IBM PowerLinux 7R1 is optimized for Linux to help deliver new solutions and services faster, with higher quality

IBM United States Hardware Announcement 112-119
July 10, 2012


Table of contents
Overview Overview Technical information Technical information
Key prerequisites Key prerequisites Terms and conditions Terms and conditions
Planned availability date Planned availability date Prices Prices
Description Description Order now Order now
Publications Publications

(Corrected on July 16, 2012)

Corrected title of Hardware Announcement 112-118.

Top rule
At a glance
Bottom rule

The PowerLinux 7R1 is fueled by the outstanding performance and energy efficiency of the IBM® POWER7® processor optimized for the Linux™ operating system running on the IBM Power® platform:

For ordering, contact your IBM representative, an IBM Business Partner, or IBM Americas Call Centers at 800-IBM-CALL (Reference: YE001).



Back to topBack to top
 
Top rule
Overview
Bottom rule

The IBM PowerLinux™ 7R1 server delivers the outstanding performance of the IBM POWER7 processor in a dense, highly efficient 2U rack-optimized form factor for Linux customers. It is ideal for running multiple Linux infrastructure and application workloads, and with PowerVM® virtualization, can be more economical than traditional Linux servers.

Take advantage of the scalability and capacity of IBM PowerLinux 7R1 by leveraging the feature-rich PowerVM virtualization technology from IBM to fully utilize the server's capacity and deploy virtual partitions faster. You can move workloads as needed across PowerLinux and Power Systems™ servers with Live Partition Mobility.

The IBM PowerLinux 7R1 server is a Linux only 2U rack-mount server with one processor socket offering an 8-core 3.55 GHz configuration.

The PowerLinux 7R1 server supports a maximum of eight DDR3 DIMM slots, with four DIMM slots included in the base configuration and four more slots available with one optional memory riser card, allowing for a maximum system memory of 128 GB.

Memory features (two memory DIMMs per feature) supported are 8 GB, 16 GB, and 32 GB, running at speeds of 1066 MHz. PowerVM now features Active Memory™ Sharing, the technology that allows you to intelligently exchange memory between running partitions for increased optimization of physical memory resources. Active Memory Sharing enables the sharing of a pool of physical memory among logical partitions (LPARs) on a single server, helping to increase memory utilization and drive down system costs.

The IBM PowerLinux 7R1 server offers three storage backplane options. The first supports three SFF SAS HDDs or SSDs, an SATA DVD, and a half-high tape drive. The second supports six SFF SAS HDDs or SSDs and an SATA DVD. These two choices both provide an integrated SAS controller, offering RAID 0, 1, and 10 support. The third supports six SFF SAS HDDs or SSDs, an SATA DVD, and adds support for dual write cache RAID 5, RAID 6, and an external SAS port. HDDs and SSDs are hot-swap and front accessible with each of the three alternatives.

Other integrated features include:

The PowerLinux system is specifically designed for emerging workloads that are proven ideal for a virtualized scale-out, Linux server environment.

The PowerLinux 7R1 server benefits from POWER7 performance, Intelligent Threads technology, and high memory and I/O bandwidth. These workloads realize more performance, more efficient virtualization, unique workload optimizing features, and industry-leading reliability, availability, and scalability at prices comparable with traditional Linux servers.

IBM is investing in new technologies to further advance the value of the PowerLinux 7R1 server for emerging and traditional workloads.



Back to topBack to top
 
Top rule
Key prerequisites
Bottom rule

Refer to the Hardware requirements section and Software requirements section.



Back to topBack to top
 
Top rule
Planned availability date
Bottom rule

July 20, 2012



Back to topBack to top
 
Top rule
Description
Bottom rule

IBM PowerLinux 7R1

Summary of standard features:

Certain configurations of the PowerLinux 7R1 are ENERGY STAR Qualified. Refer to

http://www-03.ibm.com/systems/hardware/energy_star/index.html

You can order the PowerLinux 7R1 using feature number ELBA for a configuration with one POWER7 3.55 GHz processor module.

In addition to the processor module, the minimum PowerLinux 7R1 initial order must include:

The minimum defined initial order configuration, if no choice is made, is as follows:

 
   Feature number    Description
   
   ELBA              Package indicator which includes:
    1 x EPL5         0/8 core 3.55 GHz POWER7 Processor Module (with ELBA)
    8 x EPLA         8 Processor Activation (Zero-priced)
 
    2 x EL16         32 GB Memory (Zero-priced)
    2 x EL03         146.8 GB 15k SFF HDD
 
   EL0T              Storage Backplane for 2.5-inch Drives/SATA DVD/Tape
                      (Zero-priced)
 
   EL11              PCIe2 LP 4-port 1GbE Adapter ($0)
 
    1 x 5603         Power Supply, 1725 Watt AC
    9300/97xx        Language Group Specify
    2147             Primary Operating System Indicator - Linux (#2147)
 
   8 x #EC22         IBM PowerVM for IBM PowerLinux (1 per core)
 
     or
 
   5765-G66          GPFS
    1 x 6xxx         One Power Cord
 
 


Note:

Dynamic LPAR

The dynamic LPAR function offers enhanced resource management for the PowerLinux 7R1 server. Dynamic LPAR enables available system resources to be quickly and easily configured across multiple logical partitions to meet the rapidly changing needs of your business.

With dynamic LPAR, you can add new system resources such as new HDDs or SSDs into your system's configuration without requiring a reboot. If the PowerVM for PowerLinux (EC22) feature is installed in the system, a maximum of 10 dynamic LPARs for each physical processor can be defined, with a PowerLinux 7R1 system maximum of 80 dynamic LPARs.

Notes for System Director and VMControl:

IBM PowerVM for IBM PowerLinux (#EC22)

Either PowerVM for PowerLinux or GPFS is required on the PowerLinux 7R1.

PowerVM for PowerLinux enables you to create partitions in units of less than 1 CPU (sub-CPU LPARs) and enables the same system I/O to be added to these partitions. The feature also includes a software component that enables cross-partition workload management.

PowerVM for PowerLinux offers:

At initial order entry, you can select feature number EC22 to enable Micro-Partitioning during manufacture and the enabling software media and publications to be shipped to you. When you order feature number EC22 as an MES, an activation key is posted on the following website, and you must retrieve it and install it on the system.

http://www-912.ibm.com/pod/pod

Notes for PowerVM for PowerLinux:

PowerVM for PowerLinux also includes Live Partition Mobility, which allows for the movement of a logical partition from one POWER6® or POWER7 server to another with no application downtime, and Active Memory Sharing, which dynamically reallocates memory between running logical partitions on a server.


Note: PowerVM 2.1.2.11 with Fix Pack 22.1 and Service Pack 1, or later, and a supported Linux operating system level are minimum requirements for performing Live Partition Mobility functions on POWER7 . For more information on minimum Linux operating system levels, refer to the Software requirements section.

19-inch racks

The PowerLinux 7R1 (8246-L1C) is designed to mount in the 36U 7014-T00 (#0551) or the 42U 7014-T42 (#0553) rack. These racks are built to the 19-inch EIA standard. When you order a new 8246 system, you can also order the appropriate 7014 rack model with the system hardware on the same initial order. IBM is making the racks available as features of the 8246-L1C when you order additional I/O drawer hardware for an existing system (MES order). The rack feature number should be used if you want IBM to integrate the newly ordered I/O drawer in a 19-inch rack before shipping the MES order.

1.8-meter rack (#0551)

The 1.8-meter rack (#0551) is a 36 EIA unit rack. The rack that is delivered as feature 0551 is the same rack delivered when you order the 7014-T00 rack; the included features may be different. Some features that are delivered as part of the 7014-T00 must be ordered separately with the feature 0551. Order the feature 0551 only when required to support rack integration of MES orders prior to shipment from IBM .

2.0-meter rack (#0553)

The 2.0-meter rack (#0553) is a 42 EIA unit tall rack. The rack that is delivered as feature 0553 is the same rack delivered when you order the 7014-T42 rack; the included features may be different. Some features that are delivered as part of the 7014-T42 must be ordered separately with the feature 0553. Order the feature 0553 only when you require support for rack integration of MES orders prior to shipment from IBM .

IBM Power Systems deployment-ready services

IBM offers a portfolio of integration, configuration, and customization services for IBM Power Systems . These services are designed to accelerate customer solution deployment and reduce related resources and cost. Offerings include:

For more information on deployment-ready services, visit

http://www.ibm.com/power/deploymentreadyservices/

Reliability, availability, and serviceability (RAS) features

Reliability, fault tolerance, and data correction

The reliability of systems starts with components, devices, and subsystems that are designed to be highly reliable. The POWER7 processor SCM uses lower-voltage technology, improving reliability with stacked latches to reduce soft error (SER) susceptibility. During the design and development process, subsystems go through rigorous verification and integration testing processes. During system manufacturing, systems go through a thorough testing process to help ensure the highest level of product quality.

The system cache and memory offer ECC (error checking and correcting) fault-tolerant features. ECC is designed to correct environmentally induced, single-bit, intermittent memory failures and single-bit hard failures. With ECC, the likelihood of memory failures will be reduced. ECC also provides double-bit memory error detection that helps protect data in the event of a double-bit memory failure.

The Linux operating system supports disk drive mirroring (RAID 1) through software, while other RAID protection schemes are provided via hardware RAID adapters.

Memory error correction extensions

The memory has single-bit-error correction and double-bit-error detection ECC circuitry. The ECC code is also designed such that the failure of any one specific memory module within an ECC word by itself can be corrected absent any other fault.

Memory protection features include scrubbing to detect errors, a means to call for the deallocation of memory pages for a pattern of correctable errors detected, and signaling deallocation of a logical memory block when an error occurs that cannot be corrected by the ECC code.

Fault monitoring functions
Mutual surveillance

The Service Processor monitors the operation of the firmware during the boot process, and also monitors the hypervisor for termination. The hypervisor monitors the Service Processor and will perform a reset/reload if it detects the loss of the Service Processor. If the reset/reload does not correct the problem, the hypervisor notifies the operating system and the operating system can take appropriate action, including calling for service.

Environmental monitoring functions

POWER7-based servers include a range of environmental monitoring functions:

Availability enhancement functions

The POWER7 family of systems continues to offer and introduce significant enhancements designed to increase system availability.

POWER7 processor functions

As in POWER6 , the POWER7 processor can perform processor instruction retry and alternate processor recovery for a number of core-related faults. This significantly reduces exposure to both hard (logic) and soft (transient) errors in the processor core. Soft failures in the processor core are transient (intermittent) errors, often due to cosmic rays or other sources of radiation, and generally are not repeatable. When an error is encountered in the core, the POWER7 processor will first automatically retry the instruction. If the source of the error is truly transient, the instruction succeeds and the system continues as before. On IBM systems prior to POWER6 , this error would have caused a checkstop.

Hard failures are more difficult, being true logical errors that will be replicated each time the instruction is repeated. Retrying the instruction will not help in this situation. As in POWER6 , POWER7 processors have the ability to extract the failing instruction from the faulty core and retry it elsewhere in the system for a number of faults, after which the failing core is dynamically deconfigured and called out for replacement. These systems are designed to avoid a full system outage.

POWER7 single processor checkstopping

As in POWER6 , POWER7 provides single processor checkstopping. This significantly reduces the probability of a fault in any one processor affecting total system availability.

Partition availability priority

Also available is the ability to assign availability priorities to partitions. If an alternate processor recovery event requires spare processor resources in order to protect a workload, when no other means of obtaining the spare resources is available, the system will determine which partition has the lowest priority and attempt to claim the needed resource. On a properly configured POWER7 processor-based server, this allows that capacity to be first obtained from, for example, a test partition instead of a financial accounting system.

POWER7 cache availability

The POWER® processor-based line of servers continues to be at the forefront of cache availability enhancements. The L3 cache is now integrated on the POWER7 processor. The POWER7 processor provides both L2 and L3 cache line delete functions.

Special uncorrectable error handling

Special Uncorrectable Error (SUE) handling is an IBM innovation introduced for POWER5 processors, where an uncorrectable error in memory or cache does not immediately cause the system to terminate. Rather, the system tags the data and determines whether it will ever be used again. If the error is irrelevant, it will not force a checkstop.

PCI extended error handling

PCI extended error handling (EEH)-enabled adapters respond to a special data packet generated from the affected PCI slot hardware by calling system firmware, which will examine the affected bus, allow the device driver to reset it, and continue without a system reboot. For Linux , EEH support extends to the majority of frequently used devices, although some third-party PCI devices may not provide native EEH support.

Predictive failure and dynamic component deallocation

Servers with POWER processors have long had the capability to perform predictive failure analysis on certain critical components such as processors and memory. When these components exhibit certain symptoms that may indicate a failure is imminent, the system can dynamically deallocate and call home, when enabled, about the failing part before the error is propagated system-wide. In many cases, the system first attempts to reallocate resources in such a way that avoids unplanned outages. In the event that insufficient resources exist to maintain full system availability, these servers attempt to maintain partition availability by user-defined priority.

Uncorrectable error recovery

When the auto-restart option is enabled, the system can automatically restart following an unrecoverable software error, hardware failure, or environmentally induced (ac power) failure.

Serviceability

The purpose of serviceability is to repair the system while attempting to minimize or eliminate service cost (within budget objectives), while maintaining high customer satisfaction. Serviceability includes system installation, MES (system upgrades/downgrades), and system maintenance/repair. Depending upon the system and warranty contract, service may be performed by the customer, an IBM representative, or an authorized warranty service provider.

The serviceability features delivered in this system provide a highly efficient service environment by incorporating the following attributes:

Service environments

The HMC is a dedicated server that provides functions for configuring and managing servers for either partitioned or full-system partition using a GUI or command-line interface (CLI). An HMC attached to the system allows support personnel (with client authorization) to remotely log in to review error logs and perform remote maintenance if required.

The POWER7 processor-based platforms support two main service environments:

Service interface

The service interface enables support personnel to communicate with the service support applications in a server using a console, interface, or terminal. Delivering a clear, concise view of available service applications, the service interface allows the support team to manage system resources and service information in an efficient and effective way. Applications available via the service interface are carefully configured and placed to give service providers access to important service functions.

Different service interfaces are used, depending on the state of the system and its operating environment. The primary service interfaces are:

In the light path LED implementation, the system can clearly identify components for replacement by using specific component-level LEDs, and can also guide the servicer directly to the component by signaling (turning on solid) the amber system fault LED, enclosure fault LED, and the component FRU fault LED. The servicer can also use the identify function to blink the FRU-level LED. When this function is activated, a roll-up to the blue enclosure locate and system locate LEDs will occur. These LEDs will turn on solid and can be used to follow the light path from the system to the enclosure and down to the specific FRU.

FFDC analysis

FFDC is a technique that helps ensure that when a fault is detected in a system, the root cause of the fault will be captured without the need to re-create the problem or run any sort of extending tracing or diagnostics program. For the vast majority of faults, a good FFDC design means that the root cause can also be detected automatically without servicer intervention.

FFDC information, error data analysis, and fault isolation are necessary to implement the advanced serviceability techniques that enable efficient service of the systems and to help determine the failing items.

In the rare absence of FFDC and error data analysis, diagnostics are required to re-create the failure and determine the failing items.

Diagnostics

General diagnostic objectives are to detect and identify problems such that they can be resolved quickly. Elements of IBM's diagnostics strategy include:

Automatic diagnostics

Because of the FFDC technology designed into IBM servers, it is not necessary to perform re-create diagnostics for failures or require user intervention. Solid and intermittent errors are designed to be correctly detected and isolated at the time the failure occurs. Runtime and boot-time diagnostics fall into this category.

Stand-alone diagnostics

As the name implies, stand-alone or user-initiated diagnostics require user intervention. The user must perform manual steps, including:

Concurrent maintenance

The system will continue to support concurrent maintenance of power, cooling, HDD or SSD, DVD, and firmware updates (when possible). The determination of whether a firmware release can be updated concurrently is identified in the readme information file released with the firmware.

Service labels

Service providers use these labels to assist them in performing maintenance actions. Service labels are found in various formats and positions, and are intended to transmit readily available information to the servicer during the repair process. Following are some of these service labels and their purpose:

Packaging for service

The following service enhancements are included in the physical packaging of the systems to facilitate service:

Error handling and reporting

In the event of system hardware or environmentally induced failure, the system run-time error capture systematically analyzes the hardware error signature to determine the cause of failure. The analysis result is stored in system NVRAM. When the system can be successfully restarted either manually or automatically, the error is reported to the operating system. Error log analysis (ELA) can be used to display the failure cause and the physical location of the failing hardware.

With the integrated Service Processor, the system can automatically send out an alert via phone line to a pager or call for service in the event of a critical system failure. A hardware fault also turns on the amber system fault LED located on the system unit to alert the user of an internal hardware problem. The indicator may also be set to blink by the operator as a tool to allow system identification. For identification, the blue locate LED on the enclosure and at the system level turns on solid. The amber system fault LED is turned on solid when an error condition occurs.

On POWER7 processor-based servers, hardware and software failures are recorded in the system log. When an HMC is attached, an ELA routine analyzes the error, forwards the event to the service focal point (SFP) application running on the HMC, and notifies the system administrator that it has isolated a likely cause of the system problem. The Service Processor event log also records unrecoverable checkstop conditions, forwards them to the SFP application, and notifies the system administrator. After the information is logged in the SFP application, if the system is properly configured, a call home service request is initiated and the pertinent failure data with service parts information and part locations is sent to an IBM service organization. Customer contact information and specific system-related data such as the machine type, model, and serial number, along with error log data related to the failure are sent to IBM Service.

Service Processor

The Service Processor can diagnose, check the status of, and sense the operational conditions of a system. It runs on its own power boundary and does not require resources from a system processor to be operational to perform its tasks.

The Service Processor supports surveillance of the connection to the HMC and to the system firmware (hypervisor). It also provides several remote power control options, environmental monitoring, reset, restart, remote maintenance, and diagnostic functions, including console mirroring. The Service Processor menus (ASMI) can be accessed concurrently with system operation, allowing nondisruptive abilities to change system default parameters.

Call Home

Call Home refers to an automatic or manual call from a customer location to IBM support structure with error log data, server status, or other service-related information. Call Home invokes the service organization in order for the appropriate service action to begin. Call Home can be done through HMC or most non-HMC managed systems. While configuring Call Home is optional, clients are encouraged to implement this feature in order to obtain service enhancements such as reduced problem determination and faster and potentially more accurate transmittal of error information. In general, using the Call Home feature can result in increased system availability. The Electronic Service Agent™ application can be configured for automated call home. The following section contains specific details on this application.

IBM Electronics Services

Electronic Service Agent and the IBM Electronic Services web portal comprise the IBM Electronic Services solution -- dedicated to providing fast, exceptional support to IBM customers. IBM Electronic Service Agent is a no-charge tool that proactively monitors and reports hardware events such as system errors, performance issues, and inventory. Electronic Service Agent can help focus on the customer's company business initiatives, save time, and spend less effort managing day-to-day IT maintenance issues.

Integrated in the operating system in addition to the HMC, Electronic Service Agent is designed to automatically and electronically report system failures and customer-perceived issues to IBM , which can result in faster problem resolution and increased availability. System configuration and inventory information collected by Electronic Service Agent also can be viewed on the secure Electronic Services web portal and used to improve problem determination and resolution between the customer and the IBM support team. As part of an increased focus to provide even better service to IBM customers, Electronic Service Agent tool configuration and activation comes standard with the system. In support of this effort, a new HMC External Connectivity security whitepaper has been published, which describes data exchanges between the HMC and the IBM Service Delivery Center (SDC) and the methods and protocols for this exchange. To read the whitepaper and prepare for Electronic Service Agent installation, go to the "Reference Guide" section at

http://www.ibm.com/support/electronic

Select your country.

Click on " IBM Electronic Service Agent Connectivity Guide."

Benefits

Increased uptime:

Electronic Service Agent is designed to enhance the warranty and maintenance service by providing faster hardware error reporting and uploading system information to IBM Support. This can optimize the time monitoring the symptoms, diagnosing the error, and manually calling IBM Support to open a problem record. And 24x7 monitoring and reporting means no more dependency on human intervention or off-hours customer personnel when errors are encountered in the middle of the night.

Security:

Electronic Service Agent is secure in monitoring, reporting, and storing the data at IBM . Electronic Service Agent securely transmits via the Internet (HTTPS or VPN) and can be configured to communicate securely through gateways to provide customers a single point of exit from their site. Communication between you and IBM only flows one way; activating Service Agent does not enable IBM to call into your system. System inventory information is stored in a secure database, which is protected behind IBM firewalls. Your business applications or business data is never transmitted to IBM .

More accurate reporting:

Because system information and error logs are automatically uploaded to the IBM Support Center in conjunction with the service request, you are not required to find and send system information, decreasing the risk of misreported or misdiagnosed errors. Once inside IBM , problem error data is run through a data knowledge management system and knowledge articles are appended to the problem record.

Customized support:

Using the IBM ID entered during activation, you can view system and support information in the "My Systems" and "Premium Search" sections of the Electronic Services website.

The Electronic Services web portal is a single Internet entry point that replaces the multiple entry points traditionally used to access IBM Internet services and support. This web portal enables you to gain easier access to IBM resources for assistance in resolving technical problems. The newly improved My Systems and Premium Search functions make it even easier for Electronic Service Agent-enabled customers to track system inventory and find pertinent fixes.

My Systems provides valuable reports of installed hardware and software using information collected from the systems by IBM Electronic Service Agent . Reports are available for any system associated with the customer's IBM ID. Premium Search combines the function of search and the value of Electronic Service Agent information, providing advanced search of the technical support knowledgebase. Using Premium Search and the Service Agent information that has been collected from the system, you can see search results that apply specifically to your systems.

For more information on how to utilize the power of IBM Electronic Services, visit the following website or contact an IBM Systems Services Representative

http://www.ibm.com/support/electronic

Big data analytics

Companies want to deliver insights faster with optimized solutions that process structured and unstructured data on a massive scale. IBM PowerLinux Big Data Solutions offer breakthrough solutions for big data analytics whether it's IBM Big Data software solutions such as IBM InfoSphere® BigInsights or InfoSphere Streams, or Open Source software such as Apache Hadoop.

The IBM PowerLinux Big Data Solution for InfoSphere BigInsights enables organizations to mine data at rest and the PowerLinux Big Data Solution for InfoSphere Streams analyzes data in motion.

Apache Hadoop is a software framework that supports data-intensive applications under a free license. It enables applications to work with thousands of nodes and petabytes of data and can help users perform analysis swiftly, including unstructured data which isn't possible to analyze with conventional systems. The Apache Hadoop software framework has been updated specifically to take advantages of benefits of the Power architecture with the IBM PowerLinux Big Data Solution for Apache Hadoop.

PowerLinux big data solutions are optimized for both structured and unstructured data to help businesses deliver analytics services faster by taking advantage of the workload-optimizing features of the POWER7 architecture that specifically apply to big data:

InfoSphere BigInsights for PowerLinux uses the open source Apache Hadoop framework and other open source and IBM value-added technologies for distributed processing of large data sets across clusters of computers. This big data solution can help companies analyze social media sites for the latest buzz about their products, for example, and take action to boost sales.

InfoSphere Streams for PowerLinux analyzes data in motion. Designed to manage stream flows and apply various analytics against streaming data, companies can store less, analyze more, and make better decisions faster. By extracting insight from data as it streams into your organization, you can react to events as they are happening to change business outcomes. For example, financial institutions can inspect real-time credit card usage to detect and prevent fraudulent transactions.

The PowerLinux Big Data Solution for InfoSphere Streams performs complex real-time analytics on data in motion. Enterprises can seamlessly extend existing applications with data mining capabilities - and scale to any size PowerLinux cluster. The PowerLinux Big Data Solution for InfoSphere Streams also leverages GPFS - the industry-leading cluster file system from IBM .

Industry application solutions

More companies are relying on Linux for business applications that are designed for their industry and tuned for specific business needs. PowerLinux provides a highly secure, resilient, and fully optimized stack for industry applications, enabling faster time-to-delivery for new, differentiating services with less downtime. Optimized systems tuned with PowerLinux offer a lower cost per workload for high-quality business services compared to x86 commodity servers. Solutions for government, banking, manufacturing, and others are available in several local markets.

The IBM PowerLinux Solution Edition for SAP Applications delivers a single system SAP environment for midsize businesses, supporting up to 500 SAP users on the competitively priced IBM PowerLinux 7R1 server with IBM PowerVM and IBM DB2® . The IBM PowerLinux 7R1 server provides the ideal platform to consolidate multiple x86 server workloads on to a single server. SAP production, development, test, and database environments can run on a single high performing, efficient and reliable server. Consolidation of the SAP and database environments simplify administration and maintenance for SAP applications and lower IT costs for midsize businesses.

The IBM PowerLinux Solution Edition for SAP Applications leverages IBM PowerVM for IBM PowerLinux that is optimized for the Linux operating system and is offered exclusively on the IBM PowerLinux servers. IBM PowerVM for IBM PowerLinux incorporates all the features of PowerVM Enterprise Edition and provides unique advanced capabilities for Linux environments, including the ability to dynamically remove memory from running virtual machines (VMs) and reallocate it to other VMs and the ability to enhance performance by automatically reacting to anticipated and unanticipated spikes in server demand.

IBM PowerVM for IBM PowerLinux offers new pricing for cost-effective virtualized workload environments. With lower virtualization costs you receive IT savings through the total cost of acquisition (TCA) and the total cost of ownership (TCO).

The IBM PowerLinux Solution Edition for SAP Applications supports SAP's POWER7 certified products like SAP Business Suite and SAP Solution Manager with IBM DB2 V9.7. SAP products are available for order from SAP or SAP Business Partners.

Open source infrastructure services

Today, Linux is the low-cost deployment platform of choice for vital applications like web, email, and social media collaboration. Companies are replacing more expensive infrastructure applications with robust open source offerings running on Linux , and running them in virtualized environments. With the IBM PowerLinux Linux Application Services Edition you can run key infrastructure workloads with industry standards-based Linux on competitively priced PowerLinux servers. Open source applications for Power Linux are included with commercial Linux distributions from Red Hat and SUSE, and supported by Red Hat, SUSE, or IBM . Open source applications like email, file and print, web, and network infrastructure can be installed and configured in the IBM PowerLinux Linux Application Services Edition using the IBM Installation Toolkit. The IBM Installation Toolkit simplifies the setup of your workloads by stepping you through their configuration.

The IBM PowerLinux Linux Application Services Edition leverages IBM PowerVM for IBM PowerLinux for efficient server virtualization. IBM PowerLinux Linux Application Services Edition PowerVM technology is designed to help IBM Power Systems servers deliver higher server utilization rates than VMware on x86. Running open source application workloads on a single server reduces costly IT administration, energy consumption, data center space, and other expenses associated with the deployment and maintenance of numerous servers. IBM can offer a superior economic model for workload consolidation on POWER7 servers with PowerVM software - a key driver behind recent migrations from Oracle (Sun) and HP to Power Systems technology.

IBM PowerVM for IBM PowerLinux offers advanced virtualization functionality and is offered exclusively on the IBM PowerLinux servers. IBM PowerVM for IBM PowerLinux's pricing structure delivers cost-effective virtualized workload environments. PowerVM technology is designed to provide secure and scalable virtualization and to control server and virtual image sprawl.

ISV industry and cross-industry solutions

IBM is working with worldwide ISVs like SAP along with regional ISVs to optimize and exploit integrated PowerVM virtualization functionality and superior performance of the PowerLinux 7R1 with their business application suites. In addition, a growing portfolio of thousands of applications is available from global and regional ISVs for the PowerLinux 7R1 server. To search for ISV applications available for the new PowerLinux 7R1 server along with the associated Linux distributions, refer to the IBM Global Solutions Directory

http://www-304.ibm.com/partnerworld/gsd/homepage.do

To view the full list of available applications that are compatible to run on the PowerLinux 7R1 server, use the following in your search criteria:

IBM Software

In addition, IBM Software provides a growing portfolio of solution stacks and services optimized for PowerLinux, including:

Accessibility by people with disabilities

A US Section 508 Voluntary Product Accessibility Template (VPAT) containing details on accessibility compliance can be requested at

http://www.ibm.com/able/product_accessibility/index.html

Section 508 of the US Rehabilitation Act

IBM PowerLinux 7R1 server is capable as of August 24, 2012, when used in accordance with associated IBM documentation, of satisfying the applicable requirements of Section 508 of the Rehabilitation Act, provided that any assistive technology used with the product properly interoperates with it. A U.S. Section 508 Voluntary Procduct Accessibility Template (VPAT) can be requested via de the IBM website

http://www.ibm.com/able/product_accessibility/index.html


Back to topBack to top
 
Top rule
Reference information
Bottom rule

New feature
Description                                        MT  Model Feature

 
IBM PowerVM for IBM PowerLinux                    1457  7FL     EC22

Business Partner information

If you are a Direct Reseller - System Reseller acquiring products from IBM , you may link directly to Business Partner information for this announcement. A PartnerWorld® ID and password are required (use IBM ID).

https://www.ibm.com/partnerworld/mem/sla.jsp?num=112-119


Back to topBack to top
 
Top rule
Publications
Bottom rule

IBM Power Systems hardware documentation provides you with the following topical information:

You can access the product documentation at

http://publib.boulder.ibm.com/infocenter/powersys/v3r1m5/index.jsp

Product documentation is also available on DVD (5K5T-7087).

The following information is shipped with the 8246-L1C:

Hardware documentation such as installation instructions, user's information, and service information is available to download or view at

http://www.ibm.com/systems/support

Visit the IBM System Support Site, which contains the documentation for the hardware

http://www.ibm.com/systems/support

The IBM Systems Information Center provides you with a single information center where you can access product documentation for IBM systems hardware, operating systems, and server software. Through a consistent framework, you can efficiently find information and personalize your access. The IBM Systems Information Center

http://publib14.boulder.ibm.com/infocenter/systems

IBM Publications Center Portal

http://www.ibm.com/shop/publications/order

The Publications Center is a worldwide central repository for IBM product publications and marketing material with a catalog of 70,000 items. Extensive search facilities are provided, as well as payment options via credit card. A large number of publications are available online in various file formats, which can currently be downloaded free of charge.



Back to topBack to top
 
Top rule
Services
Bottom rule

Global Technology Services

IBM services include business consulting, outsourcing, hosting services, applications, and other technology management.

These services help you learn about, plan, install, manage, or optimize your IT infrastructure to be an On Demand Business. They can help you integrate your high-speed networks, storage systems, application servers, wireless protocols, and an array of platforms, middleware, and communications software for IBM and many non-IBM offerings. IBM is your one-stop shop for IT support needs.

For details on available services, contact your IBM representative or visit

http://www.ibm.com/services/

For details on available IBM Business Continuity and Recovery Services, contact your IBM representative or visit

http://www.ibm.com/services/continuity

For details on education offerings related to specific products, visit

http://www.ibm.com/services/learning/index.html

Select your country, and then select the product as the category.



Back to topBack to top
 
Top rule
Technical information
Bottom rule

Specified operating environment

Physical specifications
Operating environment

Note: The maximum measured value is the worst case power consumption expected from a fully populated server under an intensive workload. The maximum measured value also accounts for component tolerance and non-ideal operating conditions. Power consumption and heat load vary greatly by server configuration and utilization. The IBM Systems Energy Estimator should be used to obtain a heat output estimate based on a specific configuration.
http://www-912.ibm.com/see/EnergyEstimator

Noise level and sound power (Preliminary data)

6.6 bels (Operating and idling)

EMC conformance classification:

This equipment is subject to FCC rules and shall comply with the appropriate FCC rules before final delivery to the buyer or centers of distribution.

Homologation -- Telecom environmental testing (Safety and EMC): Homologation approval for specific countries has been initiated with the IBM Homologation and Type Approval (HT&A) organization in LaGaude, France. This Power Systems model and applicable features meet the environmental testing requirements of the country telecom and have been designed and tested in compliance with the Full Quality Assurance Approval (FQAA) process as delivered by the British Approval Board for Telecom (BABT), the U.K. Telecom regulatory authority.

This product is not certified for connection by any means whatsoever to interfaces of public telecommunications networks. Certification may be required by law prior to making any such connection. Contact an IBM representative or reseller for any questions.

Product safety/Country testing/Certification:

General requirements:

The product is in compliance with IBM Corporate Bulletin C-B 0-2594-000 Statement of Conformity of IBM Product to External Standard (Suppliers Declaration).

Hardware requirements

PowerLinux 7R1 minimum system configuration

The PowerLinux 7R1 offers an 8-core configuration with one processor module. The PowerLinux 7R1 can contain up to 128 GB of system memory (64 GB maximum per memory riser card).

The PowerLinux 7R1 offers five PCIe x8 Gen2 slots and one PCIe x4 Gen2 low profile slots, and three or six SFF HDDs/SDDs and one or two media devices, depending on the storage back-plane selected.

PowerLinux 7R1 initial order must include a minimum of the following items:


Note: The following features are initial order only and are part of package ELBA:

 
       EL11     PCIe2 LP 4-port 1GbE Adapter
       EL15     8 GB (2x4 GB) Memory DIMMs, 1066 MHz, 2Gb DDR3 DRAM
                 (Zero-priced)
       EL16     16 GB (2x8 GB) Memory DIMMs, 1066 MHz, 2Gb DDR3 DRAM
                 (Zero-priced)
       EL17     32 GB (2x16 GB) Memory DIMMs, 1066 MHz, 2Gb DDR3 DRAM
                 (Zero-priced)
       EL0R     Storage Backplane -- 3 SFF Drives/SATA DVD/HH Tape
                 (Zero-priced)
       EL0T     Storage Backplane -- 6 SFF Drives/SATA DVD
                 (Zero-priced)
       EL0V     Storage Backplane -- 6 SFF Drives/SATA
                 DVD/RAID/External SAS Port (Zero-priced)
       EL0A     Memory Riser Card (Zero-priced)
       EPL5     8-core 3.55 GHz POWER7 Processor Module (Zero-priced)
       EPLA     Processor Activation for #EPL5 (Zero-priced)

Note: One nonfeaturized memory riser card is included in the base system. One additional memory riser card feature (#EL0K) can be ordered on the PowerLinux 7R1.

RAID

There are multiple protection options for HDD/SSD drives in the SAS SFF bays in PowerLinux 7R1 system units or drives in disk-only I/O drawers. Although protecting drives is always recommended, Linux users may choose to leave some or all drives unprotected at their own risk and IBM supports these configurations.

This HDD/SSD drive protection can be provided by Linux software or by the HDD or SSD hardware controllers. Mirroring of drives is provided by Linux software. In addition, Linux supports controllers providing RAID 0, 1, 5, 6, or 10. To further augment HDD/SSD protection, hot spare capability can be used for protected drives. Specific hot spare prerequisites apply.

An integrated SAS HDD/SSD controller is provided in the PowerLinux 7R1 system unit and provides support for JBOD and RAID 0, 1, and 10 for Linux . It is optionally augmented by RAID 5 and RAID 6 capability when storage backplane feature number EL0V is added to the configuration. Other disk/SSD controllers are provided as PCIe SAS adapters are supported. PCI Controllers with and without write cache are supported. RAID 5 and RAID 6 on controllers with write cache are supported.

Linux can use disk drives formatted with 512 byte blocks when being mirrored by the operating system. These disk drives must be reformatted to 528 byte sectors when used in RAID arrays. Although a small percentage of the drive's capacity is lost, additional data protection such as ECC and bad block detection is gained in this reformatting. For example, a 300 GB disk drive when reformatted provides around 283 GB. IBM Power SSDs are formatted to 528 bytes.

Software requirements

For software requirements for each feature number, visit

https://www-912.ibm.com/e_dir/eServerPrereq.nsf
Limitations

System

HMC machine code

Notes for Systems Director and VMControl:

If you are attaching an HMC to a new server or adding function to an existing server that requires a firmware update, the HMC machine code may need to be updated.

To determine the HMC machine code level required for the firmware level on any server, go to the following web page to access the Fix Level Recommendation Tool (FLRT) on or after the planned availability date for this product. FLRT will identify the correct HMC machine code for the selected system firmware level.

https://www14.software.ibm.com/webapp/set2/sas/f/hmc/home.html

If a single HMC is attached to multiple servers, the HMC machine code level must be updated to the server with the most recent firmware level. All prior levels of server firmware are supported with the latest HMC machine code level.

Boot requirements

Selecting feature 0837 will indicate boot from SAN.

Processor modules

Power supply

One 1725 watt ac power supply (1 x #5603) is required.

A second power supply is available for redundant power.

Redundant fans

Redundant fans standard

Power cords

One power cord is required. The PowerLinux 7R1 supports 100-127 V ac and 200-240 V ac power cords.

System memory

A minimum 32 GB is required on the PowerLinux 7R1. A system must be ordered with a minimum/maximum of 4 x #EL15, 2 x #EL16, or 1 x #EL17.

If more than 32 GB of memory is required, optional memory features EL1F, EL1G, and EL1H may be ordered.

Plans for future memory upgrades should be taken into account when deciding which memory feature size to use at the time of initial system order.

Memory features
 
                             Feature     Minimum     Maximum
        Feature              number      quantity    quantity
        
        8 GB 1066 Mhz        EL15            0           4
         (2 x 4 GB RDIMMs)
         (Zero priced)
 
        16 GB 1066 Mhz       EL16            0           2
         (2 x 8 GB RDIMMs)
         (Zero priced)
 
        32 GB 1066 Mhz       EL17            0           1
         (2 x 8 GB RDIMMs)
         (Zero priced)
 
 
        8 GB 1066 Mhz        EL1F            0           4
         (2 x 4 GB RDIMMs)
         (Reduced price)
 
        16 GB 1066 Mhz       EL1G            0           4
         (2 x 8 GB RDIMMs)
         (Reduced price)
 
        32 GB 1066 Mhz       EL1H            0           4
         (2 x 8 GB RDIMMs)
         (Reduced price)
 

PCI card slots

The PowerLinux 7R1 contains five x8 Gen2 slots and one x4 Gen2 PCIe Low Profile slot, which is restricted to the standard Ethernet adapter.

Graphics adapters

I/O adapters

I/O adapter features
 
                                  Orderable  Supported CEC Sys
                                  feature    feature   Max Max
I/O adapter                       number     number    qty qty  Size

PCIe LP RAID & SSD SAS A          2053                  2   2   LP
PCIe2 LP 4-port 1GbE Adapter      5260                  5   5   LP
PCIe LP POWER GXT145 Graphics Acc 5269                  4   4   LP
PCIe LP 10Gb FCoE 2-port Adapter  5270                  5   5   LP
PCIe LP 4-Port 10/100/1000 Base-T 5271                  5   5   LP
PCIe LP 10GbE CX4 1-port Adapter  5272                  5   5   LP
PCIe LP 2-Port 1GbE SX Adapter    5274                  5   5   LP
PCIe LP 10GbE SR 1-port Adapter   5275                  5   5   LP
PCIe LP 4-Port Async EIA-232 Adap 5277                  5   5   LP
PCIe2 LP 4-port 1/10GbE SFP+      5279                  5   5   LP
PCIe2 LP 4-port 1/10GbE SR        5280                  5   5   LP
PCIe2 LP PCIe2 2-port 4X IB QDR   5283                  5   5   LP
PCIe2 LP PCIe2 2-Port 10GbE SFP   5286                  5   5   LP
PCIe  LP 2-Port Async EIA 232     5290                  2   2   LP
PCIe LP 4 Gb 2-Port Fibre Channel EL09                  5   5   LP
PCIe LP 2-x4-port SAS Adapter 3Gb EL10                  5   5   LP
PCIe2 LP 4-port 1GbE Adapter ($0) EL11                  1   1   LP
PCIe2 LP 2-Port 10GbE RoCE SFP+   EL27                  5   5   LP
PCIe LP 8Gb 2-Port Fibre Channel  EL2N                  5   5   LP
PCIe2 LP PCIe2 2-port 10GbE SR    EL2P                  5   5   LP
PCIe2 LP 8Gb 4-port Fibre Channel EN0Y                  5   5   LP

Storage devices/bays

Storage device features
 
                                             Orderable
                        Maximum              feature
Device                  quantity   Bay       number

DVD-RAM (SATA)              1      Slim       5762
 
DAT160 80/160 GB Tape       1      Tape       EL01
USB Internal Docking Station
for Removable RDX Disk
Drive                       1      Tape       1123
 
 
 
                                             Orderable
                       Maximum               feature
Device                 quantity   Bay        number

177 GB SAS, SFF,           6      SFF 1-6    1775
 Solid-state
 
387 GB SAS, SFF,           6      SFF 1-6    ES0A
 Solid-state
 
300 GB 10K,                6      SFF 1-6    EL02
 SAS, SFF
 
146.8 GB 15K,              6      SFF 1-6    EL03
 SAS, SFF
 
600 GB 10K,                6      SFF 1-6    EL0P
 SAS, SFF
 
300 GB 15K,                6      SFF 1-6    EL0Z
 SAS, SFF
 
177 GB 1.8",               4      2 per      1995
 Solid-state, for #2053           #2053
 

Note: Six HDDs or SSDs maximum can be installed internally.

Planning information

Cable orders

No cables required.

Security, auditability, and control

This product uses the security and auditability features of host software and application software.

The customer is responsible for evaluation, selection, and implementation of security features, administrative procedures, and appropriate controls in application systems and communications facilities.



Back to topBack to top
 
Top rule
IBM Electronic Services
Bottom rule

IBM has transformed its delivery of hardware and software support services to help you achieve higher system availability. Electronic Services is a Web-enabled solution that offers an exclusive, no-additional-charge enhancement to the service and support available for IBM servers. These services are designed to provide the opportunity for greater system availability with faster problem resolution and preemptive monitoring. Electronic Services comprises two separate, but complementary, elements: Electronic Services news page and Electronic Services Agent.

The Electronic Services news page is a single Internet entry point that replaces the multiple entry points traditionally used to access IBM Internet services and support. The news page enables you to gain easier access to IBM resources for assistance in resolving technical problems.

The Electronic Service Agent is no-additional-charge software that resides on your server. It monitors events and transmits system inventory information to IBM on a periodic, client-defined timetable. The Electronic Service Agent automatically reports hardware problems to IBM . Early knowledge about potential problems enables IBM to deliver proactive service that may result in higher system availability and performance. In addition, information collected through the Service Agent is made available to IBM service support representatives when they help answer your questions or diagnose problems. Installation and use of IBM Electronic Service Agent for problem reporting enables IBM to provide better support and service for your IBM server.

To learn how Electronic Services can work for you, visit

http://www.ibm.com/support/electronic


Back to topBack to top
 
Top rule
Terms and conditions
Bottom rule

Volume orders: Contact your IBM representative.

IBM Global Financing

Yes

Warranty period

Three years.

An IBM part or feature installed during the initial installation of an IBM machine is subject to a full warranty effective on the date of installation of the machine. An IBM part or feature that replaces a previously installed part or feature assumes the remainder of the warranty period for the replaced part or feature. An IBM part or feature added to a machine without replacing a previously installed part or feature is subject to a full warranty effective on its date of installation. Unless specified otherwise, the warranty period, type of warranty service, and service level of a part or feature are the same as those for the machine in which it is installed.

Warranty service

If required, IBM provides repair or exchange service depending on the types of warranty service specified for the machine. IBM will attempt to resolve your problem over the telephone, or electronically via an IBM website. You must follow the problem determination and resolution procedures that IBM specifies. Scheduling of service will depend the time of your call and is subject to parts availability. If applicable to your product, parts considered Customer Replaceable Units (CRUs) will be provided as part of the machine's standard warranty service.

Service levels are response-time objectives and are not guaranteed. The specified level of warranty service may not be available in all worldwide locations. Additional charges may apply outside IBM's normal service area. Contact your local IBM representative or your reseller for country-specific and location-specific information.

CRU Service

IBM provides replacement CRUs to you for you to install. CRU information and replacement instructions are shipped with your machine and are available from IBM upon your request. CRUs are designated as being either a Tier 1 (mandatory) or a Tier 2 (optional) CRU.

Tier 1 (mandatory) CRU

Installation of Tier 1 CRUs, as specified in this announcement, is your responsibility. If IBM installs a Tier 1 CRU at your request, you will be charged for the installation.

Tier 2 (optional) CRU

You may install a Tier 2 CRU yourself or request IBM to install it, at no additional charge.

Based upon availability, CRUs will be shipped for next business day (NBD) delivery. IBM specifies, in the materials shipped with a replacement CRU, whether a defective CRU must be returned to IBM . When return is required, return instructions and a container are shipped with the replacement CRU. You may be charged for the replacement CRU if IBM does not receive the defective CRU within 15 days of your receipt of the replacement.

The following parts have been designated as Tier 1 CRUs:

On-site service

At IBM's discretion, you will receive specified CRU service, or IBM will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well lit, and suitable for the purpose.

Service level is 9 hours per day, Monday through Friday, excluding holidays, next-business-day response. Calls must be received by 5:00 p.m. local time in order to qualify for next business day response.

Non-IBM parts

Warranty service

IBM is now shipping machines with selected non-IBM parts that contain an IBM field replaceable unit (FRU) part number label. These parts are to be serviced during the IBM machine warranty period. IBM is covering the service on these selected non-IBM parts as an accommodation to their customers, and normal warranty service procedures for the IBM machine apply.

Warranty service upgrades

During the warranty period, warranty service upgrades provide an enhanced level of on-site service for an additional charge. A warranty service upgrade must be purchased during the warranty period and is for a fixed term (duration). It is not refundable or transferable and may not be prorated. If required, IBM will provide the warranty service upgrade enhanced level of on-site Service acquired by the customer. Service levels are response-time objectives and are not guaranteed. Refer to the Warranty service upgrades section for additional details.

IBM will attempt to resolve your problem over the telephone or electronically by access to an IBM website. Certain machines contain remote support capabilities for direct problem reporting, remote problem determination, and resolution with IBM . You must follow the problem determination and resolution procedures that IBM specifies. Following problem determination, if IBM determines on-site service is required, scheduling of service will depend upon the time of your call, machine technology and redundancy, and availability of parts.

On-site service

IBM will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well lit, and suitable for the purpose.

The service levels are:

Maintenance services

If required, IBM provides repair or exchange service depending on the types of maintenance service specified for the machine. IBM will attempt to resolve your problem over the telephone or electronically, via an IBM website. Certain machines contain remote support capabilities for direct problem reporting, remote problem determination, and resolution with IBM . You must follow the problem determination and resolution procedures that IBM specifies. Scheduling of service will depend upon the time of your call, machine technology and redundancy, and availability of parts. Service levels are response-time objectives and are not guaranteed. The specified level of maintenance service may not be available in all worldwide locations. Additional charges may apply outside IBM's normal service area. Contact your local IBM representative or your reseller for country-specific and location-specific information. The following service selections are available as maintenance options for your machine type.

IBM will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well lit, and suitable for the purpose.

The service levels are:

Customer Replaceable Unit (CRU) service

If your problem can be resolved with a CRU (for example, keyboard, mouse, speaker, memory, or hard disk drive), and depending upon the maintenance service offerings in your geography, IBM will ship the replacement CRU to you for you to install. CRU information and replacement instructions are shipped with your machine and are available from IBM upon your request.

Based upon availability, CRUs will be shipped for next business day delivery. IBM specifies, in the materials shipped with a replacement CRU, whether a defective CRU must be returned to IBM . When return is required:

CRUs may be provided as part of the machine's standard maintenance service except that you may install a CRU yourself or request IBM installation, at no additional charge, under any of the on-site service levels specified above.

Non-IBM parts service

Under certain conditions, IBM provides services for selected non-IBM parts at no additional charge for machines that are covered under warranty service upgrades or maintenance services.

This service includes hardware problem determination (PD) on the non-IBM parts (for example, adapter cards, PCMCIA cards, disk drives, memory) installed within IBM machines and provides the labor to replace the failing parts at no additional charge.

If IBM has a Technical Service Agreement with the manufacturer of the failing part, or if the failing part is an accommodations part (a part with an IBM FRU label), IBM may also source and replace the failing part at no additional charge. For all other non-IBM parts, customers are responsible for sourcing the parts. Installation labor is provided at no additional charge, if the machine is covered under a warranty service upgrade or a maintenance service.

Warranty service upgrades

Usage plan machine

No

IBM hourly service rate classification

Two

When a type of service involves the exchange of a machine part, the replacement may not be new, but will be in good working order.

Field-installable features

Yes

Model conversions

No

Machine installation

Customer setup. Customers are responsible for installation according to the instructions IBM provides with the machine.

Graduated program license charges apply

No

Licensed machine code

IBM Machine Code is licensed for use by a customer on the IBM machine for which it was provided by IBM under the terms and conditions of the IBM License Agreement for Machine Code, to enable the machine to function in accordance with its specifications, and only for the capacity authorized by IBM and acquired by the customer. You can obtain the agreement by contacting your IBM representative or visiting

http://www.ibm.com/servers/support/machine_warranties/machine_code.html
 
Machine using LMC Type Model
     8246-L1C

IBM may release changes to the machine code. IBM plans to make the machine code changes available for download from the IBM System p technical support website

http://www-933.ibm.com/support/fixcentral/

If the machine does not function as warranted and your problem can be resolved through your application of downloadable machine code, you are responsible for downloading and installing these designated machine code changes as IBM specifies. If you would prefer, you may request IBM to install downloadable machine code changes; however, you may be charged

Educational allowance

A reduced charge is available to qualified education customers. The educational allowance may not be added to any other discount or allowance.

The educational allowance is 18% for the products in this announcement.



Back to topBack to top
 
Top rule
Prices
Bottom rule

For additional information and current prices, contact your local IBM representative.

Product charges

The following are newly announced features on the specific models of the IBM Power Systems 8246 machine type:

                                                 Initial/
                                                 MES/
                     Model  Feature              Both/       RP
Description          Number Numbers              Support  CSU MES

 
IBM PowerLinux 7R2
                       L1C                                Yes

Linux Partition Specify
                       L1C     0266              Both     Yes No
V.24/EIA232 6.1m (20 Ft) PCI C
                       L1C     0348              Both     Yes No
V.35 6.1m (20 Ft) PCI Cable
                       L1C     0353              Both     Yes No
X.21 6.1m (20 Ft) PCI Cable
                       L1C     0359              Both     Yes No
SSD Placement Indicator CEC
                       L1C     0462              Both     Yes No
19 inch, 1.8 meter high rack
                       L1C     0551              MES      Yes No
19 inch, 2.0 meter high rack
                       L1C     0553              MES      Yes No
Rack Filler Panel Kit
                       L1C     0599              Both     Yes No
SAN Load Source Specify
                       L1C     0837              Both     Yes No

 US TAA Compliance Indicator
                       L1C     0983              Both     Yes No
 
USB External Docking Station R
                       L1C     1104              Both     Yes No
USB 500 GB Removable Disk Dr
                       L1C     1107              Both     Yes No
USB Internal Docking Station
                       L1C     1123              Both     Yes No
Custom Serv. Specify, Roch
                       L1C     1140              Both     Yes No
177GB SFF-1 SSD w/ eMLC AIX/Li
                       L1C     1775              Both     Yes No
System port/UPS Conversion Cab
                       L1C     1827              Both     Yes No
177GB SSD Module with eMLC (AI
                       L1C     1995              Both     No  No
PCIe LP RAID SSD SAS Adapter 3
                       L1C     2053              Both     Yes No
Primary Operating system Linux
                       L1C     2147              Both     Yes No
Factory Deconfiguration of 1 c
                       L1C     2319              Initial  N/A No
LC-SC 50 Micron Fiber Conv Cab
                       L1C     2456              Both     Yes No
LC-SC 62.5 Mic.Fib.Conv.Cable
                       L1C     2459              Both     Yes No
Asynch.Termin/Print.Cbl EIA232
                       L1C     2934              Both     Yes No
Asynchronous Cable EIA 232/V
                       L1C     2936              Both     Yes No
Ser to Ser Port Cab Draw/Draw
                       L1C     3124              Both     Yes No
Serial to Se.Port Cbl Rack 8M
                       L1C     3125              Both     Yes No
1m, QDR IB Copper Cable
                       L1C     3287              Both     Yes No
3m, QDR IB Copper Cable
                       L1C     3288              Both     Yes No
5m QDR IB/E'Net Copper Cable
                       L1C     3289              Both     Yes No
10m QDR IB Optic Cable
                       L1C     3290              Both     Yes No
30m QDR IB Optic Cable
                       L1C     3293              Both     Yes No

NOTE: The monitor or display features are subject to a $8 
 
Electronic Waste Recycling Fee (15- to 34-inch video device.)

Widescreen LCD Monitor
                       L1C     3632              Both     Yes No
0.3M Serial Prt Converter Cbl
                       L1C     3925              Both     Yes No
Serial Port Null Mod Cab 3.7M
                       L1C     3927              Both     Yes No
Ser.Port Null Modem Cable,10M
                       L1C     3928              Both     Yes No
System Serial Port Converter C
                       L1C     3930              Both     Yes No
6Foot Extend.Cbl for Displays
                       L1C     4242              Both     Yes No
Extender Cable USB Keybo 1.8M
                       L1C     4256              Both     Yes No
VGA to DVI Connection Converte
                       L1C     4276              Both     Yes No
Rack Integration Services: BP
                       L1C     4648              Initial  N/A No
Rack Integration Services
                       L1C     4649              Initial  N/A No
One and only one rack indicator feature is required on
all orders (#4650 to #4666).
No Factory Integration Ind.
                       L1C     4650              Initial  N/A No
Rack Indicator, Rack 1
                       L1C     4651              Initial  N/A No
Rack Indicator, Rack 2
                       L1C     4652              Initial  N/A No
Rack Indicator, Rack 3
                       L1C     4653              Initial  N/A No
Rack Indicator, Rack 4
                       L1C     4654              Initial  N/A No
Rack Indicator, Rack 5
                       L1C     4655              Initial  N/A No
Rack Indicator, Rack 6
                       L1C     4656              Initial  N/A No
Rack Indicator, Rack 7
                       L1C     4657              Initial  N/A No
Rack Indicator, Rack 8
                       L1C     4658              Initial  N/A No
Rack Indicator, Rack 9
                       L1C     4659              Initial  N/A No
Rack Indicator, Rack 10
                       L1C     4660              Initial  N/A No
Rack Indicator, Rack 11
                       L1C     4661              Initial  N/A No
Rack Indicator, Rack 12
                       L1C     4662              Initial  N/A No
Rack Indicator, Rack 13
                       L1C     4663              Initial  N/A No
Rack Indicator, Rack 14
                       L1C     4664              Initial  N/A No
Rack Indicator, Rack 15
                       L1C     4665              Initial  N/A No
Rack Indicator, Rack 16
                       L1C     4666              Initial  N/A No
Software Preload Required
                       L1C     5000              Initial  N/A No
PCIe2 LP 4-port 1GbE Adapter
                       L1C     5260              Both     Yes No
PCIe LP POWER GXT145 Graphics
                       L1C     5269              Both     Yes No
PCIe LP 10Gb FCoE 2 port Adapt
                       L1C     5270              Both     Yes No
PCIe LP 4 Port 10/100/1000 Bas
                       L1C     5271              Both     Yes No
PCIe LP 10GbE CX4 1 port Adapt
                       L1C     5272              Both     Yes No
PCIe LP 2 Port 1GbE SX Adapter
                       L1C     5274              Both     Yes No
PCIe LP 10GbE SR 1 port Adapt
                       L1C     5275              Both     Yes No
PCIe LP 4 Port Async EIA 232 A
                       L1C     5277              Both     Yes No
PCIe2 4Port 10GBE&1GBE SFP+ LP
                       L1C     5279              Both     Yes No
PCIe2 4-Port 10GbE&1GbE SR LP
                       L1C     5280              Both     Yes No
PCIe2 LP 2-Port 4X IB QDR Adap
                       L1C     5283              Both     Yes No
PCIe2 LP 2 Port 10GbE SFP Copp
                       L1C     5286              Both     Yes No
PCIe LP 2 Port Async EIA 232 A
                       L1C     5290              Both     Yes No
RFID Tags for Servers, Blades
                       L1C     5524              Initial  N/A No
System AC Power Supply, 1725 W
                       L1C     5603              Both     Yes No
SATA Slimline DVD RAM Drive
                       L1C     5762              Both     Yes No
Opt Front Door for 1.8m Rack
                       L1C     6068              MES      Yes No
Opt Front Door for 2.0m Rack
                       L1C     6069              MES      Yes No
1.8m Rack Acoustic Doors
                       L1C     6248              MES      Yes No
2.0m Rack Acoustic Doors
                       L1C     6249              MES      Yes No
1.8m Rack Trim Kit
                       L1C     6263              MES      Yes No
2.0m Rack Trim Kit
                       L1C     6272              MES      Yes No
Pwr Crd 4.3m 14ft Wall IBM PDU
                       L1C     6458              Both     Yes No
Pwr Crd (14FT), Drwr - OEM PDU
                       L1C     6460              Both     Yes No
Pwr Crd 4.3m 14ft Wall OEM PDU
                       L1C     6469              Both     Yes No
Pwr Crd 1.8m 6ft Wall 125V/15A
                       L1C     6470              Both     Yes No
Pwr Crd 2.7m 9ft Wall OEM PDU
                       L1C     6471              Both     Yes No
Pwr Crd 2.7m 9ft Wall OEM PDU
                       L1C     6472              Both     Yes No
Pwr Crd 2.7m 9ft Wall OEM PDU
                       L1C     6473              Both     Yes No
Pwr Crd 2.7m 9ft Wall OEM PDU
                       L1C     6474              Both     Yes No
Pwr Crd 2.7m 9ft Wall OEM PDU
                       L1C     6475              Both     Yes No
Pwr Crd 2.7m 9ft Wall OEM PDU
                       L1C     6476              Both     Yes No
Pwr Crd 2.7m 9ft Wall OEM PDU
                       L1C     6477              Both     Yes No
Pwr Crd 2.7m 9ft Wall OEM PDU
                       L1C     6478              Both     Yes No
Pwr Crd 2.7m 9ft Wall OEM PDU
                       L1C     6488              Both     Yes No
4.3m (14 Ft) 3PH/24A Power Cor
                       L1C     6489              MES      Yes No
4.3m (14 Ft) 1PH/48A Pwr Cord
                       L1C     6491              MES      Yes No
4.3m (14 Ft) 1PH/48 60A Pwr Co
                       L1C     6492              MES      Yes No
Pwr Crd 2.7m 9ft Wall OEM PDU
                       L1C     6493              Both     Yes No
Pwr Crd 2.7m 9ft Wall OEM PDU
                       L1C     6494              Both     Yes No
Pwr Crd 2.7m 9ft Wall 250V,10A
                       L1C     6496              Both     Yes No
Power Cable Drawer to IBM PD
                       L1C     6577              Both     Yes No
Optional Rack Security Kit
                       L1C     6580              MES      Yes No
Modem Tray for 19-Inch Rack
                       L1C     6586              MES      Yes No
Pwr Crd 2.7m 9ft Wall 125V,15A
                       L1C     6651              Both     Yes No
4.3m 1PH/24-30A Pwr Cord
                       L1C     6654              MES      Yes No
4.3m 14Ft 1PH/24 30A WR Pwr
                       L1C     6655              MES      Yes No
4.3m 14Ft 1PH/24A Power Cord
                       L1C     6656              MES      Yes No
Pwr.Cord(9ft),To Wall/OEM PDU
                       L1C     6659              Both     Yes No
Pwr Crd 14ft 4.3m WallOEM PDU
                       L1C     6660              Both     Yes No
Pwr Crd 2.8m 9.2ft Wall PDU
                       L1C     6665              Both     Yes No
Pwr Crd 4.3M, Drwr - OEM PDU
                       L1C     6669              Both     Yes No
Pwr Crd 2.7M, Drwr - IBM PDU
                       L1C     6671              Both     Yes No
Pwr Crd 1.5M, Drwr - IBM PDU
                       L1C     6672              Both     Yes No
Pwr Crd 2.7m 9ft Wall OEM PDU
                       L1C     6680              Both     Yes No
IIntelligent PDU+ 1 EIA Unit
                       L1C     7109              MES      Yes No
Environmental Monitoring Probe
                       L1C     7118              Both     Yes No
Power Distribution Unit
                       L1C     7188              MES      Yes No
Linux Software Preinstall
                       L1C     8143              Initial  N/A No
Linux Software Preinstall BP
                       L1C     8144              Initial  N/A No
USB Mouse
                       L1C     8845              Both     Yes No
Order Routing Indicator Syste
                       L1C     9169              Initial  N/A No
Language Group Spcf-US Eng
                       L1C     9300     NC       Initial  N/A No
New Red Hat Lic Core Counter
                       L1C     9442     NC       Initial  N/A No
New SUSE Lic Core Counter
                       L1C     9443     NC       Initial  N/A No
Other Linux Lic Core Counter
                       L1C     9445     NC       Initial  N/A No
3rd Party Linux Lic Core Cnt
                       L1C     9446     NC       Initial  N/A No
VIOperating system Core Counter
                       L1C     9447     NC       Initial  N/A No
Month Indicator
                       L1C     9461              Initial  N/A No
Day Indicator
                       L1C     9462              Initial  N/A No
Hour Indicator
                       L1C     9463              Initial  N/A No
Minute Indicator
                       L1C     9464              Initial  N/A No
Qty Indicator
                       L1C     9465              Initial  N/A No
Countable Member Indicator
                       L1C     9466              Initial  N/A No
Language Group Spcf-Dutch
                       L1C     9700     NC       Initial  N/A No
Language Group Spcf-French
                       L1C     9703     NC       Initial  N/A No
Language Group Spcf-German
                       L1C     9704     NC       Initial  N/A No
Language Group Spcf-Polish
                       L1C     9705     NC       Initial  N/A No
Lang Group Specify - Norwegian
                       L1C     9706     NC       Initial  N/A No
Lang.Group Spcf-Portuguese
                       L1C     9707     NC       Initial  N/A No
Language Group Spcf-Spanish
                       L1C     9708     NC       Initial  N/A No
Language Group Spcf-Italian
                       L1C     9711     NC       Initial  N/A No
Langua Gr Speci Canadian Frenc
                       L1C     9712     NC       Initial  N/A No
Language Group Spcf-Japanese
                       L1C     9714     NC       Initial  N/A No
Language Group Specify Tr Chin
                       L1C     9715     NC       Initial  N/A No
Language Group Spcf-Korean
                       L1C     9716     NC       Initial  N/A No
Language Group Spcf-Turkish
                       L1C     9718     NC       Initial  N/A No
Language Group Spcf-Hungarian
                       L1C     9719     NC       Initial  N/A No
Language Group Spcf-Slovakian
                       L1C     9720     NC       Initial  N/A No
Language Group Spcf-Russian
                       L1C     9721     NC       Initial  N/A No
Lang Group Spcf Simpl Chinese
                       L1C     9722     NC       Initial  N/A No
Language Group Spcf-Czech
                       L1C     9724     NC       Initial  N/A No
Language Group Spcf-Romanian
                       L1C     9725     NC       Initial  N/A No
Lang Group Specify - Croatian
                       L1C     9726     NC       Initial  N/A No
Language Group Spcf-Slovenian
                       L1C     9727     NC       Initial  N/A No
Lang Group Specify - Braz Port
                       L1C     9728     NC       Initial  N/A No
Lang Group Specify - Thai
                       L1C     9729     NC       Initial  N/A No
 
Full Width Key USB, US English
                       L1C     EK51              Both     Yes No
Full Width Key USB, French
                       L1C     EK52              Both     Yes No
Full WidthKey USB,Italian
                       L1C     EK53              Both     Yes No
Full Width Key USB, German/Aus
                       L1C     EK54              Both     Yes No
Full Width Key USB, UK English
                       L1C     EK55              Both     Yes No
Full Width Key USB, Spanish
                       L1C     EK56              Both     Yes No
Full Width Key USB, Japanese
                       L1C     EK57              Both     Yes No
Full Width Key USB, BrazilianP
                       L1C     EK58              Both     Yes No
Full Width Key USB, Hungarian
                       L1C     EK59              Both     Yes No
Full Width Key USB, Korean
                       L1C     EK60              Both     Yes No
Full Width Key USB, Chinese
                       L1C     EK61              Both     Yes No
Full Width Key USB, French Can
                       L1C     EK62              Both     Yes No
Full Width Key USB, Belgian/UK
                       L1C     EK64              Both     Yes No
Full Width Key USB, Swedish/Fi
                       L1C     EK65              Both     Yes No
Full Width Key USB, Danish
                       L1C     EK66              Both     Yes No
Full Width Key USB, Bulgarian
                       L1C     EK67              Both     Yes No
Full Width Key USB, Swiss/Fr/G
                       L1C     EK68              Both     Yes No
Full Width Key USB, Norwegian
                       L1C     EK69              Both     Yes No
Full Width Key USB, Dutch
                       L1C     EK70              Both     Yes No
Full Width Key USB, Portuguese
                       L1C     EK71              Both     Yes No
Full Width Key USB, Greek
                       L1C     EK72              Both     Yes No
Full Width Key USB, Hebrew
                       L1C     EK73              Both     Yes No
Full Width Key USB, Polish
                       L1C     EK74              Both     Yes No
Full Width Key USB, Slovakian
                       L1C     EK75              Both     Yes No
Full Width Key USB, Czech
                       L1C     EK76              Both     Yes No
Full Width Key USB, Turkish
                       L1C     EK77              Both     Yes No
Full Width Key USB, LA Spanish
                       L1C     EK78              Both     Yes No
Full Width Key USB, Arabic
                       L1C     EK79              Both     Yes No
Full Width Key USB, Thai
                       L1C     EK80              Both     Yes No
Full Width Key USB, Russian
                       L1C     EK81              Both     Yes No
Full Width Key USB, Slovenian
                       L1C     EK82              Both     Yes No
Full Width Key USB, US English
                       L1C     EK83              Both     Yes No
80/160GB Tape - PowerLinux
                       L1C     EL01              Both     Yes No
300GB 10K SFF Disk-PowerLinux
                       L1C     EL02              Both     Yes No
146GB 15K SFF Disk-PowerLinux
                       L1C     EL03              Both     Yes No
4Gb 2-port FCAL - PowerLinux
                       L1C     EL09              Both     Yes No
Memory Riser Card(Zero-priced)
                       L1C     EL0A              Initial  N/A No
Memory Riser Card - PowerLinux
                       L1C     EL0K              Both     Yes No
600GB 10K SFF Disk-PowerLinux
                       L1C     EL0P              Both     Yes No
Storage Backplane 6 SFF Dri
                       L1C     EL0R              Initial  N/A No
Storage Backplane 3 SFF Dri
                       L1C     EL0T              Initial  N/A No
Storage Backplane w/ext SAS
                       L1C     EL0V              Initial  N/A No
Backplane 6 SFFs -PowerLinux
                       L1C     EL0W              MES      Yes No
Backplane 3 SFFs -PowerLinux
                       L1C     EL0X              MES      Yes No
Backplane w/ext SAS-PowerLinux
                       L1C     EL0Y              MES      Yes No
GB 15K SFF Disk-PowerLinux
                       L1C     EL0Z              Both     Yes No
2-port SAS adapter -PowerLinux
                       L1C     EL10              Both     Yes No
PCIe2 LP 4-port 1GbE Adapter
                       L1C     EL11              Initial  N/A No
8GB (2x4GB) Memory-PowerLinux
                       L1C     EL15              Initial  N/A No
16GB (2x8GB) Memory-PowerLinux
                       L1C     EL16              Initial  N/A No
32GB (2x16GB) Memory-PowerLinu
                       L1C     EL17              Initial  N/A No
8GB (2x4GB) Memory-PowerLinux
                       L1C     EL1F              Both     Yes No
16GB (2x8GB) Memory-PowerLinux
                       L1C     EL1G              Both     Yes No
32GB (2x16GB) Memory-PowerLinu
                       L1C     EL1H              Both     Yes No
PCIe2 LP 2-Port 10GbE RoCE SFP
                       L1C     EL27              Both     Yes No
PCIe LP 8Gb 2 Port Fibre Chann
                       L1C     EL2N              Both     Yes No
PCIe2 LP 2 port 10GbE SR Adapt
                       L1C     EL2P              Both     Yes No
PowerLinux Base - 8c 3.55GHz
                       L1C     ELBA              Initial  N/A No
Trial Live Partition Mobility
                       L1C     ELPM              Both     Yes No
1m 10GbE Cable SFP+ Act Twinax
                       L1C     EN01              Both     Yes No
3m 10GbE Cable SFP+ Act Twinax
                       L1C     EN02              Both     Yes No
5m 10GbE Cable SFP+ Act Twinax
                       L1C     EN03              Both     Yes No
PCIe2 LP 8Gb 4-port Fibre Chan
                       L1C     EN0Y              Both     Yes No
8-core 3.55 GHz (Zero-priced)
                       L1C     EPL5              Initial  N/A No
EPL5 Proc Activ (Zero-priced)
                       L1C     EPLA              Initial  N/A No
RFID Tags for Compute Nodes
                       L1C     ERF1              Initial  N/A No
387GB SFF-1 SSD for AIX/Linux
                       L1C     ES0A              Both     Yes No
1TB Removable Disk Cartridge
                       L1C     EU01              Both     Yes No
RDX 320 GB Removable Disk Driv
                       L1C     EU08              Both     Yes No

The following are newly announced features on the specific models of the IBM Power Systems 1457 machine type:

                                                 Initial/
                                                 MES/
Description          Model  Feature              Both/        RP
Machine Type 1457    number numbers              Support  CSU MES

IBM PowerVM for IBM PowerLinux
                       7FL     EC22              Both     Yes No

Alternative and maintenance service

Pricing terms

Prices in the following PDF prices link are suggested list prices on day of announcement for the U.S. only. They are provided for your information only. Dealer prices may vary, and prices may also vary by country. IBM list price does not include tax or shipping and is subject to change without notice.

ENUS-112-119-LIST_PRICES_2012_07_10.PDF ENUS-112-119-LIST_PRICES_2012_07_10.PDF

ServicePac prices

For ServiceElect (ESA) maintenance service charges, contact IBM Global Services at 888-IBM-4343 (426-4343).

IBM Global Financing

IBM Global Financing offers competitive financing to credit-qualified customers to assist them in acquiring IT solutions. Offerings include financing for IT acquisition, including hardware, software, and services, from both IBM and other manufacturers or vendors. Offerings (for all customer segments: small, medium, and large enterprise), rates, terms, and availability can vary by country. Contact your local IBM Global Financing organization or visit

http://www.ibm.com/financing

IBM Global Financing offerings are provided through IBM Credit LLC in the United States, and other IBM subsidiaries and divisions worldwide to qualified commercial and government customers. Rates are based on a customer's credit rating, financing terms, offering type, equipment type, and options, and may vary by country. Other restrictions may apply. Rates and offerings are subject to change, extension, or withdrawal without notice.

IBM Global Financing offers competitive financing of hardware, software, and services, from both IBM and other manufacturers or vendors.

Financing Power Systems solutions from IBM Global Financing can help customers acquire more from existing budgets while helping them conserve cash, and provides a comprehensive end to end multi vendor IT financing solution. This end-to-end approach helps form the foundation of a cohesive technology management strategy that can be superior to ownership. We can help reduce costs compared to purchase, increase ROI, lower Total Cost of Ownership, minimize risk, improve accountability, and enable customers to focus on their core business strategies while giving customers the ability to make flexible equipment decisions throughout the entire technology life cycle.

Through our IBM Project Financing™ program, credit qualified customers can obtain funding to design and build their entire IT infrastructure, aligning up-front costs to expected project benefits. This could include financing for select facility design and construction, building and structural upgrades, infrastructure equipment, IT hardware, software, services and consulting. Through our Global Asset Recovery Services' buyback program customers can obtain cash for marketable IT assets and dispose of non-marketable assets in a way that complies with environmental laws and regulations.

IBM Global Financing offerings are provided through IBM Credit LLC in the United States, and other IBM subsidiaries and divisions worldwide to qualified commercial and government customers. For all customer segments offerings, rates, financing terms, offering type, equipment type, and options, may vary by country. Other restrictions may apply. Rates and offerings are subject to change, extension, or withdrawal without notice.

For more information contact your local IBM Global Financing organization or visit the website

http://www.ibm.com/financing


Back to topBack to top
 
Top rule
Order now
Bottom rule

To order, contact the Americas Call Centers or your local IBM representative, or your IBM Business Partner.

To identify your local IBM representative or IBM Business Partner, call 800-IBM-4YOU (426-4968).

Phone:      800-IBM-CALL (426-2255)
Fax:        800-2IBM-FAX (242-6329)
Internet:   callserv@ca.ibm.com
Mail:       IBM Teleweb Customer Support
            ibm.com® Sales Execution Center, Americas North
            3500 Steeles Ave. East, Tower 3/4
            Markham, Ontario
            Canada
            L3R 2Z1

Reference: YE001

The Americas Call Centers, our national direct marketing organization, can add your name to the mailing list for catalogs of IBM products.


Note: Shipments will begin after the planned availability date.
Trademarks

EnergyScale, IBM PowerLinux, Power Systems, Active Memory, GPFS, Systems Director VMControl, Electronic Service Agent, HACMP and IBM Project Financing are trademarks of IBM Corporation in the United States, other countries, or both.

IBM, POWER7, Power, PowerVM, Express, Micro-Partitioning, POWER6, POWER, InfoSphere, DB2, System p, pSeries, BladeCenter, PartnerWorld and ibm.com are registered trademarks of IBM Corporation in the United States, other countries, or both.

Linux is a registered trademark of Linus Torvalds in the United States, other countries, or both.

Other company, product, and service names may be trademarks or service marks of others.

Terms of use

IBM products and services which are announced and available in your country can be ordered under the applicable standard agreements, terms, conditions, and prices in effect at the time. IBM reserves the right to modify or withdraw this announcement at any time without notice. This announcement is provided for your information only. Additional terms of use are located at:

http://www.ibm.com/legal/us/en/

For the most current information regarding IBM products, consult your IBM representative or reseller, or visit the IBM worldwide contacts page

http://www.ibm.com/planetwide/us/

Share this page

Digg Linked In

Contact IBM

Feedback

-->