IBM WebSphere DataPower SOA Appliances offer a cohesive and holistic solution to help enhance performance, improve the security and control the management of business processes
IBM United States Hardware Announcement 106-253March 28, 2006
 ENUS106253.PDF (44KB)
|
At a glance(Corrected on May 11, 2006)
Feature number 4957 is associated with 7993-44X instead of 7993-43X. UL60960-1 was deleted from the list of supported standards.
(Corrected on March 29, 2006)
The planned availability dates were revised. The Related Options section was revised.
 |
| At a glance |
 |
The IBM WebSphere DataPower SOA Appliances offer:
- 1U (1.75-inch thick) rack-mountable, purpose-built network appliances
- XML/SOAP firewalling, field-level XML security, data validation, XML Web services access control, and service virtualization
- Lightweight and protocol-independent message brokering, integrated message-level security and fine-grained access control, and the ability to bridge mission-critical transaction networks to SOAs and ESBs
- High performance, multi-step, wirespeed message processing, including XML, XSLT, XPath, and XSD
- Centralized Web services policy and service-level management
- WS-* standard support, such as WS-Security, SAML 1.0/1.1/2.0, portions of Liberty Alliance protocol, WS-Federation, WS-Trust, XKMS, Radius, XML Digital Signature, XML-Encryption, WSDM, WS-SecureConversation, SOAP, WSDL, UDDI, and others
- Transport layer flexibility, which supports HTTP/HTTPS, MQ, SSL, FTP, and others
- Scalable, wirespeed, any-to-any message transformation, such as arbitrary binary, flat text and XML messages, which include COBOL Copybook, CORBA, CICS®, ISO 8583, ASN.1, EDI, and others
Back to top
|
|
| Overview |
|
Help simplify, accelerate and enhance the security capabilities of your XML and Web services deployments, and extend the capabilities of your Service Oriented Architecture (SOA) infrastructure with IBM WebSphere® DataPower SOA Appliances. These new appliances can offer an innovative, pragmatic approach to harness the power of SOA as purpose-built, easy-to-consume and easy-to-use products, while simultaneously helping to enable you to leverage the value of your existing infrastructure investments.
The IBM WebSphere DataPower SOA Appliance family includes:
- IBM WebSphere DataPower XML Accelerator XA35
- IBM WebSphere DataPower XML Security Gateway XS40
- IBM WebSphere DataPower Integration Appliance XI50
The IBM WebSphere DataPower SOA Appliance family contains 1U (1.75-inch thick) rack-mountable network devices that can
- Deliver robust middleware functionality in network appliance packaging that greatly simplifies the IT infrastructure
- Enhance security protection for Web services with comprehensive drop-in security functionality
- Accelerate time to deployment and SOA performance, reducing latency and increasing throughput of XML, Web services and SOA processing
Enhanced security: IBM WebSphere DataPower SOA Appliances provide an easy-to-install and easy-to-maintain network appliance that can satisfy both application and network operational groups, supporting current and emerging security standards, as well as XML Web services standards out-of-the-box. Key support includes, but is not limited to, XML/SOAP firewalling, field-level XML security, data validation, XML Web services access control, service virtualization, and SSL acceleration.
Simplicity: IBM WebSphere DataPower SOA Appliances deliver common message transformation, integration and routing functions in a network device, helping to cut operational costs, reduce complexity, and improve performance. By making on demand data integration part of the shared SOA infrastructure, DataPower appliances are designed to be a game-changing approach for application integration and SOA.
Acceleration:
IBM WebSphere DataPower SOA Appliances offer an easy-to-install, drop-in solution that can
streamline XML and Web service deployments, helping lower total cost of ownership and accelerate
return on your assets, as you continue to move to SOA. SOA appliances are purpose-built hardware
devices capable of offloading overtaxed servers by processing XML, Web services and other message
format at wirespeed.
Back to top
|
|
| Key prerequisites |
|
- Network Interface and network cable
- Network information (IP address, DNS, Gateway)
- Computer/console with serial port, keyboard, mouse
Back to top
|
|
| Description |
|
Back to top
|
|
| Planned availability dates |
|
April 3, 2006
- IBM WebSphere DataPower XML Accelerator XA35
- IBM WebSphere DataPower XML Security Gateway XS40
- IBM WebSphere DataPower XML Security Gateway XS40 with HSM
- IBM WebSphere DataPower Integration Appliance XI50
- IBM WebSphere DataPower Integration Appliance XI50 with HSM
- IBM WebSphere DataPower Pin Entry Device for HSM
- IBM WebSphere DataPower Option for Tivoli® Access Manager
June 15, 2006
- IBM WebSphere DataPower Integration Appliance XI50 with XG4
- IBM WebSphere DataPower Integration Appliance XI50 with HSM and XG4
IBM WebSphere DataPower SOA Appliances represent the first of the IBM (Service Oriented Architecture) SOA appliances that support enterprises' embrace of SOA, with a portfolio that can minimize the complexity of implementing SOA infrastructures. IBM WebSphere DataPower SOA Appliances are based on open standards, and can help lower the barriers for SOA deployments by simplifying and accelerating the underlying infrastructure required to process XML, Web services, and legacy messages that form the basis for SOA.
IBM WebSphere DataPower SOA Appliances are 1U (1.75 inch) rack-mountable hardware appliances designed to fit into industry-standard racks, and can be attached to the network through Ethernet. DataPower solutions cannot be taken apart and deployed within other servers. The following three SOA appliances offer expanded capabilities.
IBM WebSphere DataPower XML Security Gateway XS40
This appliance provides a security-enforcement point for XML and Web services transactions, including encryption, firewall filtering, digital signatures, schema validation, WS-Security, XML access control, XPath and detailed logging, and includes:
- An XML/SOAP firewall: The DataPower XML Security Gateway XS40 filters traffic at wirespeed, based on information from layers 2 through 7 of the protocol stack; from field-level message content and SOAP envelopes to IP address, port/hostname, payload size or other metadata. Filters can be predefined with easy point-and-click XPath filtering GUI, and automatically uploaded to change security policies based on the time of day or other triggers.
- XML/SOAP data validation: With its unique ability to perform XML Schema validation as well as message validation, at wirespeed, the XS40 ensures incoming and outgoing XML documents are legitimate and properly structured. This protects against threats such as XML Denial of Service (XDoS) attacks, buffer overflows, or vulnerabilities created by deliberately or inadvertently malformed XML documents.
- Field level message security: The XS40 selectively shares information through encryption/decryption and signing/verification of entire messages or of individual XML fields. These granular and conditional security policies can be based on nearly any variable, including content, IP address, hostname or other user-defined filters.
- XML Web services access control: The XS40 supports a variety of access control mechanisms, including WS-Security, WS-Trust, X.509, SAML, SSL, LDAP, RADIUS and simple client/URL maps. The XS40 can control access rights by rejecting unsigned messages and verifying signatures within SAML assertions.
- Service virtualization: XML Web services require companies to link partners to resources without leaking information about their location or configuration. With the combined power of URL rewriting, high-performance XSL transforms and XML/SOAP routing, the XS40 can transparently map a rich set of services to protected back-end resources with high performance.
- Centralized policy management: The XS40's wirespeed performance enables enterprises to centralize security functions in a single drop-in device that can enhance security and help reduce ongoing maintenance costs. Simple firewall functionality can be configured via a GUI and running in minutes, and using the power of XSLT, the XS40 can also create sophisticated security and routing rules. Because the XS40 works with leading Policy Managers, it is an ideal policy execution engine for securing next generation applications. Manageable locally or remotely, the XS40 supports SNMP, script-based configuration, and remote logging to integrate seamlessly with leading management software.
- Web services management/service level management: With support for Web services Distributed Management (WSDM), Universal Description, Discovery, and Integration (UDDI), Web Services Description Language (WSDL), Dynamic Discovery, and broad support for Service Level Management configurations, the XS40 natively offers a robust Web services management framework for the efficient management of distributed Web service endpoints and proxies in heterogeneous SOA environments, as well as SLM alerts and logging, and pull and enforce policies, which helps enable broad integration support for third-party management systems and unified dashboards, in addition to robust support and enforcement for governance frameworks and policies.
IBM WebSphere DataPower Integration Appliance XI50: This appliance provides transport-independent transformations between binary, flat text files and XML message formats. Visual tools are used to describe data formats, create mappings between different formats and define message choreography. This appliance can transform binary, flat-text and other non-XML messages to help offer an innovative solution for security-rich XML enablement, enterprise message buses and mainframe connectivity.
- Any-to-any Transformation Engine: XI50 can parse and transform arbitrary binary, flat text and XML messages, including EDI, COBOL Copybook, ISO 8583, CSV, ASN.1 and ebXML. Unlike approaches based on custom programming, DataPower's patented DataGlue technology uses a fully declarative, metadata-based approach.
- Integrated Message Level Security: XI50 includes mature message-level security and access control functionality. Messages can be filtered, validated, encrypted and signed, helping to provide more secure enablement of high-value applications. Supported technologies include WS-Security, WS-Trust, SAML and LDAP.
-
Lightweight Message Brokering:
- Sophisticated multi-step message routing, filtering, and processing.
- Multiple synchronous and asynchronous transport protocols.
- Detailed logging and audit trail, including non-repudiation support.
IBM WebSphere DataPower XML Accelerator XA35: This product can help speed common types of XML processing by offloading this processing from servers and networks. It can perform XML parsing, XML Schema validation, XPath routing, Extensible Stylesheet Language Transformations (XSLT), XML compression and other essential XML processing with wirespeed XML performance.
- Unmatched performance: DataPower's purpose-built message processing engine can deliver wirespeed performance for both XML to XML and XML to HTML transformations with increased throughput and decreased latency
- Ease of use: The self-learning XA35 provides drop-in acceleration with virtually no changes to the network or application software. No proprietary schemas, coding or API's are required to install or manage the device and it supports popular XML Integrated Development Environments (IDEs) to help reduce the number of hours spent in the development and debugging of XML applications.
- Helps reduce infrastructure costs: Unlike simple content switches that only redirect business documents, the DataPower XML Accelerator XA35 fully parses, processes and transforms XML with wirespeed performance and scalability to help reduce the need for stacks of servers. The XA35 also supports accelerated SSL processing to help further lessen the load on server software.
- Helps cut development costs: The XA35 can enable multiple applications to leverage a single, uniformed XML processing layer for all XML processing needs. By standardizing on high-performance hardware appliances, enterprises can deploy sophisticated applications while helping to eliminate unnecessary hours of application debugging and tuning for marginal performance gains.
- Intelligent XML processing: In addition to wirespeed processing, DataPower appliances support XML routing, XML pipeline processing, XML compression, XML/XSL caching, as well as other intelligent processing capabilities to help manage XML traffic.
- Advanced management: The DataPower XML Accelerator XA35 provides real-time visibility into critical XML statistics such as throughput, transaction counts, errors, and other processing statistics. Data network level analysis is provided, and includes server health information, and traffic statistics, as well as management and configuration data.
Related options
- IBM WebSphere DataPower Option for Tivoli Access Manager
Back to top
|
|
| Product positioning |
|
To take advantage of the improved business processes, flexibility and IT efficiency that comes with moving to SOA, organizations require pervasive, scalable services and controls, robust security, and high service assurances in their infrastructures. Today, organizations often find themselves struggling to deliver these critical SOA requirements without having to handle prohibitive cost, complexity and hard-to-manage infrastructures. Addressing these challenges requires a pragmatic approach to SOA — one that simultaneously recognizes the evolution of standards, the value of existing infrastructure investments, your organizational challenges and how performance can be affected across applications.
IBM WebSphere DataPower SOA appliances offer a unique way to help simplify deployments, improve performance and enhance the security of SOA implementations. With a broad product family to meet varying enterprise needs, WebSphere DataPower SOA appliances can complement specific IBM or other products to support each stage of the SOA life cycle. You can take advantage of the products' critical transformation, acceleration, security and routing functions to help ease the deployment of your SOA implementations.
DataPower technology can meet the demand for fast, reliable XML processing by providing simple and consumable appliances that transform back-end disparate message formats to XML while applying message-level security and service policies. You can streamline your SOA deployment in a security-rich environment with a WebSphere DataPower SOA appliance that requires minimal configuration, customization and management. You can also accelerate application integration by using a WebSphere DataPower SOA appliance to help minimize the time necessary to implement an infrastructure that can optimally support the IBM SOA Foundation implementation. And they help protect SOA traffic by implementing XML threat protection and Web services security functions as well as integrating with security and identity management software, such as IBM Tivoli software.
By integrating many core functions required for adopting SOA or Web services into a single purpose-built device, appliances can help simplify the overall SOA infrastructure. WebSphere DataPower SOA appliances are designed to easily deploy into an existing environment as an inline device in XML proxy mode or alongside systems in coprocessor mode. You can gain business value from using these appliances without having to change your network or application software — and you can take advantage of IBM autonomic computing self-management capabilities. Proprietary schemas, coding or application programming interfaces (APIs) are not required to install or manage the device.
WebSphere DataPower SOA appliances support IBM Rational® and other popular XML integrated development environments, which helps reduce the time you have to spend in development and debugging. You can also use WebSphere DataPower SOA appliances with IBM WebSphere Application Server, IBM WebSphere Process Server, IBM WebSphere Portal, IBM WebSphere MQ, IBM WebSphere Enterprise Service Bus (ESB) and IBM WebSphere Message Broker to help process XML transactions in a faster, more secure and simpler way.
The integration of WebSphere DataPower SOA appliances with IBM Tivoli Federated Identity Manager and IBM Tivoli Access Manager helps provide more-secure SOA deployments. Tivoli security-management solutions also enable you to centrally manage user accounts and credentials, set security policies and audit XML traffic that is protected by DataPower SOA appliances. Integration with IBM Tivoli Composite Application Manager for SOA enables centralized mediation control, service-level management and dashboard monitoring. The combination of Tivoli software and the robust WebSphere DataPower XML gateway can provide the comprehensive capabilities for SOA security and Web services management that your enterprise requires.
As your organization moves to On Demand Business by implementing an SOA, the largest barriers continue to be scalable integration and application security. As a core part of IBM SOA Foundation, WebSphere DataPower SOA appliances offer easy configuration and operation to help reduce operational complexity. With WebSphere DataPower SOA appliances, IBM can help you simplify, accelerate and secure your SOA deployments to help increase your flexibility — and help enable you to achieve your On Demand Business goals.
Trademarks
Back to top
|
|
| Publications |
|
The following displayable softcopy publications are available and shipped with the product.
- CLI Reference Guide (Vol 1)
- CLI Reference Guide (Vol 2)
- CLI Reference Guide (Vol 3)
- CLI Reference Guide (Vol 4)
- WebGUI User's Guide
- Example Configurations Guide
- Common Install Guide
The following hardcopy documentation is optionally available for a fee.
Order Part
Title number number
IBM WebSphere® DataPower XML 4960 42C4210
Accelerator XA35 Reference Kit
IBM WebSphere DataPower XML 4961 42C4211
Security Gateway XS40
Reference Kit
IBM WebSphere DataPower 4962 42C4212
Integration Appliance XI50
Reference Kit
Displayable softcopy publications:
The product publications are offered in displayable softcopy form. All publications are
included. The files are shipped on CD-ROM with the WebSphere DataPower appliance.
Back to top
|
|
| Technical information |
|
Specified operating environment
Physical specifications
- Height: 4.45 cm (1.75 in)
- Depth: 62.23 cm (24.5 in)
- Width: 44.0 cm (17.34 in)
- Weight: 15 Kg (33 lbs)
The 7993 appliance must be installed in an EIA-310-D 19 inch rack with at least 25 inch of depth.
To assure installability and serviceability in non-IBM industry standard racks, review the installation planning information for any product specific installation requirements.
Standards
- FCC — Verified to comply with Part 15 of the FCC Rules, Class A
- Canada ICES-003, issue 3, Class A
- CSA C22.2 No. 60950 Safety of Information Technology Equipment 60950
Operating environment
- Temperature: 0° to 40.0°C (32° to 104°F)
- Relative Humidity: 10% to 90%, non-condensing
-
Electrical Power:
-
Power usage:
- 100 — 240 V ac; 50 Hz or 60 Hz.
- 4 A for 120 V ac
- 2 A for 220 V ac.
-
Power usage:
- Capacity of Exhaust: cubic meter/min.
- Noise Level: 71-79 dBa
- Maximum altitude: 2,133 m (7000 ft.)
Power considerations
The 7993 appliance contains two 400-watt 100-240V 50-60 Hz power modules. Both modules should be plugged into power sources. There should be no ground potential difference between the two power sources.
Hardware requirements
For first-time configuration of the software, this appliance requires a compatible RS-232c terminal or terminal emulator with a male DB-9 serial port connector. The terminal must support the following RS-232c serial parameters.
- 9600 baud,
- 1 stop bit,
- no parity,
- XON/XOFF handshaking.
The terminal must be support ANSI/VT-100 control sequences. "Hyperterminal" in Windows™ or "Minicom" in Linux™ are appropriate terminal emulators.
Unattended or remote installation may be performed through a network attached terminal server.
Software requirements
The 7993 series appliance comes with IBM supplied software. It is not possible to install any other software.
Compatibility: The 7993 series appliance comes with IBM supplied software. It is not possible to install any other software.
Planning information
Customer responsibilities: This product is designated for customer setup. Customer setup instructions are shipped with the product.
Cable orders: Each 7993 appliance contains four Gigabit Ethernet connections. The RJ-45 connectors provide a 10/100/1000 Base-T interface (either at half- or full-duplex) for connecting twisted-pair cable to the Ethernet network. Cabling is not included with the appliance. To connect the Ethernet controller to a repeater of switch, use an unshielded twisted pair (UTP) cable with RJ-45 connectors at both ends. For 100 Mbps or higher operation, Category 5 cabling must be used. For 10 Mbps operation, Category 3 or better cabling must be used.
Each 7993 appliance contains a single RS-232c serial port connection. The male DB-9 connector provides a 9600 baud asynchronous serial interface for connecting a serial cable to a console terminal (typically a terminal emulator running on an IBM PC). A 6 foot long "NULL modem" cable with two female DB-9 connectors is provided with the appliance for this purpose. The terminal's serial parameters should be set to 9600 baud, no parity, 1 stop bit, XON/XOFF handshaking.
Installability: Each 7993 series appliance requires approximately 30 minutes for installation. Installation includes unpacking, rack-mounting, connecting network and console cables and powering on the system. Additional time is required to configure the software.
Packaging: The 7993 series appliance is shipped in a single package.
- Single pack dimensions: 8 x 22 x 31 in
- Single pack weight: 42 lbs
The 7993 series appliance carton contains
- 7993 series appliance
- Rack-mount kit
- Power cords
- Reference Kit CD-ROM
- Console serial cable
- Printed installation manual
Supplies: No accessories or supplies are required.
Security, auditability, and control
This product has many security features built in including:
- A tamper-evident case, including tamper proof labels, an internal intrusion switch (in order to detect the case being opened), and tamper-proof screws.
- Multiple levels of Command Line Interface (CLI) login capabilities to allow different levels of system administration.
- Encrypted software that cannot be moved between systems prevents installation of arbitrary software on the device.
- The ability to remove customer data if the system had to be replaced because of a hardware failure.
- Our software mediates all access to the device including network services and access.
- The system is secure by default. There are no unneeded services running.
- The initial access after first power up is via a serial port.
- The administration implementation is undergoing Common Criteria EAL4 evaluation for Application Firewall Protection Profile.
The customer is responsible for evaluation, selection, and implementation of security features,
administrative procedures, and appropriate controls in application systems and communications
facilities.
Back to top
|
|
| Terms and conditions |
|
IBM Global Financing: Yes
Warranty period
- Hardware — 3 months
- Software — 3 months
Warranty service
- Hardware Terms: 3 months hardware 5 days per week 9 hours per day e-mail or call support with 2 day hardware advance replace shipment
- Software Terms: 3 months software bug fix
Warranty service:
If required, IBM provides repair or exchange service depending on the types of warranty service specified for the machine. IBM will attempt to resolve your problem over the telephone, or electronically via an IBM Web site. You must follow the problem determination and resolution procedures that IBM specifies. Scheduling of service will depend upon the time of your call and is subject to parts availability. If applicable to your product, parts considered Customer Replaceable Units (CRUs ) will be provided as part of the machine's standard warranty service.
Service levels are response time objectives and are not guaranteed. The specified level of warranty service may not be available in all worldwide locations. Additional charges may apply outside IBM's normal service area. Contact your local IBM representative or your reseller for country and location specific information. This product is covered by the following types of service.
Customer Replaceable Unit Service and On-site for other selected parts.
Customer Replaceable Unit Service: If applicable to your product, IBM provides replacement CRUs to you for you to install. CRU information and replacement instructions are shipped with your machine and are available from IBM upon your request. CRUs are designated as being either a Tier 1 or a Tier 2 CRU.
Tier 1 CRU: Installation of Tier 1 CRUs is your responsibility. If IBM installs a Tier 1 CRU at your request, you will be charged for the installation.
Tier 2 CRU: You may install a Tier 2 CRU yourself or request IBM to install it, at no additional charge.
Based upon availability, CRUs will be shipped for next business day delivery. IBM specifies, in the materials shipped with a replacement CRU, whether a defective CRU must be returned to IBM. When return is required, (1) return instructions and a container is shipped with the replacement CRU and (2) you may be charged for the replacement CRU if IBM does not receive the defective CRU within 30 days of your receipt of the replacement.
- 9 hours per day, Monday through Friday, excluding holidays, 2 day advance hardware replace shipment
End Next-Business Day base warranty
Courier or Depot Service*: You must disconnect the failing machine for collection arranged by IBM.
IBM will provide you with a shipping container for you to return your machine to a designated
service center. A courier will pick up your machine and deliver it to the designated service
center. Following its repair or exchange, IBM will arrange the return delivery of the machine to
your location. You are responsible for its installation and verification.
Customer Carry-In or Mail-In Service: You will deliver or mail, as IBM specifies, (prepaid unless IBM specifies otherwise) the failing machine suitably packaged to a location IBM designates. After IBM has repaired or exchanged the machine, IBM will make it available for your collection or, for mail-in service, IBM will return it to you at IBM's expense, unless IBM specifies otherwise. You are responsible for the subsequent installation and verification of the machine.
Post warranty maintenance services: If required, IBM provides repair or exchange service depending on the types of maintenance service specified for the Machine. IBM will attempt to resolve your problem over the telephone or electronically, via an IBM web site. You must follow the problem determination and resolution procedures that IBM specifies. Scheduling of service will depend upon the time of your call and is subject to parts availability. Service levels are response time objectives and are not guaranteed. The specified level of maintenance service may not be available in all worldwide locations. Additional charges may apply outside IBM's normal service area. Contact your local IBM representative or your reseller for country and location specific information. The following service selections are available as maintenance options for your machine type.
Hardware Terms Software Terms 1 year 12x5 call/e-mail 1 year 12x5 call/e-mail support with machine support, software exchange support, 2 day upgrades and limited hardware advance usage support replace shipment 1 year 24x7 emergency 1 year 24x7 emergency call/e-mail support call/e-mail support, with machine exchange software upgrade and support, 1 day hardware limited usage advance replace shipment support 1 year 24x7 emergency 1 year 24x7 emergency call/e-mail support call/e-mail support, with machine exchange software upgrades, and support, 4 hour on-site limited usage support same business day
Customer Replaceable Units
If your problem can be resolved with a CRU (for example, keyboard, mouse, speaker, memory, or hard disk drive), and depending upon the maintenance service offerings in your geography, IBM will ship the CRU to you for you to install. CRU information and replacement instructions are shipped with your machine and are available from IBM upon your request.
Based upon availability, CRUs will be shipped for next business day delivery. IBM specifies, in the materials shipped with a replacement CRU, whether a defective CRU must be returned to IBM. When return is required, (1) return instructions and a container is shipped with the replacement CRU and (2) you may be charged for the replacement CRU if IBM does not receive the defective CRU within 30 days of your receipt of the replacement.
Customer Replaceable Units (CRUs) may be provided as part of the machine's standard maintenance service except that you may install a CRU yourself or request IBM installation, at no additional charge, under any of the On-site Service levels specified above.
Courier or Depot Service*
You must disconnect the failing machine for collection arranged by IBM. IBM will provide you with a
shipping container for you to return your machine to a designated service center. A courier will
pick up your machine and deliver it to the designated service center. Following its repair or
exchange, IBM will arrange the return delivery of the machine to your location. You are responsible
for its installation and verification.
Customer Carry-In or Mail-In Service
You will deliver or mail, as IBM specifies, (prepaid, unless IBM specifies otherwise) the failing machine suitably packaged to a location IBM designates. After IBM has repaired or exchanged the machine, IBM will make it available for your collection or, for mail-in service, IBM will return it to you at IBM's expense, unless IBM specifies otherwise. You are responsible for the subsequent installation and verification of the machine.
Non-IBM Parts Support
Under certain conditions, IBM repairs selected non-IBM parts at no additional charge for machines that are covered under warranty service upgrades or maintenance services.
IBM Service provides hardware problem determination on non-IBM parts (for example, adapter cards, PCMCIA cards, disk drives, memory) installed within IBM Machines covered under warranty service upgrades or maintenance services and provides the labor to replace the failing parts at no additional charge.
If IBM has a Technical Service Agreement with the manufacturer of the failing part, or if the failing part is an accommodations part (a part with an IBM FRU label), IBM may also source and replace the failing part at no additional charge. For all other non-IBM parts, customers are responsible for sourcing the parts. Installation labor is provided at no additional charge, if the machine is covered under a warranty service upgrade or a maintenance service.
Usage plan machine: No
Field-installable features: No
Model conversions: No
Machine installation: Customer setup: customers are responsible for installation according to the instructions IBM provides with the machine.
Graduated program license charges apply: No. These products do not contain Licensed Internal Code or Licensed Machine Code.
Educational allowance
A reduced charge is available to qualified education customers. The educational allowance may not be added to any other discount or allowance.
|
|
| Prices |
|
The prices provided in this announcement are suggested retail prices for the U.S. only and are provided for your information only. Dealer prices may vary, and prices may also vary by country. Prices are subject to change without notice. For additional information and current prices, contact your local IBM representative.
Product charges
Machine Feature Purchase
Description type Model number price
IBM WebSphere DataPower 7993 22X $ 35,000
XML Accelerator XA35
IBM WebSphere DataPower XML 7993 22X 4960 150
Accelerator XA35 Reference
Kit
IBM WebSphere DataPower XML 7993 22X 4958 4,200
Accelerator XA35 5x12x2 day
Maintenance
IBM WebSphere DataPower XML 7993 22X 4959 5,250
Accelerator XA35 7x24x1 day
Maintenance
IBM WebSphere DataPower XML 7993 22X 4964 9,750
Accelerator XA35 7x24x4hr
Maintenance
IBM WebSphere DataPower 7993 32X 65,000
XML Security Gateway XS40
IBM WebSphere DataPower Option 7993 32X 4950 5,200
for Tivoli Access Manager
IBM WebSphere DataPower XML 7993 32X 4961 150
Security Gateway XS40
Reference Kit
IBM WebSphere DataPower XML 7993 32X 4966 5,450
Security Gateway XS40
5x12x2 day Maintenance
IBM WebSphere DataPower XML 7993 32X 4967 6,750
Security Gateway XS40 7x24x1
day Maintenance
IBM WebSphere DataPower XML 7993 32X 4968 9,750
Security Gateway XS40 7x24x4hr
Maintenance
IBM WebSphere DataPower XML 7993 34X 75,000
Security Gateway XS40 with HSM
IBM WebSphere DataPower Pin 34X 4957 15,000
Entry Device for HSM
IBM WebSphere DataPower Option 34X 4950 5,200
for Tivoli Access Manager
IBM WebSphere DataPower XML 7993 34X 4961 150
Security Gateway XS40
Reference Kit
IBM WebSphere DataPower XML 7993 34X 4966 5,450
Security Gateway XS40
5x12x2 day Maintenance
IBM WebSphere DataPower XML 7993 34X 4967 6,750
Security Gateway XS40 7x24x1
day Maintenance
IBM WebSphere DataPower XML 7993 34X 4968 9,750
Security Gateway XS40 7x24x4hr
Maintenance
IBM WebSphere DataPower 7993 42X 75,000
Integration Appliance XI50
IBM WebSphere DataPower Option 7993 42X 4950 5,200
for Tivoli Access Manager
IBM WebSphere DataPower 7993 42X 4962 150
Integration Appliance XI50
Reference Kit
IBM WebSphere DataPower 7993 42X 4969 5,450
Integration Appliance XI50
5x12x2 day Maintenance
IBM WebSphere DataPower 7993 42X 4970 6,750
Integration Appliance XI50
7x24x1 day Maintenance
IBM WebSphere DataPower 7993 42X 4971 9,750
Integration Appliance XI50
7x24x4hr Maintenance
IBM WebSphere DataPower 7993 43X 85,000
Integration Appliance XI50
with XG4
IBM WebSphere DataPower Option 7993 43X 4950 5,200
for Tivoli Access Manager
IBM WebSphere DataPower 7993 43X 4962 150
Integration Appliance XI50
Reference Kit
IBM WebSphere DataPower 7993 43X 4969 5,450
Integration Appliance XI50
5x12x2 day Maintenance
IBM WebSphere DataPower 7993 43X 4970 6,750
Integration Appliance XI50
7x24x1 day Maintenance
IBM WebSphere DataPower 7993 43X 4971 9,750
Integration Appliance XI50
7x24x4hr Maintenance
IBM WebSphere DataPower 7993 44X 90,000
Integration Appliance XI50
with HSM
IBM WebSphere DataPower Pin 7993 44X 4957 15,000
Entry Device for HSM
IBM WebSphere DataPower Option 7993 44X 4950 5,200
for Tivoli Access Manager
IBM WebSphere DataPower 7993 44X 4962 150
Integration Appliance XI50
Reference Kit
IBM WebSphere DataPower 7993 44X 4969 5,450
Integration Appliance XI50
5x12x2 day Maintenance
IBM WebSphere DataPower 7993 44X 4970 6,750
Integration Appliance XI50
7x24x1 day Maintenance
IBM WebSphere DataPower 7993 44X 4971 9,750
Integration Appliance XI50
7x24x4hr Maintenance
IBM WebSphere DataPower 7993 45X 100,000
Integration Appliance XI50
with HSM and XG4
IBM WebSphere DataPower Pin 7993 45X 4957 15,000
Entry Device for HSM
IBM WebSphere DataPower Option 7993 45X 4950 5,200
for Tivoli Access Manager
IBM WebSphere DataPower 7993 45X 4962 150
Integration Appliance XI50
Reference Kit
IBM WebSphere DataPower 7993 45X 4969 5,450
Integration Appliance XI50
5x12x2 day Maintenance
IBM WebSphere DataPower 7993 45X 4970 6,750
Integration Appliance XI50
7x24x1 day Maintenance
IBM WebSphere DataPower 7993 45X 4971 9,750
Integration Appliance XI50
7x24x4hr Maintenance
Specify features
Line cord - 2.8m, 10A/250V, 7993 All 6222 NC
C13 to IRAM 2073 (Argentina) models
Line cord - 2.8m, 10A/125V, 7993 All 6313 NC
C13 to NEMA 5-15P (U.S.) models
Line cord - 2.8m, 10A/250V, 7993 All 6211 NC
C13 to AS/NZ 3112 models
(Australia/NZ)
Line cord - 2.8m, 10A/250V, 7993 All 6213 NC
C13 to DK2-5a (Denmark) models
Line cord - 2.8m, 10A/250V, 7993 All 6214 NC
C13 to SABS 164 (S Africa) models
Line cord - 2.8m, 10A/250V, 7993 All 6215 NC
C13 to BS 1363/A (UK) models
Line cord - 2.8m, 10A/250V, 7993 All 6216 NC
C13 to SEV 1011-S24507 models
(Swiss)
Line cord - 2.8m, 10A/250V, 7993 All 6218 NC
C13 to SI 32 (Israel) models
Line cord - 2.8m, 12A/100V, 7993 All 6314 NC
C13 to JIS C-8303 (Japan) models
Line cord - 2.8m, 10A/250V, 7993 All 6377 NC
C13 to IEC 309 Type 2P+Gnd models
(Europe)
Line cord - 2.8M, 10A/250V, 7993 All 6269 NC
C13(2P+Gnd) (India) models
Line cord - 2.8m, 10A/250V, 7993 All 6210 NC
C13 to GB 2099.1 (China) models
Line cord - 2.8m, 10A/125V, 7993 All 6386 NC
C13 to CNS 10917-3 (Taiwan) models
Line cord - 2.8M, 12A/250V, 7993 All 6219 NC
C13 to KETI (Korea) models
Field Plant
Feature install install MES Cables
number only only removal required
4957 N Y N N
4950 N Y N N
4954 N Y N N
4956 N Y N N
4963 N Y N N
4960 N N N N
4961 N N N N
4962 N N N N
4958 N N N N
4959 N N N N
4964 N N N N
4965 N Y N N
4966 N N N N
4967 N N N N
4968 N N N N
4969 N N N N
4970 N N N N
4971 N N N N
6211 N N N N
6213 N N N N
6214 N N N N
6215 N N N N
6216 N N N N
6218 N N N N
6222 N N N N
6269 N N N N
6314 N N N N
6313 N N N N
6377 N N N N
Alternative and maintenance service
Alternative service charges
Annual minimum maintenance charges
IBM Global Financing: IBM Global Financing offers competitive financing to credit-qualified customers to assist them in acquiring IT solutions. Our offerings include financing for IT acquisition, including hardware, software, and services, both from IBM and other manufacturers or vendors. Offerings (for all customer segments: small, medium, and large enterprise), rates, terms, and availability can vary by country. Contact your local IBM Global Financing organization or visit the Web at
IBM Global Financing offerings are provided through IBM Credit LLC in the United States and other IBM subsidiaries and divisions worldwide to qualified commercial and government customers. Rates are based on a customer's credit rating, financing terms, offering type, equipment type, and options, and may vary by country. Other restrictions may apply. Rates and offerings are subject to change, extension, or withdrawal without notice. Financing solutions from IBM Global Financing can help you stretch your budget and affordably acquire the new product. But beyond the initial acquisition, our end-to-end approach to IT management can also help keep your technologies current, reduce costs, minimize risk, and preserve your ability to make flexible equipment decisions throughout the entire technology life cycle. For more financing information, visit
Trademarks
Back to top
Printable version