|
IBM United States
Hardware Announcement 101-101 April 17, 2001
IBM
|
pSeries 660 Model 6H1 Brings Enhanced Performance to
64-bit, Mid-Range Rack SMP Servers
 ENUS101-101.PDF (163KB)
|
At a Glance
The pSeries 660 Model 6H1 delivers a cost-efficient growth path to the future through such attributes as:
-
64-bit system scalability with the following processor options:
- 1-way 450 MHz RS64 III with 2 MB L2 cache
- 1-way 600 MHz RS64 IV with 2 MB L2 cache
- 2-way 450 MHz RS64 III with 4 MB L2 cache per processor
- 2-way 600 MHz RS64 IV with 4 MB L2 cache per processor
- 4-way 450 MHz RS64 III with 4 MB L2 cache per processor
- 4-way 600 MHz RS64 IV with 4 MB L2 cache per processor
- 6-way 668 MHz RS64 IV with 8 MB L2 cache per processor
-
Expandability and reliability
- System memory expandable from 256 MB to 32 GB
- Rack-mounted CEC and I/O drawers
- Up to two I/O drawers per server
- CEC Drawer utilizes 5U (EIA Units) rack space
-
I/O drawers utilize 5U rack space with each providing:
- 14 available hot-plug PCI bus slots
- Two media bays
- Support for SCSI, SSA, and Fibre Channel attached storage systems
- Support for 32-bit and 64-bit applications
- AIX Version 4.3.3 or 5.1 license included
For ordering, contact:
Your IBM representative, an IBM Business Partner, or IBM Americas Call Centers at 800-IBM-CALL (Reference: RE001).
Overview
The IBM 
pSeries 660 Model 6H1 (7026-6H1) is the latest
member of the 64-bit family of symmetric multiprocessing (SMP) servers
from IBM. It gives you tools for managing e-business, new application
flexibility, and advanced technology, all designed to help you capitalize
on the e-business revolution.
The pSeries 660 Model 6H1 offers an innovative design that makes it ideal for mission-critical ERP/SCM, Data Warehouse/Data Mart, OLTP, and e-business applications. It blends copper silicon-on-insulator technology and larger memory capacity with a proven system architecture to give you reliability you can count on. Scalability is enhanced by increasing the amount of memory to 32 GB, by leveraging the enhancements of AIX® Version 5.1, and the options of server clustering or SP™ attachment within your enterprise.
Combined with an outstanding array of industry software and services, the Model 6H1 is a cost-efficient growth path to the future. It provides 64-bit scalability via the 64-bit RS64 III and IV processors packaged in 1-, 2-, 4-, and 6-way processor configurations and incorporates an I/O subsystem supporting 32-bit and 64-bit standard PCI adapters. The Model 6H1 has 1-, 2-, and 4-way processors that operate at 450 MHz or 600 MHz while the 6-way processor operates at 668 MHz. The L2 cache per processor is 2 MB for the 1-way processors, 4 MB for the 2- and 4-way processors, and 8 MB for the 6-way processor.
The pSeries 660 Model 6H1 is packaged as a rack-mounted Central Electronics Complex (CEC) drawer, cable-attached to rack-mounted Remote I/O (RIO) drawers. The CEC and I/O drawers offer redundant power options and redundant cooling. The CEC drawer incorporates the system processors, memory, and supporting systems logic.
System storage is provided via remotely attached SCSI, SSA, or Fibre Channel storage subsystems. A fully configured pSeries 660 Model 6H1 system includes:
- One 6-way processor card with 8 MB L2 cache per processor
- 32 GB of system memory
-
Two I/O drawers incorporating:
- 28 available hot-plug PCI slots
- Three available media bays
The pSeries 660 Model 6H1 CEC and I/O drawers are mounted in the IBM 7014 rack. Additional space in the 7014 rack may be utilized for various storage and communications subsystems.
AIX Version 4.3.3 or 5.1 software is included with every pSeries 660 Model 6H1 and can be preinstalled.
IBM anticipates that there will be 64-bit Linux distributions available second half 2001 for the pSeries 660 Model 6H1.
Key Prerequisites
- AIX Version 4.3.3 with 4330-08 maintenance package, or later, or AIX 5L Version 5.1, or later
- Must be installed in your new or existing IBM 7014 rack or existing 7017 with feature 7000 or 7036, or 7037 I/O rack
Description
IBM e(logo)server pSeries 660 Model 6H1
The pSeries 660 Model 6H1 provides outstanding performance and supports the evolution of your enterprise to Web integration and 64-bit computing. Its outstanding benefits include:
-
Excellent commercial performance in 1-, 2-, 4-, or 6-way enterprise
servers using the RS64 III and IV microprocessor technology.
-
Excellent reliability, availability, and serviceability (RAS) providing:
- Error checking and correcting (ECC) system memory and cache
- I/O link failure recovery
- Environmental sensing
- N+1 Power
- N+1 Cooling units
- Service processor for integrated system monitoring
- Concurrent diagnostics
-
Preconfigured tailored solutions that take advantage of the rack
packaging to custom tailor your solution. Choose from multiple SCSI,
SSA, or Fibre Channel attached:
- Storage
- Media
- Communication
-
Open industry standards, such as Open Firmware based on IEEE P1275
standard.
-
Processor and memory growth. The minimum configuration 1-way processor
can be increased to a 2-way, 4-way, or 6-way SMP. Memory can be expanded
up to 32 GB in 256 MB, 512 MB, 1 GB, or 2 GB increments.
-
Industry-standard, hot-plug PCI slots that allow most PCI adapters to be
removed, added, or replaced without powering down the system. This
function enhances system availability and serviceability.
-
System power supplies available in ac or dc and designed to support up to
6-way SMP systems with 16 GB of memory. An optional modular ac
power supply can be added to provide redundant power for ac systems.
Redundant power is standard on systems with dc power.
- Industry-recognized AIX operating system license included with each system. New performance enhancements and Workload Management features are included with the latest release.
-
Primary I/O drawer that features:
- Two integrated SCSI controllers (F/W and Ultra2)
- An Ethernet 10/100 controller
- Four serial ports
- One parallel port
- Keyboard and mouse ports
These are standard on the system and are made available without utilizing any of the expansion slots provided.
-
Robust industry-standard PCI subsystem supporting 32-bit and 64-bit
adapters. Greater application throughput is achieved via independent PCI
buses for each of the 14 PCI slots in the I/O drawer. This design
provides up to 1 GBps aggregate bandwidth per drawer, depending on system
configuration. The Model 6H1's independent PCI busses are designed
to enhance reliability by isolating adapters from other adapters within
the drawer.
-
A high-performance ECC L2 cache per processor of:
- 2 MB on the 1-way processors
- 4 MB on the 2- and 4-way processors
- 8 MB on the 6-way processor
- RAID support available for SCSI and SSA. The operating system provides RAID 0 and 1. The optional SCSI and SSA RAID adapters provide RAID level 0, 1, and 5.
RAS Features and Functions
Excellent quality and reliability are inherent in all facets of IBM
pSeries products. The measures taken help the products to perform
reliably, efficiently handle infrequent failures in a nondisruptive
fashion, and provide timely and competent repair allowing resumption of
operations with minimal inconvenience. Reliability begins with the
development of architectures, where RAS innovations are of paramount
importance. It flows through design and product development stages,
where RAS designs are reviewed, assessed, developed, evaluated, and
optimized. It continues through the manufacturing and release processes,
where the manufacturing quality is extensively measured and evaluated.
It culminates in service and support, where:
- Reliability is consistently monitored for deviation from the criteria.
- Warranty and maintenance have high priority.
- Significant customer problems are assigned to and addressed by an expert team.
pSeries system processes, from the architectural and concept phases of development through the provision of service and support, are ISO-certified and audited periodically for ISO compliance by representatives of Underwriters Laboratories.
Reliability — Fault Avoidance: Major effort has been spent on the development of the pSeries 660 Model 6H1 system to analyze single points-of-failure within the CEC (comprised of the processors, memory, and the I/O interface) and to either eliminate them or to provide hardening capabilities to significantly reduce the probability of failure. The best way to harden a system is to prevent errors from occurring. Components within the CEC were selected to provide "server" levels of reliability. These components provide the highest levels of reliability available within IBM and undergo additional stress testing and screening. During the design and development process, subsystems go through rigorous verification and integration testing processes. During system manufacturing, systems again go through a thorough testing process in pursuance of the highest product quality level.
Extensive error detecting and checking circuitry is included so that most infrequent component failures are recognized and corrected automatically or properly reported for isolation and repair, thus preserving the integrity of data stored and transported in the system. Hardware and software failures are recorded in the AIX log facility and analyzed by error log analysis (ELA) routines to provide information to the system administrator on the causes of system problems. This also enables IBM service representatives to bring along needed replacement hardware components when a service call is placed, thus minimizing system repair time.
DASD Predictive Failure Analysis® (PFA) provides the ability to detect an imminent disk failure and report the findings through the AIX log. Then the disk can be replaced either immediately or at a later scheduled time, depending on the configuration of the DASD subsystem. With the RAID controller and the DASD hot-plug design, normal operation can usually continue in the presence of a failed disk and a concurrent repair often can be performed while the application continues uninterrupted.
Availability — Backup and Replication: The pSeries 660 Model 6H1 brings new levels of availability features and functions to the Enterprise Server. The optional N+1 power subsystem provides redundancy in case of power supply failure. Hot-plugged power supplies in the CEC and I/O drawers allow concurrent repair when redundant power is installed. Optional uninterruptible power supply (UPS) systems are supported for this system.
The Model 6H1's CEC and I/O drawer cooling subsystems have N+1 fans, which can be replaced concurrently if the optional redundant power is installed.
Systems equipped with optional redundant power have independent line cords for each power supply in the CEC and I/O drawers.
Constant power monitoring hardware assists in detection of early loss of source power and notifies the operating system to effect an orderly shutdown. This same power monitoring hardware is designed to detect the loss of redundant bulk power supplies, regulators, fans, and blowers and report them to the operating system for logging in the system error log and for notification for deferred maintenance.
The Model 6H1's enhanced service processor is functional in standby mode and does not require a functional system for operation. This function provides enhanced RAS by not requiring AIX to be operational for interfacing with a remote system administrator or Electronic Service Agent™.
The Model 6H1 uses AIX online (concurrent) diagnostics with error log analysis and service aids, which allow administrators or IBM service representatives to diagnose many potential system malfunctions without interrupting end-user operation.
Auto-restart options, when enabled, are designed to reboot the system automatically following:
- Unrecoverable software error
- Software hang
- Hardware failure
- Environmentally induced (ac power) failure
These standard, high-availability features coupled with the optional High Availability Cluster Multi-Processing (HACMP) program provide unmatched availability in the UNIX® marketplace.
Chipkill™ Memory: The pSeries 660 Model 6H1 offers Chipkill Memory with selected memory options. Using advanced technology derived from IBM's ultra-reliable System/390® enterprise servers, Chipkill Memory protects the server from any single memory chip failure and multi-bit errors from any portion of a single memory chip.
Memory chip failures can cause server system crashes that can result in the permanent loss of business data. Many file server applications lack the means to recover data after a catastrophic failure of this kind. Even when recovery is possible, it can take hours — resulting in significant losses in productivity or revenue.
Chipkill DIMMs for the Model 6H1 provide the self-contained capability to correct real-time, multi-bit DRAM errors, including complete DRAM failures. This "RAID for memory" technology provides enhanced multi-bit error detection and correction that is transparent to the system.
Serviceability — Correcting Faults: The pSeries 660 Model 6H1 product is designed to be installed and maintained by a trained service representative.
Functions can be performed remotely such as:
- Power-on and power-off
- Reading the service processor error logs and POST error logs
- Reading vital product data (VPD)
- Accessing NVRAM
You can also enable console mirroring to monitor remote activity.
Microcode Discovery Service: Microcode Discovery Service is a service that allows you to determine if your pSeries 660 Model 6H1 is at the latest microcode level. Using a secure Internet connection and a Web browser, Microcode Discovery Service can capture the machine data and generate a real-time comparison report showing subsystems that may need to be updated.
To accomplish this, you must install the service tool onto your system. This tool, Inventory Scout, will run as a daemon on the server. The tool will create a file containing the current level of all microcode (adapters, devices, system, and support processor) levels in the system. This file will be used to compare the system level codes against the latest available levels on the IBM Web site. You will then receive a report notifying you of any new updates available along with a link from which the microcode can be downloaded.
This service allows you to maintain the Model 6H1 microcode at the
latest levels to obtain peak performance. This service is available to
customers through the Worldwide Support Centers.
Electronic Service Agent
Electronic Service Agent capability is shipped with every pSeries 660 Model 6H1 system. Electronic Service Agent requires a modem to dial for service.
The Electronic Service Agent:
- Monitors and analyzes system errors, and if needed, can place a service call to IBM automatically
- Reduces the effect of business disruptions due to unplanned system outages and failures
- Performs problem analysis on a subset of hardware-related problems and, with customer authorization, reports automatically the results to IBM Service
Service Support:
Hardware service requests go to IBM's remote support center for
initial problem diagnosis. This approach gives you direct access to
skilled specialists. These specialists can either solve the problem over
the phone or help get it resolved as quickly as possible. They are
backed up by a highly-trained product engineering team to assist in
problem identification and resolution.
Euro Currency
This product is not impacted by euro currency.
Product Positioning
The pSeries 660 Model 6H1 consists of a rack-mounted CEC drawer containing the processors and memory connected to another rack-mounted drawer containing the media, hot-plug I/O slots, and optional boot bays. Both drawers have redundant power options and redundant cooling. The incorporation of hot-plug PCI I/O slots brings new and increased levels of availability for this system. The need to power down and reboot when adding or replacing most PCI adapters is eliminated, thus reducing time delays while keeping network and application processing up and running. The Model 6H1 system can accommodate 1 processor module in its smallest configuration and grow to 2, 4, or 6 processors as required, offering outstanding scalability as your business needs dictate.
The Model 6H1 is targeted at the key commercial processing segments of e-business, ERP, SCM, and Business Intelligence. In each segment, the Model 6H1 can meet critical requirements. For example:
- In ERP, the Model 6H1 is an excellent application server with its powerful processors, memory capacity, and optional data storage capability.
- In e-business, the Model 6H1 can serve as a fast, highly-reliable, business-to-business Web server, going to other systems for business data or hosting the data storage itself.
The Model 6H1's rack-mounted drawer configuration offers flexibility regarding the number of CEC and I/O drawers that can be mounted in the rack, providing more compute and I/O power per square foot of valuable floor space. The Model 6H1 CEC and I/O drawers each require 5U (EIA Units) of rack space. Thus, a Model 6H1 configuration requires only 10U of rack space. This configuration, which consists of one CEC drawer and one I/O drawer, provides 14 available hot-plug PCI slots with up to six processors and 32 GB of memory.
External disk storage is required for the Model 6H1 as data storage internal to the drawers is not provided; however, optional boot bays are available in the primary I/O drawer. (The internal boot disk option requires the space of 2 PCI slots, leaving 12 available.) Memory in the CEC drawer can expand up to 32 GB, providing ample operating performance for demanding applications.
Other reliability functions help to make the Model 6H1 very competitive. Its CPU de-allocation function enables the system to take a failing processor offline without rebooting the system in the remote possibility that a failure should occur. The service processor can record this action and notify the systems administrator or service personnel of the condition. Computing operation continues with the processor deactivated, allowing repair to be scheduled at a time convenient to your processing schedule. Hot-plug functionality of the PCI I/O subsystem brings new levels of up-time to your system for the replacement or addition of I/O adapters. The design of this function shows a concern for the usability, convenience, and safety for the customer who performs this task. Selective disablement of an adapter can be made as necessary while system operations not dependent on this adapter continue to run without being affected. AIX assists the user by guiding him through the process, helping to ensure success. In addition, an HACMP packaged solution with dual Model 6H1 systems will be offered to provide industry-leading high availability.
The Model 6H1 performs its role as the entry, rack-based platform of the pSeries family of SMP servers by complementing the deskside pSeries 620 Model 6F1, the mid-sized rack-based 7017-M80, and the pSeries 680 Model S85 in this broad server lineup.
As a member of the pSeries family, the pSeries 660 Model 6H1 will continue to meet your ever growing needs for more performance, scalability, and availability.
Statement of General Direction
IBM plans to make available a pSeries follow-on server to the RS/6000® Model M80 in the second half of 2001. To help protect customers' investment in RS/6000 Model M80 servers, IBM also intends to provide processor upgrade offerings for the RS/6000 Model M80 that are expected to deliver performance equivalent to the new pSeries system.
All statements regarding IBM's future direction and intent are subject to change or withdrawal without notice, and represent goals and objectives only.
Reference Information
Refer to Hardware Announcement
101-100
, dated April 17, 2001 (IBM pSeries 620 Model 6F1 Brings
Faster 64-bit Computing to 6-Way Deskside Servers).
Refer to Software Announcement 201-090 , dated April 17, 2001 (AIX 5L Version 5.1 Advanced UNIX Operating System with Linux Affinity Delivers the Most Powerful and Flexible Choice for e-business and Enterprise Servers).
Trademarks
IBM e(logo)server Advantage Tools
The wide variety of benefits and services provided by the IBM
Advantage Tools are available for the pSeries 660 Model 6H1. These
tools give you a variety of offerings to help you choose and implement
the technology solutions right for your business needs, assure
performance and availability levels of your solution, and finance your
companies server investment.
-
The planning, financing, and purchasing experience for the pSeries 660
Model 6H1 is enhanced through IBM Financing Advantage and IBM
Capacity Advantage.
-
The IBM Solutions Assurance Advantage offerings, coupled
with the range of solution offerings through IBM
solution offerings, provide assistance in solution assessment, selection,
testing, and implementation to meet the initial and ongoing needs of your
e-business environment.
-
The IBM Customer Care Advantage and IBM
Availability Advantage provide tools to meet your educational needs as
well as initial and ongoing support offerings to enhance your e-business
experience. Included are offerings such as, High Availability Services,
Web-based technical support, availability assessment, and remote service
capability.
Publications
The following publications are shipped with the pSeries 660. Additional copies are available. To order, contact your IBM representative.
Order
Title Number
pSeries 660 Installation Guide SA38-0575
System Unit Safety Information SA23-2652
PCI Adapter Placement Reference SA38-0538
Refer to the Related Publications section of the pSeries 660 Installation Guide for information regarding other available pSeries 660 publications or on the Web, visit:
The following publications are available for a fee:
Order
Title Number
pSeries 660 Installation Guide SA38-0575
pSeries 660 User's Guide SA38-0565
pSeries 660 Service Guide SA38-0566
Order
Title Number
Diagnostic Information for SA38-0509
Multi Bus Systems
Adapters, Devices and Cable SA38-0516
Information
PCI Adapter Placement Reference SA38-0538
The Publication Notification System (PNS) is available by order number/product number. Customers currently subscribing to PNS will receive automatically notifications by e-mail. Customers who want to subscribe can visit the PNS Web site location at:
The publications listed on the notification can be ordered by calling the Publications Support Group in Raleigh at 800-879-2755, option 1.
Technical Information
-
Central Electronics Complex
- Width: 445 mm (17.5 in)
- Depth: 820 mm (32.3 in)
- Height: 218 mm (8.6 in) — 5 EIA units
-
Weight:
- 41 kg (90 lb) (minimum configuration)
- 52 kg (115 lb) (maximum configuration)
-
I/O Drawer
- Width: 445 mm (17.5 in)
- Depth: 820 mm (32.3 in)
- Height: 218 mm (8.6 in)
-
Weight:
- 41 kg (90 lb) (minimum configuration)
- 52 kg (115 lb) (maximum configuration)
- Temperature: 10° to 40°C (50° to 104°F)
- Relative humidity: 8% to 80%
- Maximum wet bulb: 27°C (80.6°F)
-
Noise level:
- Sound power (CEC): 5.8 Bels Idle/Operating
- Sound pressure (CEC): 45 dBa Idle/Operating
- Sound power (CEC and I/O drawer): 6.2 Bels Idle/Operating
- Sound pressure (CEC and I/O drawer): 48 dBa Idle/Operating
-
CEC
- Operating voltage: 200 to 240 V ac 50 to 60 Hz
- Electrical output: 300 watts (typical); 450 watts (maximum)
-
Power source loading:
- 0.32 kVA (typical configuration)
- 0.48 kVA (maximum configuration)
-
Thermal output:
- 300 joules/sec (1,025 Btu/hr, typical configuration)
- 450 joules/sec (1,536 Btu/hr, maximum configuration)
-
I/O Drawer
- Operating voltage: 200 to 240 V ac 50 to 60 Hz
- Electrical output: 220 watts (typical); 515 watts (maximum)
-
Power source loading:
- 0.23 kVA (typical configuration)
- 0.54 kVA (maximum configuration)
-
Thermal output:
- 220 joules/sec (750 Btu/hr, typical configuration)
- 511 joules/sec (1,750 Btu/hr, maximum configuration)
EMC Conformance Classification: This equipment is subject to FCC rules and it shall comply with the appropriate FCC rules before final delivery to the buyer or centers of distribution.
- U.S. — FCC CFR47 Part 15 Class A
- Europe — CISPR 22 Class A; "CE" Mark of Conformity
- Japan — VCCI-1
- Korea — Korean Requirement Class A
Homologation: Telecom Environmental Testing (Safety and EMC): Homologation approval for specific countries has been initiated with the IBM Homologation and Type Approval (HT&A) organization in LaGaude.
This pSeries model and applicable features meet the environmental testing requirements of the country TELECOM and have been designed and tested in compliance with the Full Quality Assurance Approval (FQAA) process as delivered by the British Approval Board for Telecom (BABT), the U.K. Telecom Regulatory authority.
Product Safety/Country Testing/Certification
- U.S.: UL
- Canada: CNL (CSA or cUL)
- Germany/Europe: GS Mark (Safety, TUV, EN60 950)
General Requirements
The pSeries 660 Model 6H1 is in compliance with IBM Corporate
Bulletin C-B 0-2594-000 Statement of Conformity of IBM Product to
External Standard (Suppliers Declaration).
Hardware Requirements
The pSeries 660 Model 6H1 must be installed in a new or existing RS/6000® 7014 rack or in an existing 7017 with feature number 7000, 7036, or 7037 rack. This assures proper dimensions, mounting surfaces, power distribution, ventilation, stability, and other functional requirements are met. The recommended rack is the RS/6000 7014 Model T00.
Either an ASCII terminal with an attachment cable or a graphics display with an attachment cable and graphics adapter is required for initial set up and must be available locally for service. If an ASCII terminal is used, it must be attached through a serial port.
If a graphics adapter is installed, console messages (IPL progress/error information/systems management information) will be directed to the graphics adapter. The system does not detect if a display is attached to the adapter. The user may attach any supported device to the adapter.
If a graphics adapter is not installed, console messages will be directed to serial port S1 or S2. The system does not detect if an ASCII console is attached to serial port S1 or S2; use of any device other than an ASCII console on serial port S1 or S2 will result in lost messages and unpredictable results on that device.
pSeries 660 Model 6H1 — Minimum System Configuration: The pSeries 660 Model 6H1 is based on a flexible, modular design that can be configured up to:
- 6 processors
- 32 GB of system memory
- 28 PCI slots
- Multiple media devices, as desired
This flexibility is available through the many optional features for the pSeries 660. Each pSeries 660 Model 6H1 system must include a minimum of the following items:
-
One pSeries 660 Model 6H1 system CEC enclosure (5EIA) with the
following:
- One — ac or dc Power Specify (#9172 or #9175)
- One — Language Group Specify (#9XXX)
- One — Power Cord Specify (#9XXX)
-
One — Processor Card — choose from:
- One — RS64 III, 1-Way, 450 MHz, 2 MB L2 Cache (#5201)
-
One — RS64 IV, 1-Way, 600 MHz, 2 MB L2 Cache (#5211)
Note: Feature 5201 and 5211 each includes 8 memory DIMM slots.
- One — RS64 III, 2-Way SMP, 450 MHz, 4 MB L2 Cache (#5202)
- One — RS64 IV, 2-Way SMP, 600 MHz, 4 MB L2 Cache (#5212)
- One — RS64 III, 4-Way SMP, 450 MHz, 4 MB L2 Cache (#5204)
- One — RS64 IV, 4-Way SMP, 600 MHz, 4 MB L2 Cache (#5214)
- One — RS64 IV, 6-Way SMP, 668 MHz, 8 MB L2 Cache (#5216)
-
256 MB Memory (minimum) — choose from:
- 256 MB Memory (2 x 128 MB DIMMs) (#4110)
- 512 MB Memory (2 x 256 MB DIMMs) (#4119)
- 1024 MB Memory (2 x 512 MB DIMMs) (#4100)
-
2048 MB Memory (2 x 1024 MB DIMMs) (#4137)
and - One — 16-Position Memory Board (#4075) (not required if #5201 or #5211 processor ordered)
-
Cabling for connection to the primary I/O drawer
- Two — Remote I/O Cable — CEC to I/O Drawer (#3142, #3143, or #3144)
- One — CEC to Primary I/O Drawer Power Control Cable (#6132 or #6136)
- One — System Control and Initialization Cable (#5992 or #5993)
-
One Primary I/O Drawer including:
- I/O Drawer, 5-EIA, (#6324)
- 32x (Maximum) SCSI-2 CD-ROM Drive (#2624)
Additional optional features may be added, as desired.
pSeries 660 Model 6H1 — HA Solution Configuration: The pSeries 660 Model 6H1 HA solution package must include a minimum of the following hardware and software, which must be ordered together as specified to qualify for the pSeries 660 Model 6H1 HA package price.
-
Two — pSeries 660 Model 6H1 Enterprise Servers, each
incorporating:
- One — Central Electronics Complex
- One — Primary I/O Drawer and Attachment Cabling
- One — HA Solution Indicator (#0700)
-
One — HA Solution Processor Card — choose from:
-
One — HA Solution Processor Card, 4-Way (#0511)
or - One — HA Solution Processor Card, 6-Way (#0512)
-
One — HA Solution Processor Card, 4-Way (#0511)
- 512 MB Memory
- Two — PCI SSA Adapters
- Two — LAN Adapters
- One — Redundant CEC AC Power Supply (#6282)
- One — Redundant I/O Drawer AC Power Supply (#6283)
-
One — Serial-to-Serial Port Cable for Drawer/Drawer (#3124)
Note: Only one serial cable (#3124) is needed for the two pSeries 660 servers. Redundant dedicated heartbeat and messaging paths required via LAN and Async ports on each server.
-
One — Software Preinstall (#5005)
Note: Redundant SSA or SCSI IPL disks are required. AIX® and HACMP software will be preinstalled on 7133 SSA disks unless optional SCSI disks are ordered.
- One — AIX Version 4.3.3, or later, or AIX 5L Version 5.1, or later, license
-
One — HACMP Version 4.4, or later, license
HACMP requires APAR IY17684 to support AIX Version 5.1.
Note: Additional optional Model 6H1 features may be added.
-
One — 7014-T00 System Rack including:
- Two — Rack Content Specify: 7026-6H1 (#0188)
- Two — Rack Content Specify: I/O Drawer (#0176)
- One — Rack Content Specify: 7133-D40 (#0156)
- One — Power Distribution Unit, Side Mount (#6171, #6173, or #6174)
Note: Additional optional 7014-T00 features may be added.
-
One — 7133-D40 Serial Disk System including:
- Four — SSA Disk Drives
- Six — Advanced SSA Cables
- One — Manufacturing Integration Code (Rochester = #0987, Dublin = #0970)
Note: Additional optional 7133-D40 features may be added.
Software Requirements
AIX Version 4.3.3 with 4330-08 maintenance package, or later, or AIX 5L Version 5.1, or later, operating system
- The pSeries 660 Model 6H1 system contains one processor slot. Processor cards are available in 1-way, 2-way, 4-way, and 6-way configurations.
- Installed systems can increase the number of processors by replacing the existing processor card with a more powerful processor card via feature conversion. The existing processor card is returned to IBM after being replaced. (Refer to the Processor Feature Conversions — pSeries 660 Model 6H1 section for additional information.)
- The 1-way processor card provides eight memory DIMM positions. The 2-way, 4-way, and 6-way cards do not provide memory DIMM positions. (Refer to Memory section below.)
-
Chipkill™ Memory on the pSeries 660 Model 6H1 is available with
the following memory options:
- 512 MB (2 x 256 MB) memory (#4119)
- 1024 MB (2 x 512 MB) memory (#4100)
- 2048 MB (2 x 1024 MB) memory (#4137)
- The Model 6H1 must contain a minimum of 256 MB of system memory. Memory is expandable up to a maximum of 32 GB.
- Memory may be installed on the 1-way processor card or on 16-position memory boards.
- Memory DIMMs on the 1-way processor card must be installed in pairs. Memory DIMMs on the 16-position memory boards must be installed in quads. All DIMMs in each pair or quad must be the same capacity.
- A minimum of four memory DIMMs must be installed on each 16-position memory board.
- A maximum of two 16-position memory boards may be installed on systems containing 2-way, 4-way, or 6-way processor cards. The first memory board must be full before a second memory board can be ordered.
- No memory boards may be installed in a Model 6H1 system when memory DIMMs are mounted on the 1-way processor card. Systems containing the 1-way processor card with no memory DIMMs installed are limited to one 16-position memory board.
- Plans for future memory upgrades should be taken into account to obtain optimal performance without limiting future memory expansion.
- IBM recommends systems configured with 4 GB of memory or greater, to have access to a 4-mm or 8-mm tape drive for submission of system dump information, if required. This function may be accomplished via locally attached or network attached devices as appropriate.
- pSeries 660 Model 6H1 systems are available as either ac or dc-powered configurations. Specify feature numbers are used to indicate ac or DC-power for the CEC and the I/O drawer.
- Redundant power supplies are recommended but not required on ac-powered Model 6H1 configurations. The first power supply for the CEC and I/O drawer is incorporated in their basic design. A second power supply is available for each of these components to provide redundancy for enhanced system availability.
- Model 6H1 systems with redundant power must incorporate the redundant power supplies in the CEC drawer, primary I/O drawer, and secondary I/O drawer, if attached.
- Systems specifying DC power will include redundant power supplies in the CEC and the I/O drawer.
- System power can not be converted from ac-to-dc or dc-to-ac after shipment to the customer.
-
DC-powered pSeries 660 Model 6H1 systems operate at -48 V and
include redundant power supplies in the CEC and I/O drawers.
-
DC-powered Model 6H1 systems are supported only in the 7014-T00 rack
equipped with a dc power distribution panel (#6117).
Note: Feature number 6117 is a feature of the 7014-T00 rack.
-
Rack feature number 6117 provides the proper capacity circuit breakers
for use with the Model 6H1 system based on the inclusion of rack
feature number 0128 (Rack Content Specify, 7026-H80) on the 7014-T00 rack
order.
-
The 7014-T00 rack power distribution panel (#6117) provides attachment
for up to two Model 6H1 CEC drawers, two Model 6H1 I/O drawers,
and four 7133-D40 SSA drawers. Up to two dc-powered Model 6H1
systems can be mounted in each 7014-T00 rack equipped with feature number
6117.
- Rack power distribution panel configurations and capacities are unique to support model-specific system requirements. DC-powered pSeries 660 Model 6H1 systems may not be combined in racks with other dc-powered systems such as the 7026-H50, H70, or M80, but may be combined with a dc-powered 7026-H80 system.
- The pSeries 660 Model 6H1 system CEC and I/O drawers are packaged as rack-mounted devices and are supported in the 7014-T00, T42, and S00 racks. Existing 7014 racks or 7017 feature number 7000, 7036, and 7037 racks can be utilized for AC powered Model 6H1 systems, if sufficient space is available. When placed in an existing 7017 feature number 7000 rack, the maximum total of two 7017 I/O drawers and Model 6H1 systems in combination are allowed.
-
The maximum quantities of Model 6H1 systems supported in 7014 racks
are as follows (assumes one CEC drawer and one I/O drawer per
Model 6H1 system):
- 7014-T00 — maximum is 3
- 7014-T42 — maximum is 4
- 7014-S00 — maximum is 3
- The Model 6H1 CEC drawer must be placed a minimum of 5U (EIA Units) below the top of the rack for service purposes. I/O, tape, or storage subsystem drawers can be placed in the space above the Model 6H1 CEC drawer.
- The Model 6H1 I/O drawers may be placed at any location in the rack.
- Supported devices such as SCSI or SSA disk subsystems or tape subsystems may share the rack with the Model 6H1 system.
- The pSeries 660 Model 6H1 can accommodate up to two I/O drawers. The primary I/O drawer is required and an optional secondary I/O drawer can be ordered per system.
-
The Model 6H1 primary I/O drawer integrates the following functional
components:
- System support (service) processor
- Fourteen PCI slots
- Two media bays
- One 1.44 MB diskette drive (mounted behind a removable cover)
- Four serial ports
- One parallel port
- One 10/100 Ethernet port
- One keyboard port
- One mouse port
- One SCSI-2 F/W port for internal drawer components, such as, media devices and (optional) IPL disks
- One Ultra2 SCSI port for external attachment use
- The first media bay in the primary I/O drawer is reserved for the required CD-ROM or DVD-ROM. The second media bay may be utilized for any additional supported internal media device.
- One secondary I/O drawer can be added to pSeries 660 Model 6H1 systems equipped with RS64 IV processor features 5211, 5212, 5214, or 5216. The secondary I/O drawer provides 14 additional hot-plug PCI slots and two additional media bays.
- pSeries 660 Model 6H1 systems equipped with 450 MHz RS64 III processor features 5201, 5202, or 5204 require RPQ 8A1140 for attachment of the secondary I/O drawer. Refer to 8A1140 for a description of secondary I/O drawer and associated system and PCI adapter implications.
- Serial ports S1 and S2 are reserved for ASCII console and service processor support. Serial ports S3 and S4 are available for HA heartbeat and UPS support, if desired.
- Two 9-Pin to 25-Pin Serial Port Converter cables (equivalent to #3925) are provided with each Model 6H1 server. If additional converter cables are required, feature number 3925 should be ordered.
- The pSeries 660 Model 6H1 allows up to two I/O drawers to be attached to the system CEC drawer. It is recommended the I/O drawers be located in the same rack as the CEC drawer for service purposes; however, they can be mounted in separate racks, if desired.
- There are two remote I/O (RIO) ports available on the CEC. Port 0 is always connected to the primary (first) I/O drawer. This drawer contains the system service processor and native I/O interface.
-
I/O drawers are connected to the CEC drawer via the following cables:
- RIO cables for data transfer
- System Control and Initialization cable
- Power Control cables
- RIO cable connections are always made in loops to help protect against a single point-of-failure resulting from an open, missing, or disconnected cable. Model 6H1 systems with non-looped configurations could experience degraded performance and serviceability. If a non-loop connection is detected, a problem is reported.
- One available RIO loop supports up to two I/O drawers. A minimum of two RIO cables are required to attach the first I/O drawer on each RIO loop. A third drawer-to-drawer RIO cable is required to complete the loop when an additional I/O drawer is attached to the loop. RIO cables are available in various lengths (#3142 = 3 meters, #3143 = 6 meters, and #3144 = 15 meters) to attach I/O drawers within a single rack or across multiple racks, if desired.
- One System Control and Initialization cable (#5992 = 3 meters or #5993 = 6 meters) is required to connect the primary I/O drawer to the CEC.
- One CEC-to-Primary I/O Drawer power control cable (#6132 = 3 meters or #6136 = 6 meters) is required to connect the primary I/O drawer to the CEC.
- Power control for the secondary I/O drawer is provided from the primary I/O drawer via one loop. Two Power Control (SPCN) cables (#6006 = 3 meters, #6007 = 15 meters, or #6008 = 6 meters) are required for attachment of the secondary drawer to the primary drawer.
Disks, Media, and Boot Devices
- Each pSeries 660 Model 6H1 system must incorporate one CD-ROM.
- Boot support is supported via SCSI adapters, SSA adapters, or from network via Ethernet or token-ring adapters.
- The use of mirrored boot disks is recommended.
- Externally attached SCSI or SSA disk subsystems can be used to contain system boot disks, if desired. These devices must be ordered on the same system order with the same delivery schedule as the Model 6H1 system if software preload (#5005) is specified.
- One or two SCSI IPL disks can be mounted in the I/O drawer utilizing the Internal IPL Disk Mounting Hardware (#6540) feature. The Internal IPL Disk Mounting hardware is available for use in the I/O drawer only and eliminates the use of PCI slots 13 and 14.
- It is recommended internally mounted IPL disks be connected to an integrated SCSI port or a PCI SCSI adapter mounted in the I/O drawer. One or both of the internal IPL disks can be connected to the internal SCSI-2 F/W adapter utilized for media bay attachment. If desired, one or both of the internal disks can be connected to an external SCSI adapter port via the External SCSI Adapter to Internal IPL Disk Bays Cable assembly (#3139) and appropriate external SCSI cabling.
- The External SCSI Adapter to Internal IPL Disk Bays Cable Assembly (#3139) provides a connection from internally mounted IPL disks to a 68-pin P-style connector on the rear bulkhead of the I/O drawer. External cabling is required to attach the rear bulkhead connector to a SCSI adapter or the external SCSI port of the integrated SCSI adapter. SCSI cables (#2424 or #2425) can be utilized to connect to a SCSI adapter with a P-style connector. Converter cable (#2118) is used with SCSI cables (#2424 or #2425) to attach to the integrated SCSI adapter or a SCSI adapter with a VHDCI mini-68-pin connector.
- Orders specifying internal disks utilizing the Internal IPL Disk Mounting Hardware (#6540) feature that do not include the Internal IPL Disk Bays Cable Assembly (#3139) will be shipped with the internal disks cabled to the internal SCSI port serving the media bays. Orders containing two disks and feature numbers 6540 and 3139 (with the appropriate external cabling) will be shipped with the one disk cabled to the internal SCSI port and the second disk cabled to the external SCSI adapter port. The cabling can be changed in the field to allow both internal disks to be attached to the external SCSI port if desired.
- Disk drives are not supported in the media bays of the I/O drawers.
- A CD-ROM drive is required for each system. One additional media device can be installed in the I/O drawer.
- The pSeries 660 Model 6H1 PCI slot population rules are complex. The following PCI slot and adapter limitations are provided for general guidance purposes. Extensive configuration rules and checking procedures are incorporated into the PCRS6000 configurator to ensure valid system configurations. Configurations generated without utilizing the PCRS6000 configurator may create orders that cannot be manufactured, resulting in possible order rejection and delayed delivery.
- System maximum limits for adapters and devices may not provide optimal system performance. These limits are given for connectivity and functionality assurance.
- Configuration limitations have been established to help ensure appropriate bus loading, adapter addressing, and system and adapter functional characteristics when ordering the primary I/O drawer. These I/O drawer limitations are in addition to individual adapter limitations shown in the feature descriptions section.
- The primary and secondary I/O drawer contains 14 PCI slots. Slots 6, 7, 11, and 12 are 32-bit slots and are capable of supporting 5 V adapters. All remaining slots are 64-bit slots and do not support 5 V adapters. The 32-bit adapters can be used in 64-bit slots.
- A maximum of one graphics adapter is allowed per system.
-
A maximum total of 14 of the following adapters is allowed per system in
any combination:
- S/390® ESCON® Channel PCI Adapter (#2751)
- IBM ARTIC960Hx 4-Port Multiprotocol PCI Adapter (#2947)
- IBM ARTIC960RxD Quad Digital Trunk PCI Adapter (#6310)
-
A maximum of 10 of the following adapters is allowed per I/O drawer in
any combination:
- PCI 4-Channel Ultra3 SCSI RAID Adapter (#2498)
- PCI Universal Differential Ultra SCSI Adapter (#6204)
- PCI Dual Channel Ultra2 SCSI Adapter (#6205)
- Advanced SerialRAID Plus Adapter (#6230)
-
A maximum of 4 of the following 5 V adapters is allowed per I/O drawer in
any combination:
- S/390 ESCON Channel PCI Adapter (#2751)
- RS/6000 SP™ System Attachment Adapter (#8396)
-
It is not necessary to power down the system to install certain hot-plug
options. The following options are hot-plug capable:
- CEC power supplies (assumes redundant power supplies installed)
- I/O drawer power supplies (assumes redundant power supplies installed)
- Many PCI adapters
- Information regarding hot-plugging procedures is contained in the pSeries 660 Installation Guide .
- Any PCI adapter supporting the systems boot device or system console is not hot-plugged.
-
The following PCI cards are not supported for hot-plug:
- POWER GXT130P Graphics Accelerator (#2830)
- Cable and PCI card for SP Control Workstation Attachment (#3154)
- IBM RS/6000 SP System Attachment Adapter (#8396)
Clustered Server and SP-Attached Server Environments
-
Up to 32 RS/6000 and pSeries servers may be incorporated into a clustered
server or SP-attached server environment operating under the control of
the IBM Parallel Systems Support Programs (PSSP) for AIX.
Note: A maximum of 16 7017-SXX servers can be incorporated into each cluster of 32 servers.
- The clustered server implementation incorporates a control workstation for cluster control but does not require attachment to a 9076 SP frame. This is a non-switched environment in which data is passed between servers via Ethernet connection.
- When utilized as an SP-attached server, the pSeries 660 Model 6H1 is switch-attached to the 9076 SP frame via the RS/6000 SP System Attachment Adapter (#8396). This attachment provides interaction with 9076 SP nodes through the higher bandwidth switched environment.
- Each clustered or SP-attached Model 6H1 server must interface to the control workstation via the Clustered Server Control Panel to Control Workstation Cable (#3151) and customer-supplied Ethernet LAN cabling. Cable (#3151) may be ordered with either the clustered server or the control workstation, as desired.
- The Clustered Server Control Panel to Control Workstation Cable (#3151) interfaces to the Model 6H1 server via the Cable and PCI Card for SP Control Workstation Attachment (#3154). This feature (#3154) provides internal connection from a connector on the planar of the primary I/O drawer to a PCI slot location on the rear bulkhead of the I/O drawer. The associated PCI card must be placed in slot 7 of the primary I/O drawer.
- A minimum of one Ethernet adapter is required for each clustered or SP-attached Model 6H1 server. This adapter must be recognized by the clustered server as "EN0" and must reside in slot 1 of the primary I/O drawer. The supported adapter for this system LAN is the 10/100 Ethernet 10BaseTX adapter (#2968).
- The RS/6000 SP System Attachment Adapter (#8396) required for the SP-attached server environment is a 5 V adapter and must be located in slot 6 of the primary I/O drawer of the Model 6H1.
- IBM PSSP for AIX, Version 3.2 (5765-D51), or later, with APAR IY16350 and feature number 4013 is required for each clustered or SP-attached Model 6H1 server.
- AIX Version 4.3.3 with maintenance package 4330-08, or later, is required for each clustered or SP-attached Model 6H1 server.
- Some I/O adapters supported on the Model 6H1 servers when utilized in a non-clustered environment are not supported in the clustered server or SP-attached server environments and must be removed. Refer to the RS/6000 9076-550 Sales Manual pages for a list of the currently supported adapters. For more information, refer to the document RS/6000 SP Planning, Volume 1, Hardware and Physical Environment (GA22-7280).
- Additional information regarding server clustering and control workstations is available at the following IBM PSSP Web site:
Planning Information
Cable Orders:
No additional cables are required.
Security, Auditability, and Control
This product uses the security and auditability features of the operating system and application software.
The customer is responsible for evaluation, selection, and implementation of security features, administrative procedures, and appropriate controls in application systems and communications facilities.
Terms and Conditions
This product is available for purchase under the terms of the IBM Customer Agreement (ICA).
IBM hardware products are manufactured from new parts, or new and used parts. In some cases, the hardware product may have been previously installed. Regardless, IBM warranty terms apply.
Volume Orders: Contact your IBM representative.
IBM Credit Corporation Financing: Yes
Warranty Service: IBM On-Site Repair (IOR)
IBM Hourly Service Rate Classification: Two
Eligible Discount Type Three-Year Five-Year 7026 12% 17%
Corporate Service Option: The announced product is eligible for the Corporate Service Option of the ICA.
Discount
Option Three-Year Five-Year
Network 15% 20%
System 12% 17%
When a type of service involves the exchange of a machine part, the replacement may not be new, but will be in good working order.
Field-Installable Features: Yes
Licensed Machine Code: IBM licensed machine code is licensed for use by a customer on a specific machine, designated by serial number, under the terms and conditions of the IBM Agreement for Licensed Machine Code.
Educational Allowance: A reduced charge is available to qualified education customers. The educational allowance may not be added to any other discount or allowance.
Prices
The prices provided in this announcement are suggested retail prices for the U.S. only and are provided for your information only. Dealer prices may vary, and prices may also vary by country. Prices are subject to change without notice. For additional information and current prices, contact your local IBM representative.
Initial/
Feature Purchase MES/
Description Number Price MMMC(1) Both
Machine Type/Model 7026-6H1
pSeries 660 Model 6H1 $ 3,212 $148
RS64 IV, 0511 30,000 205 Initial
4-Way SMP,
HA Solution,
Factory Only
RS64 IV, 6-Way 0512 55,500 308 Initial
SMP, HA
Solution,
Factory Only
LC-SC Fibre 2456 100 Both
Channel
Converter
Cable
2048 MB Memory 4137 18,432 Both
(2 x 1024 MB
DIMMs)
RS64 III, 5201 6,000 86 Both
1-Way,
450 MHz,
2 MB L2 Cache
Initial/
Feature Purchase MES/
Description Number Price MMMC Both
RS64 III, 5202 $14,500 $149 Both
2-Way SMP,
450 MHz,
4 MB L2 Cache
RS64 III, 5204 24,500 183 Both
4-Way SMP,
450 MHz,
4 MB L2 Cache
RS64 IV, 1-Way, 5211 10,000 97 Both
600 MHz, 2 MB
L2 Cache
RS64 IV, 2-Way 5212 18,500 171 Both
SMP, 600 MHz,
4 MB L2 Cache
RS64 IV, 4-Way 5214 37,500 205 Both
SMP, 600 MHz,
4 MB L2 Cache
RS64 IV, 6-Way 5216 65,500 308 Both
SMP, 668 MHz,
8 MB L2 Cache
Gigabit Fibre 6228 3,100 Both
Channel
Adapter for
64-bit PCI
Bus
The following previously announced features are available on the specified models.
Initial/
Feature Purchase MES/
Description Number Price Both
Machine Type/Model 7026-6H1
After-market (MES) Order 0001 $ 0 MES
Indicator
HA Solution Indicator 0700 0 Initial
CCS Customer Service 0986 NC Initial
Specify (U.S.)
PCI SCSI Adapter to 2111 135 Both
2-Port, 8-Bit SE
External Device Cable
PCI SCSI Adapter to 2112 90 Both
2-Port, 8-Bit
Differential External
Device Cable
PCI SCSI Adapter to 2113 195 Both
Single Port 8-Bit SE
External Device Cable
PCI SCSI Adapter 16-Bit 2114 270 Both
Differential External
Y Cable
PCI SCSI Adapter to 2115 135 Both
2-Port, 16-Bit SE
External Device Cable
PCI SCSI Adapter to 2116 120 Both
2-Port, 16-Bit
Differential External
Device Cable
PCI SCSI Adapter 16-Bit 2117 275 Both
SE External Y Cable
Converter Cable, VHDCI to 2118 60 Both
P, Mini-68-pin to
68-pin, 0.3 m
0.6 m 16-Bit SCSI-2 System 2424 108 Both
to System Cable
Initial/
Feature Purchase MES/
Description Number Price Both
2.5 m 16-Bit SCSI-2 System 2425 $ 130 Both
to System Cable
PCI 4-Channel Ultra3 SCSI 2498 4,000 Both
RAID Adapter
32x (Maximum) SCSI-2 2624 375 Both
CD-ROM Drive
ARTIC960Hx/RxD 4-Port T1 2709 550 Both
RJ-45 Cable
ARTIC960Hx/RxD 4-Port E1 2710 550 Both
RJ-45 Cable
SysKonnect SK-NET 2741 1,590 Both
FDDI-LP SAS PCI
SysKonnect SK-NET 2742 2,500 Both
FDDI-LP DAS PCI
SysKonnect SK-NET 2743 1,400 Both
FDDI-LP SAS PCI
S/390 ESCON Channel PCI 2751 9,500 Both
Adapter
POWER GXT130P Graphics 2830 340 Both
Accelerator
ARTIC960Hx 4-Port EIA-232 2861 425 Both
Cable
ARTIC960Hx 4-Port RS-449 2862 500 Both
Cable
ARTIC960Hx 4-Port X.21 2863 500 Both
Cable
ARTIC960Hx 4-Port V.35 2864 675 Both
(DTE) Cable
ARTIC960Hx 4-Port EIA-530 2865 475 Both
Cable
IBM ARTIC960RxD Quad 2871 305 Both
DTA, T1, 100 Ohm,
3 m 4-Port Cable
IBM ARTIC960RxD Quad 2872 315 Both
DTA, T1, 100 Ohm,
15 m Extension Cable
IBM ARTIC960RxD Quad 2873 315 Both
DTA, E1, 120 Ohm
Balanced, 3 m
4-Port Cable
IBM ARTIC960RxD Quad 2874 160 Both
DTA, E1, 120 Ohm
Balanced,
7.5 m Extension Cable
IBM ARTIC960RxD Quad 2875 430 Both
DTA, E1, 75 Ohm
Unbalanced-Grounded,
1.8 m 4-Port Cable
IBM ARTIC960RxD Quad 2876 430 Both
DTA, E1, 75 Ohm
Unbalanced-Ungrounded,
1.8 m 4-Port Cable
IBM ARTIC960RxD Quad 2877 30 Both
DTA, H.100, 4-Drop
Cable
Asynchronous 2934 45 Both
Terminal/Printer Cable
EIA-232
Asynchronous Cable 2936 73 Both
EIA-232/V.24
8-Port Asynchronous 2943 1,395 Both
Adapter EIA-232/RS-422,
PCI bus
128-Port Asynchronous 2944 1,295 Both
Controller, PCI bus
Asynchronous Terminal 2945 130 Both
Cable -- EIA-422A
TURBOWAYS(R) 622 Mbps 2946 3,995 Both
PCI MMF ATM Adapter
Initial/
Feature Purchase MES/
Description Number Price Both
IBM ARTIC960Hx 4-Port 2947 $3,625 Both
Multiprotocol PCI
Adapter
Cable, V.24 / EIA-232 2951 175 Both
Cable, V.35 2952 320 Both
Cable, V.36 / EIA-499 2953 255 Both
Cable, X.21 2954 175 Both
2-Port Multiprotocol PCI 2962 2,000 Both
Adapter
TURBOWAYS 155 PCI UTP 2963 1,495 Both
ATM Adapter
IBM 10/100 Mbps Ethernet 2968 275 Both
PCI Adapter
Gigabit Ethernet -- SX 2969 2,125 Both
PCI Adapter
10/100/1000 Base-T 2975 1,600 Both
Ethernet PCI Adapter
TURBOWAYS 155 PCI MMF 2988 1,595 Both
ATM Adapter
9.1 GB 10,000 rpm 3027 1,160 Both
Ultra-SCSI Disk Drive
18.2 GB 10,000 rpm 3102 1,700 Both
Ultra-SCSI Disk Drive
Serial to Serial Port 3124 80 Both
Cable for Drawer/Drawer
Serial to Serial Port 3125 80 Both
Cable for Rack/Rack
Cable Assembly, External 3139 225 Both
SCSI Adapter to
Internal IPL Disk Bays
Remote I/O Cable, 3M 3142 595 Both
Remote I/O Cable, 6M 3143 745 Both
Remote I/O Cable, 15M 3144 1,170 Both
Cable, Clustered Server 3151 400 Both
Control Panel to
Control Workstation
Cable and PCI Card for SP 3154 450 Both
Control Workstation
Attachment
IBM P76 Color Monitor, 3627 995 Both
Stealth Black, Captured
Cable
IBM P260 Color Monitor, 3628 1,995 Both
Stealth Black, and
Cable
IBM P76 Color Monitor, 3629 995 Both
Pearl White, Captured
Cable
IBM P260 Color Monitor, 3630 1,995 Both
Pearl White, and Cable
Serial Port Converter 3925 25 Both
Cable, 9-pin to 25-pin
Async Printer/Terminal 3926 50 Both
Cable, 9-pin to 25-pin,
4 m
Memory Board, 16 Position 4075 1,500 Both
1024 MB (2 x 512 MB) 4100 9,216 Both
DIMMs, 200-pin 10 ns
SDRAM (2)
256 MB (2 x 128 MB) 4110 2,048 Both
DIMMs, 200-pin 10 ns
SDRAM
512 MB (2 x 256 MB) 4119 4,608 Both
DIMMs, 200-pin 10 ns
SDRAM
DDC 15-pin to 13W3 4238 100 Both
Display Cable
6-Foot Extender Cable for 4242 100 Both
Displays (15-pin
D-shell to 15-pin D-shell)
Initial/
Feature Purchase MES/
Description Number Price Both
H-100 Bus 8-position 4353 $ 100 Both
Cable
PCI Cryptographic 4958 7,000 Both
Coprocessor
IBM Token-Ring PCI 4959 795 Both
Adapter
Customer Service 5001 NC Initial
Specify
Software Preinstall 5005 0 Initial
System Control and 5992 75 Both
Initialization Cable, 3 m
System Control and 5993 175 Both
Initialization Cable, 6 m
Power Control Cable, 3 m 6006 60 Both
Power Control Cable, 15 m 6007 75 Both
Power Control Cable, 6 m 6008 45 Both
3-Button Mouse 6041 75 Both
Power Control Cable, CEC 6132 95 Both
to Primary I/O Drawer, 3 m
Power Control Cable, CEC 6136 200 Both
to Primary I/O Drawer, 6 m
20-40 GB 16-bit 8-mm 6156 6,250 Both
Internal Tape Drive
(Black Bezel)
20-40 GB 4-mm Internal 6158 2,995 Both
Tape Drive
12-24 GB 4-mm Internal 6159 3,200 Both
Tape Drive
PCI Universal 6204 650 Both
Differential Ultra SCSI
Adapter
PCI Dual Channel Ultra2 6205 790 Both
SCSI Adapter
Advanced SerialRAID Plus 6230 3,000 Both
Adapter
128 MB DRAM Option Card 6231 960 Both
32 MB Fast-Write Cache 6235 575 Both
Option Card
Redundant AC Power 6282 700 Both
Supply, CEC, 645W
Redundant AC Power 6283 725 Both
Supply, I/O Drawer,
595W
IBM ARTIC960RxD Quad 6310 11,000 Both
Digital Trunk PCI
Adapter
IBM ARTIC960RxF PCI 6311 10,900 Both
Adapter for RS/6000
I/O Drawer, Primary, 5EIA 6324 8,000 Initial
I/O Drawer, Secondary, 6325 7,000 Both
AC Power, 5EIA
I/O Drawer, Secondary, 6327 7,000 Both
DC Power, 5EIA
Internal IPL Disk 6540 100 Both
Mounting Hardware,
Cables, Terminator
Quiet Touch Keyboard
U.S. English, #103P 6600 100 Both
French, #189 6601 100 Both
Italian, #142 6602 100 Both
German/Austrian, #129 6603 100 Both
U.K. English, #166 6604 100 Both
Spanish, #172 6605 100 Both
Japanese, #194 6606 100 Both
Belgian/French, #120 6609 100 Both
Belgian/U.K.-Flemish, 6610 100 Both
#120
Swedish/Finnish, #153 6611 100 Both
Initial/
Feature Purchase MES/
Description Number Price Both
Quiet Touch Keyboard
Danish, #159 6612 $ 100 Both
Swiss, French/German, 6614 100 Both
#150f/g
Norwegian, #155 6616 100 Both
Greek, #319 6619 100 Both
Hebrew, #212 6620 100 Both
L.A. Spanish, #171 6629 100 Both
Arabic, #238 6630 100 Both
Korean, #413 6633 100 Both
Chinese/U.S., #467 6634 100 Both
Russian, #443 6638 100 Both
U.S. English 6640 100 Both
ISO9995, #103P
AAP Software Pre-Install 7305 0 Initial
Indicator
128-Port Asynchronous 8131 60 Both
Controller Cable,
4.5 meter
128-Port Asynchronous 8132 40 Both
Controller Cable,
23-cm (9-inch)
RJ-45 to DB-25 8133 120 Both
Converter Cable
64-Port to 128-Port 8135 45 Both
Pin-Out Converter
Rack Mountable Remote 8136 2,500 Both
Asynchronous Node
16-Port EIA-232
Enhanced Remote 8137 1,595 Both
Asynchronous Node
16-Port EIA-232
Enhanced Remote 8138 1,795 Both
Asynchronous Node
16-Port RS-422
RS/6000 SP System 8396 10,000 Both
Attachment Adapter
Quiet Touch Keyboard -- Stealth Black
U.S. English, 8700 100 Both
#103P
French, #189 8701 100 Both
Italian, #142 8702 100 Both
German/Austrian, #129 8703 100 Both
U.K. English, #166 8704 100 Both
Spanish, #172 8705 100 Both
Japanese, #194 8706 100 Both
Brazilian 8707 100 Both
Portuguese, #275
Canadian French, #058 8708 100 Both
Belgian/French, #120 8709 100 Both
Belgian/U.K.-Flemish, 8710 100 Both
#120
Swedish/Finnish, #153 8711 100 Both
Danish, #159 8712 100 Both
Bulgarian, #442 8713 100 Both
Swiss, French/German, 8714 100 Both
#150f/g
Norwegian, #155 8716 100 Both
Dutch, #143 8717 100 Both
Portuguese, #163 8718 100 Both
Greek, #319 8719 100 Both
Hebrew, #212 8720 100 Both
Hungarian, #208 8721 100 Both
Icelandic, #197 8722 100 Both
Polish, #214 8723 100 Both
Romanian, #446 8724 100 Both
Slovakian, #245 8725 100 Both
Initial/
Feature Purchase MES/
Description Number Price Both
Quiet Touch Keyboard
Czech, #243 8726 100 Both
Turkish, #179 8727 100 Both
Turkish, #440 8728 100 Both
L.A. Spanish, #171 8729 100 Both
Arabic, #238 8730 100 Both
Serbian-Cyrillic, #118 8732 100 Both
Korean, #413 8733 100 Both
Chinese/U.S., #467 8734 100 Both
French Canadian, #445 8735 100 Both
Thai, #191 8736 100 Both
Russian, #443 8738 100 Both
Croatian, #105 8739 100 Both
U.S. English 8740 100 Both
ISO9995, #103P
3-Button Mouse -- 8741 75 Both
Stealth Black
Southern Hemisphere 9004 0 Both
Designator for Monitors
Language Group Specify --
U.S. English 9300 NC Initial
French 9703 NC Initial
German 9704 NC Initial
Polish 9705 NC Initial
Portuguese 9707 NC Initial
Spanish 9708 NC Initial
Italian 9711 NC Initial
Canadian French 9712 NC Initial
Japanese 9714 NC Initial
Traditional 9715 NC Initial
Chinese (Taiwan)
Korean 9716 NC Initial
Hungarian 9719 NC Initial
Slovakian 9720 NC Initial
Russian 9721 NC Initial
Simplified 9722 NC Initial
Chinese (PRC)
Power Cord Specify --
United States/Canada 9800 0 Both
Belgium, Finland, 9820 0 Both
France (250 V, 16 A)
Denmark (250 V, 10 A) 9821 0 Both
United Kingdom 9825 0 Both
(250 V, 13 A)
Israel (250 V, 6-16 A) 9827 0 Both
Switzerland 9828 0 Both
(250 V, 10 A)
South Africa/ 9829 0 Both
Pakistan (250 V, 16 A)
Italy (250V, 9830 0 Both
10 A and 16 A)
Argentina 9831 0 Both
(250 V, 10 A)
Thailand 9833 0 Both
(250 V, 15 A)
Uruguay 9834 0 Both
(250 V, 10 A)
Initial/
MES/
Model Feature Purchase Both/
Description Number Numbers Price Support
Rack Content Specify: 7026/6H1 -- 5EIA
S00 0188 NC Initial
T00 Initial
T42 Initial
Front Door for 1.8 meter Rack (Sculptured Black)
T00 6088 $450 Both
Front Door for 2.0 meter Rack (Sculptured Black)
T42 6089 550 Both
For ServiceElect (ESA) Maintenance Service Charges, contact Global
Services 888-IBM-4343 (426-4343).
Feature Conversion Purchase Price
Processor Feature Conversions — pSeries 660 Model 6H1: Customers with installed pSeries 660 Model 6H1 systems may increase the number of processors in their system up to a maximum of a 6-way SMP via feature conversions. Such conversions are accomplished by replacing the system's existing processor card with a processor card containing a greater number of processors. The existing Model 6H1 processor card being replaced is returned to IBM.
The following RS64 III and RS64 IV processor feature conversions are available to pSeries 660 Model 6H1 customers who want to increase the number of processors in their systems:
Continuous Maintenance/Returned Parts: Yes
Feature
From To Conversion
Feature Feature Purchase
Number Number Price
5201 --
1-way, 450 MHz 5202 -- 2-way, 450 MHz $11,500
1-way, 450 MHz 5204 -- 4-way, 450 MHz 21,500
1-way, 450 MHz 5212 -- 2-way, 600 MHz 15,500
1-way, 450 MHz 5214 -- 4-way, 600 MHz 34,500
1-way, 450 MHz 5216 -- 6-way, 668 MHz 62,500
5202 --
2-way, 450 MHz 5204 -- 4-way, 450 MHz 17,250
2-way, 450 MHz 5212 -- 2-way, 600 MHz 11,250
2-way, 450 MHz 5214 -- 4-way, 600 MHz 30,250
2-way, 450 MHz 5216 -- 6-way, 668 MHz 58,250
5204 --
4-way, 450 MHz 5214 -- 4-way, 600 MHz 25,250
4-way, 450 MHz 5216 -- 6-way, 668 MHz 53,250
5211 --
1-way, 600 MHz 5204 -- 4-way, 450 MHz 19,500
1-way, 600 MHz 5212 -- 2-way, 600 MHz 13,500
1-way, 600 MHz 5214 -- 4-way, 600 MHz 32,500
1-way, 600 MHz 5216 -- 6-way, 668 MHz 60,500
Feature
From To Conversion
Feature Feature Purchase
Number Number Price
5212 --
2-way, 600 MHz 5204 -- 4-way, 450 MHz 15,250
2-way, 600 MHz 5214 -- 4-way, 600 MHz 28,250
2-way, 600 MHz 5216 -- 6-way, 668 MHz 56,250
5214 -- 4-way, 5216 -- 6-way, 668 MHz 46,750
600 MHz
0511 -- 4-way, 5216 -- 6-way, 668 MHz 50,500
600 MHz
(HA Solution Processor)
Customer Financing: IBM Global Financing offers attractive financing to credit-qualified commercial and government customers and Business Partners in more than 40 countries. IBM Global Financing is provided by the IBM Credit Corporation in the United States. Offerings, rates, terms, and availability may vary by country. Contact your local IBM Global Financing organization. Country organizations are listed on the Web at:
Order Now
Use Priority/Reference Code: RE001
Phone: 800-IBM-CALL
Fax: 800-2IBM-FAX
Internet: ibm_direct@us.ibm.com
Mail: IBM Atlanta Sales Center
Dept. RE001
P.O. Box 2690
Atlanta, GA 30301-2690
You can also contact your local IBM Business Partner or IBM representative. To identify them, call 800-IBM-4YOU.
Note: Shipments will begin after the planned availability date.
Trademarks