IBM System Storage N5200 adds software features
IBM United States Hardware Announcement 106-205February 28, 2006
 ENUS106-205.PDF (69KB)
|
At a glance
 |
| At a glance |
 |
The IBM System Storage N5200 has new features providing additional function and a broader array of licensed function.
- Partially populated expansion units
- SnapManager for SQL
- SnapManager for Exchange
- SnapDrive for HP-UX and Solaris
- Single Mailbox Recovery (SMBR)
- Fiber Channel host attach kits for HP-UX and Solaris
For ordering, contact:
Your IBM representative, an IBM Business Partner, or IBM Americas Call Centers at
800-IBM-CALL
(Reference: YE001).
Back to top
|
|
| Overview |
|
The N5200 adds features that are designed to help complete the N5200 portfolio and to add function. These features include:
- Partially populated expansion units — supports attachment of EXN1000 and EXN2000 expansion units that are not fully populated
- SnapManager for SQL — adds SnapManager support for Microsoft™ SQL servers
- SnapManager for Exchange — adds SnapManager support for Microsoft Exchange servers
- Single Mailbox Recovery (SMBR) — adds advanced function to the SnapManager for Exchange feature
- Fibre Channel host attach kits — are designed to improve host-side Fibre Channel attachment to HP-UX and Solaris hosts
Back to top
|
|
| Key prerequisites |
|
The IBM System Storage™ N5200 requires FC, NFS, CIFS, or iSCSI protocol function on the host N5200
filers.
Back to top
|
|
| Planned availability dates |
|
- March 17, 2006, except for support of fewer than 14 drives in expansion units, SnapManager for Exchange, and Single Mailbox Recovery
- April 7, 2006, for fewer than 14 drives in expansion units
- April 21, 2006, for SnapManager for Exchange and Single Mailbox Recovery
Back to top
|
|
| Description |
|
The N5200 filers now support attachment of EXN1000 and EXN2000 expansion units with configurations of fewer than 14 disk drives. The initial order for an N5200 and any expansion unit must include no more than two drive types (rotational speed, capacity, and drive interface [FC or SATA]) to be attached to the N5200 filer. Additional drive types may be added later, to an installed N5200 system, resulting in more than two types on the system.
All of the licensed functions necessary to support the Fibre Channel Protocol (FCP) on HP-UX and Solaris are also now supported for the N5200. These include SnapDrive for HP-UX and Solaris. All necessary host attach kits for these platforms are also available.
Other licensed functions for the N5200 include Disk Sanitization, SnapManager for SQL, SnapManager for Exchange, and Single Mailbox Recovery (SMBR).
Disk Sanitization, a no-cost, licensed solution, is designed to allow physical removal of all data on one, or more, physical disk drives in a manner that prevents recovery of that data by known recovery methods.
SnapManager for SQL is designed to help reduce backup and restore times of SQL databases by using backups based upon snapshot copies. It is designed to allow simultaneous backup of multiple databases, using minimal disk space for each additional full backup.
SnapManager for Exchange is designed to help streamline storage management while simplifying configuration, backup, and restore operations for Microsoft Exchange databases.
Single Mailbox Recovery is designed to work with SnapManager for Exchange and restore individual mail items from any recent (hourly, daily, or weekly) snapshot. This helps allow rapid search of archived snapshot copies of previously deleted messages that are no longer in the current mailbox. Single Mailbox Recovery also includes Extract Wizards for Microsoft NT Backup, VERITAS Backup Exec, and, optionally, Extract Wizards for CA BrightStor ARCserve, Legato NetWorker, and VERITAS Net Backup. The Extract Wizards are designed to restore both private and public exchange information and stored data from tape or disk backups to any alternate location (machine, volume, or folder), thereby, helping eliminate the need for a recovery server.
Section 508 of the U.S. Rehabilitation Act
The IBM System Storage N5200 is capable, as of March 17, 2006, when used in accordance with IBM's associated documentation, of satisfying the applicable requirements of Section 508 of the Rehabilitation Act, provided that any assistive technology used with the product properly interoperates with it. A U.S. Section 508 Voluntary Product Accessibility Template (VPAT) can be requested via IBM's Web site at
Back to top
|
|
| Reference information |
|
Refer to:
- Hardware Announcement 105-463 , dated November 8, 2005, IBM System Storage N5200 offers midrange Network Attached Storage
- Hardware Announcement 105-460 , dated November 8, 2005, IBM System Storage N series function authorizations establish authorization for use of licensed functions on IBM TotalStorage® N series machines
- Hardware Announcement 106-202 , dated February 28, 2006, IBM System Storage N series function authorization
Business Partner information
If you are a Direct Reseller - System Reseller acquiring products from IBM, you may link directly to Business Partner information for this announcement. A PartnerWorld ID and password are required (use IBM ID).
BP Attachment for Announcement Letter 106-205
Trademarks
Back to top
|
|
| Feature descriptions |
|
Licensed function features
Licensed functions are authorized at the 2864 system level. Only one feature is required per 2864 system, regardless of the physical capacity within the 2864 system or the number of attached expansion units.
The following additional licensed functions are available on the N5200 Models A10 and A20 as optional features.
Model Model A10 A20 feature feature Description 7218 7270 Disk Sanitization 7219 7271 SnapManager/Exchange -- Filer 7220 7272 SnapManager/SQL -- Filer 8000 8000 SnapDrive -- AIX(R) 1-2 Procs 8001 8001 SnapDrive -- AIX 3-4 Procs 8002 8002 SnapDrive -- AIX 5-8 Procs 8003 8003 SnapDrive -- AIX 9+ Procs 8004 8004 SnapDrive -- HP-UX 1-2 Procs 8005 8005 SnapDrive -- HP-UX 3-4 Procs 8006 8006 SnapDrive -- HP-UX 5-8 Procs 8007 8007 SnapDrive -- HP-UX 9+ Procs 8008 8008 SnapDrive -- Solaris 1-2 Proc 8009 8009 SnapDrive -- Solaris 3-4 Proc 8010 8010 SnapDrive -- Solaris 5-8 Proc 8011 8011 SnapDrive -- Solaris 9+ Procs 8020 8020 SnapDrive -- Linux(TM) 1-2 Procs 8021 8021 SnapDrive -- Linux 3-4 Procs 8022 8022 SnapDrive -- Linux 5-8 Procs 8023 8023 SnapDrive -- Linux 9+ Procs 8040 8040 SnapDrive for UNIX(R) Media Kit 8121 8121 FCP Host Attach Kit -- HP-UX 8122 8122 FCP Host Atch Kit -- Solaris 8131 8131 SnapManager/Exchange -- Host 8132 8132 SnapManager/Exch -- Media Kit 8141 8141 SnapManager for SQL -- Host 8142 8142 SnapManager/SQL -- Media Kit 8150 8150 Single Mbox Recovery 100 pk 8151 8151 Single Mbox Recovery 500 pk 8152 8152 Single Mbox Recovery 1,000 pk 8153 8153 Single Mbox Recovery 2,500 pk 8154 8154 Single Mbox Recovery 5K pk 8155 8155 Single Mbox Recovery 10K pk 8156 8156 Single Mbox Recovery 50K pk 8157 8157 Single Mbox Recovery Med Kt 8158 8158 SMBR CA-ARCSERVE Extract Wiz 8159 8159 SMBR Tivoli(R) Tape Extract Wiz 8160 8160 SMBR Legato Tape Extract Wiz 8161 8161 SMBR NetBackup Extract Wiz 8162 8162 SMBR PST Tape Extract Wiz 8163 8163 SMBR HP Extract Wiz
Licensed function indicators
(#7218 and #7270) Disk Sanitization: This feature enables the Disk Sanitization licensed function subject to the client applying a feature activation code made available by IBM. This feature is also used for maintenance billing purposes.
The corequisite IBM 2870 feature number must be purchased to establish authorization for use of the Disk Sanitization licensed function before the feature activation code is provided by IBM.
(#7219 and #7271) SnapManager/Exchange — Filer: This feature enables the SnapManager/Exchange — Filer licensed function subject to the client applying a feature activation code made available by IBM. This feature is also used for maintenance billing purposes.
This feature allows connection of any number of exchange servers to a filer.
The corequisite IBM 2870 feature number must be purchased to establish authorization for use of the SnapManager/Exchange — Filer licensed function before the feature activation code is provided by IBM.
(#7220 and #7272) SnapManager/SQL — Filer: This feature enables the SnapManager/SQL — Filer licensed function subject to the client applying a feature activation code made available by IBM. This feature is also used for maintenance billing purposes.
This feature allows connection of any number of exchange servers to a filer.
The corequisite IBM 2870 feature number must be purchased to establish authorization for use of the SnapManager/SQL — Filer licensed function before the feature activation code is provided by IBM.
Host software
SnapDrive for AIX
These features provide a software application designed to enhance the storage management capabilities in an AIX environment, including easier management of dynamic volume management, cluster management, snapshot management, and replication management. One feature must be ordered for each host on which it will be installed.
Note: Use of these features with FCP attachment requires the FCP Protocol (#7217 or #7269) on the N5200, as well as the corequisites, feature numbers 8110 and 8119.
Note: If running with iSCSI, the iSCSI Host Support Kit is required. The iSCSI Host Support Kit is available for download from
(#8000) SnapDrive — AIX 1-2 Procs: This feature enables SnapDrive for AIX support for a single host with 1 or 2 processors.
(#8001) SnapDrive — AIX 3-4 Procs: This feature enables SnapDrive for AIX support for a single host with 3 or 4 processors.
(#8002) SnapDrive — AIX 5-8 Procs: This feature enables SnapDrive for AIX support for a single host with 5, 6, 7 or 8 processors.
(#8003) SnapDrive — AIX 9+ Procs: This feature enables SnapDrive for AIX support for a single host with 9 or more processors.
SnapDrive for HP-UX
These features provide a software application designed to enhance the storage management capabilities in an HP-UX environment, including easier management of dynamic volume management, cluster management, snapshot management, and replication management. One feature must be ordered for each host on which it will be installed.
Note: Use of these features with FCP attachment requires the FCP Protocol (#7217 or #7269) on the N5200, as well as the corequisite, feature number 8121.
Note: If running with iSCSI, the iSCSI Host Support Kit is required. The iSCSI Host Support Kit is available for download from
(#8004) SnapDrive — HP-UX 1-2 Procs: This feature enables SnapDrive for HP-UX support for a single host with 1 or 2 processors.
(#8005) SnapDrive — HP-UX 3-4 Procs: This feature enables SnapDrive for HP-UX support for a single host with 3 or 4 processors.
(#8006) SnapDrive — HP-UX 5-8 Procs: This feature enables SnapDrive for HP-UX support for a single host with 5 to 8 processors.
(#8007) SnapDrive — HP-UX 9+ Procs: This feature enables SnapDrive for HP-UX support for a single host with 9 or more processors.
SnapDrive for Solaris
These features provide a software application designed to enhance the storage management capabilities in a Solaris environment, including easier management of dynamic volume management, cluster management, snapshot management, and replication management. One feature must be ordered for each host on which it will be installed.
Note: Use of these features with FCP attachment requires the FCP Protocol (#7217 or #7269) on the N5200, as well as the corequisite, feature number 8122.
Note: If running with iSCSI, the iSCSI Host Support Kit is required. The iSCSI Host Support Kit is available for download from
(#8008) SnapDrive — Solaris 1-2 Proc: This feature enables SnapDrive for Solaris support for a single host with 1 or 2 processors.
(#8009) SnapDrive — Solaris 3-4 Proc: This feature enables SnapDrive for Solaris support for a single host with 3 or 4 processors.
(#8010) SnapDrive — Solaris 5-8 Proc: This feature enables SnapDrive for Solaris support for a single host with 5 to 8 processors.
(#8011) SnapDrive — Solaris 9+ Procs: This feature enables SnapDrive for Solaris support for a single host with 9 or more processors.
SnapDrive for Linux
These features provide a software application designed to enhance the storage management capabilities in an Linux environment, including easier management of dynamic volume management, cluster management, snapshot management, and replication management. One feature must be ordered for each host on which it will be installed.
These features are supported only for iSCSI; they are not supported for Fibre Channel Protocol. iSCSI Host Support Kits must be installed on the N5200. The iSCSI Host Support Kit is available for download from
(#8020) SnapDrive — Linux 1-2 Procs: This feature enables SnapDrive for Linux support for a single host with 1 or 2 processors.
(#8021) SnapDrive — Linux 3-4 Procs: This feature enables SnapDrive for Linux support for a single host with 3 or 4 processors.
(#8022) SnapDrive — Linux 5-8 Procs: This feature enables SnapDrive for Linux support for a single host with 5 to 8 processors.
(#8023) SnapDrive — Linux 9+ Procs: This feature enables SnapDrive for Linux support for a single host with 9 or more processors.
(#8040) SnapDrive for UNIX Media Kit: This feature provides a physical media kit that includes SnapDrive for Linux, Solaris, AIX and HP-UX.
(#8121) FCP Host Atch Kit — HP-UX: These features provide a software application designed to enhance the storage management capabilities in an HP-UX environment, including easier management of dynamic volume management, cluster management, snapshot management, and replication management. One feature must be ordered for each host on which it will be installed.
(#8122) FCP Host Atch Kit — Solaris: These features provide a software application designed to enhance the storage management capabilities in a Solaris environment, including easier management of dynamic volume management, cluster management, snapshot management, and replication management. One feature must be ordered for each host on which it will be installed.
(#8131) SnapManager/Exchange — Host: This feature allows connection of one exchange host server to a filer. One of this feature is required for each exchange host. The Fibre Channel Protocol feature or iSCSI must be installed on the attached filer.
(#8132) SnapManager/Exch — Media Kit: This feature provides the physical media kit for SnapManager for Exchange. Only one media kit is needed for a single SnapManager for Exchange — filer or host license. Customers may order more than one, but a single media kit may be installed on multiple hosts or filers.
(#8141) SnapManager for SQL — Host: This feature allows connection of one exchange host server to a filer. One of this feature is required for each SQL host. The Fibre Channel Protocol feature or iSCSI must be installed on the attached filer.
(#8142) SnapManager/SQL — Media Kit: This feature provides the physical media kit for SnapManager for SQL. Only one media kit is needed for a single SnapManager for SQL — filer or host license. Customers may order more than one, but a single media kit is may be installed on multiple hosts or filers.
Single Mailbox Recovery
Single Mail Box Recovery for Microsoft™ Exchange (SMBR) software can help provide rapid recovery of single mail boxes, individual folders, or single messages from a valid SnapManager backup to the production Exchange server, to any offline Exchange server, or an Outlook .pst file. The software can help save time and money by avoiding the need for cumbersome and disk-intensive brick level backups or investments in a dedicated recovery server infrastructure.
(#8150) Single Mbox Recovery 100 pk: This feature provides support for 100 mailboxes.
(#8151) Single Mbox Recovery 500 pk: This feature provides support for 500 mailboxes.
(#8152) Single Mbox Recovery 1000 pk: This feature provides support for 1,000 mailboxes.
(#8153) Single Mbox Recovery 2500 pk: This feature provides support for 2,500 mailboxes.
(#8154) Single Mbox Recovery 5K pk: This feature provides support for 5,000 mailboxes.
(#8155) Single Mbox Recovery 10K pk: This feature provides support for 10,000 mailboxes.
(#8156) Single Mbox Recovery 50K pk: This feature provides support for 50,000 mailboxes.
(#8157) Single Mbox Recovery Med Kt: This feature provides the physical media kit for Single Mailbox Recovery. Only one media kit is needed for a single Single Mailbox Recovery license. Customers may order more than one, but a single media kit may be installed on multiple Exchange Hosts.
(#8158) SMBR CA-ARCSERVE Extract Wiz: The CA-ARCSERVE Extract Wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server.
(#8159) SMBR Tivoli Tape Extract Wiz: The Tivoli extract wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server.
(#8160) SMBR Legato Tape Extract Wiz: The Legato extract wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server.
(#8161) SMBR NetBackup Extract Wiz: The NetBackup extract wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server.
(#8162) SMBR PST Tape Extract Wiz: The PST extract wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server.
(#8163) SMBR HP Extract Wiz: The HP extract wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server.
Configuration specify features
Features #9557, #9558, and #9559 must be specified to verify that sufficient Fibre Channel ports (and sufficient FC HBA for Disk, Dual-port adapters, #1004) are included in the initial order for an N5200 filer.
For an N5200 Model A10, the maximum number of feature #9557 that may be specified is four and the total of features #9558 and #9559 may not exceed four.
For an N5200 Model A20, the maximum number of feature #9557 that may be specified is eight and the total of features #9558 and #9559 may not exceed eight.
(#9557) Number of FC Target Ports: This no-charge feature specifies the number of onboard Fibre Channel ports that are to be configured as FCP target ports. FCP target ports are used for Fibre Channel attachment of the N5200 to application servers (containing Fibre Channel HBAs) or to Fibre Channel storage area networks.
This feature is only relevant if you intend to use the Fibre Channel Protocol feature on the N5200. For an N5200 Model A10, valid choices are 0, 2, and 4. For a Model A20, valid choices are 0, 4, and 8.
(#9558) Number of FC Storage Loops: This no-charge feature specifies, on the initial order of an N5200 filer, the number of dual-path Fibre Channel storage loops that are to be configured for the attachment of EXN2000 storage expansion units. The EXN2000 expansion units, included in the initial order, will be distributed across the specified number of storage loops.
(#9559) Number of SATA Storage Loops:
This no-charge feature specifies, on the initial order of an N5200
filer, the number of dual-path Fibre Channel storage loops that are to be
configured for the attachment of EXN1000 SATA storage expansion units.
The EXN1000 expansion units, included in the initial order, will be
distributed across the specified number of storage loops.
Back to top
|
|
| Publications |
|
The following publications are shipped with the product. Additional copies will be available immediately.
Order
Title number
Shipped in hardcopy:
IBM System Storage(TM) N5200 and GC26-7784
N5500 Installation and Setup
Instructions
IBM System Storage N5200 and GC26-7785
N5500 Hardware and Service
Guide
MES/FRU Flyer NA
WEEE Flyer NA
IBM Warranty Flyer NA
IBM Statement of Limited Warranty NA
IBM Translated Safety Notices GA27-4338
On the Web, all above, and:
IBM System Storage N series GA32-0529
Software Setup Guide
IBM System Storage N series GC26-7787
Error Messages and
Troubleshooting Guide
IBM System Storage N series GC26-7791
Software Upgrade Guide
IBM System Storage N series GA32-0543
Introduction and Planning Guide
IBM System Storage N series
Release Notes 7.1
IBM System Storage File Access GA32-0520
and Protocols Management Guide
IBM System Storage N series GC26-7789
Diagnostics Guide
IBM System Storage N series GA32-0521
Storage Management Guide
IBM System Storage N series Data GA32-0522
Protection Online Backup and
Recovery Guide
IBM System Storage N series Data GA32-0523
Protection Tape Backup and
Recovery Guide
IBM System Storage N series GA32-0524
MultiStore Management Guide
IBM System Storage N series GA32-0525
Network Management Guide
IBM System Storage N series GA32-0526
Commands: Manual Page
Reference, Volume 1
IBM System Storage N series GA32-0527
Commands: Manual Page
Reference, Volume 2
IBM System Storage N series Block GC26-7863
Access Management Guide for
iSCSI and FCP
IBM System Storage N series GA32-0529
System Administration Guide
IBM System Storage iSCSI SuSE GA32-0532
Linux Initiator Support Kit
1.3 Setup Guide
IBM System Storage iSCSI SuSE GA32-0533
Linux Initiator Support Kit
1.2 Release Notes
IBM System Storage SuSE Enterprise NA
Linux iSCSI Commands for Support
Kit 1.3 Quick Reference
IBM System Storage N series iSCSI
Novell NetWare Initiator Support
Kit 1.0 Setup and Configuration
Guide
IBM System Storage iSCSI Red Hat GA32-0536
Linux Initiator Support Kit
1.2 Setup Guide
IBM System Storage Red Hat Linux NA
iSCSI Commands for Support Kit
1.2 Quick Reference
IBM System Storage iSCSI Red Hat GA32-0538
Linux Support Kit 1.2 Release
Notes
IBM System Storage MicroSoft Windows(TM) NA
iSCSI Commands for Support Kit
2.0 Quick Reference
IBM System Storage N series iSCSI GA32-7779
Microsoft Windows Initiator
Support Kit 2.0 Release Notes
IBM System Storage N series iSCSI GA32-0529
Microsoft Windows Initiator
Support Kit 2.0 Setup Guide
IBM System Storage iSCSI HP-UX GC26-7864
Quick Reference Commands
IBM System Storage iSCSI HP-UX GC26-7865
Support Kit Setup Guide
IBM System Storage iSCSI HP-UX GC26-7866
Support Kit 1.2 Release Notes
IBM System Storage iSCSI Solaris GC26-7867
Quick Reference Commands
IBM System Storage iSCSI Solaris GC26-7868
Support Kit Setup Guide
IBM System Storage iSCSI Solaris GC26-7869
Support Kit 1.2 Release Notes
IBM System Storage SnapDrive for GC26-7877
UNIX 2.1 Release Notes
IBM System Storage SnapDrive for GC26-7878
UNIX 2.1 Installation and
Administration Guide (IBM AIX,
HP-UX, Solaris, Linux)
IBM System Storage SnapDrive for GC26-7879
UNIX 2.1 Quick Start Guide
IBM System Storage SnapDrive for GC26-7880
Windows 4.1 Installation and
Administration Guide
IBM System Storage SnapDrive for GC26-7881
Windows 4.1 Release Notes
IBM System Storage SnapManager GC26-7882
2.0 for Microsoft SQL Server
Installation and Administration
Guide
IBM System Storage SnapManager GC26-7883
3.2 for Microsoft Exchange
Release Notes
IBM System Storage SnapManager GC26-7884
3.2 for Microsoft Exchange
Installation and Administration
Guide
IBM System Storage Single Mailbox GC26-7885
Recovery 3.1 Administrator's
Guide
IBM System Storage OSSV 2.2 GC26-7887
Installation and Administration
Guide
IBM System Storage OSSV 2.2 GC26-7888
Release Notes
NA = Not applicable
All publications are available to be ordered. To order, contact your IBM representative.
The Publication Notification System (PNS) is available by order number/ product number. Customers currently subscribing to PNS will automatically receive notifications by e-mail. Customers who want to subscribe can visit the PNS Web site location at
The publications listed on the notification can be ordered by calling the Pubs Support Group in Raleigh at 800-879-2755, option 1.
The IBM Publications Center Portal
The Publications Center is a worldwide central repository for IBM product publications and marketing material with a catalog of 70,000 items. Extensive search facilities are provided, as well as payment options via credit card. A large number of publications are available online in various file formats, which can currently be downloaded free of charge.
Note that PNS subscribers most often order their publications via the Publication Center.
Displayable softcopy publications
The product books are offered in displayable softcopy form. The files are available from the Web at
The N5200 Quick Reference card is only available as hardcopy.
Back to top
|
|
| Services |
|
IBM Integrated Technology Services
IBM services include business consulting, outsourcing, hosting services, applications, and other technology management.
These services help you learn about, plan, install, manage, or optimize your IT infrastructure to be an On Demand Business. They can help you integrate your high-speed networks, storage systems, application servers, wireless protocols, and an array of platforms, middleware, and communications software for IBM and many non-IBM offerings. IBM is your one-stop shop for IT support needs.
For details on available services, contact your IBM representative or visit
For details on available IBM Business Continuity and Recovery Services, contact your IBM representative or visit
For details on education offerings related to specific products, visit
Select your country, and then select the product as the category.
Back to top
|
|
| Technical information |
|
Specified operating environment
Physical specifications
IBM System Storage N5200
- Width: 449 mm (17.7 in)
- Depth: 518 mm (24.3 in)
- Height: 130 mm (5.13 in)
- Weight: 34.0 kg (75.0 lb)
To assure installability and serviceability in non-IBM industry standard racks, review the installation planning information for any product specific installation requirements.
Standards
Safety
- EN 60950: 2000
- CE Mark (EU)
- UL60950-2000
- CSA 60950-00
- CB IEC 60950 Ed.3 (worldwide)
- EN60825-1: 1994+A11
- IRAM
- GOST-R
EMC
- FCC Class A
- EN55022: 1998
- EN61000-3-2
- EN61000-3-3
- CE
- ACA C-Tick
- VCCI
Immunity
EN55024: 1998
Operating environment
-
Temperature:
- Maximum range: 10° to 40°C (50° to 104°F)
- Recommended: 20° to 25°C (68° to 77°F)
- Non-operating: -40° to 65°C (-40° to 149°F)
-
Relative humidity:
- Recommended operating range: 40% to 55%
- Maximum wet bulb: 28°C
- Maximum altitude: 3,050 m (10,000 ft.)
Note: Operating at extremes of environment may increase risk of failure.
- Relative humidity: 10 to 90 (percent, non-condensing)
- Wet bulb (caloric value): 1,215 Btu/hr (fully loaded shelf)
- Maximum electrical power: 100-240 V ac, 10-5A, 47-63 Hz
- Nominal electrical power: 100 to 120 V ac, 4 A; 200 to 240 V ac, 2 A
-
Noise level:
- 49 dBa @ 1 m @ 23°C
- 5 bels @ 1 m @ 23°C
Hardware requirements
Licensed Machine Code (LMC)
The N5200 requires LMC level 7.1.0, or later. Some N5200 features and functions may not be available or supported in all environments. Current information on supported environments, prerequisites, and minimum operating systems levels is available at
Current license terms for the machine code provided with this product prohibit transfer of the machine code without approval from Network Appliance.
Licensed functions
The following licensed function is required on the N5200:
- DataONTAP (feature number 7200 or 7250)
Licensed functions require the selection of N5200 Model A10 or A20 features and the acquisition of the corresponding IBM 2870 Model 641 or 642 function authorization features.
Software requirements
Current information on servers, operating systems, host adapters, and connectivity products supported by the N5200 is available at
Limitations
- The N5200 is supported only in rack installations.
- This product is functional with the iSeries™ and OpenPower™ platforms. However, on the iSeries, support is only available on Power Linux and AIX partitions, not i5/OS™.
- Current license terms for the machine code provided with this product prohibit transfer of the machine code without approval from Network Appliance.
Planning information
Customer responsibilities: Following good safety practice, IBM recommends that three or more persons install this product.
Physical configuration and installation planning for the 2864 is a customer responsibility. Information about physical configuration and installation requirements, including equipment, site, and power requirements, can be found in the IBM System Storage N5200 and N5500 Installation and Setup Instructions (GC26-7784).
A customer-supplied Ethernet cable is required to connect the machine to a server or Ethernet network.
Cable orders: Fibre Channel cables are required to connect an expansion unit to a 2864 system. Cables can be purchased using expansion unit features.
For the two-node Model A20, cluster cables are required to connect the nodes.
Installability: Estimated time to unpack an IBM System Storage N5200, install it in the rack, and perform a simple discovery and configuration is two hours.
Security, auditability, and control
This product uses the security and auditability features of host hardware, host software, and/or application software to which it is attached.
The customer is responsible for evaluation, selection, and implementation of security features,
administrative procedures, and appropriate controls in application systems and communications
facilities.
Back to top
|
|
| Terms and conditions |
|
MES discount applicable: Equal to the volume commitment discount
Field installable feature: Yes
Warranty period: Three years
Customer setup: Yes
Machine code:
Same license terms and conditions as base machine
Back to top
|
|
| Prices |
|
The prices provided in this announcement are suggested retail prices for the U.S. only and are provided for your information only. Dealer prices may vary, and prices may also vary by country. Prices are subject to change without notice. For additional information and current prices, contact your local IBM representative.
Machine Feature Purchase
Description type Model number price
Licensed Function Indicators
Disk Sanitization 2864 A10 7218 $ 0
SnapManager/Exchange -- Filer 2864 A10 7219 0
SnapManager/SQL -- Filer 2864 A10 7220 0
Disk Sanitization 2864 A20 7270 0
SnapManager/Exchange -- Filer 2864 A20 7271 0
SnapManager/SQL -- Filer 2864 A20 7272 0
SnapDrive -- AIX 1-2 Procs 2864 A10, A20 8000 0
SnapDrive -- AIX 3-4 Procs 2864 A10, A20 8001 0
SnapDrive -- AIX 5-8 Procs 2864 A10, A20 8002 0
SnapDrive -- AIX 9+ Procs 2864 A10, A20 8003 0
SnapDrive -- HP-UX 1-2 Procs 2864 A10, A20 8004 0
SnapDrive -- HP-UX 3-4 Procs 2864 A10, A20 8005 0
SnapDrive -- HP-UX 5-8 Procs 2864 A10, A20 8006 0
SnapDrive -- HP-UX 9+ Procs 2864 A10, A20 8007 0
SnapDrive -- Solaris 1-2 Proc 2864 A10, A20 8008 0
SnapDrive -- Solaris 3-4 Proc 2864 A10, A20 8009 0
SnapDrive -- Solaris 5-8 Proc 2864 A10, A20 8010 0
SnapDrive -- Solaris 9+ Procs 2864 A10, A20 8011 0
SnapDrive -- Linux 1-2 Procs 2864 A10, A20 8020 0
SnapDrive -- Linux 3-4 Procs 2864 A10, A20 8021 0
SnapDrive -- Linux 5-8 Procs 2864 A10, A20 8022 0
SnapDrive -- Linux 9+ Procs 2864 A10, A20 8023 0
SnapDrive for UNIX Media Kit 2864 A10, A20 8040 0
FCP Host Attach Kit -- HP-UX 2864 A10, A20 8121 0
FCP Host Atch Kit -- Solaris 2864 A10, A20 8122 0
SnapManager/Exchange -- Host 2864 A10, A20 8131 0
SnapManager/Exch -- Media Kit 2864 A10, A20 8132 0
SnapManager/SQL -- Host 2864 A10, A20 8141 0
SnapManager/SQL -- Media Kit 2864 A10, A20 8142 0
Single Mbox Recovery 100 pk 2864 A10, A20 8150 0
Single Mbox Recovery 500 pk 2864 A10, A20 8151 0
Single Mbox Recovery 1000 pk 2864 A10, A20 8152 0
Single Mbox Recovery 2500 pk 2864 A10, A20 8153 0
Single Mbox Recovery 5K pk 2864 A10, A20 8154 0
Single Mbox Recovery 10K pk 2864 A10, A20 8155 0
Single Mbox Recovery 50K pk 2864 A10, A20 8156 0
Single Mbox Recovery Med Kt 2864 A10, A20 8157 0
SMBR CA-ARCSERVE Extract Wiz 2864 A10, A20 8158 0
SMBR Tivoli Tape Extract Wiz 2864 A10, A20 8159 0
SMBR Legato Tape Extract Wiz 2864 A10, A20 8160 0
SMBR NetBackup Extract Wiz 2864 A10, A20 8161 0
SMBR PST Tape Extract Wiz 2864 A10, A20 8162 0
SMBR HP Extract Wiz 2864 A10, A20 8163 0
Power Cord, Taiwan 250V 2864 A10, A20 9016 0
Num. of FC Target Ports 2864 A10, A20 9557 NC
Num. of FC Storage Loops 2864 A10, A20 9558 NC
Num. of SATA Storage Loops 2864 A10, A20 9559 NC
NC = No charge
Machine
type/model/ Plant/
feature Field MES Cabl
Description number install removal req. CSU(1)
Disk Sanitization 2864/A10/7318 Both(2) N N Y
SnapManager/ 2864/A10/7319 Both(2) N N Y
Exchange --
Filer
SnapManager/ 2864/A10/7220 Both(2) N N Y
SQL -- Filer
SnapDrive -- 2864/A10/8000 Both N N Y
AIX 1-2
Procs
SnapDrive -- 2864/A10/8001 Both N N Y
AIX 3-4
Procs
SnapDrive -- 2864/A10/8002 Both N N Y
AIX 5-8
Procs
SnapDrive -- 2864/A10/8003 Both N N Y
AIX 9+
Procs
SnapDrive -- 2864/A10/8004 Both N N Y
HP-UX 1-2
Procs
SnapDrive -- 2864/A10/8005 Both N N Y
HP-UX 3-4
Procs
SnapDrive -- 2864/A10/8006 Both N N Y
HP-UX 5-8
Procs
SnapDrive -- 2864/A10/8007 Both N N Y
HP-UX 9+
Procs
SnapDrive -- 2864/A10/8008 Both N N Y
Solaris 1-2
Proc
SnapDrive -- 2864/A10/8009 Both N N Y
Solaris 3-4
Proc
SnapDrive -- 2864/A10/8010 Both N N Y
Solaris 5-8
Proc
SnapDrive -- 2864/A10/8011 Both N N Y
Solaris 9+
Procs
SnapDrive -- 2864/A10/8020 Both N N Y
Linux 1-2
Procs
SnapDrive -- 2864/A10/8021 Both N N Y
Linux 3-4
Procs
SnapDrive -- 2864/A10/8022 Both N N Y
Linux 5-8
Procs
SnapDrive -- 2864/A10/8023 Both N N Y
Linux 9+
Procs
SnapDrive for 2864/A10/8040 Both N N Y
UNIX Media
Kit
FCP Host Attach 2864/A10/8121 Both N N Y
Kit --
HPUX
FCP Host Atch 2864/A10/8122 Both N N Y
Kit --
Solaris
SnapManager/ 2864/A10/8131 Both N N Y
Exchange --
Host
SnapManager/ 2864/A10/8132 Both N N Y
Exch --
Media Kit
SnapManager for 2864/A10/8141 Both N N Y
SQL --
Host
SnapManager/ 2864/A10/8142 Both N N Y
SQL --
Media Kit
Single Mbox 2864/A10/8150 Both N N Y
Recovery
100 pk
Single Mbox 2864/A10/8151 Both N N Y
Recovery
500 pk
Single Mbox 2864/A10/8152 Both N N Y
Recovery
1000 pk
Single Mbox 2864/A10/8153 Both N N Y
Recovery
2500 pk
Single Mbox 2864/A10/8154 Both N N Y
Recovery
5K pk
Single Mbox 2864/A10/8155 Both N N Y
Recovery
10K pk
Single Mbox 2864/A10/8156 Both N N Y
Recovery
50K pk
Single Mbox 2864/A10/8157 Both N N Y
Recovery
Med Kt
SMBR CA-ARCSERVE 2864/A10/8158 Both N N Y
Extract
Wiz
SMBR Tivoli 2864/A10/8159 Both N N Y
Tape Extract
Wiz
SMBR Legato 2864/A10/8160 Both N N Y
Tape Extract
Wiz
SMBR NetBackup 2864/A10/8161 Both N N Y
Extract Wiz
SMBR PST Tape 2864/A10/8162 Both N N Y
Extract Wiz
SMBR HP Extract 2864/A10/8163 Both N N Y
Wiz
Power Cord, 2864/A10/9016 Plant N N Y
Taiwan 250V
Num. of FC 2864/A10/9557 Plant N N Y
Target
Ports
Num. of FC 2864/A10/9558 Plant N N Y
Storage
Loops
Num. of SATA 2864/A10/9559 Plant N N Y
Storage
Loops
Disk Sanitization 2864/A20/7270 Both Y N Y
SnapManager/ 2864/A20/7271 Both Y N Y
Exchange --
Filer
SnapManager/ 2864/A20/7272 Both Y N Y
SQL --
Filer
SnapDrive -- 2864/A20/8000 Both N N Y
AIX 1-2
Procs
SnapDrive -- 2864/A20/8001 Both N N Y
AIX 3-4
Procs
SnapDrive -- 2864/A20/8002 Both N N Y
AIX 5-8
Procs
SnapDrive -- 2864/A20/8003 Both N N Y
AIX 9+ Procs
SnapDrive -- 2864/A20/8004 Both N N Y
HP-UX 1-2
Procs
SnapDrive -- 2864/A20/8005 Both N N Y
HP-UX 3-4
Procs
SnapDrive -- 2864/A20/8006 Both N N Y
HP-UX 5-8
Procs
SnapDrive -- 2864/A20/8007 Both N N Y
HP-UX 9+
Procs
SnapDrive -- 2864/A20/8008 Both N N Y
Solaris 1-2
Proc
SnapDrive -- 2864/A20/8009 Both N N Y
Solaris 3-4
Proc
SnapDrive -- 2864/A20/8010 Both N N Y
Solaris 5-8
Proc
SnapDrive -- 2864/A20/8011 Both N N Y
Solaris 9+
Procs
SnapDrive -- 2864/A20/8020 Both N N Y
Linux 1-2
Procs
SnapDrive -- 2864/A20/8021 Both N N Y
Linux 3-4
Procs
SnapDrive -- 2864/A20/8022 Both N N Y
Linux 5-8
Procs
SnapDrive -- 2864/A20/8023 Both N N Y
Linux 9+
Procs
SnapDrive for 2864/A20/8040 Both N N Y
UNIX Media
Kit
FCP Host Attach 2864/A20/8121 Both N N Y
Kit --
HP-UX
FCP Host Atch 2864/A20/8122 Both N N Y
Kit --
Solaris
SnapManager/ 2864/A20/8131 Both N N Y
Exchange --
Host
SnapManager/ 2864/A20/8132 Both N N Y
Exch --
Media Kit
SnapManager for 2864/A20/8141 Both N N Y
SQL --
Host
SnapManager/ 2864/A20/8142 Both N N Y
SQL --
Media Kit
Single Mbox 2864/A20/8150 Both N N Y
Recovery
100 pk
Single Mbox 2864/A20/8151 Both N N Y
Recovery
500 pk
Single Mbox 2864/A20/8152 Both N N Y
Recovery
1000 pk
Single Mbox 2864/A20/8153 Both N N Y
Recovery
2500 pk
Single Mbox 2864/A20/8154 Both N N Y
Recovery
5K pk
Single Mbox 2864/A20/8155 Both N N Y
Recovery
10K pk
Single Mbox 2864/A20/8156 Both N N Y
Recovery
50K pk
Single Mbox 2864/A20/8157 Both N N Y
Recovery
Med Kt
SMBR CA-ARCSERVE 2864/A20/8158 Both N N Y
Extract
Wiz
SMBR Tivoli 2864/A20/8159 Both N N Y
Tape Extract
Wiz
SMBR Legato 2864/A20/8160 Both N N Y
Tape Extract
Wiz
SMBR NetBackup 2864/A20/8161 Both N N Y
Extract Wiz
SMBR PST Tape 2864/A20/8162 Both N N Y
Extract Wiz
SMBR HP Extract 2864/A20/8163 Both N N Y
Wiz
Power Cord, 2864/A20/9016 Plant N N Y
Taiwan
250V
Num. of FC 2864/A20/9557 Plant N N Y
Target
Ports
Num. of FC 2864/A20/9558 Plant N N Y
Storage
Loops
Num. of SATA 2864/A20/9559 Plant N N Y
Storage
Loops
- 1
- Customer setup
- 2
- The feature can be removed only through a feature conversion transaction.
Y = Yes
N = No
ICA maintenance
IO8
next-day
Machine IBM
type/model/ On-site IOR
feature Repair 4-hr resp.
number (IOR), 9 x 5 IOR, 24 x 7
2864-A10-7218 $ 0 $ 0
2864-A10-7219 129 180
2864-A10-7220 129 180
2864-A10-8000 8 11
2864-A10-8001 15 22
2864-A10-8002 26 36
2864-A10-8003 41 58
2864-A10-8004 8 11
2864-A10-8005 15 22
2864-A10-8006 26 36
2864-A10-8007 41 58
2864-A10-8008 8 11
2864-A10-8009 15 22
2864-A10-8010 26 36
2864-A10-8011 41 58
2864-A10-8020 8 11
2864-A10-8021 15 22
2864-A10-8022 26 36
2864-A10-8023 41 58
2864-A10-8040 0 0
2864-A10-8121 0 0
2864-A10-8122 0 0
2864-A10-8131 39 54
2864-A10-8132 0 0
2864-A10-8141 39 54
2864-A10-8142 0 0
2864-A10-8150 10 14
2864-A10-8151 22 30
2864-A10-8152 34 48
2864-A10-8153 70 97
2864-A10-8154 113 158
2864-A10-8155 193 270
2864-A10-8156 943 1,320
2864-A10-8157 0 0
2864-A10-8158 0 0
2864-A10-8159 0 0
2864-A10-8160 0 0
2864-A10-8161 0 0
2864-A10-8162 5 7
2864-A10-8163 0 0
2864-A20-7270 0 0
2864-A20-7271 219 307
2864-A20-7272 219 307
2864-A20-8000 8 11
2864-A20-8001 15 22
2864-A20-8002 26 36
2864-A20-8003 41 58
2864-A20-8004 8 11
2864-A20-8005 15 22
2864-A20-8006 26 36
2864-A20-8007 41 58
2864-A20-8008 8 11
2864-A20-8009 15 22
2864-A20-8010 26 36
2864-A20-8011 41 58
2864-A20-8020 8 11
2864-A20-8021 15 22
2864-A20-8022 26 36
2864-A20-8023 41 58
2864-A20-8040 0 0
2864-A20-8121 0 0
2864-A20-8122 0 0
2864-A20-8131 39 54
2864-A20-8132 0 0
2864-A20-8141 39 54
2864-A20-8142 0 0
2864-A20-8150 10 14
2864-A20-8151 22 30
2864-A20-8152 34 48
2864-A20-8153 70 97
2864-A20-8154 113 158
2864-A20-8155 193 270
2864-A20-8156 943 1,320
2864-A20-8157 0 0
2864-A20-8158 0 0
2864-A20-8159 0 0
2864-A20-8160 0 0
2864-A20-8161 0 0
2864-A20-8162 5 7
2864-A20-8163 0 0
Feature conversion purchase price
Feature
conversion
Feature Returned Continuous purchase
From To parts maintenance price
7218 7270 No Yes $ 0
7219 7271 No Yes 0
7220 7272 No Yes 0
Back to top
|
|
| Order now |
|
To order, contact the Americas Call Centers, your local IBM representative, or your IBM Business Partner.
To identify your local IBM representative or IBM Business Partner, call 800-IBM-4YOU (426-4968).
Phone: 800-IBM-CALL (426-2255)
Fax: 800-2IBM-FAX (242-6329)
Internet: callserv@ca.ibm.com
Mail: IBM Americas Call Centers
Dept. Teleweb Customer Support, 9th floor
105 Moatfield Drive
North York, Ontario
Canada M3B 3R1
Reference: YE001
The Americas Call Centers, our national direct marketing organization, can add your name to the mailing list for catalogs of IBM products.
Note: Shipments will begin after the planned availability date.
Trademarks
Back to top
Printable version