.
Note: Use of these features with FCP attachment requires the FCP Protocol feature, #7718 or #7768, on the N7600, as well as corequisite features #8110 and #8119.
Note: If running with iSCSI, the iSCSI Host Support Kit is required. The iSCSI Host Support Kit is available for download from
SnapDrive — AIX 1-2 Procs (#8000): This feature provides SnapDrive for AIX support for a single host with 1 or 2 processors.
SnapDrive — AIX 3-4 Procs (#8001): This feature provides SnapDrive for AIX support for a single host with 3 or 4 processors.
SnapDrive — AIX 5-8 Procs (#8002): This feature provides SnapDrive for AIX support for a single host with 5, 6, 7, or 8 processors.
SnapDrive — AIX 9+ Procs (#8003): This feature provides SnapDrive for AIX support for a single host with 9 or more processors.
SnapDrive for HP-UX
These features provide a software application designed to enhance the storage management capabilities in an HP-UX environment, including easier dynamic volume management, cluster management, snapshot management, and replication management. One feature must be ordered for each host on which the feature will be installed.
Note: Use of these features with FCP attachment requires the FCP Protocol feature, #7718 or #7768, on the N7600, as well as corequisite #8121.
Note: If running with iSCSI, the iSCSI Host Support Kit is required. The iSCSI Host Support Kit is available for download from
SnapDrive — HPUX 1-2 Procs (#8004): This feature provides SnapDrive for HPUX support for a single host with 1 or 2 processors.
SnapDrive — HPUX 3-4 Procs (#8005): This feature provides SnapDrive for HPUX support for a single host with 3 or 4 processors.
SnapDrive — HPUX 5-8 Procs (#8006): This feature provides SnapDrive for HPUX support for a single host with 5 to 8 processors.
SnapDrive — HPUX 9+ Procs (#8007): This feature provides SnapDrive for HPUX support for a single host with 9 or more processors.
SnapDrive for Solaris
These features provide a software application designed to enhance the storage management capabilities in a Solaris environment, including easier dynamic volume management, cluster management, snapshot management, and replication management. One feature must be ordered for each host on which the feature will be installed.
Note: Use of these features with FCP attachment requires the FCP Protocol feature, #7718 or #7768, on the N7600, as well as corequisite #8122.
Note: If running with iSCSI, the iSCSI Host Support Kit is required. The iSCSI Host Support Kit is available for download from
SnapDrive — Solaris 1-2 Proc (#8008): This feature provides SnapDrive for Solaris support for a single host with 1 or 2 processors.
SnapDrive — Solaris 3-4 Proc (#8009): This feature provides SnapDrive for Solaris support for a single host with 3 or 4 processors.
SnapDrive — Solaris 5-8 Proc (#8010): This feature provides SnapDrive for Solaris support for a single host with 5 to 8 processors.
SnapDrive — Solaris 9+ Procs (#8011): This feature provides SnapDrive for Solaris support for a single host with 9 or more processors.
SnapDrive for Linux
These features provide a software application designed to enhance the storage management capabilities in a Linux environment, including easier dynamic volume management, cluster management, snapshot management, and replication management. One feature must be ordered for each host on which the feature will be installed.
These features are supported only for iSCSI; they are not supported for Fibre Channel Protocol. iSCSI Host Support Kits must be installed on the N7600. The iSCSI Host Support Kit is available for download from
SnapDrive — Linux 1-2 Procs (#8020): This feature provides SnapDrive for Linux support for a single host with 1 or 2 processors.
SnapDrive — Linux 3-4 Procs (#8021): This feature provides SnapDrive for Linux support for a single host with 3 or 4 processors.
SnapDrive — Linux 5-8 Procs (#8022): This feature provides SnapDrive for Linux support for a single host with 5 to 8 processors.
SnapDrive — Linux 9+ Procs (#8023): This feature provides SnapDrive for Linux support for a single host with 9 or more processors.
SnapDrive for UNIX Media Kit (#8040): This feature provides a physical media kit that includes SnapDrive for Linux, Solaris, AIX, and HP-UX.
SnapDrive for Windows (#8050): This feature provides SnapDrive for Windows function. One feature must be ordered for each host on which it will be installed. It provides a software application that is designed to enhance the storage management capability in a Windows environment, including easier management of dynamic volume management, cluster management, snapshot management, and replication management.
Note: If running with FCP, features 8100 and 8101 are corequisites. If running with iSCSI, the iSCSI Host Support Kit is required. The iSCSI Host Support Kit is available for download from
SnapDrive for Windows Media Kit (#8051): This feature provides a physical media kit that includes SnapDrive for Windows. This feature is required when ordering #8050.
FCP Host Attach Kit — Windows (#8100): This feature provides a Host Attach Kit for Windows that includes drivers, support scripts, installation scripts, and documentation. One kit must be ordered for each host that is to be attached via FCP.
FCP Multipathing Dvr — Win (#8101): This feature provides a multipathing driver for the Windows FCP Host Attach Kit for use if SnapDrive for Windows is not already installed or ordered.
Base FCP Host Atch Kit — AIX (#8110): This feature provides the base Host Attach Kit for AIX that includes drivers, support scripts, installation scripts, and documentation. If multipathing support is desired, the AIX Multipathing Support feature that, corresponds to the appropriate number of processors on the host, should be ordered.
AIX Multipathing — 1-2 Procs (#8111): This feature enables AIX multipathing support for a single host with one or two processors. You must also order the Base FCP Host Attach Kit for AIX if this feature is ordered.
AIX Multipathing — 3-4 Procs (#8112): This feature enables AIX multipathing support for a single host with three or four processors. You must also order the Base FCP Host Attach Kit for AIX if this feature is ordered.
AIX Multipathing — 5-8 Procs (#8113): This feature enables AIX multipathing support for a single host with five to eight processors. You must also order the Base FCP Host Attach Kit for AIX if this feature is ordered.
AIX Multipathing — 9+ Procs (#8114): This feature enables AIX multipathing support for a single host with nine or more processors. You must also order the Base FCP Host Attach Kit for AIX if this feature is ordered.
AIX Media Kit for Multipath (#8119): This feature provides a physical media kit that includes DotHill Multipathing Drivers for AIX. It should be ordered when you cannot download the media kit from the NAS support site, or simply require the software on physical media.
FCP Host Attach Kit — Linux (#8120): This feature provides a Host Attach Kit for Linux that various drivers, support scripts, installation scripts, and documentation.
FCP Host Atch Kit — HPUX (#8121): This feature provides a software application designed to enhance the storage management capabilities in an HP-UX environment, including easier dynamic volume management, cluster management, snapshot management, and replication management. One feature must be ordered for each host on which the feature will be installed.
FCP Host Atch Kit — Solaris (#8122): This feature provides a software application designed to enhance the storage management capabilities in a Solaris environment, including easier dynamic volume management, cluster management, snapshot management, and replication management. One feature must be ordered for each host on which the feature will be installed.
SnapManager/Exchange — Host (#8131): This feature allows connection of one exchange host server to a gateway. One of this feature is required for each exchange host. The Fibre Channel Protocol feature or iSCSI must be installed on the attached gateway.
SnapManager/Exch — Media Kit (#8132): This feature provides the physical media kit for SnapManager for Exchange. Only one media kit is needed for a single SnapManager for Exchange — Filer or Host license. You may order more than one, but a single media kit may be installed on multiple hosts or storage controllers.
SnapManager for SQL — Host (#8141): This feature allows connection of one SQL host server to a gateway. One of this feature is required for each SQL host. The Fibre Channel Protocol feature or iSCSI must be installed on the attached gateway.
SnapManager/SQL — Media Kit (#8142): This feature provides the physical media kit for SnapManager for SQL. Only one media kit is needed for a single SnapManager for SQL — Filer or Host license. You may order more than one, but a single kit may be installed on multiple hosts or gateways.
Single Mailbox Recovery
Single Mail Box Recovery for Microsoft Exchange (SMBR) software is designed to provide rapid recovery of single mail boxes, individual folders, or single messages from a valid SnapManager backup to the production Exchange server, to any offline Exchange server, or to an Outlook .pst file. The software can help save time and money by avoiding the need for cumbersome and disk-intensive brick-level backups or investments in a dedicated recovery server infrastructure.
Single Mbox Recovery 100 pk (#8150): This feature provides support for 100 mailboxes.
Single Mbox Recovery 500 pk (#8151): This feature provides support for 500 mailboxes.
Single Mbox Recovery 1000 pk (#8152): This feature provides support for 1,000 mailboxes.
Single Mbox Recovery 2500 pk (#8153): This feature provides support for 2,500 mailboxes.
Single Mbox Recovery 5K pk (#8154): This feature provides support for 5,000 mailboxes.
Single Mbox Recovery 10K pk (#8155): This feature provides support for 10,000 mailboxes.
Single Mbox Recovery 50K pk (#8156): This feature provides support for 50,000 mailboxes.
Single Mbox Recovery Med Kt (#8157): This feature provides the physical media kit for Single Mailbox Recovery. Only one media kit is needed for a single Single Mailbox Recovery license. You may order more than one, but a single media kit may be installed on multiple Exchange Hosts.
SMBR CA-ARCSERVE Extract Wiz (#8158): The CA-ARCSERVE Extract Wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server.
SMBR Tivoli Tape Extract Wiz (#8159): The Tivoli Extract Wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server.
SMBR Legato Tape Extract Wiz (#8160): The Legato Extract Wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server.
SMBR NetBackup Extract Wiz (#8161): The NetBackup Extract Wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server.
SMBR PST Tape Extract Wiz (#8162): The PST Extract Wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server.
SMBR HP Extract Wiz (#8163): The HP Extract Wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server.
Data Fabric Manager Core (#8250): This feature is designed to provide a central point of control and to provide alerts, reports, and configuration tools. These tools are designed to help manage storage and content delivery infrastructure, consistent with business requirements, and help maximize availability and reduce total cost of ownership.
Data Fabric Manager (DFM) Core provides the license allowing the use of this feature on the gateway for which it is ordered in support of some predefined number of nodes. On the initial order, the number of this feature ordered defines the number of nodes for which the feature is authorized. That number may be incremented via a subsequent (MES) order by ordering the incremental number of feature #8250. That is, if the number of nodes to be supported is to be incremented by ten, the number of feature #8250 that must be ordered in the MES order is ten.
For the initial order of this feature, a key is provided allowing DFM support of the number of nodes specified. When the number of nodes is incremented by a subsequent order, a new key is assigned allowing use of DFM for the new total number of nodes. The old key is rendered obsolete.
This feature requires the DFM Media Kit (#8254).
DFM Bus. Continuance Option (#8252): This feature provides advanced function for Data Fabric Manager. It is designed to help you minimize downtime by notifying you that customized preset thresholds and conditions have exceeded operational limits.
This feature requires the Data Fabric Manager Core feature (#8250).
DFM Store Resource Mgmt Opt (#8253): This feature provides advanced function of Data Fabric Manager. It is designed to provide detailed storage utilization reports to aid capacity planning, consumption management, data migration, and chargeback.
This feature requires the Data Fabric Manager Core feature (#8250).
DFM media kit (#8254): This feature provides the media kit required by DFM. One media kit supports multiple hosts.
Power (line) cord features
These features provide two line cords for Model G10, four for Model G20, to supply external power to the N7600. One power cord feature must be specified, either the PDU power cord for IEC 320, sheet C13 outlets, or one based on the country or region in which the system will be installed.
Feature Description 9000 PDU Pwr Cord, 42U Rack 9001 Power Cord, Cont. Europe 9002 Power Cord, UK 9003 Power Cord, Japan 9004 Power Cord, North America 9005 Power Cord, Australia/N.Z. 9006 Power Cord, Switzerland 9007 Power Cord, Argentina 9008 Power Cord, China 9009 Power Cord, Denmark 9010 Power Cord, India/S. Africa 9011 Power Cord, Israel 9012 Power Cord, Italy 9013 Power Cord, N. America 250V 9014 Power Cord, Brazil 9015 Power Cord, Taiwan 9016 Power Cord, Taiwan 250V
Miscellaneous hardware features
Field install rack mount kit (#9202): This feature specifies that the N5200 is to be installed in the field in a customer-provided rack. Rack mounting hardware is included.
IGF Transaction Indicator (#9556): This specify feature is used to designate that a new N5200 Model G10 or Model G20 is involved in an IBM Global Financing transaction (lease or financing). It is for administrative purposes only.
For a new N5200 order that includes #7xxx licensed function features (excluding feature #7000 or #7100), the IGF Transaction Indicator feature must be ordered as a Record Purposes Only (RPO) MES to the N5200. This feature is field-install only and cannot be included on the N5200 initial order.
This feature should not be used for any other #7xxx licensed function transactions. It is not required when adding additional #7xxx licensed functions to an installed N5200.
Configuration specify feature
Number of FC Target Ports (#9557): This no-charge feature specifies the number of onboard FC ports that are to be configured as FCP target ports. Target ports added via feature number 1017 must not be included in this number. FCP target ports are used for FC attachment of the N7600 to application servers (containing FC HBAs) or to FC storage area networks.
This feature is only relevant if you intend to use the Fibre Channel Protocol feature on the N7600.
For an N7600 Model G10, valid choices are 0, 2, 4, and 8. For a Model G20, valid choices
are 0, 4, 8, and 16.
Back to top
|
|
| Publications |
|
The following publications are shipped with the product. Additional copies will be available immediately.
Order
Title number
Shipped in hardcopy:
IBM System Storage N7600 and GC26-7956 N7800 Gateway Installation and Setup Instructions IBM System Storage N Series GC26-7986 Statement of Limited Warranty (in 9 Languages) IBM Translated Safety Notices GA27-4338
Shipped on CD-ROM:
IBM System Storage N Series GC26-7987 Statement of Limited Warranty (in 29 Languages) IBM System Storage N7600 and GC26-7953 N7800 Hardware and Service Guide IBM System Storage EXN1000 GC26-7802 Storage Expansion Unit Hardware and Service Guide IBM System Storage EXN2000 GA32-0516 Storage Expansion Unit Hardware and Service Guide
On the Web, all above, and:
IBM System Storage N series GC26-7787 Error Messages and Troubleshooting Guide IBM System Storage N series GC26-7791 Software Upgrade Guide IBM System Storage N series GA32-0543 Introduction and Planning Guide IBM System Storage N series GC26-7789 Diagnostics Guide IBM System Storage N series GA32-0521 Storage Management Guide IBM System Storage N series GC26-7962 Data ONTAP 7.2 Gateway Software Setup, Installation, and Management Guide
All publications are available to be ordered. To order, contact your IBM representative.
The Publication Notification System (PNS) is available by order number/product number. Customers currently subscribing to PNS will automatically receive notifications by e-mail. Customers who want to subscribe can visit the PNS Web site location at
The publications listed on the notification can be ordered by calling the Pubs Support Group in Raleigh at 800-879-2755, option 1.
The IBM Publications Center Portal
The Publications Center is a worldwide central repository for IBM product publications and marketing material with a catalog of 70,000 items. Extensive search facilities are provided, as well as payment options via credit card. A large number of publications are available online in various file formats, which can currently be downloaded free of charge.
Note that PNS subscribers most often order their publications via the Publication Center.
Displayable softcopy publications
All product publications are offered in displayable softcopy form. Software and optional features publications related to this product can also be downloaded from the IBM Network Attached Storage (NAS) Support Web site at
Click the specific product or feature link, select the
Install and Use
tab, and then click the
documentation
link to see the publications available for the selected product or
feature.
Back to top
|
|
| Services |
|
IBM Integrated Technology Services
IBM services include business consulting, outsourcing, hosting services, applications, and other technology management.
These services help you learn about, plan, install, manage, or optimize your IT infrastructure to be an On Demand Business. They can help you integrate your high-speed networks, storage systems, application servers, wireless protocols, and an array of platforms, middleware, and communications software for IBM and many non-IBM offerings. IBM is your one-stop shop for IT support needs.
For details on available services, contact your IBM representative or visit
For details on available IBM Business Continuity and Recovery Services, contact your IBM representative or visit
For details on education offerings related to specific products, visit
Select your country, and then select the product as the category.
Back to top
|
|
| Technical information |
|
Specified operating environment
Physical specifications
IBM System Storage N7600 gateway (per node)
- Width: 446 mm (17.6 in)
-
Depth:
- 782 mm (30.8 in) with cable management tray
- 695 mm (27.4 in) without cable management tray
- Height: 263 mm (10.4 in)
- Weight: 54.8 kg (121 lb)
To assure installability and serviceability in non-IBM industry standard racks, review the installation planning information for any product specific installation requirements.
Standards
Safety
- EN 60950: 2000
- CE Mark (EU)
- UL60950-2000
- CSA 60950-00
- CB IEC 60950 Ed.3 (worldwide)
- EN60825-1: 1994+A11
- IRAM
- GOST-R
- NOM (Mexico)
EMC
- FCC Class A
- EN55022: 1998
- EN61000-3-2
- EN61000-3-3
- CE
- ACA C-Tick
- VCCI
Immunity
- EN55024: 1998
Operating environment
-
Temperature:
- Maximum range: 10° to 40°C (50° to 104°F)
- Recommended: 20° to 25°C (68° to 77°F)
- Non-operating: -40° to 65°C (-40° to 149°F)
-
Relative humidity:
- Recommended operating range: 40% to 55%
- Maximum wet bulb: 28°C
-
Maximum altitude: 2133 m (7,000 ft.)
Note: Operating at extremes of environment may increase failure probability.
- Relative humidity: 10% to 90% (percent, non-condensing)
- Wet bulb (caloric value): 1,215 Btu/hr (fully loaded shelf)
- Maximum electrical power: 100-240 V ac, 12-6 A, 50/60 Hz
-
Nominal electrical power:
- 100 to 120 V ac, 4 A
- 200 to 240 V ac, 2 A
-
Noise level:
- 49 dBa @ 1 m @ 23°C
- 5 bels @ 1 m @ 23°C
Hardware requirements
Licensed machine code (LMC)
The N7600 requires licensed machine code (LMC) level 7.2, or later. Some N7600 features and functions may not be available or supported in all environments. Current information on supported environments, prerequisites, and minimum operating systems levels is available at
Current license terms for the machine code provided with this product prohibit transfer of the machine code without approval from Network Appliance.
Licensed functions
The following licensed function is required on the N7600:
- Data ONTAP (feature number 7700 or 7750)
Licensed functions require the selection of N7600 Model A10 or Model A20 features and the acquisition of the corresponding IBM 2870 Model 665 or 666 function authorization features.
Software requirements
Current information on servers, operating systems, host adapters, and connectivity products supported by the N7600 is available at
Limitations
- The N7600 is supported only in rack installations.
- This product is functional with the iSeries™ and OpenPower™ platforms. However, on the iSeries, support is available only on Linux on Power and AIX partitions, not i5/OS™.
- Current license terms for the machine code provided with this product prohibit transfer of the machine code without approval from Network Appliance.
Planning information
Customer responsibilities: Following good safety practice, IBM recommends that three or more persons install this product.
Physical configuration and installation planning for the 2866 is a customer responsibility. Information about physical configuration and installation requirements, including equipment, site, and power requirements, can be found in the IBM System Storage N7600 and N7800 Filer Installation and Setup Instructions (GC26-7954).
A customer-supplied Ethernet cable is required to connect the machine to a server or Ethernet network.
Cable orders: For the two-node Model A20, cluster cables are required to connect the nodes.
Installability: Estimated time to unpack an IBM System Storage N7600, install it in the rack, and perform a simple discovery and configuration is two hours.
Security, auditability, and control
This product uses the security and auditability features of host hardware, host software, and/or application software to which it is attached.
The customer is responsible for evaluation, selection, and implementation of security features,
administrative procedures, and appropriate controls in application systems and communications
facilities.
Back to top
|
|
| Terms and conditions |
|
Volume orders: Contact your IBM representative.
IBM Global Financing: Yes
Warranty period: Three years
Warranty service: If required, IBM provides repair or exchange service depending on the types of warranty service specified for the machine. IBM will attempt to resolve your problem over the telephone, or electronically via an IBM Web site. You must follow the problem determination and resolution procedures that IBM specifies. Scheduling of service will depend upon the time of your call and is subject to parts availability. If applicable to your product, parts considered Customer Replaceable Units (CRUs) will be provided as part of the machine's standard warranty service.
Service levels are response time objectives and are not guaranteed. The specified level of warranty service may not be available in all worldwide locations. Additional charges may apply outside IBM's normal service area. Contact your local IBM representative or your reseller for country and location specific information. This product is covered by the following types of service.
CRU service and on-site for other selected parts
CRU service
IBM provides replacement CRUs to you for you to install. CRU information and replacement instructions are shipped with your machine and are available from IBM upon your request. CRUs are designated as being either a Tier 1 or a Tier 2 CRU.
Tier 1 CRU
Installation of Tier 1 CRUs is your responsibility. If IBM installs a Tier 1 CRU at your request, you will be charged for the installation.
For machines with on-site same-day response service IBM will replace a Tier 1 CRU part at your request, at no additional charge.
Tier 2 CRU
You may install a Tier 2 CRU yourself or request IBM to install it, at no additional charge.
Based upon availability, CRUs will be shipped for next business day delivery. IBM specifies, in the materials shipped with a replacement CRU, whether a defective CRU must be returned to IBM. When return is required, (1) return instructions and a container is shipped with the replacement CRU and (2) you may be charged for the replacement CRU if IBM does not receive the defective CRU within 30 days of your receipt of the replacement.
The following parts have been designated as Tier 1 CRU parts:
- AC power cord
- AC power supply
- Disk drive
- Cables
- Memory modules
- Wrap plug
- Operator panel
On-site service
IBM will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well lit, and suitable for the purpose.
- 9 hours per day, Monday through Friday, excluding holidays, next-business-day response
Warranty service upgrades and maintenance service options
Warranty service upgrades: During the warranty period, warranty service upgrades provide an enhanced level of on-site service for an additional charge. A warranty service upgrade must be purchased during the warranty period and is for a fixed term (duration). It is not refundable or transferable and may not be prorated. If required, IBM will provide the warranty service upgrade enhanced level of on-site service acquired by the customer. Service levels are response time objectives and are not guaranteed.
IBM will attempt to resolve your problem over the telephone or electronically by access to an IBM Web site. You must follow the problem determination and resolution procedures that IBM specifies. Scheduling of service will depend upon the time of your call and is subject to parts availability.
On-site service
IBM will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well lit, and suitable for the purpose. The following service selections are available as warranty upgrades for your machine type.
- 9 hours per day, Monday through Friday, excluding holidays, 4-hour average, same-business-day response, IOR
- 24 hours per day, 7 days a week, 4-hour average response, IOR
- 24 hours per day, 7 days a week, 2-hour average response, IOR
Customer Replaceable Units (CRUs) may be provided as part of the Machine's standard warranty CRU Service except that you may install a CRU yourself or request IBM installation, at no additional charge, under one of the On-site Service levels specified above. For additional information on the CRU service, refer to warranty information.
Maintenance services
If required, IBM provides repair or exchange service depending on the types of maintenance service specified for the machine. IBM will attempt to resolve your problem over the telephone or electronically, via an IBM Web site. You must follow the problem determination and resolution procedures that IBM specifies. Scheduling of service will depend upon the time of your call and is subject to parts availability. Service levels are response time objectives and are not guaranteed. The specified level of maintenance service may not be available in all worldwide locations. Additional charges may apply outside IBM's normal service area. Contact your local IBM representative or your reseller for country and location specific information. The following service selections are available as maintenance options for your machine type.
On-site service
IBM will repair the failing machine at your location and verify its operation. You must provide suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well lit, and suitable for the purpose.
- 9 hours per day, Monday through Friday, excluding holidays, next-business-day response, IOR
- 9 hours per day, Monday through Friday, excluding holidays, 4 hour average response, IOR
- 24 hours per day, 7 days a week, 4-hour average response, IOR
- 24 hours per day, 7 days a week, 2-hour average response, IOR
CRUs
If your problem can be resolved with a CRU (for example, keyboard, mouse, speaker, memory, or hard disk drive), and depending upon the maintenance service offerings in your geography, IBM will ship the CRU to you for you to install. CRU information and replacement instructions are shipped with your machine and are available from IBM upon your request.
Based upon availability, CRUs will be shipped for next business day delivery. IBM specifies, in the materials shipped with a replacement CRU, whether a defective CRU must be returned to IBM. When return is required, (1) return instructions and a container is shipped with the replacement CRU and (2) you may be charged for the replacement CRU if IBM does not receive the defective CRU within 30 days of your receipt of the replacement.
CRUs may be provided as part of the machine's standard maintenance service except that you may install a CRU yourself or request IBM installation, at no additional charge, under any of the On-site Service levels specified above.
Usage plan machine: No
IBM hourly service rate classification
One
When a type of service involves the exchange of a machine part, the replacement may not be new, but will be in good working order.
Field-installable features: Yes
Model conversions: Yes
Machine installation: Installation is performed by IBM. IBM will install the machine in accordance with the IBM installation procedures for the machine. In the United States, contact IBM at 800-IBM-SERV (426-7378), in other countries contact the local IBM office.
The Machine Installation Guide specifies site preparation, physical requirements and installation (operating) environment, and any cabling included in the installation along with the approximate installation time in hours. Customer requests for installation of items not covered in the installation guide may be performed at IBM's hourly service rate designated for the machine.
Graduated Program License Charges apply: No
Licensed machine code: This product contains, or is provided together with, code which is licensed to the user, not sold. That code is copyrighted and may be the property of IBM, its suppliers or other third parties. You are authorized to use the code to the extent set forth in the applicable license agreement provided with the product. You may also obtain a copy of applicable license agreement by contacting your IBM representative.
Current license terms for the machine code provided with this product prohibit transfer of the machine code without approval from Network Appliance.
Machines using machine code: 2866-G10, 2866-G20
IBM may release changes to the machine code. IBM plans to make the machine code changes available for download from the IBM System Storage technical support Web site
If the machine does not function as warranted and your problem can be resolved through your application of downloadable machine code, you are responsible for downloading and installing these designated machine code changes as IBM specifies. If you would prefer, you may request IBM to install downloadable machine code changes; however, you may be charged for that service.
Educational allowance available
A reduced charge is available to qualified education customers. The
educational allowance may not be added to any other discount or
allowance.
Back to top
|
|
| Prices |
|
The prices provided in this announcement are suggested retail prices for the U.S. only and are provided for your information only. Dealer prices may vary, and prices may also vary by country. Prices are subject to change without notice. For additional information and current prices, contact your local IBM representative.
Product charges
Machine Feature Purchase
Description type Model number price
N7600 Model G10 2866 G10 $113,500
N7600 Model G20 2866 G20 170,000
1-Port 10GbE TOE NIC 2866 G10, G20 1008 15,000
4-Port Cu GbE TOE NIC 2866 G10, G20 1009 5,800
2-Port iSCSI Target 2866 G10, G20 1010 2,000
CU NIC
2-Port iSCSI Target 2866 G10, G20 1011 2,300
Fi NIC
2-Port Fiber GbE NIC 2866 G10, G20 1012 2,195
2-Port Cu GbE NIC 2866 G10, G20 1013 950
4-Gbps FC HBA -- Disk, 2866 G10, G20 1014 4,500
2-port
4-Gbps FC HBA -- Tape, 2866 G10, G20 1015 4,500
2-port
SCSI LVD Tape Adapter 2866 G10, G20 1016 600
2-Port 4-Gbps FC 2866 G10, G20 1017 2,300
HBA-Target
2m Copper Cluster 4X 2866 G20 1037 75
IB Cbl
5m Copper Cluster 4X 2866 G20 1038 97
IB Cbl
10m Copper Cluster 4X 2866 G20 1039 178
IB Cbl
5m Fiber Cluster 4X 2866 G20 1040 139
IB Cbl
30m Fiber Cluster 4X 2866 G20 1041 320
IB Cbl
Copper-Fiber Converter 2866 G20 1042 505
5m 50-micron MMF Cable 2866 G10, G20 1045 150
30m 50-micron MMF Cable 2866 G10, G20 1046 250
100-240 V ac Power Supply 2866 G10, G20 1100 0
Licensed Function Indicators
Data ONTAP 2866 G10 7700 0 CIFS 2866 G10 7701 0 HTTP 2866 G10 7702 0 NFS 2866 G10 7703 0 FlexClone 2866 G10 7705 0 MultiStore 2866 G10 7706 0 SnapMirror 2866 G10 7707 0 SnapLock Enterprise 2866 G10 7709 0 SnapMover 2866 G10 7710 0 SnapRestore 2866 G10 7711 0 SnapVault Primary 2866 G10 7712 0 SnapVault Secondary 2866 G10 7713 0 LockVault Enterprise 2866 G10 7715 0 SyncMirror 2866 G10 7716 0 SnapValidator 2866 G10 7717 0 Fibre Channel Protocol 2866 G10 7718 0 SnapManager/Exchange 2866 G10 7720 0 -- Filer SnapManager/SQL -- Filer 2866 G10 7721 0 Data ONTAP 2866 G20 7750 0 CIFS 2866 G20 7751 0 HTTP 2866 G20 7752 0 NFS 2866 G20 7753 0 CFO 2866 G20 7754 0 FlexClone 2866 G20 7755 0 MultiStore 2866 G20 7756 0 SnapMirror 2866 G20 7757 0 SnapLock Enterprise 2866 G20 7759 0 SnapMover 2866 G20 7760 0 SnapRestore 2866 G20 7761 0 SnapVault Primary 2866 G20 7762 0 SnapVault Secondary 2866 G20 7763 0 LockVault Enterprise 2866 G20 7765 0 SyncMirror 2866 G20 7766 0 SnapValidator 2866 G20 7767 0 Fibre Channel Protocol 2866 G20 7768 0 SnapManager/Exchange 2866 G20 7770 0 -- Filer SnapManager/SQL -- Filer 2866 G20 7771 0
Host software
SnapDrive -- AIX 2866 G10, G20 8000 0 1-2 Procs SnapDrive -- AIX 2866 G10, G20 8001 0 3-4 Procs SnapDrive -- AIX 2866 G10, G20 8002 0 5-8 Procs SnapDrive -- AIX 2866 G10, G20 8003 0 9+ Procs SnapDrive -- HPUX 2866 G10, G20 8004 0 1-2 Procs SnapDrive -- HPUX 2866 G10, G20 8005 0 3-4 Procs SnapDrive -- HPUX 2866 G10, G20 8006 0 5-8 Procs SnapDrive -- HPUX 2866 G10, G20 8007 0 9+ Procs SnapDrive -- Solaris 2866 G10, G20 8008 0 1-2 Proc SnapDrive -- Solaris 2866 G10, G20 8009 0 3-4 Proc SnapDrive -- Solaris 2866 G10, G20 8010 0 5-8 Proc SnapDrive -- Solaris 2866 G10, G20 8011 0 9+ Procs SnapDrive -- Linux 2866 G10, G20 8020 0 1-2 Procs SnapDrive -- Linux 2866 G10, G20 8021 0 3-4 Procs SnapDrive -- Linux 2866 G10, G20 8022 0 5-8 Procs SnapDrive -- Linux 2866 G10, G20 8023 0 9+ Procs SnapDrive for UNIX 2866 G10, G20 8040 0 Media Kit SnapDrive for Windows 2866 G10, G20 8050 0 SnapDrive for Win 2866 G10, G20 8051 0 Media Kit FCP Host Attach Kit 2866 G10, G20 8100 0 -- Win FCP Multipathing Dvr 2866 G10, G20 8101 0 -- Win Base FCP Host Atch 2866 G10, G20 8110 0 Kit -- AIX AIX Multipathing 2866 G10, G20 8111 0 -- 1-2 Procs AIX Multipathing -- 2866 G10, G20 8112 0 3-4 Procs AIX Multipathing -- 2866 G10, G20 8113 0 5-8 Procs AIX Multipathing -- 2866 G10, G20 8114 0 9+ Procs AIX Media Kit for 2866 G10, G20 8119 0 Multipath FCP Host Attach Kit -- 2866 G10, G20 8120 0 Linux FCP Host Attach Kit -- 2866 G10, G20 8121 0 HPUX FCP Host Atch Kit -- 2866 G10, G20 8122 0 Solaris SnapManager/Exchange -- 2866 G10, G20 8131 0 Host SnapManager/Exch -- 2866 G10, G20 8132 0 Media Kit SnapManager for SQL 2866 G10, G20 8141 0 -- Host SnapManager/SQL -- 2866 G10, G20 8142 0 Media Kit Single Mbox Recovery 2866 G10, G20 8150 0 100 pk Single Mbox Recovery 2866 G10, G20 8151 0 500 pk Single Mbox Recovery 2866 G10, G20 8152 0 1000 pk Single Mbox Recovery 2866 G10, G20 8153 0 2500pk Single Mbox Recovery 2866 G10, G20 8154 0 5K pk Single Mbox Recovery 2866 G10, G20 8155 0 10K pk Single Mbox Recovery 2866 G10, G20 8156 0 50K pk Single Mbox Recovery 2866 G10, G20 8157 0 Med Kt SMBR CA-ARCSERVE 2866 G10, G20 8158 0 Extract Wiz SMBR Tivoli Tape 2866 G10, G20 8159 0 Extract Wiz SMBR Legato Tape 2866 G10, G20 8160 0 Extract Wiz SMBR NetBackup Extract 2866 G10, G20 8161 0 Wiz SMBR PST Tape Extract Wiz 2866 G10, G20 8162 0 SMBR HP Extract Wiz 2866 G10, G20 8163 0 Data Fabric Manager Core 2866 G10, G20 8250 0 DFM Bus. Continuance 2866 G10, G20 8252 0 Option DFM Store Resource Mgmt 2866 G10, G20 8253 0 Opt DFM Media Kit 2866 G10, G20 8254 0
Power Cords
PDU Pwr Cord, 42U Rack 2866 G10, G20 9000 0 Power Cord, Cont. Europe 2866 G10, G20 9001 0 Power Cord, United Kingdom 2866 G10, G20 9002 0 Power Cord, Japan 2866 G10, G20 9003 0 Power Cord, North America 2866 G10, G20 9004 0 Power Cord, Australia/N.Z. 2866 G10, G20 9005 0 Power Cord, Switzerland 2866 G10, G20 9006 0 Power Cord, Argentina 2866 G10, G20 9007 0 Power Cord, China 2866 G10, G20 9008 0 Power Cord, Denmark 2866 G10, G20 9009 0 Power Cord, India/ 2866 G10, G20 9010 0 S. Africa Power Cord, Israel 2866 G10, G20 9011 0 Power Cord, Italy 2866 G10, G20 9012 0 Power Cord, N.America 250V 2866 G10, G20 9013 0 Power Cord, Brazil 2866 G10, G20 9014 0 Power Cord, Taiwan 2866 G10, G20 9015 0 Power Cord, Taiwan 250V 2866 G10, G20 9016 0
Installation
Field install rack 2866 G10, G20 9202 100 mount kit
Global Finance transaction
IGF Transaction Indicator 2866 G10, G20 9556 NC
Port/loop counts
Number of FC Target Ports 2866 G10, G20 9557 NC
NC = No charge
Machine/ Plant/
model/ Field MES Cabl CSU
feature install removal req. (1)
1-Port 10GbE TOE NIC 2866/G10/1008 Both N N Y
4-Port Cu GbE TOE NIC 2866/G10/1009 Both N N Y
2-Port iSCSI Target CU NIC 2866/G10/1010 Both N N Y
2-Port iSCSI Target Fi NIC 2866/G10/1011 Both N N Y
2-Port Fiber GbE NIC 2866/G10/1012 Both N N Y
2-Port Cu GbE NIC 2866/G10/1013 Both N N Y
4-Gbps FC HBA -- Disk, 2866/G10/1014 Both N N Y
2-port
4-Gbps FC HBA -- Tape, 2866/G10/1015 Both N N Y
2-port
SCSI LVD Tape Adapter 2866/G10/1016 Both N N Y
2-Port 4-Gbps FC 2866/G10/1017 Both N N Y
HBA-Target
5m 50-micron MMF Cable 2866/G10/1045 Both N N Y
30m 50-micron MMF Cable 2866/G10/1046 Both N N Y
100-240 V ac Power Supply 2866/G10/1100 Plant N N Y
Data ONTAP 2866/G10/7700 Both N(2) N Y
CIFS 2866/G10/7701 Both N(2) N Y
HTTP 2866/G10/7702 Both N(2) N Y
NFS 2866/G10/7703 Both N(2) N Y
FlexClone 2866/G10/7705 Both N(2) N Y
MultiStore 2866/G10/7706 Both N(2) N Y
SnapMirror 2866/G10/7707 Both N(2) N Y
SnapLock Enterprise 2866/G10/7709 Both N(2) N Y
SnapMover 2866/G10/7710 Both N(2) N Y
SnapRestore 2866/G10/7711 Both N(2) N Y
SnapVault Primary 2866/G10/7712 Both N(2) N Y
SnapVault Secondary 2866/G10/7713 Both N(2) N Y
LockVault Enterprise 2866/G10/7715 Both N(2) N Y
SyncMirror 2866/G10/7716 Both N(2) N Y
SnapValidator 2866/G10/7717 Both N(2) N Y
Fibre Channel Protocol 2866/G10/7718 Both N(2) N Y
SnapManager/Exchange 2866/G10/7720 Both N(2) N Y
-- Filer
SnapManager/SQL -- 2866/G10/7721 Both N(2) N Y
Filer
SnapDrive -- AIX 2866/G10/8000 Both N N Y
1-2 Procs
SnapDrive -- AIX 2866/G10/8001 Both N N Y
3-4 Procs
SnapDrive -- AIX 2866/G10/8002 Both N N Y
5-8 Procs
SnapDrive -- AIX 2866/G10/8003 Both N N Y
9+ Procs
SnapDrive -- HPUX 2866/G10/8004 Both N N Y
1-2 Procs
SnapDrive -- HPUX 2866/G10/8005 Both N N Y
3-4 Procs
SnapDrive -- HPUX 2866/G10/8006 Both N N Y
5-8 Procs
SnapDrive -- HPUX 2866/G10/8007 Both N N Y
9+ Procs
SnapDrive -- Solaris 2866/G10/8008 Both N N Y
1-2 Proc
SnapDrive -- Solaris 2866/G10/8009 Both N N Y
3-4 Proc
SnapDrive -- Solaris 2866/G10/8010 Both N N Y
5-8 Proc
SnapDrive -- Solaris 2866/G10/8011 Both N N Y
9+ Procs
SnapDrive -- Linux 2866/G10/8020 Both N N Y
1-2 Procs
SnapDrive -- Linux 2866/G10/8021 Both N N Y
3-4 Procs
SnapDrive -- Linux 2866/G10/8022 Both N N Y
5-8 Procs
SnapDrive -- Linux 2866/G10/8023 Both N N Y
9+ Procs
SnapDrive for UNIX 2866/G10/8040 Both N N Y
Media Kit
SnapDrive for Windows 2866/G10/8050 Both N N Y
SnapDrive for Win 2866/G10/8051 Both N N Y
Media Kit
FCP Host Attach Kit 2866/G10/8100 Both N N Y
-- Win
FCP Multipathing Dvr 2866/G10/8101 Both N N Y
-- Win
Base FCP Host Atch Kit 2866/G10/8110 Both N N Y
-- AIX
AIX Multipathing -- 2866/G10/8111 Both N N Y
1-2 Procs
AIX Multipathing -- 2866/G10/8112 Both N N Y
3-4 Procs
AIX Multipathing -- 2866/G10/8113 Both N N Y
5-8 Procs
AIX Multipathing -- 2866/G10/8114 Both N N Y
9+ Procs
AIX Media Kit for 2866/G10/8119 Both N N Y
Multipath
FCP Host Attach Kit 2866/G10/8120 Both N N Y
-- Linux
FCP Host Attach Kit 2866/G10/8121 Both N N Y
-- HPUX
FCP Host Atch Kit -- 2866/G10/8122 Both N N Y
Solaris
SnapManager/Exchange 2866/G10/8131 Both N N Y
-- Host
SnapManager/Exch -- 2866/G10/8132 Both N N Y
Media Kit
SnapManager for SQL 2866/G10/8141 Both N N Y
-- Host
SnapManager/SQL -- 2866/G10/8142 Both N N Y
Media Kit
Single Mbox Recovery 2866/G10/8150 Both N N Y
100 pk
Single Mbox Recovery 2866/G10/8151 Both N N Y
500 pk
Single Mbox Recovery 2866/G10/8152 Both N N Y
1000 pk
Single Mbox Recovery 2866/G10/8153 Both N N Y
2500 pk
Single Mbox Recovery 2866/G10/8154 Both N N Y
5K pk
Single Mbox Recovery 2866/G10/8155 Both N N Y
10K pk
Single Mbox Recovery 2866/G10/8156 Both N N Y
50K pk
Single Mbox Recovery 2866/G10/8157 Both N N Y
Med Kt
SMBR CA-ARCSERVE 2866/G10/8158 Both N N Y
Extract Wiz
SMBR Tivoli Tape 2866/G10/8159 Both N N Y
Extract Wiz
SMBR Legato Tape 2866/G10/8160 Both N N Y
Extract Wiz
SMBR NetBackup 2866/G10/8161 Both N N Y
Extract Wiz
SMBR PST Tape 2866/G10/8162 Both N N Y
Extract Wiz
SMBR HP Extract Wiz 2866/G10/8163 Both N N Y
Data Fabric Manager Core 2866/G10/8250 Both N N Y
DFM Bus. Continuance 2866/G10/8252 Both N N Y
Option
DFM Store Resource 2866/G10/8253 Both N N Y
Mgmt Opt
DFM Media Kit 2866/G10/8254 Both N N Y
PDU Pwr Cord, 42U Rack 2866/G10/9000 Plant N N Y
Power Cord, Cont. Europe 2866/G10/9001 Plant N N Y
Power Cord, UK 2866/G10/9002 Plant N N Y
Power Cord, Japan 2866/G10/9003 Plant N N Y
Power Cord, North 2866/G10/9004 Plant N N Y
America
Power Cord, Australia/ 2866/G10/9005 Plant N N Y
N.Z.
Power Cord, Switzerland 2866/G10/9006 Plant N N Y
Power Cord, Argentina 2866/G10/9007 Plant N N Y
Power Cord, China 2866/G10/9008 Plant N N Y
Power Cord, Denmark 2866/G10/9009 Plant N N Y
Power Cord, India/ 2866/G10/9010 Plant N N Y
S. Africa
Power Cord, Israel 2866/G10/9011 Plant N N Y
Power Cord, Italy 2866/G10/9012 Plant N N Y
Power Cord, N.America 2866/G10/9013 Plant N N Y
250V
Power Cord, Brazil 2866/G10/9014 Plant N N Y
Power Cord, Taiwan 2866/G10/9015 Plant N N Y
Power Cord, Taiwan 250V 2866/G10/9016 Plant N N Y
(one line removed)
Field install rack 2866/G10/9202 Plant N N Y
mount kit
IGF Transaction Indicator 2866/G10/9556 Field N N Y
Number of FC Target Ports 2866/G10/9557 Plant N N Y
1-Port 10GbE TOE NIC 2866/G20/1008 Both N N Y
4-Port Cu GbE TOE NIC 2866/G20/1009 Both N N Y
2-Port iSCSI Target CU NIC 2866/G20/1010 Both N N Y
2-Port iSCSI Target Fi NIC 2866/G20/1011 Both N N Y
2-Port Fiber GbE NIC 2866/G20/1012 Both N N Y
2-Port Cu GbE NIC 2866/G20/1013 Both N N Y
4-Gbps FC HBA -- Disk, 2866/G20/1014 Both N N Y
2-port
4-Gbps FC HBA -- Tape, 2866/G20/1015 Both N N Y
2-port
SCSI LVD Tape Adapter 2866/G20/1016 Both N N Y
2-Port 4-Gbps FC 2866/G20/1017 Both N N Y
HBA-Target
2m Copper Cluster 4X 2866/G20/1037 Both N N Y
IB Cbl
5m Copper Cluster 4X 2866/G20/1038 Both N N Y
IB Cbl
10m Copper Cluster 4X 2866/G20/1039 Both N N Y
IB Cbl
5m Fiber Cluster 4X 2866/G20/1040 Both N N Y
IB Cbl
30m Fiber Cluster 4X 2866/G20/1041 Both N N Y
IB Cbl
Copper-Fiber Converter 2866/G20/1042 Both N N Y
5m 50-micron MMF Cable 2866/G20/1045 Both N N Y
30m 50-micron MMF Cable 2866/G20/1046 Both N N Y
100-240 Vac Power Supply 2866/G20/1100 Plant N N Y
Data ONTAP 2866/G20/7750 Both(3) N N Y
CIFS 2866/G20/7751 Both N N Y
HTTP 2866/G20/7752 Both N N Y
NFS 2866/G20/7753 Both N N Y
CFO 2866/G20/7754 Both(3) N N Y
FlexClone 2866/G20/7755 Both N N Y
MultiStore 2866/G20/7756 Both N N Y
SnapMirror 2866/G20/7757 Both N N Y
SnapLock Enterprise 2866/G20/7759 Both N N Y
SnapMover 2866/G20/7760 Both N N Y
SnapRestore 2866/G20/7761 Both N N Y
SnapVault Primary 2866/G20/7762 Both N N Y
SnapVault Secondary 2866/G20/7763 Both N N Y
LockVault Enterprise 2866/G20/7765 Both N N Y
SyncMirror 2866/G20/7766 Both N N Y
SnapValidator 2866/G20/7767 Both N N Y
Fibre Channel Protocol 2866/G20/7768 Both N N Y
SnapManager/Exchange 2866/G20/7770 Both N N Y
-- Filer
SnapManager/SQL -- 2866/G20/7771 Both N N Y
Filer
SnapDrive -- AIX 2866/G20/8000 Both N N Y
1-2 Procs
SnapDrive -- AIX 2866/G20/8001 Both N N Y
3-4 Procs
SnapDrive -- AIX 2866/G20/8002 Both N N Y
5-8 Procs
SnapDrive -- AIX 2866/G20/8003 Both N N Y
9+ Procs
SnapDrive -- HPUX 2866/G20/8004 Both N N Y
1-2 Procs
SnapDrive -- HPUX 2866/G20/8005 Both N N Y
3-4 Procs
SnapDrive -- HPUX 2866/G20/8006 Both N N Y
5-8 Procs
SnapDrive -- HPUX 2866/G20/8007 Both N N Y
9+ Procs
SnapDrive -- Solaris 2866/G20/8008 Both N N Y
1-2 Proc
SnapDrive -- Solaris 2866/G20/8009 Both N N Y
3-4 Proc
SnapDrive -- Solaris 2866/G20/8010 Both N N Y
5-8 Proc
SnapDrive -- Solaris 2866/G20/8011 Both N N Y
9+ Procs
SnapDrive -- Linux 2866/G20/8020 Both N N Y
1-2 Procs
SnapDrive -- Linux 2866/G20/8021 Both N N Y
3-4 Procs
SnapDrive -- Linux 2866/G20/8022 Both N N Y
5-8 Procs
SnapDrive -- Linux 2866/G20/8023 Both N N Y
9+ Procs
SnapDrive for UNIX 2866/G20/8040 Both N N Y
Media Kit
SnapDrive for Windows 2866/G20/8050 Both N N Y
SnapDrive for Win 2866/G20/8051 Both N N Y
Media Kit
FCP Host Attach Kit 2866/G20/8100 Both N N Y
-- Win
FCP Multipathing Dvr 2866/G20/8101 Both N N Y
-- Win
Base FCP Host Atch 2866/G20/8110 Both N N Y
Kit -- AIX
AIX Multipathing -- 2866/G20/8111 Both N N Y
1-2 Procs
AIX Multipathing -- 2866/G20/8112 Both N N Y
3-4 Procs
AIX Multipathing -- 2866/G20/8113 Both N N Y
5-8 Procs
AIX Multipathing -- 2866/G20/8114 Both N N Y
9+ Procs
AIX Media Kit for 2866/G20/8119 Both N N Y
Multipath
FCP Host Attach Kit 2866/G20/8120 Both N N Y
-- Linux
FCP Host Attach Kit 2866/G20/8121 Both N N Y
-- HPUX
FCP Host Atch Kit -- 2866/G20/8122 Both N N Y
Solaris
SnapManager/Exchange 2866/G20/8131 Both N N Y
-- Host
SnapManager/Exch 2866/G20/8132 Both N N Y
-- Media Kit
SnapManager for SQL 2866/G20/8141 Both N N Y
-- Host
SnapManager/SQL -- 2866/G20/8142 Both N N Y
Media Kit
Single Mbox Recovery 2866/G20/8150 Both N N Y
100 pk
Single Mbox Recovery 2866/G20/8151 Both N N Y
500 pk
Single Mbox Recovery 2866/G20/8152 Both N N Y
1000pk
Single Mbox Recovery 2866/G20/8153 Both N N Y
2500pk
Single Mbox Recovery 2866/G20/8154 Both N N Y
5K pk
Single Mbox Recovery 2866/G20/8155 Both N N Y
10K pk
Single Mbox Recovery 2866/G20/8156 Both N N Y
50K pk
Single Mbox Recovery 2866/G20/8157 Both N N Y
Med Kt
SMBR CA-ARCSERVE Extract 2866/G20/8158 Both N N Y
Wiz
SMBR Tivoli Tape Extract 2866/G20/8159 Both N N Y
Wiz
SMBR Legato Tape Extract 2866/G20/8160 Both N N Y
Wiz
SMBR NetBackup Extract 2866/G20/8161 Both N N Y
Wiz
SMBR PST Tape Extract 2866/G20/8162 Both N N Y
Wiz
SMBR HP Extract Wiz 2866/G20/8163 Both N N Y
Data Fabric Manager Core 2866/G20/8250 Both N N Y
DFM Bus. Continuance 2866/G20/8252 Both N N Y
Option
DFM Store Resource 2866/G20/8253 Both N N Y
Mgmt Opt
DFM Media Kit 2866/G20/8254 Both N N Y
PDU Pwr Cord, 42U Rack 2866/G20/9000 Plant N N Y
Power Cord, Cont. Europe 2866/G20/9001 Plant N N Y
Power Cord, UK 2866/G20/9002 Plant N N Y
Power Cord, Japan 2866/G20/9003 Plant N N Y
Power Cord, North America 2866/G20/9004 Plant N N Y
Power Cord, Australia/N.Z. 2866/G20/9005 Plant N N Y
Power Cord, Switzerland 2866/G20/9006 Plant N N Y
Power Cord, Argentina 2866/G20/9007 Plant N N Y
Power Cord, China 2866/G20/9008 Plant N N Y
Power Cord, Denmark 2866/G20/9009 Plant N N Y
Power Cord, India/ 2866/G20/9010 Plant N N Y
S. Africa
Power Cord, Israel 2866/G20/9011 Plant N N Y
Power Cord, Italy 2866/G20/9012 Plant N N Y
Power Cord, N.America 250V 2866/G20/9013 Plant N N Y
Power Cord, Brazil 2866/G20/9014 Plant N N Y
Power Cord, Taiwan 2866/G20/9015 Plant N N Y
Power Cord, Taiwan 250V 2866/G20/9016 Plant N N Y
Field install rack 2866/G20/9202 Plant N N Y
mount kit
IGF Transaction Indicator 2866/G20/9556 Field N N Y
Number of FC Target Ports 2866/G20/9557 Plant N N Y
N = No
Y = Yes
Alternative service charges
ICA warranty upgrade
IOR
Machine IBM
type/ on-site repair
model (IOR, 24 x 7)
2866-G10 $ 6,110
2866-G20 10,400
ICA maintenance
IO8 IOR
IBM next day IBM 4-hr resp.
Machine type/ on-site repair on-site repair
model/feature (IOR, 9 x 5) (IOR, 24 x 7)
2866-G10 $ 660 $ 923
2866-G20 989 1,385
2866-G10-7700 0 0
2866-G10-7701 299 419
2866-G10-7702 70 98
2866-G10-7703 340 476
2866-G10-7705 121 169
2866-G10-7706 232 325
2866-G10-7707 515 721
2866-G10-7709 242 339
2866-G10-7710 0 0
2866-G10-7711 80 113
2866-G10-7712 134 188
2866-G10-7713 515 721
2866-G10-7715 757 1,060
2866-G10-7716 0 0
2866-G10-7717 36 50
2866-G10-7718 180 252
2866-G10-7720 180 252
2866-G10-7721 180 252
2866-G10-8000 8 11
2866-G10-8001 15 22
2866-G10-8002 26 36
2866-G10-8003 41 58
2866-G10-8004 8 11
2866-G10-8005 15 22
2866-G10-8006 26 36
2866-G10-8007 41 58
2866-G10-8008 8 11
2866-G10-8009 15 22
2866-G10-8010 26 36
2866-G10-8011 41 58
2866-G10-8020 8 11
2866-G10-8021 15 22
2866-G10-8022 26 36
2866-G10-8023 41 58
2866-G10-8040 0 0
2866-G10-8050 3 5
2866-G10-8051 0 0
2866-G10-8100 4 6
2866-G10-8101 4 6
2866-G10-8110 6 9
2866-G10-8111 21 29
2866-G10-8112 26 36
2866-G10-8113 31 43
2866-G10-8114 52 72
2866-G10-8119 0 0
2866-G10-8120 4 5
2866-G10-8121 0 0
2866-G10-8122 0 0
2866-G10-8131 39 54
2866-G10-8132 0 0
2866-G10-8141 39 54
2866-G10-8142 0 0
2866-G10-8150 10 14
2866-G10-8151 22 30
2866-G10-8152 34 48
2866-G10-8153 70 97
2866-G10-8154 113 158
2866-G10-8155 193 270
2866-G10-8156 943 1,320
2866-G10-8157 0 0
2866-G10-8158 0 0
2866-G10-8159 0 0
2866-G10-8160 0 0
2866-G10-8161 0 0
2866-G10-8162 5 7
2866-G10-8163 0 0
2866-G10-8250 5 8
2866-G10-8252 52 72
2866-G10-8253 52 72
2866-G10-8254 0 0
2866-G20-7750 0 0
2866-G20-7751 539 754
2866-G20-7752 126 176
2866-G20-7753 612 857
2866-G20-7754 258 361
2866-G20-7755 205 287
2866-G20-7756 417 584
2866-G20-7757 928 1,298
2866-G20-7759 437 612
2866-G20-7760 0 0
2866-G20-7761 144 202
2866-G20-7762 242 339
2866-G20-7763 928 1,298
2866-G20-7765 1,365 1,911
2866-G20-7766 0 0
2866-G20-7767 54 76
2866-G20-7768 325 454
2866-G20-7770 325 454
2866-G20-7771 325 454
2866-G20-8000 8 11
2866-G20-8001 15 22
2866-G20-8002 26 36
2866-G20-8003 41 58
2866-G20-8004 8 11
2866-G20-8005 15 22
2866-G20-8006 26 36
2866-G20-8007 41 58
2866-G20-8008 8 11
2866-G20-8009 15 22
2866-G20-8010 26 36
2866-G20-8011 41 58
2866-G20-8020 8 11
2866-G20-8021 15 22
2866-G20-8022 26 36
2866-G20-8023 41 58
2866-G20-8040 0 0
2866-G20-8050 3 5
2866-G20-8051 0 0
2866-G20-8100 4 6
2866-G20-8101 4 6
2866-G20-8110 6 9
2866-G20-8111 21 29
2866-G20-8112 26 36
2866-G20-8113 31 43
2866-G20-8114 52 72
2866-G20-8119 0 0
2866-G20-8120 4 5
2866-G20-8121 0 0
2866-G20-8122 0 0
2866-G20-8131 39 54
2866-G20-8132 0 0
2866-G20-8141 39 54
2866-G20-8142 0 0
2866-G20-8150 10 14
2866-G20-8151 22 30
2866-G20-8152 34 48
2866-G20-8153 70 97
2866-G20-8154 113 158
2866-G20-8155 193 270
2866-G20-8156 943 1,320
2866-G20-8157 0 0
2866-G20-8158 0 0
2866-G20-8159 0 0
2866-G20-8160 0 0
2866-G20-8161 0 0
2866-G20-8162 5 7
2866-G20-8163 0 0
2866-G20-8250 5 8
2866-G20-8252 52 72
2866-G20-8253 52 72
2866-G20-8254 0 0
Annual minimum maintenance charges: For ServiceElect (ESA) Maintenance Service Charges, contact IBM Global Services at 888-IBM-4343 (426-4343).
Model conversion purchase prices
Machine type 2866 From To Returned Model conversion model model parts purchase price G10 G20 No $113,500
Feature conversion purchase price
Feature
conversion
Feature Returned Continuous purchase
from to parts maintenance price
7700 7750 N Y $0
7701 7751 N Y 0
7702 7752 N Y 0
7703 7753 N Y 0
7705 7755 N Y 0
7706 7756 N Y 0
7707 7757 N Y 0
7709 7759 N Y 0
7710 7760 N Y 0
7711 7761 N Y 0
7712 7762 N Y 0
7713 7763 N Y 0
7715 7765 N Y 0
7716 7766 N Y 0
7717 7767 N Y 0
7718 7768 N Y 0
7720 7770 N Y 0
7721 7771 N Y 0
IBM Global Financing
IBM Global Financing offers competitive financing to credit-qualified customers to assist them in acquiring IT solutions. Our offerings include financing for IT acquisition, including hardware, software, and services, both from IBM and other manufacturers or vendors. Offerings (for all customer segments: small, medium, and large enterprise), rates, terms, and availability can vary by country. Contact your local IBM Global Financing organization or visit the Web at
IBM Global Financing offerings are provided through IBM Credit LLC in the United States and other IBM subsidiaries and divisions worldwide to qualified commercial and government customers. Rates are based on a customer's credit rating, financing terms, offering type, equipment type, and options, and may vary by country. Other restrictions may apply. Rates and offerings are subject to change, extension, or withdrawal without notice.
Financing solutions from IBM Global Financing can help you stretch your budget and affordably acquire the new product. But beyond the initial acquisition, our end-to-end approach to IT management can also help keep your technologies current, reduce costs, minimize risk, and preserve your ability to make flexible equipment decisions throughout the entire technology life cycle. For more financing information, visit
Back to top
|
|
| Order now |
|
To order, contact the Americas Call Centers, your local IBM representative, or your IBM Business Partner.
To identify your local IBM representative or IBM Business Partner, call 800-IBM-4YOU (426-4968).
Phone: 800-IBM-CALL (426-2255)
Fax: 800-2IBM-FAX (242-6329)
Internet: callserv@ca.ibm.com
Mail: IBM Americas Call Centers
Dept. Teleweb Customer Support, 9th floor
105 Moatfield Drive
North York, Ontario
Canada M3B 3R1
Reference: YE001
The Americas Call Centers, our national direct marketing organization, can add your name to the mailing list for catalogs of IBM products.
Note: Shipments will begin after the planned availability date.
Trademarks
Back to top
Printable version