IBM System p5 520 expands offerings in the entry server environment

IBM United States Hardware Announcement 105-405
October 4, 2005

 

 ENUS105-405.PDF (129KB)

Table of contents   Document options  
TOC link At a glance TOC link Services
TOC link Overview TOC link Technical information
TOC link Key prerequisites TOC link IBM Electronic Services
TOC link Planned availability dates TOC link Terms and conditions
TOC link Description TOC link Prices
TOC link Solutions TOC link Order now
TOC link Publications  
 
Printable version Printable version

(Corrected on October 17, 2005)

Various feature numbers in the Technical information section were corrected.

(Corrected on October 13, 2005)

The EMC Conformance Certification information was revised.
 

At a glance

The IBM System p5™ 520 offers:

  • 64-bit scalability in a 2-way configuration
  • A powerful, symmetric multiprocessing (SMP), business server
  • Deskside or rack-mount configuration
  • Performance and capacity needed by your On Demand Business applications
  • Up to 32 GB of memory
  • Up to 2400 GB of internal disk storage
  • Two slimline media bays for DVD-ROM and DVD-RAM
  • One media bay for tape drive

For ordering, contact:

Your IBM representative, an IBM Business Partner, or IBM Americas Call Centers at 800-IBM-CALL (Reference: YE001).
 
Back topBack to top
 

Overview

The IBM System p5™ 520 is an up-to-2-way small database and branch application server available in a rack or deskside form factor.

The p5-520 server (9131-52A) gives you new tools for servers managing business, greater application flexibility, and innovative technology — all designed to help you become an On Demand Business. The p5-520 is a follow-on to the highly successful IBM eServer OpenPower™ 720 and the IBM eServer p5 520.

The p5-520 is available in a 2-way configuration using a 2-way 1.9 GHz IBM POWER5+™ processor with a 36 MB L3 cache.

The base 1 GB of main memory can be expanded to 32 GB for faster performance and exploitation of 64-bit addressing as used in large database applications.

The p5-520 contains up to 11 bays. Four of the bays are front-accessible, hot-swap-capable DASD bays in a minimum configuration with an additional four hot-swap-capable DASD bays optional. The eight DASD bays can accommodate up to 2400 GB of disk storage. Two of the remaining three bays are used for a DVD-ROM and a DVD-RAM, and the last bay can contain a tape drive.

Other integrated features include:

  • Six expansion slots
    • Three hot-swap 133 MHz 64-bit PCI-X slots
    • Two hot-swap 66 MHz 32-bit PCI-X slots
    • One hot-swap DDR 266 MHz 64-bit PCI-X slot
  • One GX slot
  • Service Processor
  • Two 10/100/1000 Ethernet Ports
  • IDE controller for connection to internal optical devices
  • Ultra320 SCSI controller with dual ports (internal) and optional RAID adapter
  • Two system ports and two USB ports
  • Two HMC/UPC ports and two SPCN ports
  • Hot-swap power and cooling
  • Redundant cooling

 
Back topBack to top
 
Key prerequisites

If installing AIX® on the system (one of these):

  • AIX 5L™ for POWER™ V5.2 with the 5200-07 Recommended Maintenance Package (APAR IY67914), or later
  • AIX 5L for POWER V5.3, with the 5300-03 Recommended Maintenance Package (APAR IY71011), or later

If installing Linux™ on the system (one of these):

  • SUSE LINUX Enterprise Server 9 for POWER Systems, or later
  • Red Hat Enterprise Linux AS 4 for POWER, or later

 
Back topBack to top
 
Planned availability dates
  • October 14, 2005, for all features except feature numbers 1820, 1912, 5736, and 1934
  • November 18, 2005, for feature number 1820
  • February 24, 2006, for feature numbers 1912 and 5736
  • March 31, 2006, for feature number 1934

 
Back topBack to top
 
Description

IBM System p5 520

Summary of standard features:

  • Deskside or rack-mount (4U) configurations
  • 2-way SMP design (one processor card)
    • 2-way 1.9 GHz with 36 MB L3 cache
  • 1 GB of DDR-2 533 MHz ECC memory
    • Expandable to 32 GB
  • Eight hot-swap disk drive bays — two four packs
    • Four standard and four optional
  • Three media bays:
    • One DVD-ROM (optional)
    • One DVD-RAM (optional)
    • One tape drive (optional)
  • A maximum of six hot-swap PCI-X slots:
    • Three 133 MHz 64-bit PCI-X slots
    • One 266 MHz 64-bit PCI-X slot
    • Two 66 MHz 32-bit PCI-X slots
  • One 4-pack disk drive enclosure
  • One Media Backplane
  • Integrated:
    • Service Processor
    • IDE controller for connection to internal optical devices
    • Dual 10/100/1000 Gb Ethernet
    • Ultra320 SCSI controller with dual ports (internal) and optional RAID adapter
    • One GX slot
    • Hot-swap and redundant fans
    • Two USB ports
    • Two system ports
    • Two HMC/UPC ports
  • One Power Supply, 850 Watt AC, Hot-swap, Base (redundant power optional)

The minimum p5-520 configuration must include a processor, Processor Entitlements, memory, power supply, hard disk, a disk drive enclosure, a Media Backplane, a power cord, one or two configuration indicators, and a Language Group Specify. The defaults, if no choice is made, are:

2-way, 1.9 GHz processor,
36 MB L3 cache                    (#8330)
Two Processor Entitlements        (2 x #7320)
1 GB memory DIMM                  (#1930)
Power supply, 850 Watt AC, Base   (#5159)
73.4 GB 10,000 RPM Disk Drive     (#1968)
4-pack disk drive enclosure       (#6574)
Media Backplane                   (#7877)
Configuration indicator           (#7184 or 7185 for deskside
                                   system; #7190 and #7160
                                   or #7161 for (rack-mount
                                   system)
Language Group Specify            (#9300 or #97xx)
Power Cord                        (#6458, #6460, #6469-#6478,
                                   #6487, #6488, #6493-#6496,
                                   #6651, #6659, #6660, #6669,
                                   #6670, #6671, #6672, #6680,
                                   #6687)

IBM System p5 520 Express Product Offering

Express Product Offerings are available only as initial order.

If you order a System p5 520 server Express Product Offering as defined here, you may qualify for a processor activation at no extra charge. The number of processors, total memory, quantity/size of disk, and presence of a media device are the only features that determine if a customer is entitled to a Processor Entitlement at no additional charge.

When you purchase an Express Product Offering, you will be entitled to a lower priced AIX 5L or Linux operating system license, or you may choose to purchase the system with no operating system. The lower priced AIX 5L or Linux operating system is processed via a feature number on AIX 5L and either Red Hat or SUSE LINUX. You may choose either the lower priced AIX 5L or Linux subscription but not both. If you choose AIX 5L for your lower priced operating system, you can also order Linux but will purchase your Linux subscription at full price versus the reduced price. The converse is true if you choose a Linux subscription as your lower priced operating system.

Systems with a discounted AIX 5L offering will be referred to as the IBM System p5 Express, AIX 5L edition; and systems with a lower priced Linux operating system will be referred to as the IBM System p5 Express, OpenPower editions. In the case of Linux, only the fist subscription purchased is lower priced so, for example, additional licenses purchased for Red Hat to run in multiple partitions will be at full price.

You can make changes to the standard features as needed and still qualify for Processor Entitlements at no additional charge and a discounted AIX or Linux operating system license. However, selection of total memory or DASD smaller than the total defined as the minimums disqualifies the order as an Express Product Offering.

If any of the features in an Express Product Offering are changed, the Express Product Offering identification feature (#95XX) will be removed from the order.

  • Express Offering:

    Deskside configuration:

    • 1 x 2-way 1.9 GHz processor card (#8330)
    • 2 x 1024 MB (2 x 512 MB) DIMMs (#1930)
    • 2 x 73.4 GB 10,000 RPM Disk Drive (#1968)
    • 1 x IBM Deskside Cover Set (#7184)
    • 1 x Power Supply, 850 Watt (#5159)
    • 1 x DVD-ROM (#1994)
    • 1 x Media Backplane (#7877)
    • 1 x 4-pack disk drive enclosure (#6574)
    • 1 x Language Group Specify (#9300 or #97xx)
    • 1 x Power cord
    • 1 x Processor Entitlement (#7320)
    • 1 x Express Product Offering ID 91311K5 (#9568)

      Receive one Processor Entitlement (#8410) at no additional charge. Two processors are entitled.

    Rack configuration:

    • 1 x 2-way 1.9 GHz processor card (#8330)
    • 2 x 1024 MB (2 x 512 MB) DIMMs (#1930)
    • 2 x 73.4 GB 10,000 RPM Disk Drive (#1968)
    • 1 x IBM Rack-mount Drawer Bezel and Hardware (#7190)
    • 1 x Rack-mount Drawer Rail Kit (#7160)
    • 1 x Power Supply, 850 Watt (#5159)
    • 1 x DVD-ROM (#1994)
    • 1 x Media Backplane (#7877)
    • 1 x 4-pack disk drive enclosure (#6574)
    • 1 x Language Group Specify (#9300 or 97xx)
    • 1 x Power cord
    • 1 x Processor Entitlement (#7320)
    • 1 x Express Product Offering ID 91311K6 (#9569)

      Receive one Processor Entitlement (#8410) at no additional charge. Two processors are entitled.

Reliability, Availability, and Serviceability (RAS)

Reliability, fault tolerance, and data integrity: The reliability of the System p5 520 starts with components, devices, and subsystems that are designed to be fault-tolerant. During the design and development process, subsystems go through rigorous verification and integration testing processes. During system manufacturing, systems go through a thorough testing process to help ensure the highest product quality level.

The p5-520 system L3 cache and system memory offers ECC (error checking and correcting) fault-tolerant features. ECC is designed to correct environmentally induced, single-bit, intermittent memory failures and single-bit hard failures. With ECC, the likelihood of memory failures will be substantially reduced. ECC also provides double-bit memory error detection that helps protect data integrity in the event of a double-bit memory failure. System memory also provides 4-bit packet error detection that helps to protect data integrity in the event of a DRAM chip failure. The system bus, I/O bus, and PCI buses are designed with parity error detection.

Disk mirroring and disk controller duplexing are also provided by the AIX operating system. Linux supports DASD mirroring (RAID 1). This is supported in software using the md driver. Some hardware RAID adapters supported under Linux support mirroring.

The Journaled File System maintains file system consistency and reduces the likelihood of data loss when the system is abnormally halted due to a power failure.

PCI extended error handling (EEH)1: In the past, PCI bus parity errors caused a global machine check interrupt, which eventually required a system reboot to continue. In the POWER5+ systems, new I/O drawer hardware, system firmware, and AIX interaction have been designed to allow transparent recovery of intermittent PCI bus parity errors and graceful transition to the I/O device available state in the case of a permanent parity error in the PCI bus. This mechanism is called PCI extended error handling (EEH).

EEH-enabled adapters respond to a special data packet generated from the affected PCI slot hardware by calling system firmware, which will examine the affected bus, allow the device driver to reset it, and continue without a system reboot. Currently, Linux does not support the EEH behavior. In the event of a PCI error, the system will machine check and a reboot will be required to continue.

1
Indicates that this RAS function is not supported under Linux.

Memory error correction extensions: The standard memory has single-error-correct and double-error-detect ECC circuitry designed to correct single-bit memory failures. The double-bit detection is designed to help maintain data integrity by detecting and reporting multiple errors beyond what the ECC circuitry can correct. The memory chips are organized such that the failure of any specific memory module only affects a single bit within an ECC word (bit scattering), thus allowing for error correction and continued operation in the presence of a complete chip failure (Chipkill™ recovery).

The memory also utilizes memory scrubbing and thresholding to determine when spare memory modules, within each bank of memory, if available, should be used to replace ones that have exceeded their threshold value (dynamic bit steering).

Redundancy for array self-healing: Although the most likely failure event in a processor is a soft single-bit error in one of its caches, other events can occur, and they need to be distinguished from one another. For the L1, L2, and L3 caches and their directories, hardware and firmware keep track of whether permanent errors are being corrected beyond a threshold. If exceeded, a deferred repair error log is created. Additional run-time availability actions, such as CPU vary off2 or L3 cache line delete, are also initiated.

L1 and L2 caches and L2 and L3 directories on the POWER5+ chip are manufactured with spare bits in their arrays that can be accessed via programmable steering logic to replace faulty bits in the respective arrays. This is analogous to the redundant bit steering employed in main storage as a mechanism that is designed to help avoid physical repair, and is also implemented in POWER5+ systems. The steering logic is activated during processor initialization and is initiated by the built-in system-test (BIST) at power-on time.

L3 cache redundancy is implemented at the cache line granularity level. Exceeding correctable error thresholds while running causes invocation of a dynamic L3 cache line delete function.

2
Indicates that this RAS function is only available for a Linux operating system running the 2.6 kernel.

Service Processor: The Service Processor that is standard on the System p5 systems provides the capability to diagnose, check the status of, and sense the operational conditions of a remote system.

The Service Processor runs on its own power boundary and does not require a system processor to be operational to perform its tasks.

The Service Processor supports surveillance of the connection to the HMC and to the system firmware (Hypervisor). It also provides several remote power control options, environmental monitoring (but only critical errors are supported under Linux), reset and boot features, and remote maintenance and diagnostic functions, including console mirroring.

The Service Processor can place calls to report surveillance failures, critical environmental faults, and critical processing faults when the system is not managed by an HMC running Service Focal Point.

Fault monitoring functions

  • BIST and POST (power-on self-test) check processor, L3 cache, memory, and associated hardware required for proper booting of the operating system, every time the system is powered on. If a noncritical error is detected or if the errors occur in the resources that can be removed from the system configuration, the booting process is designed to proceed to completion. The errors are logged in the system nonvolatile RAM (NVRAM).
  • Disk drive fault tracking can alert the system administrator of an impending disk failure before it impacts customer operation.
  • The AIX or Linux log (where hardware and software failures are recorded and analyzed by the Error Log Analysis [ELA] routine) warns the system administrator about the causes of system problems. The Service Processor event log also logs unrecoverable checkstop conditions and forwards them to the Service Focal Point if the system is HMC-attached. This also enables IBM service representatives to bring along probable replacement hardware components when a service call is placed, thus minimizing system repair time.

Mutual surveillance: The Service Processor monitors the operation of the firmware during the boot process and also monitors the Hypervisor for termination. The Hypervisor monitors the Service Processor and will perform a reset/reload if it detects the loss of the Service Processor. If the reset/reload doesn't correct the problem with the Service Processor, the Hypervisor will notify the operating system and the operating system can take appropriate action, including calling for service.

Environmental monitoring functions

  • Temperature monitoring increases the fan speed rotation when ambient temperature is above the normal operating range.
  • Temperature monitoring warns the system administrator of potential environmental-related problems (for example, air conditioning and air circulation around the system) so that appropriate corrective actions can be taken before a critical failure threshold is reached. It also performs an orderly system shutdown when the operating temperature exceeds the critical level.
  • Fan speed monitoring provides a warning and an orderly system shutdown when the speed is out of operational specification.
  • Voltage monitoring provides warning and an orderly system shutdown when the voltages are out of operational specification.

Error handling and reporting: In the unlikely event of system hardware or environmentally induced failure, the system run-time error capture capability systematically analyzes the hardware error signature to determine the cause of failure. The analysis result will be stored in system NVRAM. When the system can be successfully rebooted either manually or automatically, the error will be reported to the AIX or Linux operating system. ELA can be used to display the failure cause and the physical location of the failing hardware.

With the integrated Service Processor, the system has the ability to automatically send out an alert via phone line to a pager or call for service in the event of a critical system failure. A hardware fault will also turn on the two Attention Indicators (one located on the front of the system unit and the other on the rear) to alert the user of an internal hardware problem. The indicator may also be turned on by the operator as a tool to allow system identification. For identification, the indicators will flash, whereas the indicator will be on solid when an error condition occurs.

Availability enhancement functions

  • The auto-restart (reboot) option, when enabled, can reboot the system automatically following an unrecoverable software error, software hang, hardware failure, or environmentally induced (ac power) failure.

Serviceability: The p5-520 is designed for customer setup of the machine and for subsequent addition of most features (adapters/devices)2 For a fee, IBM Service can perform the installation.

  • The p5-520 allows customers to replace service parts (customer replaceable unit). To do this, the p5-520 has incorporated LEDs that will indicate the parts needing to be replaced.
  • The p5-520 allows support personnel to remotely log into them to review error logs and perform remote maintenance. The p5-520 Service Processor enables the analysis of a system that will not boot.
  • The diagnostics consist of Stand-alone Diagnostics, which are loaded from the DVD-ROM drive, and Online Diagnostics.
  • Online Diagnostics1 when installed, are resident with AIX on the disk or system. They can be booted in single-user mode (service mode), run in maintenance mode, or run concurrently (concurrent mode) with other applications. They have access to the AIX Error Log and the AIX Configuration Data.
    • Service mode allows checking of system devices and features.
    • Concurrent mode allows the normal system functions to continue while selected resources are being checked.
    • Maintenance mode allows checking of most system resources.
  • For results of Service Processor tests, access the error log from the Service Processor menu.

Service Agent: The Service Agent is available at no additional charge. When installed on a System p5, the Service Agent can enhance IBM's ability to provide the system with maintenance service.

The Service Agent:

  • Monitors and analyzes system errors, and if needed, can automatically place a service call to IBM without customer intervention
  • Can help reduce the effect of business disruptions due to unplanned system outages and failures
  • Performs problem analysis on a subset of hardware-related problems and, with customer authorization, can report automatically the results to IBM Service

Business Partner information

If you are a Direct Reseller - System Reseller acquiring products from IBM, you may link directly to Business Partner information for this announcement. A PartnerWorld ID and password are required (use IBM ID).

BP Attachment for Announcement Letter 105-405

Trademarks

 
System p5, OpenPower, POWER5+, AIX 5L, POWER, Chipkill, SystemSeller, and EIA are trademarks of International Business Machines Corporation in the United States or other countries or both.
 
The e-business logo, AIX, and TotalStorage are registered trademarks of International Business Machines Corporation in the United States or other countries or both.
 
Linux is a trademark of Linus Torvalds in the United States, other countries or both.
 
ThinkVision is a registered trademark of Lenovo in the United States, other countries, or both
 
Other company, product, and service names may be trademarks or service marks of others.

 
Back topBack to top
 
Solutions

To complement the IBM System p5 Express, IBM solutions have been designed, integrated, and tested to address many common business needs of the client. These solutions integrate a wide variety of applications and System p5 servers to address business priorities, including:

  • E-mail security
  • Web serving with IBM WebSphere® Application Server and Apache HTTP Server
  • File-and-print
  • High performance computing for life sciences
  • ERP with SAP solutions
  • BI and database management with DB2 Universal Database® (UDB), Sybase Adaptive Server Enterprise, and Sybase Risk Analytics Platform.

For more information about IBM System p5 solutions, visit

IBM eServer OpenPower™ Consolidation Express solution: The OpenPower Consolidation Express solution gives clients and IBM Business Partners greater flexibility, lower cost, and simplified operation through consolidation of popular Linux operating system workloads. Key features include:

Pre-tested configurations with optional IBM Advanced POWER™ Virtualization

  • Integrated Virtualization Manager, which helps lower TCO and improve ease of use
  • Tutorial step-by-step guide with installation and configuration details

Popular workloads

  • File-and-print, Web serving, e-mail security, and others

Choice of Linux OS distribution

  • Red Hat Enterprise Linux AS 4 for POWER (RHEL AS 4)
  • SUSE LINUX Enterprise Server 9 for POWER (SLES 9)

Designed for smaller and mid-sized organizations, the OpenPower Consolidation Express solution gives companies an easy way to consolidate legacy and new servers running infrastructure workloads from file-and-print services to Web serving to create an efficient environment that can help reduce operational costs and improve profitability. This solution combines the high performance and low cost of IBM System p5 and OpenPower servers with the freedom and cost-effectiveness of a Linux operating system. Installation is simplified through a comprehensive, yet easy-to-use tutorial solution reference architecture guide, taking the administrator from unboxing the hardware through virtualization setup and operating system and application installation.

With optional advanced virtualization capabilities and comprehensive installation and management tools, this solution provides a simplified, cost-effective building block to prepare companies for today's and tomorrow's on demand environment.

The OpenPower Consolidation Express solution consists of:

  • IBM POWER server from the following list (pretested solution starting point configurations specify specific server)
    • IBM System p5 520 or 550
    • OpenPower 710 or 720
  • Advanced POWER Virtualization option
  • Integrated Virtualization Manager (IVM)
  • Choice of distributions:
    • SUSE LINUX Enterprise Server 9 for POWER (SLES 9)
    • Red Hat Enterprise Linux AS 4 for POWER (RHEL AS 4)
  • Solution Fast Start Kit available for English only includes:
    • Tutorial manual with step-by-step install, configure, integrate, and tune instructions
    • Best practices document to enhance effectiveness of IT infrastructure applications in a virtualization environment
    • Entry, small, medium, and large pre-tested Solution Starter Points
    • Recommended dynamic LPAR and Micro-Partitioning™ configurations
    • Frequently Asked Questions (FAQ) periodically updated
    • Sizing for popular combinations of stack components3
      • Directory/Authentication: OpenLDAP server
      • Firewall: SUSEFirewall2, Red Hat firewall
      • File-and-print: Samba 3
      • Network file serving: NFS
      • Web server: Apache HTTP Server
      • E-mail: Bynari Insight Server from Bynari, Inc.
      • E-mail security: Message Processing Platform from Message Partners
  • Optional SupportLine for Linux
  • Optional IBM Services for implementation and migration
  • Optional IGF financing and leasing

For more information on the OpenPower Consolidation Express solution, including ordering information, visit the solution Web site

For more information on the IBM integrated portfolio of offerings specifically designed and priced for the mid-market, visit the following Web site and click the Offerings tab

3
Supported applications are either available on the standard Linux OS distributions for POWER platforms orderable through IBM and the distribution vendors or obtained directly from Bynari, Inc. (Bynari Insight Server) and Message Partners (Message Processing Platform).

Dynamic logical partitioning (LPAR)

The dynamic LPAR function provides enhanced resource management for the System p5 520. Dynamic LPAR allows available system resources to be quickly and easily configured across multiple logical partitions to meet the rapidly changing needs of your business.

Dynamic LPAR also allows you to add new system resources such as new hot-plug PCI adapters into your system's configuration without requiring a reboot. As many as two LPARs are supported in a 2-way p5-520 without the Advanced POWER Virtualization feature (#7940). If the Advanced POWER Virtualization feature is installed in the system, up to 10 dynamic LPARs per processor (20 per 2-way processor card) are supported in the stand-alone SMP server configuration on the p5-520. LPAR requires the use of an HMC.

Dynamic LPAR is supported by the following levels of the AIX® and Linux operating systems:

  • AIX 5L™ for POWER V5.2, or later
  • SUSE LINUX Enterprise Server 9 for POWER Systems, or later
  • Red Hat Enterprise Linux AS 4 for POWER, or later

An IBM 7310-CR2 Rack-Mounted HMC or 7310-C03 Desktop HMC is required to manage POWER5+™ processor-based servers implementing partitioning. Multiple partitions and multiple POWER5+ processor-based servers can be supported by an HMC, located locally or remotely attached to the IBM System p5.

The HMC is not required for a partition to run, but is required for a p5-520 system to create, define, and change the partition.

Advanced POWER Virtualization

Advanced POWER Virtualization (#7940) allows customers to create partitions in units of less than 1 CPU (sub-CPU LPARs) and allows the same system I/O to be virtually added to these partitions. The optional feature, available for a fee, also includes a software component that provides cross-partition workload management.

New in this release of Advanced POWER Virtualization is the Integrated Virtualization Manager (IVM). IVM is a browser-based system management interface that you can use to manage a single system without an HMC. Supported HMC-less systems that have the IBM Virtual I/O Server in a managed system can use IVM to create logical partitions on a single managed system, manage the virtual storage and virtual Ethernet on the managed system, and view service information related to the managed system. IVM is included at no additional charge as part of the optional Advanced POWER Virtualization (#7940).

Advanced POWER Virtualization combines three components:

  • Firmware feature to turn on Micro-Partitioning (#7940)
  • Software feature to activate the I/O Virtualization
  • Software feature providing partition load management

At initial order entry, selecting feature number 7940 will result in Micro-Partitioning to be enabled during manufacture and the enabling software media and publications to be shipped to the customer. When ordering feature number 7940 as an MES, an activation key will be posted on an IBM Web site, and the customer must retrieve it and install it on the system.

The IBM Web site is

Other features of Advanced POWER Virtualization

  • If any processors in a system have the Virtualization feature, all active processors must have it.
  • Once the Virtualization feature is installed in a system, it cannot be removed.
  • Virtual Ethernet and Virtual Storage are part of Advanced POWER Virtualization.
  • Partition Load Manager provides automated CPU and memory resource management across AIX 5.2/5.3 logical partitions.

Advanced POWER Virtualization is supported by the following levels of the AIX and Linux operating systems:

  • AIX 5L for POWER V5.3, or later
  • SUSE LINUX Enterprise Server 9 for POWER Systems, or later
  • Red Hat Enterprise Linux AS 4 for POWER, or later

 
Back topBack to top
 
Publications

The following information is shipped with the 9131-52A. Additional copies are available. To order, contact your IBM representative.

                                                  Order
Title                                             number
 
IBM System Hardware Information Center            SK3T-8159
 CD-ROM
IBM eServer Safety Information                    G229-9054
Setup Instructions                                SA41-5156
IBM Statement of Limited Warranty                 Z125-4753
IBM License Agreement for Machine Code            Z125-5468
Pointer Sheet for Machine Internal Code           GC52-1065
 License Agreement

Hardware documentation such as installation instructions, user's information, and service information are available to download or view at

AIX documentation can be found at the pSeries® and AIX Information Center at

The Publication Notification System (PNS) is available by order number/product number. Customers currently subscribing to PNS will automatically receive notifications by e-mail. Customers who want to subscribe can visit the PNS Web site location at

The publications listed on the notification can be ordered by calling the Publication Support Group in Raleigh at 800-879-2755, option 1. The IBM Publications Center Portal

The Publications Center is a worldwide central repository for IBM product publications and marketing material with a catalog of 70,000 items. Extensive search facilities are provided, as well as payment options via credit card. Furthermore, a large number of publications are available online in various file formats, which can currently be downloaded free of charge.

Note: PNS subscribers most often order their publications via the Publication Center.
 
Back topBack to top
 

Services

Integrated Technology Services

IBM services include business consulting, outsourcing, hosting services, applications, and other technology management.

These services help you learn about, plan, install, manage, or optimize your IT infrastructure to be an On Demand Business. They can help you integrate your high-speed networks, storage systems, application servers, wireless protocols, and an array of platforms, middleware, and communications software for IBM and many non-IBM offerings. IBM is your one-stop shop for IT support needs.

For details on available services, contact your IBM representative or visit

For details on available IBM Business Continuity and Recovery Services, contact your IBM representative or visit

For details on education offerings related to specific products, visit

Select your country, and then select the product as the category.
 
Back topBack to top
 

Technical information

Physical specifications

  • Deskside/Desktop:
    • Width: 190 mm (7.5 in)
    • Depth: 590 mm (23.2 in)
    • Height: 535 mm (21.1 in)
  • Rack-mount:
    • Width: 442 mm (17.4 in)
    • Depth: 573 mm (22.6 in)
    • Height: 172 mm (6.8 in)
  • Weight:
    • Minimum configuration: 35.5 kg (78.1 lb)
    • Maximum configuration: 43.0 kg (94.6 lb)

Operating environment

  • Temperature: (nonoperating) 5° to 45°C (41° to 113°F); recommended temperature (operating) 5° to 35°C (41° to 95°F)
  • Relative humidity: 8% to 80%
  • Maximum wet bulb: (power off) 27°C (80°F)
  • Operating voltage: 100 to 127 or 200 to 240 V ac (auto-ranging)
  • Operating frequency: 47/63 Hz
  • Power consumption: 600 watts (maximum — 2-way 1.9 GHz)
  • Thermal output: 2,046 Btu/hour (maximum — 2-way 1.9 GHz)
  • Power-source loading
    • 0.632 kVA (maximum configuration — 2-way 1.9 GHz)
    • Maximum altitude: 3,048 m (10,000 ft)

Deskside and sound power (Preliminary data)

  • Deskside: 6.0 bels idle/6.1 bels operating
  • Deskside with Acoustic Cover Set (#7185): 5.0 bels idle/5.1 bels operating
  • Rack-mount: 6.0 bels idle/6.1 bels operating

EMC Conformance Classification: This equipment is subject to FCC rules and shall comply with the appropriate FCC rules before final delivery to the buyer or centers of distribution.

  • U.S.: FCC Class B for deskside/desktop; FCC Class A for rack-mount
  • Europe: CISPR 22 Class B for deskside/desktop; CISPR 22 Class A for rack-mount
  • Japan: VCCI-B for deskside/desktop; VCCI-A for rack-mount
  • Korea: Korean Requirement Class B for deskside/desktop; Korean Requirement Class A for rack-mount
  • China: People's Republic of China commodity inspection law

Homologation — Telecom Environmental Testing (Safety and EMC): Homologation approval for specific countries has been initiated with the IBM Homologation and Type Approval (HT&A) organization in LaGaude. This System p5 model and applicable features meet the environmental testing requirements of the country Telecom and have been designed and tested in compliance with the Full Quality Assurance Approval (FQAA) process as delivered by the British Approval Board for Telecom (BABT), the U.K. Telecom regulatory authority.

Product safety/country testing/certification

  • UL 1950 Underwriters Laboratory, Safety Information
  • CSA C22.2 No. 950-M86
  • EN60950 European Norm
  • IEC 950, Edition 1, International Electrotechnical Commission, Safety Information
  • Nordic deviations to IEC-950 1st Edition, as outlined in document EMKO-TSE (05-SEC) 200/93

General requirements: The product is in compliance with IBM Corporate Bulletin C-B 0-2594-000 Statement of Conformity of IBM Product to External Standard (Suppliers Declaration).

Hardware requirements

IBM System p5 520 minimum system configuration: The p5-520 server can be configured to incorporate a 2-way processor, 32 GB of system memory, six PCI adapters, and multiple media devices, as desired. This flexibility is made available through the many optional features for the p5-520.

Each p5-520 must include a minimum of the following items:

  • One system Central Electronics Complex (CEC) enclosure with the following items:
    • One power cord (#6458, #6460, #6469-#6478, #6487, #6488, #6493-#6496, #6651, #6659, #6660, #6669, #6670, #6671, #6672, #6680, #6687)
    • One Language Group Specify (#9300 or #97xx)
  • One processor card — chosen from:
    • POWER5+ processor — 2-way 1.9 GHz, 36 MB L3 Cache (#8330)
  • Two Processor Entitlements:
    • 2 x #7320, or 1 x #7320 and 1 x #8410 with processor card #8330
  • Choose 1 GB minimum memory from:
    • 1024 MB DDR-2 Memory (2 x 512 MB DIMMs)(#1930)
    • 2048 MB DDR-2 Memory (2 x 1024 MB DIMMs)(#1931)
    • 4096 MB DDR-2 Memory (2 x 2048 MB DIMMs)(#1932)
    • 8192 MB DDR-2 Memory (2 x 4096 MB DIMMs)(#1934)
  • Choose disk drive from:
    • 36.4 GB Ultra320 15,000 RPM (#1970)
    • 73.4 GB Ultra320 10,000 RPM (#1968)
    • 73.4 GB Ultra320 15,000 RPM (#1971)
    • 146.8 GB Ultra320 10,000 RPM (#1969)
    • 146.8 GB Ultra320 15,000 RPM (#1972)
    • 300 GB Ultra320 10,000 RPM (#1973)
  • One 4-pack disk drive enclosure (#6574)
  • Choose power supply from:
    • 850 Watt AC, Hot-swap, Base (#5159)
    • 700 Watt AC, Hot-swap, Base (#5170)
  • One Media Backplane (#7877)
  • One or two configuration indicators
    • #7184 for deskside system with IBM cover set
    • #7185 for deskside system with IBM Acoustic Cover Set
    • #7190 for rack-mount system with IBM bezel
    • #7160 for rack-mount system with IBM rack mounting rails
    • #7161 for rack-mount system with OEM rack mounting rails

    Note: If feature number 7190 is selected, either feature number 7160 or 7161 must be selected.

RAID: Internal RAID is available on the p5-520.

A number of options are available to customers wanting to install RAID on their systems:

  • Install feature number 1907, the Dual Channel SCSI RAID Enablement Card. Install four disk drives in feature number 6574, the Ultra320 SCSI 4-pack enclosure. This will allow RAID capabilities within a single 4-pack of DASD.
  • Install feature number 1907. Install a second feature number 6574. This will allow RAID capabilities across two 4-packs of DASD.
  • Install feature number 1907. Install feature number 6594, the Ultra320 SCSI 4-Pack Enclosure for Disk Mirroring. Install feature number 1975, the PCI-X Dual Channel Ultra320 SCSI RAID Adapter. Install feature number 4267, the SCSI Cable, which connects the PCI Adapter to feature number 6594.

Software requirements

If installing AIX on the system (one of these):

  • AIX 5L for POWER V5.2 with the 5200-07 Recommended Maintenance Package (APAR IY67914), or later
  • AIX 5L for POWER V5.3 with the 5300-03 Recommended Maintenance Package (APAR IY71011), or later

If installing Linux on the system (one of these):

  • SUSE LINUX Enterprise Server 9 for POWER Systems, or later
  • Red Hat Enterprise Linux AS 4 for POWER, or later

    Notes

    • Not all p5-520 features are available under the AIX operating system.
    • IDE DVD-ROM/DVD-RAM DLPAR operation is not supported by Red Hat Enterprise Linux AS 4 for POWER.

Information on features and external devices supported by Linux on the p5-520 can be found at

If installing the p5-520 server within the Cluster 1600:

  • CSM V1.4 (AIX or Linux)

Limitations

System

  • DDR 266 MHz slot

    SUSE LINUX Enterprise Server 9 for POWER Systems and Red Hat Linux AS4 for POWER do not support PCI-Hot Plug and DLPAR in this slot.

  • External SCSI Port Enablement Cable
    • When feature number 4275 is installed in the system, a second 4-pack disk enclosure (second #6574 or first #6594) cannot be installed.
    • Slot 5 cannot be used when feature number 4275 is installed in the system.
    • The maximum external cable length supported by feature number 4275 is 6 meters.
  • When an HMC is connected to the system, the integrated system ports are rendered nonfunctional. In this case, the customer must install an asynchronous adapter for serial port usage.
  • The Tie-down Strap Security Device (#8227) is not valid with feature number 7190.
  • Acoustic options
    • The Rear Muffler (#6587) is only available with a deskside configuration (#7184 and #7185).
    • Feature number 7185, the Acoustic Deskside Cover Set, is not available with feature numbers 1812 and 2888.
    • The Acoustic Cover Set (#7185) requires the 700 Watt AC Power Supply (#5170). Feature number 5170 can only be ordered when feature number 7185 is ordered. A second feature number 6574 or a first feature number 6594 cannot be ordered when feature number 7185 is ordered.
  • Integrated system ports are not supported when the HMC ports are connected to an HMC. Either the HMC ports or the integrated system ports can be used, but not both.
  • The integrated system ports are supported for modem and asynch terminal connections. Any other application using serial ports requires a serial port adapter to be installed in a PCI slot. The integrated system ports do not support HACMP™ configurations.

Processor cards

  • Only one processor card may be installed in the system. Processor cards are soldered to the planar.
    • The 2-way 1.9 GHz processor (#8330) requires that at least one entitlement (#7320) be ordered. A maximum of two processor entitlement features (2 x #7320, or 1 x #7320 and 1 x #8410) are allowed per processor card.

      Note: Feature number 8410 is part of the Express Offerings.

    • Each processor card contains 1.9 MB of Level 2 cache.

Power supply

  • The default power supply is an 850 Watt AC Power Supply (#5159), with a second available for redundancy.
  • 700 Watt AC Power Supply (#5170) is available only when the Acoustic Cover Set (#7185) is ordered. No redundant power is available.

Redundant power supply/Fans

  • Second optional ac (#5159) power supply
  • Redundant fans standard

System memory

  • A minimum 1 GB of memory is required.
  • A maximum of 32 GB of system memory is allowed in the system.
  • Memory DIMM feature numbers 1930, 1931, 1932, and 1934 must be ordered and installed in pairs.
  • Memory feature numbers may be mixed within a system.

Figure 1. Memory features

 
                     Feature     Minimum    Maximum
Feature              number      quantity   quantity
 
1024 MB DDR-2         1930          0          4
 
 (2 x 512 MB DIMMs)
2048 MB DDR-2         1931          0          4
 (2 x 1024 MB DIMMs)
4096 MB DDR-2         1932          0          4
 (2 x 2048 MB DIMMs)
8192 MB DDR-2         1934          0          4
 (2 x 4096 MB DIMMs)

PCI card slots: The p5-520 has a maximum of six hot-plug PCI-X slots.

  • Slots 1, 5, and 6 are 64-bit, and run at 133 MHz.
  • Slot 4 is Double Data Rate (DDR), 64-bit, and runs at 266 MHz.
  • Slots 2 and 3 are 32-bit, and run at 66 MHz.
  • Slots 4, 5, and 6 are long; slots 1, 2, and 3 can accommodate short cards only.

Graphics adapters

  • A graphics adapter, keyboard, and mouse are not required in the minimum configuration.
  • The maximum number of graphics adapters supported in the p5-520 is four.

I/O adapters

  • Feature number 1907 is not plugged into a slot.
  • Refer to Figure 2 for additional I/O adapter limitations.
  • Feature numbers 1981, 1982, 5718, and 5719 require that a minimum 2-way processor be installed in the system.
  • A maximum of one of feature number 1981, 1982, 5718, or 5719 is allowed in the system.

Figure 2. I/O adapter features

                              Orderable Supported
                              feature   feature   Max
I/O Adapter                   number    number    qty  Size
 
GX Dual-port 4x IB HCA        1812                  1  Short
PCI-X Dual-port 4x IB HCA     1820                  2  Short
2-port USB PCI                2738                  3  Short
8-Port Asynchronous EIA-232   2943                  2  Short
128-Port Asynchronous                    2944       2  Short
 Controller
ARTIC960 Hx 4-ports           2947                  3  Long
2-Port Multiprotocol                     2962       4  Short
Dual Channel Ultra320         1974                  6  Short
Dual Channel Ultra320 RAID    1975                  3  Long
Dual Channel Ultra320 RAID               5703       3  Long
Dual Channel SCSI RAID                   1976       1  N/A
 Enablement
Dual Channel SCSI RAID                   5709       1  N/A
 Enablement
GXT135P Graphics Accelerator  1980       2849       4  Short
Gigabit Ethernet              1978       5700       6  Short
10/100/1000 Ethernet          1979       5701       6  Short
2-port 10/100/1000 Ether.     1983       5706       6  Short
2-port Gigabit Ethernet-SX    1984       5707       6  Short
10/100 Mbps Ethernet                     1985       6  Short
Dual Channel Ultra SCSI                  5712       6  Short
2 Gb Fibre Channel PCI-X      1977       5716       4  Short
10 Gigabit Ethernet SR        1981       5718       1  Short
10 Gigabit Ethernet LR        1982       5719       1  Short
2-port Asynchronous IEA-232   5723                  2  Short
SCSI RAID Enablement Card     1907       5727       1  N/A
PCI-X Ultra320 SCSI DDR       1912       5736       6  Short
Token-Ring PCI                           4959       4  Short
10/100 Mbps Ethernet                     4962       6  Short
Universal Differential                   6204       2  Short
 Ultra SCSI
2 Gb Fibre Channel                       6239       6  Short
Quad Digital Trunk            6312                  3  Long
Audio PCI Adapter                        8244       1  Short

Storage devices/bays

  • The p5-520 has two DASD 4-packs in the system, one mandatory (#6574) and one optional (#6574 or #6594).
  • Media bays can contain an optional DVD-ROM (#1994 or follow-on) in bays 2 and 3, an optional DVD-RAM (#1993 or follow-on) in bays 2 and 3, and an optional tape drive (#1992, #1991, or follow-ons) in bay 4.
  • If optional tape drive feature number 1992 or 1991 is installed, cable feature number 4278 is required. Cable feature number 4278 requires 1992 or 1991 to be installed.
  • The first optical device can only be installed in the top slimline bay (bay D2) in the rack configuration.
  • If SUSE LINUX Enterprise Server 9 for POWER Systems, or later, or Red Hat Enterprise Linux AS for POWER Version 4, or later, is being installed in the system, either feature number 1993 or 1994, or follow-on, is required.

Figure 3. Storage device features

                                           Orderable Supported
                     Maximum               feature   feature
Device               quantity   Bay        number    number
 
DVD-ROM (IDE)           2       Media 2/3   1994     2640
 
DVD-RAM (IDE)           2       Media 2/3   1993     5751
 
4-mm 36/72 GB Tape      1       Media 4     1991     6258
 (LVD)
 
8-mm 80/160 GB Tape     1       Media 4     1992     6120
 (LVD)
36.4 GB 15,000 RPM      8       DASD 1-8    1970     3277
 Ultra320 SCSI Disk,
 Hot-swap
 
73.4 GB 10,000 RPM,     8       DASD 1-8    1968     3274
 Ultra320 SCSI Disk,
 Hot-swap
 
73.4 GB 15,000 RPM      8       DASD 1-8    1971     3278
 Ultra320 SCSI Disk,
 Hot-swap
 
146.8 GB 10,000 RPM,    8       DASD 1-8    1969     3275
 Ultra320 SCSI Disk,
 Hot-swap
 
146.8 GB 15,000 RPM,    8       DASD 1-8    1972     3279
 Ultra320 SCSI Disk,
 Hot-swap
 
300 GB 10,000 RPM,      8       DASD 1-8    1973     3578
 Ultra320 SCSI Disk,
 Hot-swap

Planning information

Cable orders: No cables required.

Security, auditability, and control

This product uses the security and auditability features of host software and application software.

The customer is responsible for evaluation, selection, and implementation of security features, administrative procedures, and appropriate controls in application systems and communications facilities.
 
Back topBack to top
 

IBM Electronic Services

IBM Global Services has transformed its delivery of hardware and software support services to put you on the road to higher systems availability. IBM Electronic Services is a Web-enabled solution that provides you with an exclusive, no-additional-charge enhancement to the service and support on the IBM eServer. You should benefit from greater system availability due to faster problem resolution and preemptive monitoring. IBM Electronic Services is comprised of two separate, but complementary, elements: IBM Electronic Services news page and IBM Electronic Service Agent™.

IBM Electronic Services news page provides you with a single Internet entry point that replaces the multiple entry points traditionally used by customers to access IBM Internet services and support. The news page enables you to gain easier access to IBM resources for assistance in resolving technical problems.

The IBM Electronic Service Agent is no-additional-charge software that resides on your IBM eServer system. It is designed to proactively monitor events and transmit system inventory information to IBM on a periodic, customer-defined timetable. The IBM Electronic Service Agent tracks system inventory, hardware error logs, and performance information. If the server is under a current IBM maintenance service agreement or within the IBM warranty period, the Service Agent automatically reports hardware problems to IBM. Early knowledge about potential problems enables IBM to provide proactive service that maintains higher system availability and performance. In addition, information collected through the Service Agent will be made available to IBM service support representatives when they are helping answer your questions or diagnosing problems.

To learn how IBM Electronic Services can work for you, visit


 
Back topBack to top
 
Terms and conditions

Volume orders: Contact your IBM representative.

IBM Global Financing: No

Warranty period: Three years

Alternative warranty options are available on a special bid basis from your IBM representative or IBM Business Partner.

Warranty service: If required, IBM provides repair or exchange service depending on the types of warranty service specified for the machine. IBM will attempt to resolve your problem over the telephone or electronically via an IBM Web site. You must follow the problem determination and resolution procedures that IBM specifies. Scheduling of service will depend upon the time of your call and is subject to parts availability. If applicable to your product, parts considered customer replaceable units (CRUs) will be provided as part of the machine's standard warranty service. Service levels are response time objectives and are not guaranteed. The specified level of warranty service may not be available in all worldwide locations. Additional charges may apply outside IBM's normal service area. Contact your local IBM representative or your reseller for country- and location-specific information.

CRU service: IBM provides replacement CRUs to you for you to install. CRU information and replacement instructions are shipped with your machine and are available from IBM upon your request. CRUs are designated as being either a Tier 1 or a Tier 2 CRU.

Tier 1 CRU: Installation of Tier 1 CRUs is your responsibility. If IBM installs a Tier 1 CRU at your request, you will be charged for the installation.

For machines with on-site same-day response service, IBM will replace a Tier 1 CRU part at your request, at no additional charge.

Tier 2 CRU: You may install a Tier 2 CRU yourself or request IBM to install it, at no additional charge.

Based upon availability, CRUs will be shipped for next-business-day delivery. IBM specifies, in the materials shipped with a replacement CRU, whether a defective CRU must be returned to IBM. When return is required, return instructions and a container is shipped with the replacement CRU, and you may be charged for the replacement CRU if IBM does not receive the defective CRU within 30 days of your receipt of the replacement.

The following parts have been designated as Tier 1 CRU parts:

  • Fans
  • Tape drives
  • Hard drives
  • DVD Slimline drive
  • Line/power cord
  • Keyboard
  • Mouse
  • External cables
  • Display
  • Battery
  • Operator panel
  • Power supply
  • All PCI adapters
  • Service Processor

On-site service: IBM will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well-lit, and suitable for the purpose.

  • 9 hours per day, Monday through Friday, excluding holidays, next-business-day (NBD) response

Non-IBM parts support: IBM is now shipping machines with selected non-IBM parts that contain an IBM field replaceable unit (FRU) part number label. These parts are to be serviced during the IBM machine warranty period. IBM is covering the service on these selected non-IBM parts as an accommodation to their customers, and normal warranty service procedures for the IBM machine apply.

Warranty service upgrades and maintenance service options: For ServiceElect (Z125-5510) and ServiceSuite™ (Z125-5745) Statements of Work:

Warranty service upgrades

On-site service: IBM will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well-lit, and suitable for the purpose. The following service selections are available as warranty upgrades for your machine type.

For machines with on-site same-day response service, IBM will replace a Tier 1 CRU part at your request, at no additional charge. For additional information on the CRU service, see warranty information.

  • 9 hours per day, Monday through Friday, excluding holidays, 4-hour average, same-business-day response
  • 24 hours per day, 7 days a week, 4-hour average response
  • 24 hours per day, 7 days a week, 2-hour average response

Maintenance services: If required, IBM provides repair or exchange service depending on the types of warranty service specified for the machine. IBM will attempt to resolve your problem over the telephone or electronically via an IBM Web site. You must follow the problem determination and resolution procedures that IBM specifies. Scheduling of service will depend upon the time of your call and is subject to parts availability. If applicable to your product, parts considered customer replaceable units (CRUs) will be provided as part of the machine's standard maintenance service. Service levels are response time objectives and are not guaranteed. The specified level of warranty service may not be available in all worldwide locations. Additional charges may apply outside IBM's normal service area. Contact your local IBM representative or your reseller for country- and location-specific information.

CRU unit service and on-site service for other selected parts

CRU service: IBM provides replacement CRUs to you for you to install. CRU information and replacement instructions are shipped with your machine and are available from IBM upon your request. CRUs are designated as being either a Tier 1 or a Tier 2 CRU.

Tier 1 CRUs: Installation of Tier 1 CRUs is your responsibility. If IBM installs a Tier 1 CRU at your request, you will be charged for the installation.

For machines with on-site same-day response service, IBM will replace a Tier 1 CRU part at your request, at no additional charge.

Tier 2 CRUs: You may install a Tier 2 CRU yourself or request IBM to install it, at no additional charge.

Based upon availability, CRUs will be shipped for next-business-day delivery. IBM specifies, in the materials shipped with a replacement CRU, whether a defective CRU must be returned to IBM. When return is required, return instructions and a container is shipped with the replacement CRU, and you may be charged for the replacement CRU if IBM does not receive the defective CRU within 30 days of your receipt of the replacement.

The following parts have been designated as Tier 1 CRU parts:

  • Fans
  • Tape drives
  • Hard drives
  • DVD Slimline drive
  • Line/ power cord
  • Keyboard
  • Mouse
  • External cables
  • Display
  • Battery
  • Operator panel
  • Power supply
  • All PCI adapters
  • Service Processor

On-site service: IBM will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well-lit, and suitable for the purpose. The following service selections are available as maintenance options for your machine type.

  • 9 hours per day, Monday through Friday, excluding holidays, NBD response
  • 9 hours per day, Monday through Friday, excluding holidays, 4-hour average, same-business-day response
  • 24 hours per day, 7 days a week, 4-hour average response
  • 24 hours per day, 7 days a week, 2-hour average response

Non-IBM parts support:

Under certain conditions, IBM Integrated Technology Services repairs selected non-IBM parts at no additional charge for machines that are covered under warranty service upgrades or maintenance services.

IBM Service provides hardware problem determination on non-IBM parts (adapter cards, PCMCIA cards, disk drives, memory, and so forth) installed within IBM systems covered under warranty service upgrades or maintenance services and provides the labor to replace the failing parts at no additional charge.

If IBM has a Technical Service Agreement with the manufacturer of the failing part, or if the failing part is an accommodations part (a part with an IBM FRU label), IBM may also source and replace the failing part at no additional charge. For all other non-IBM parts, customers are responsible for sourcing the parts. Installation labor is provided at no additional charge, if the machine is covered under a warranty service upgrade or a maintenance service.

Usage plan machine: No

IBM hourly service rate classification: Two

When a type of service involves the exchange of a machine part, the replacement may not be new, but will be in good working order.

Field-installable features: Yes

Model conversions: No

Machine installation: Customer setup. Customers are responsible for installation according to the instructions IBM provides with the machine.

Graduated program license charges apply: Yes. The applicable processor group is D5.

Licensed machine code: IBM machine code is licensed for use by a customer on the IBM machine for which it was provided by IBM under the terms and conditions of the IBM License Agreement for Machine Code, to enable the machine to function in accordance with its specifications, and only for the capacity authorized by IBM and for which the customer has acquired. You can obtain the agreement by contacting your IBM representative or at

IBM may release changes to the machine code. IBM plans to make the machine code changes available for download from the IBM pSeries technical support Web site

If the machine does not function as warranted and your problem can be resolved through your application of downloadable machine code, you are responsible for downloading and installing these designated machine code changes as IBM specifies. If you would prefer, you may request IBM to install downloadable machine code changes; however, you may be charged for that service.

Educational allowance: A reduced charge is available to qualified education customers. The educational allowance may not be added to any other discount or allowance.


 
Back topBack to top
 

Prices

The prices provided in this announcement are suggested retail prices for the U.S. and are provided for your information only. Dealer prices may vary, and prices may also vary by country. Prices are subject to change without notice. For additional information and current prices, contact your local IBM representative.

The following are newly announced features on the specified models of the IBM System p5 machine type 9131:

                                                  Initial/
                                                  MES/
                       Feature  Purchase          Both/          RP
Description            number   price    MMMC(3)  Support   CSU  MES
 
Machine type/model 9131-52A
 
IBM System p5 MT 9131           $ 1,100  $ 21               Yes
SystemSeller(TM)       0050          NC           Initial
 Indicator
AIX Partition Specify  0265           0           Both      Yes  No
Linux Partition        0266           0           Both      Yes  No
 Specify
Integrate with DR400   0705          NC           Initial
 IBM TotalStorage(R)
 Retention Solution
Integrate with DR550   0706          NC           Initial
 IBM TotalStorage
 Retention Solution
 (single node)
Integrate with DR550   0707          NC           Initial
 IBM TotalStorage
 Retention Solution
 (dual node)
Made in America        0983          NC           Initial
 Indicator
GX Dual-port           1812       1,095           Both      Yes  No
 4x IB HCA
PCI-X Dual-port        1820       1,095           Both      Yes  No
 4x IB HCA
3 meter 4x IB Cable    1835         217           Both      Yes  No
8 meter 4x IB Cable    1836         358           Both      Yes  No
1.5 meter 4x IB Cable  1839         192           Both      Yes  No
SCSI RAID              1907       2,175           Both      Yes  No
 Enablement Card
PCI-X DDR Dual Channel 1912         658           Both      Yes  No
 Ultra320 LVD SCSI
 Adapter
1024 MB (2 x 512 MB)   1930       1,100           Both      Yes  No
 DIMMs, 276-pin, 533
 MHz DDR-2 SDRAM
2048 MB (2 x 1024 MB)  1931       1,700           Both      Yes  No
 DIMMs, 276-pin,
 533 MHz DDR-2
 SDRAM
4096 MB (2 x 2048 MB)  1932       3,550           Both      Yes  No
 DIMMs, 276-pin,
 533 MHz DDR-2
 SDRAM
8192 MB (2 x 4096 MB)  1934      22,000           Both      Yes  No
 DIMMs, 276-pin,
 533 MHz DDR-2
 SDRAM
73.4 GB 10,000 RPM     1968         439           Both      Yes  No
 Ultra320 SCSI Disk
 Drive Assembly
146.8 GB 10,000 RPM    1969         699           Both      Yes  No
 Ultra320 SCSI Disk
 Drive Assembly
36.4 GB 15,000 RPM     1970       1,199           Both      Yes  No
 Ultra320 SCSI Disk
 Drive Assembly
73.4 GB 15,000 RPM     1971       1,999           Both      Yes  No
 Ultra320 SCSI Disk
 Drive Assembly
146.8 GB 15,000 RPM    1972       2,999           Both      Yes  No
 Ultra320 SCSI Disk
 Drive Assembly
300 GB 10,000 RPM      1973       1,500           Both      Yes  No
 Ultra320 SCSI Disk
 Drive Assembly
PCI-X Dual Channel     1974         658           Both      Yes  No
 Ultra320 SCSI         1975       3,000           Both      Yes  No
 Adapter
Dual Channel SCSI      1976       2,175           Support   Yes
 RAID Enablement Card
2 Gigabit Fibre        1977       2,267           Both      Yes  No
 Channel PCI-X
 Adapter
Gigabit Ethernet-SX    1978       1,416           Both      Yes  No
 PCI-X Adapter
IBM 10/100/1000        1979       1,066           Both      Yes  No
 Base-TX Ethernet
 PCI-X Adapter
POWER GXT135P          1980         381           Both      Yes  No
 Graphics
 Accelerator with
 Digital Support
10 Gigabit             1981       5,000           Both      Yes  No
 Ethernet-SR
 PCI-X Adapter
IBM 10 Gigabit         1982       9,853           Both      Yes  No
 Ethernet-LR
 PCI-X Adapter
IBM 2-Port             1983       1,599           Both      Yes  No
 10/100/1000
 Base-TX Ethernet
 PCI-X Adapter
IBM 2-Port Gigabit     1984       2,124           Both      Yes  No
 Ethernet-SX PCI-X
 Adapter
10/100 Mbps Ethernet   1985         412           Support   Yes
 PCI Adapter II
36/72GB 4mm Internal   1991       2,495    61     Both      Yes  No
 Tape Drive
IBM 80/160 GB          1992       2,495   133     Both      Yes  No
 Internal Tape Drive
 with VXA Technology
IBM 4.7 GB IDE         1993       1,000           Both      Yes  No
 Slimline DVD-RAM
 Drive
IDE Slimline           1994         378           Both      Yes  No
 DVD-ROM Drive
PCI SCSI Adapter       2114         225           Both      Yes  No
 16-Bit Differential
 External Y Cable
Converter Cable,       2118          50           Both      Yes  No
 VHDCI to P,
 Mini-68 pin to
 68 pin, 0.3M
0.6M 16-bit SCSI-2     2424          90           Support   Yes
 System-to-System
 Cable
2.5M 16-bit SCSI-2     2425         108           Both      Yes  No
 System-to-System
 Cable
LC-SC 50 Micron Fiber  2456          83           Both      Yes  No
 Converter Cable
LC-SC 62.5 Micron      2459          83           Both      Yes  No
 Fiber Converter
 Cable
External USB 1.44 MB   2591          83           Both      Yes  No
 Diskette Drive
IDE Slimline DVD-ROM   2640         378           Support   Yes
 Drive
2-Port USB PCI         2738         250           Both      Yes  No
 Adapter
POWER GXT135P          2849         381           Support   Yes
 Graphics Accelerator
 with Digital Support
ARTIC960Hx
 4-Port EIA-232 Cable  2861         354           Both      Yes  No
 4-Port X.21 Cable     2863         417           Both      Yes  No
 4-Port V.35 (DTE)     2864         700           Both      Yes  No
  Cable
IBM ARTIC960RxD Quad   2877          25           Both      Yes  No
 DTA, H.100,
 4-Drop Cable
RIO-2 Adapter          2888         475           Both      Yes  No
Asynchronous           2934          37           Both      Yes  No
 Terminal/Printer
 Cable EIA-232
Asynchronous Cable     2936          61           Both      Yes  No
 EIA-232/V.24
8-Port Asynchronous    2943       1,162           Both      Yes  No
 Adapter EIA-232/
 RS-422, PCI bus
128-Port Asynchronous  2944       1,079           Support   Yes
 Controller, PCI bus
IBM ARTIC960Hx 4-Port  2947       3,021           Both      Yes  No
 Multiprotocol PCI
 Adapter
Cable, V.24/EIA-232    2951         146           Support   Yes
Cable, V.35            2952         267           Support   Yes
Cable, V.36/EIA-499    2953         212           Support   Yes
Cable, X.21            2954         146           Support   Yes
 
2-Port Multiprotocol   2962       1,666           Support   Yes
PCI Adapter
Serial-to-Serial
 Port Cable for
  Drawer/Drawer        3124          67           Both      Yes  No
  Rack/Rack            3125          67           Both      Yes  No
RIO-2(Remote I/O-2)
 Cable, 1.2M           3146         350           Both      Yes  No
 Cable, 3.5M           3147         550           Both      Yes  No
 Cable, 10M            3148         850           Both      Yes  No
 Cable, 1.75M          3156         400           Both      Yes  No
 Cable, 2.5M           3168         450           Both      Yes  No
73.4 GB 10,000 RPM     3274         439           Support   Yes
 Ultra320 SCSI Disk
 Drive Assembly
146.8 GB 10,000 RPM    3275         699           Support   Yes
 Ultra320 SCSI Disk
 Drive Assembly
36.4 GB 15,000 RPM     3277       1,199           Support   Yes
 Ultra320 SCSI Disk
 Drive Assembly
73.4 GB 15,000 RPM     3278       1,999           Support   Yes
 Ultra320 SCSI Disk
 Drive Assembly
146.8 GB 15,000 RPM    3279       2,999           Support   Yes
 Ultra320 SCSI Disk
 Drive Assembly
300 GB 10,000 RPM      3578       1,500           Support   Yes
 Ultra320 SCSI Disk
 Drive Assembly
IBM P260/P275 Color    3628       1,166           Support   Yes
 Monitor, Business
 Black, and Cable
L200P Flat Panel       3636       1,645           Both      Yes  No
 Monitor
IBM T541H/L150p        3637         625           Both      Yes  No
 15-inch TFT Color
 Monitor
IBM C220p 21-inch      3638         829           Support   Yes
 Color Monitor,
 Business Black,
 and Cable
ThinkVision(R) L170p   3639         829           Support   Yes
 Flat Panel Monitor
ThinkVision L171p      3640         829           Both      Yes  No
 Flat Panel Monitor
ThinkVision L191p      3642       1,200           Both      Yes  No
 Flat Panel Monitor
Service Package        3752          62           Both      Yes  No
Serial Port            3925          21           Both      Yes  No
 Converter Cable,
 9-pin to 25-pin
Asynch Printer/        3926          76           Both      Yes  No
 Terminal Cable,
 9-pin to 25-pin, 4M
6-Foot Extender        4242          83           Both      Yes  No
 Cable for Displays
 (15-pin D-shell
 to 15-pin D-shell)
Extender Cable --      4256          42           Both      Yes  No
 USB Keyboards, 2M
SCSI Cable, PCI        4267          50           Both      Yes  No
 Adapter to Hot-Swap
 Disks
External SCSI Port     4275         226           Both      Yes  No
 Enablement Cable
SCSI Cables (Power     4278          45           Both      Yes  No
 and Logic), PCI
 Riser to SCSI LVD
 Media Device;
 Mounting Tray
H-100 Bus 8-position   4353          83           Support   Yes
 Cable
Rack Status Beacon
 Cable, Junction Box   4691          10           Support   Yes
  to Drawer or
  Status Beacon
 Cable, Junction Box   4692          10           Support   Yes
  Daisy Chain
 Junction Box          4693         292           Support   Yes
IBM Token-Ring         4959         662           Support   Yes
 PCI Adapter
10/100 Mbps            4962         412           Support   Yes
 Ethernet PCI
 Adapter II
Custom Service         5001          NC           Initial
 Specify
Software Preinstall    5005          NC           Initial
Power Supply,          5159         417           Both      Yes  No
 850 Watt AC,
 Hot-swap, Base
 and Redundant
Power Supply,          5170         800           Both      No   No
 700 Watt AC
IBM Gigabit            5700       1,416           Support   Yes
 Ethernet-SX
 PCI-X Adapter
IBM 10/100/1000        5701       1,066           Support   Yes
 Base-TX Ethernet
 PCI-X Adapter
PCI-X Dual Channel     5703       3,000           Support   Yes
 Ultra320 SCSI
 RAID Adapter
IBM 2-Port             5706       1,599           Support   Yes
 10/100/1000
 Base-TX Ethernet PCI-X
 Adapter
IBM 2-Port Gigabit     5707       2,124           Support   Yes
 Ethernet-SX
 PCI-X Adapter
Dual Channel SCSI      5709       2,175           Support   Yes
 RAID Enablement
 Card
PCI-X Dual Channel     5712         658           Support   Yes
 Ultra320 SCSI
 Adapter
2 Gigabit Fibre        5716       2,267           Support   Yes
 Channel PCI-X
 Adapter
10 Gigabit
 Ethernet-SR           5718       5,000           Support   Yes
  PCI-X Adapter
 Ethernet-LR           5719       9,853           Support   Yes
  PCI-X Adapter
2-Port Asynchronous    5723         285           Both      Yes  No
 IEA-232 PCI Adapter
Dual Channel SCSI      5727       2,175           Support   Yes
 RAID Enablement
 Card
PCI-X DDR 2.0 Dual     5736         658           Support   Yes
 Channel Ultra320
 SCSI Adapter
IBM 4.7 GB IDE         5751       1,000           Support   Yes
 Slimline DVD-RAM
 Drive
Power Control Cable
 (SPCN) -- 2 meter     6001          25           Both      Yes  No
 (SPCN) -- 3 meter     6006          40           Both      Yes  No
 (SPCN) -- 15 meter    6007          70           Both      Yes  No
 (SPCN) -- 6 meter     6008          50           Both      Yes  No
 (SPCN) -- 30 meter    6029          90           Both      Yes  No
IBM 80/160 GB          6120       2,495           Support   Yes
 Internal Tape Drive
 with VXA Technology
PCI Universal          6204         541           Support   Yes
 Differential Ultra
 SCSI Adapter
2 Gigabit Fibre        6239       2,582           Support   Yes
 Channel PCI-X
 Adapter
36/72GB 4mm Internal   6258       2,495           Support   Yes
 Tape Drive
Quad Digital Trunk     6312       9,580           Both      Yes  No
 Telephony PCI Adapter
Power Cable --         6458          14           Both      Yes  No
 Drawer to IBM PDU,
 14-foot, 250V/10A
Power Cord
 (14-foot), Drawer     6460          14           Both      Yes  No
  to OEM PDU (125V,
  15A), Plug Type #4
 (14-foot), Drawer     6469          14           Both      Yes  No
  to OEM PDU, (250V,
  15A), United States,
  Plug Type #5
 (6-foot), To Wall     6470          14           Both      Yes  No
  (125V, 15A),
  Plug Type #4
 (9-foot), To Wall/    6471          14           Both      Yes  No
  OEM PDU, (125V, 15A),
  Plug Type #70
 (9-foot), To Wall/    6472          14           Both      Yes  No
  OEM PDU, (250V, 16A),
  Plug Type #18
 (9-foot), To Wall/    6473          14           Both      Yes  No
  OEM PDU, (250V,
  10A), Plug Type 19
 (9-foot), To Wall/    6474          14           Both      Yes  No
  OEM PDU, (250V,
  13A), Plug Type #23
 (9-foot), To Wall/    6475          14           Both      Yes  No
  OEM PDU, (250V,
  16A), Plug Type #32
 (9-foot), To Wall/    6476          14           Both      Yes  No
  OEM PDU, (250V,
  10A), Plug Type #24
 (9-foot), To Wall/    6477          14           Both      Yes  No
  OEM PDU, (250V,
  16A), Plug Type #22
 (9-foot), To Wall/    6478          14           Both      Yes  No
  OEM PDU, (250V,
  16A), Plug Type #25
 (6-foot), To Wall,    6487          14           Both      Yes  No
  (250V, 15A), United
  States, Plug Type #5
 (9-foot), To Wall/    6488          40           Both      Yes  No
  OEM PDU, (125V,
  15A or 250V, 10A),
  Plug Type #2
 (9-foot), To Wall/    6493          14           Both      Yes  No
  OEM PDU, (250V,
  10A), Plug Type #62
 (9-foot), To Wall/    6494          14           Both      Yes  No
  OEM PDU, (250V,
  10A), Plug Type #69
 (9-foot), To Wall/    6495          14           Both      Yes  No
  OEM PDU, (250V,
  10A), Plug Type #73
 (9-foot), To Wall/    6496          14           Both      Yes  No
  OEM PDU, (250V,
  10A), Plug Type #66
Ultra320 SCSI 4-Pack   6574         244    61     Both      Yes  No
DASD Locking Kit       6585          10           Both      Yes  No
Acoustic Option --     6587          54           Both      Yes  No
 Rear Muffler
Ultra320 SCSI 4-Pack   6594         250    61     Both      Yes  No
 for Disk Mirroring
Disk Slot Fillers      6598          45           Both      Yes  No
 (Quantity 4)
Power Cord
 (9-foot), To Wall/    6651          14           Both      Yes  No
  OEM PDU, (125V,
  15A), Plug Type #75
 (9-foot), To Wall/
  OEM PDU, (250V,      6659          14           Both      Yes  No
  15A), Plug Type #76
 (14-foot), Drawer     6660          14           Both      Yes  No
  To OEM PDU (125V,
  15A), Plug Type #59
  (DENAN marking)
 (14-foot), Drawer     6669          14           Both      Yes  No
  to OEM PDU, (250V,
  15A), Plug Type #57
  (DENAN marking)
 (6-foot), To Wall     6670          14           Both      Yes  No
  (125V, 15A), Plug
  Type #59 (DENAN
  marking)
 (9-foot), Drawer      6671          14           Both      Yes  No
  to IBM PDU,
  250V/10A
 (5-foot), Drawer to   6672          14           Both      Yes  No
  IBM PDU, 250V/10A
 (9-foot), To Wall/    6680          14           Both      Yes  No
  OEM PDU, (250V,
  10A), Plug Type #6,
  Insulated
 (6-foot), To Wall,    6687          14           Both      Yes  No
  (250V, 15A), Plug
  Type #57 (DENAN
  marking)
IBM Rack-mount Drawer  7160          75           Both      Yes  No
 Rail Kit
OEM Rack-mount Drawer  7161          75           Both      Yes  No
 Rail Kit
IBM Deskside Cover     7184         150           Both      Yes  No
 Set
IBM Acoustic Deskside  7185         350           Both      No   No
 Cover Set
IBM Rack-mount Drawer  7190          75           Both      Yes  No
 Bezel and Hardware
OEM Acoustic Deskside  7193         350           Both      No   No
 Cover Set
AAP Software           7305          NC           Initial
 Pre-Install Indicator
One Processor          7320       1,720           Both      Yes  No
 Entitlement for
 Processor Feature
 #8330
Ethernet Cable, 6M,    7801          12           Both      Yes  No
 Hardware Management
 Console to
 System Unit
Ethernet Cable, 15M,   7802          26           Both      Yes  No
 Hardware Management
 Console to
 System Unit
OEM Rack-mount Drawer  7873          75           Both      Yes  No
 Bezel and Hardware
Media Backplane        7877         120           Both      Yes  No
OEM Deskside Cover     7916         150           Both      Yes  No
 Set
Advanced POWER         7940         590           Both      Yes  No
 Virtualization
128-Port Asynchronous
 Controller Cable,
 4.5 Meter             8131          50           Both      Yes  No
 23cm (9-Inch)         8132          33           Both      Yes  No
RJ-45 to DB-25         8133         100           Both      Yes  No
 Converter Cable
Rack-Mountable         8136       2,083           Support   Yes
 Remote Asynchronous
 Node 16-Port
 EIA-232
Enhanced Remote        8137       1,329           Support   Yes
 Asynchronous Node
 16-Port EIA-232
Tie-down Strap         8227          59           Both      Yes  No
 Security Device
Audio PCI Adapter      8244          29           Support   Yes
 for Workstations
2-way 1.9 GHz POWER5+  8330       4,675    37     Initial
 Processor Card,
 
 36 MB L3 Cache
Zero-priced Express    8410           0           Both      Yes  No
 Product Offering
 Processor
 Entitlement for
 #8330
Quiet Touch Keyboard
 USB, Business Black,
  U.S. English, #103P  8800          83           Both      Yes  No
  French, #189         8801          83           Both      Yes  No
  Italian, #142        8802          83           Both      Yes  No
  German/Austrian,     8803          83           Both      Yes  No
   #129
  U.K. English, #166   8804          83           Both      Yes  No
  Spanish, #172        8805          83           Both      Yes  No
  Japanese, #194       8806          83           Both      Yes  No
  Brazilian/           8807          83           Both      Yes  No
   Portuguese, #275
  Canadian French,     8808          83           Both      Yes  No
   #058
  Belgian/Dutch,       8810          83           Both      Yes  No
   #120
  Swedish/Finnish,     8811          83           Both      Yes  No
   #153
  Danish #159          8812          83           Both      Yes  No
  Bulgarian, #442      8813          83           Both      Yes  No
  Swiss/French/        8814          83           Both      Yes  No
   German, #150F/G
  Norwegian, #155      8816          83           Both      Yes  No
  Dutch, #143          8817          83           Both      Yes  No
  Portuguese, #163     8818          83           Both      Yes  No
  Greek, #319          8819          83           Both      Yes  No
  Hebrew, #212         8820          83           Both      Yes  No
  Hungarian, #208      8821          83           Both      Yes  No
  Polish, #214         8823          83           Both      Yes  No
  Slovakian, #245      8825          83           Both      Yes  No
  Czech, #243          8826          83           Both      Yes  No
  Turkish, #179        8827          83           Both      Yes  No
  LA Spanish, #171     8829          83           Both      Yes  No
  Arabic, #238         8830          83           Both      Yes  No
  Korean, #413         8833          83           Both      Yes  No
  Chinese/U.S., #467   8834          83           Both      Yes  No
  French               8835          83           Both      Yes  No
   Canadian, #445
  Thai, #191           8836          83           Both      Yes  No
  Russian, #443        8838          83           Both      Yes  No
  Yugoslavian/         8839          83           Both      Yes  No
   Latin, #105
  U.S. English         8840          83           Both      Yes  No
  (EMEA), #103P
Mouse -- Business      8841          62           Both      Yes  No
 Black with Keyboard
 Attachment Cable
Southern Hemisphere    9004           0           Both      Yes  No
 Designator for
 Monitors
Express Product        9568          NC           Initial
 Offering 91311K5
 Offering 91311K6      9569          NC           Initial
Language Group
 Specify --
  U.S. English         9300          NC           Initial
  Dutch                9700          NC           Initial
  French               9703          NC           Initial
  German               9704          NC           Initial
  Polish               9705          NC           Initial
  Portuguese           9707          NC           Initial
  Spanish              9708          NC           Initial
  Italian              9711          NC           Initial
  Canadian French      9712          NC           Initial
  Japanese             9714          NC           Initial
  Traditional          9715          NC           Initial
   Chinese (Taiwan)
  Korean               9716          NC           Initial
  Turkish              9718          NC           Initial
  Hungarian            9719          NC           Initial
  Slovakian            9720          NC           Initial
  Russian              9721          NC           Initial
  Simplified           9722          NC           Initial
   Chinese (PRC)
  Czech                9724          NC           Initial
  Romanian             9725          NC           Initial
  Slovenian            9727          NC           Initial
5
Minimum monthly maintenance charge

For ServiceElect (ESA) maintenance service charges, contact IBM Global Services at 888-IBM-4343 (426-4343).
 
Back topBack to top
 

Order now

To order, contact the Americas Call Centers, your local IBM representative, or your IBM Business Partner.

To identify your local IBM representative or IBM Business Partner, call 800-IBM-4YOU (426-4968).

 Phone:     800-IBM-CALL (426-2255)
 Fax:       800-2IBM-FAX (242-6329)
 Internet:  ibm_direct@vnet.ibm.com
 Mail:      IBM Americas Call Centers
            Dept:  IBM CALL, 11th Floor
            105 Moatfield Drive
            North York, Ontario
            Canada M3B 3R1
 
 Reference: YE001

The Americas Call Centers, our national direct marketing organization, can add your name to the mailing list for catalogs of IBM products.

Note: Shipments will begin after the planned availability date.

Trademarks

 
OpenPower, POWER, Micro-Partitioning, AIX 5L, POWER5+, HACMP, EIA, Electronic Service Agent, ServiceSuite, and SystemSeller are trademarks of International Business Machines Corporation in the United States or other countries or both.
 
WebSphere, DB2 Universal Database, eServer, PartnerWorld, AIX, pSeries, and TotalStorage are registered trademarks of International Business Machines Corporation in the United States or other countries or both.
 
Linux is a trademark of Linus Torvalds in the United States, other countries or both.
 
ThinkVision is a registered trademark of Lenovo in the United States, other countries, or both.
 
Other company, product, and service names may be trademarks or service marks of others.

Back to topBack to top
 

 
Printable version Printable version