IBM PowerLinux 7R4 delivers unprecedented performance, scalability, reliability, and manageability for demanding commercial workloads

IBM United States Hardware Announcement 113-112
July 30, 2013


Table of contents
Overview Overview Publications Publications
Key prerequisites Key prerequisites Technical information Technical information
Planned availability date Planned availability date Terms and conditions Terms and conditions
Description Description Prices Prices
Statement of general direction Statement of general direction  Order now Order now
Product number Product number


Top rule
At a glance
Bottom rule

The IBM PowerLinux™ 7R4 (8248-L4T) server is a powerful 2-socket or 4-socket server that ships with 16 or 32 fully activated cores and I/O configuration flexibility to meet today's growth and tomorrow's processing needs. The server features:

For ordering, contact your IBM representative, an IBM Business Partner, or IBM Americas Call Centers at 800-IBM-CALL (Reference: SE001).



Back to topBack to top
 
Top rule
Overview
Bottom rule

The IBM PowerLinux 7R4 (8248-L4T) supports up to four POWER7+ processor dual chip modules (DCMs). Each of the four processor DCMs is an 8-core DCM packaged with 2 x 4-core chips. All 8-core processor DCMs are either 3.5 GHz or 4.0 GHz mounted on a dedicated card with a granularity of one DCM in a 19-inch rack-mount, 5U (EIA units) drawer configuration. Each POWER7+ processor DCM is a 64-bit, 8-core processor packaged on a dedicated card with a maximum of 64 DDR3 DIMMs, 10 MB of L3 cache per core, and 256 KB of L2 cache per core. A PowerLinux 7R4 can be populated with two or four DCMs, providing 16 or 32 cores. All the cores are active.

The PowerLinux 7R4 server supports a maximum of 64 DDR3 DIMM slots, 16 per 8-core processor DCM. Memory features (two memory DIMMs per feature) supported are 8, 16, and 32 GB and run at speeds of 1066 MHz. A system with four DCMs installed has a maximum memory of 1024 GB.

The PowerLinux 7R4 server delivers great I/O expandability. In addition to the six PCIe Gen2 slots in the system unit, up to four 12X-attached I/O drawers (#EL36 or #EL37) add up to 40 PCIe Gen1 slots. This set of PCI slots can provide extensive connectivity to LANs, switches, SANs, asynchronous devices, SAS storage, tape storage, and more. For example, more than 64 TB of SAS disk storage is supported.

The new 4-pack SSD package (#ESRA) offers ordering convenience and price savings for a new server order. A 4-pack SSD feature ESRA for the 7R4 system unit or EL36 I/O Drawer can provide up to 90,000 I/O operations per second (IOPS) in just 1/7th of 1U drawer. The 4-pack SSD must be ordered with the server, not as a later MES order.

The PowerLinux 7R4 server system unit includes six SFF SAS bays. This offers up to 5.4 TB HDD capacity or up to 3.6 TB SSD capacity. All SAS disks and SSDs are 2.5-inch SFF and hot swappable. The six SAS SFF bays can be split into two sets of three bays for additional configuration flexibility, using just the integrated SAS adapters.

Other integrated features include:



Back to topBack to top
 
Top rule
Key prerequisites
Bottom rule

Operating system:

For more information, refer to the Hardware requirements and Software requirements sections.



Back to topBack to top
 
Top rule
Planned availability date
Bottom rule

August 23, 2013



Back to topBack to top
 
Top rule
Description
Bottom rule

Summary of features

The following features are available on the PowerLinux 7R4 server:

Processors

Each system must have a minimum of eight active processors.

Memory

The minimum defined configuration is:

Feature number   Description

2 x EL3J         8-core 3.5 GHz POWER7+ Processor
EPT1             Processor & Memory Backplane
EPTR             Service Processor
8 x EL3L         8 x 1-core activation of #EL3J (No charge)
8 x EL3N         8 x  1-core activation of #EL3J
4 x EL2S         64 GB Memory
8 x EM01         Eight Memory Riser Cards
EPTS             Storage Backplane
1768             1X Integrated Multifunction Card
ELQK             146.8 GB 15k SFF DASD
2 x 5532         Two 1,925 watt ac power supplies, base
5771             SATA DVD-RAM
9300/97xx)       Language Group Specify
2147             Primary Operating System Indicator - Linux (#2147)
2 x 6xxx         Two Power Cords
 


Note: No internal DASD is required if feature 0837 (Boot from SAN) is selected. A Fibre Channel adapter must be ordered if feature 0837 is selected.

I/O drawer availability

Feature                                 Order                 Maximum
number   Description                    status     Interface  number

EL36     PCIe 12X I/O Drawer            Available    12X        4
          (with Disk Bays)
EL37     PCIe 12X I/O Drawer            Available    12X        4
         (No Disk Bays)
EL1S     EXP24S SFF Gen2-bay Drawer     Available    SAS       51
EL30     EXP30 Ultra SSD I/O Drawer     Available    SSD        2
 

The following feature-numbered I/O drawers are available for order on the PowerLinux 7R4 server:

EXP30 Ultra SSD I/O Drawer (#EL30) is a 1U high I/O drawer that enables 30 hot-swap SSD bays and a pair of integrated large write cache, high-performance SAS controllers. Ultra-high levels of performance are offered without using any PCIe slots on the POWER7® server in an ultra-dense packaging design. The two high-performance, integrated SAS controllers each physically provides 3.1 GB write cache. Working as a pair, they offer mirrored write cache data and controller redundancy. The cache contents are designed to be protected by built-in flash memory in case of power failure. If the pairing is broken, write cache is not used after existing cache content is written out to the drive and performance will probably be slowed until the controller pairing is reestablished.

Each controller is connected to a GX++ PCIe adapter in a server (for example, #1914) over a PCIe x8 cable such as feature EN05, EN07, or EN08. Usually both controllers are attached to one server, but each controller can be assigned to a different server or partition or VIOS. Active/Active capability is supported assuming at least two RAID arrays. The controllers deliver RAID 0, RAID 5, RAID 6, and RAID 10 Operating System mirroring is also available. The adapters' CCIN is 57C3. eMLC SSDs designed to fit in the Ultra drawer bays, such as the 387 GB feature EL34 SSD, are used. A minimum of six SSDs are required in each Ultra drawer. Each controller can access all 30 SSD bays. The bays can be configured as one set of bays run by a pair of controllers working together. Or the bays can be divided into two logical sets where each of the two controllers "owns" one of the logical sets. With proper software, if one of the controllers fails, the other controller can run both sets of bays.

12X I/O drawer cables

19-inch racks

The 8248-L4T and its I/O drawers are designed to mount in the 7014-T00, 7014-T42, feature 0551, and feature 0553 racks. These are built to the 19-inch EIA standard. When ordering a new 8248 system, you can order the appropriate 7014 rack model with the system hardware on the same initial order. IBM also makes the racks available as features of the 8248-L4T when you order additional I/O drawer hardware for an existing system (MES order). The rack features 0551 and 0553 should be used if you want IBM to integrate the newly ordered I/O drawer in a 19-inch rack before shipping the MES order.

The 8248-L4T has the following rack requirements:

1.8 Meter Rack (#0551)

This 36 EIA unit rack, delivered as feature 0551, is the same rack delivered when you order the 7014-T00 rack; the included features may be different. Some features that are delivered as part of the 7014-T00 must be ordered separately with the feature 0551. Order the feature 0551 only when required to support rack integration of MES orders prior to shipment from IBM Manufacturing.

2.0 Meter Rack (#0553)

This 42 EIA unit rack delivered as feature 0553 is the same rack delivered when you order the 7014-T42 or 7014-B42 rack; the included features may be different. Some features that are delivered as part of the 7014-T42 or 7014-B42 must be ordered separately with feature 0553. Order feature 0553 only when required to support rack integration of MES orders prior to shipment from IBM Manufacturing.

Integrated I/O

Disks, media, and boot devices

I/O slots and adapters

Power

Two ac power supplies are required for each CEC enclosure; the second power supply provides redundant power for enhanced system availability. A CEC enclosure will continue to function with one working power supply. A failed power supply can be hot swapped but must remain in the system until the replacement power supply is available for exchange.

Power distribution units

For systems installed in IBM 7014 or feature 055x racks, the following power distribution unit (PDU) rules apply (not all PDUs are available in all models of the 7014 or #055x):

To enable full redundancy, each server drawer has two power supplies that must be connected to separate PDUs.

Hot-plug options

Logical partitioning

Available backplane configurations

The PowerLinux 7R4 server CEC drawer has an extremely flexible and powerful backplane for supporting disk or SSDs. The six SFF bays can be configured in three different ways to match your business needs. Two built-in SAS controllers can be optionally augmented with a 175 MB Cache RAID Battery Card. Two embedded SAS disk/SSD controllers are provided for redundancy or for additional flexibility. The optional 175 MB Cache RAID - Dual IOA Enablement Card feature (#5662) enables dual 175 MB write cache and includes dual batteries for protection of that write cache.

The backplane can be configured as one set of six bays, two sets of three bays (3/3), or three sets of two bays (2/2/2). Configuration options will vary, depending upon the controller options and the operating system selected. The controllers for the six-bay or 3/3 configurations are always the two pairs of embedded controllers. If the 2/2/2 configuration is used, the two embedded controllers run the first two sets of bays (2/2) and a feature 5901 PCIe SAS adapter located in a PCIe slot in a CEC enclosure controls the third set (2). By having three controllers, you can have three boot drives supporting three partitions.

The following SSD/HDD configuration rules apply:

You can configure the two embedded controllers together as a pair for higher redundancy or you can configure them separately. If you configure them separately, they can be owned by different partitions or they could be treated independently within the same partition. If configured as a pair, they provide controller redundancy and can automatically switch over to the other controller if there are problems with one of the controllers. Also, if configured as a pair, both can be active at the same time (active/active) assuming there are two or more arrays configured, providing additional performance capability as well as redundancy. If configured as a pair, the pair controls all six SFF bays and all six drives. The 3/3 or 2/2/2 configurations are not used with the paired controllers. RAID 0 and RAID 10 are supported, and you can also mirror two sets of controller/drives using the operating system.

Adding the optional 175 MB Cache RAID - Dual IOA Enablement Card (#5662) causes the pair of embedded controllers in that processor enclosure to be configured as dual controllers accessing all six SAS bays. Without the feature 5662, each of the two controllers can access only two or three SAS bays. With the 175 MB Cache RAID - Dual IOA Enablement Card, you can get controller redundancy, additional RAID protection options, and additional I/O performance. RAID 5 (a minimum of three drives required) and RAID 6 (a minimum of four drives required) are available when configured as dual controllers with one set of six bays.

The system backplane also includes a third embedded controller for running the DVD-RAM drive in the CEC drawer. Because the controller is independent from the two SAS disk/SSD controllers, it allows the DVD to be switched between multiple partitions without affecting the assignment of disks or SSDs in

An EXP24S drawer can be connected to the SAS port on the rear of the PowerLinux 7R4 system unit assuming feature 5662 is installed. In this configuration the two integrated SAS controllers in the system unit run all 24 SAS bays of the EXP24S drawer plus the six SAS bays of the system unit. Feature 1819 (internal SAS cabling) and feature 5662 (write cache for the SAS controller) must both be installed to support this combined 30 bay configuration. Only HDD in these bays are supported with this option.



Back to topBack to top
 
Top rule
Reliability, availability, and serviceability (RAS)
Bottom rule

The reliability of the IBM PowerLinux 7R4 (8248-L4T) server starts with components, devices, and subsystems that are designed to be fault-tolerant. POWER7+ uses lower-voltage technology, improving reliability with stacked latches to reduce soft error (SER) susceptibility. During the design and development process, subsystems go through rigorous verification and integration testing processes. During system manufacturing, systems go through a thorough testing process to help ensure high product quality levels.

The processor and memory subsystem contain a number of features designed to avoid or correct environmentally induced, single-bit, intermittent failures as well as handle solid faults in components, including selective redundancy to tolerate certain faults without requiring an outage or parts replacement.

The Linux operating system supports disk drive mirroring (RAID 1). The adapter provides RAID 0, RAID 5, RAID 6, and RAID 10 for Linux .

Memory error-correction extensions

POWER7+ memory has error detection and correction code circuitry designed to detect and correct faults that extend across multiple memory modules (DRAMs). This includes tolerating a complete DRAM chip failure (Chipkill recovery). POWER7+ memory used in the PowerLinux 7R4 server system also contains a spare memory (DRAM) per rank of memory, which can be substituted for a failed DRAM module (DRAM sparing). The spares can be used when a DRAM fault is detected and offers additional protection beyond that provided by the error detection and correction circuitry. In addition, the POWER7+ memory subsystem scrubs memory to detect and correct intermittent errors.

The bus transferring data between the processor and the memory uses CRC error detection with a failed operation retry mechanism and the ability to dynamically retune bus parameters when a fault occurs. In addition, if a data bit goes bad, the memory bus has the spare capacity to substitute a new data bit-line.

Fault monitoring functions

On POWER7+ processor-based servers, hardware failures and software-detected hardware failures are recorded in the system log. An error log analysis (ELA) routine analyzes the error, forwards the event to the Service Focal Point™ (SFP) application running on the HMC, and notifies the system administrator that it has isolated a likely cause of the system problem. The service processor event log also records unrecoverable check stop conditions and forwards them to the SFP application and notifies the system administrator.

After the information is logged, if the system is properly configured, a call home service request is initiated, and the pertinent failure data with service parts information and part locations is sent to an IBM Service organization. Client contact information and specific system-related data, such as the machine type, model, and serial number along with engineering data related to the failure, are sent to IBM Service. The call home feature enables IBM service representatives to preemptively bring the most-probable replacement parts when a service call is placed, reducing repair time.

Disk drive fault tracking can alert the system administrator of an impending disk failure before it affects customer operation.

Mutual surveillance

The service processor monitors the operation of firmware during the boot process and also monitors the hypervisor for termination. The hypervisor monitors the service processor and performs a reset/reload if it detects the loss of the service processor. If the reset/reload does not correct the problem with the service processor, the hypervisor notifies the operating system, and the operating system can take appropriate action, including calling for service or initiating a failover operation to the alternate service processor if present.

Environmental monitoring functions

POWER7+ processor-based servers include a range of environmental monitoring functions:

POWER7+ processor availability enhancements

As in POWER6® , the POWER7+ processor can do processor instruction retry and alternate processor recovery for a number of core-related faults. This significantly reduces exposure to both hard (logic) and soft (transient) errors in the processor core. Soft failures in the processor core are transient (intermittent) errors, often due to cosmic rays or other sources of radiation, and generally are not repeatable. With this function, when an error is encountered in the core, the POWER7+ processor will first automatically retry the instruction. If the source of the error was truly transient, the instruction will succeed and the system will continue as before. On IBM systems prior to POWER6 , this error would have caused a checkstop.

Hard failures are more difficult, being true logical errors that will be replicated each time the instruction is repeated. Retrying the instruction will not help in this situation because the instruction will continue to fail. In a number of cases, systems with POWER7+ processors can extract the failing instruction from the faulty core and retry it elsewhere in the system for a number of faults, after which the failing core is dynamically deconfigured and called out for replacement. The entire process is transparent to the partition owning the failing instruction. These systems are designed to avoid a full system outage.

POWER7+ single processor check stopping

As in POWER6 , POWER7+ includes single processor check stopping for certain faults that cannot be handled by the availability enhancements described in the preceding section. This significantly reduces the probability of any one processor affecting total system availability.

Dynamic Fabric Bus Repair

For fabric busses connecting CEC drawers, this feature allows a faulty line on the fabric bus to be replaced by a spare dynamically, without the need to take down the system.

POWER7+ cache availability

The L2 and L3 caches in the POWER7+ processor are protected with double-bit detect, single-bit correct error detection code (ECC). In addition, the caches maintain a cache line delete capability. A threshold of correctable errors detected on a cache line can result in the data in the cache line being purged and the cache line removed from further operation without requiring a reboot. An ECC uncorrectable error detected in the cache can also trigger a purge and delete of the cache line. This results in no loss of operation if the cache line contained data unmodified from what was stored in system memory. Modified data would be handled through Special Uncorrectable Error handling. L1 data and instruction caches also have a retry capability for intermittent error and a cache set delete mechanism for handling solid failures. In addition, the POWER7+ processors can also dynamically substitute a faulty bit-line in an L3 cache dedicated to a processor with a spare bit-line.

PCI extended error handling

PCI extended error handling (EEH)-enabled adapters respond to a special data packet generated from the affected PCI slot hardware by calling system firmware, which examines the affected bus, enables the device driver to reset it, and continues without a system reboot. For Linux , EEH support extends to the majority of frequently used devices, although some third-party PCI devices may not provide native EEH support.

Predictive failure and dynamic component deallocation

Servers with POWER® processors have long been able to perform predictive failure analysis on certain critical components, such as processors and memory. When these components exhibit symptoms that would indicate a failure is imminent, the system can dynamically deallocate and call home about the failing part before the error is propagated system-wide. In many cases, the system will first attempt to reallocate resources in such a way that will avoid unplanned outages. In the event that insufficient resources exist to maintain full system availability, these servers will attempt to maintain partition availability by user-defined priority.

Uncorrectable error recovery

When the auto-restart option is enabled, the system can restart automatically following an unrecoverable software error, hardware failure, or environmentally induced (ac power) failure.

Serviceability

The IBM PowerLinux 7R4 (8248-L4T) server is designed with both IBM and customer serviceability in mind. Advancements such as Guiding Light LED architecture are used to control a system of integrated LEDs that lead the individual servicing the machine to the correct part as quickly as possible. With the PowerLinux 7R4 server, you can replace service parts (customer replaceable unit). To do this, the PowerLinux 7R4 server uses Guiding Light LEDs to indicate the parts that need to be replaced.

An HMC attached to the PowerLinux 7R4 server enables support personnel (with your authorization) to remotely log in to review error logs and perform remote maintenance if required.

The I/O device and adapter diagnostics consist of stand-alone diagnostics, which are loaded from the DVD-RAM drive, and online diagnostics. Online diagnostics, when installed, are resident with the AIX® operating system on the disk or system. They can be booted in single-user mode (service mode), run in maintenance mode, or run concurrently (concurrent mode) with other applications. They have access to the AIX error log and the AIX configuration data.


Note: Because the 8248-L4T system has an optional DVD-RAM (#5771), alternative methods for maintaining and servicing the system need to be available if the DVD-RAM is not ordered; an external Internet connection must be available to maintain or update system microcode to the latest required level.

Concurrent maintenance guided service procedures will continue to be supported by the Repair and Verify (R&V) component of the Service Focal Point application running on the HMC. Repair procedures that are not covered by the guided R&V component are documented and available for display on any web browser-enabled system as well as on the HMC. These procedures are available through the InfoCenter application.

Service environments

The HMC is a dedicated server that provides functions for configuring and managing servers for either partitioned or full-system partition using a GUI or command-line interface (CLI). An HMC attached to the system allows support personnel (with client authorization) to remotely log in to review error logs and perform remote maintenance if required.

Service Interface

Using the Service Interface, support personnel can communicate with the service support applications in a server using a console, interface, or terminal. Delivering a clear, concise view of available service applications, the Service Interface enables the support team to manage system resources and service information in an efficient and effective way. Applications available through the Service Interface are carefully configured and placed to give service providers access to important service functions.

Different service interfaces are used depending on the state of the system and its operating environment. The primary service interfaces are:

In the Guiding Light LED implementation, when a fault condition is detected on the POWER7+ system, an amber system fault LED is illuminated on the operator panel. The Guiding Light system pinpoints the exact part by blinking the amber field-replaceable unit (FRU) identify LED associated with the part to be replaced when selected by the servicer as part of the repair procedure. This action will roll up to the enclosure locate and blue system locate LED on the operator panel to provide a path from the system level to the enclosure and down to the individual component to be serviced.

The enclosure and system identify LEDs will turn on solid and can be used to follow the path from the system to the enclosure and down to the specific FRU.

First-failure data capture and error data analysis

First-failure data capture (FFDC) is a technique that helps ensure that when a fault is detected in a system, the root cause of the fault will be captured without the need to re-create the problem or run any sort of extended tracing or diagnostics program. For the vast majority of faults, a good FFDC design means that the root cause can also be detected automatically without servicer intervention. FFDC information, error data analysis, and fault isolation are necessary to implement the advanced serviceability techniques that enable efficient service of the systems and to help determine the failing items.

Error handling and reporting

In the unlikely event of system hardware or environmentally induced failure, the system runtime error capture capability systematically analyzes the hardware error signature to determine the cause of failure. The analysis result is stored in system NVRAM. When the system can be successfully restarted either manually or automatically, the error is reported to the operating system. Error log analysis (ELA) can be used to display the failure cause and the physical location of the failing hardware.

With the integrated service processor, the system can automatically send out an alert through a phone line to a pager or call for service in the event of a critical system failure. A hardware fault also turns on the amber System Fault LED located on the system unit to alert the user of an internal hardware problem. The indicator may also be set to blink by the operator as a tool to allow system identification. For identification, the blue locate LED on the enclosure and at the system level will turn on solid. The amber system fault LED will be on solid when an error condition occurs.

On POWER7+ processor-based servers, hardware and software failures are recorded in the system log. When an HMC is attached, an ELA routine analyzes the error, forwards the event to the Service Focal Point (SFP) application running on the HMC, and notifies the system administrator that it has isolated a likely cause of the system problem. The service processor event log also records unrecoverable checkstop conditions, forwards them to the SFP application, and notifies the system administrator. Once the information is logged in the SFP application, if the system is properly configured, a call home service request is initiated and the pertinent failure data with service parts information and part locations is sent to an IBM service organization. Client contact information and specific system-related data such as the machine type, model, and serial number, along with error log data related to the failure, are sent to IBM Service.

Service processor

The service processor can diagnose, check the status of, and sense the operational conditions of a system. It runs on its own power boundary and does not require resources from a system processor to be operational to perform its tasks.

The service processor supports surveillance of the connection to the HMC and to the system firmware (hypervisor). It also provides several remote power control options, environmental monitoring, reset, restart, remote maintenance, and diagnostic functions, including console mirroring. The service processor menus (ASMI) can be accessed concurrently with system operation, allowing nondisruptive abilities to change system default parameters.

Accessibility by people with disabilities

A US Section 508 Voluntary Product Accessibility Template (VPAT) containing details on accessibility compliance can be requested at

http://www.ibm.com/able/product_accessibility/index.html

Section 508 of the US Rehabilitation Act

PowerLinux 7R4 server is capable as of August 23, 2013, when used in accordance with associated IBM documentation, of satisfying the applicable requirements of Section 508 of the Rehabilitation Act, provided that any assistive technology used with the product properly interoperates with it. A US Section 508 Voluntary Product Accessibility Template (VPAT) can be requested through the IBM website

http://www-03.ibm.com/able/product_accessibility/index.html


Back to topBack to top
 
Top rule
Statement of general direction
Bottom rule

IBM intends to deliver increased flexibility to clients to exploit the performance, reliability and scale of enterprise-class Power® servers to reduce the cost of managing a Linux ecosystem. IBM plans to offer IT teams new, capacity on demand options to more affordably allocate and manage system resources being deployed exclusively to support Linux on Power applications and infrastructure.

IBM's statements regarding its plans, directions, and intent are subject to change or withdrawal without notice at IBM's sole discretion. Information regarding potential future products is intended to outline our general product direction and it should not be relied on in making a purchasing decision. The information mentioned regarding potential future products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. Information about potential future products may not be incorporated into any contract. The development, release, and timing of any future features or functionality described for our products remains at our sole discretion.



Back to topBack to top
 
Top rule
Product number
Bottom rule

The following are newly announced features on the specific models of the IBM Power Systems™ 8248 machine type:

                                                  Machine       Feature
Description                                       type  Model   number

PowerLinux 7R4                                    8248  L4T

 SDI Billing Adjustment Indicator                  8248  L4T     0005
 
Solution Delivery Integration (SDI) Order
One CSC Billing Unit                              8248  L4T     0010
Ten CSC Billing Units                             8248  L4T     0011

Linux Partition Specify                           8248  L4T     0266
V.24/EIA232 6.1m (20-Ft) PCI Cable                8248  L4T     0348
V.35 6.1m (20-Ft) PCI Cable                       8248  L4T     0353
X.21 6.1m (20-Ft) PCI Cable                       8248  L4T     0359

UPS Factory Integration Specify                   8248  L4T     0373
HMC Factory Integration Specify                   8248  L4T     0374
Display Factory Integration Specify               8248  L4T     0375
Reserve Rack Space for UPS                        8248  L4T     0376
Reserve Rack Space for HMC                        8248  L4T     0377
Reserve Rack Space for Display                    8248  L4T     0378
SSD Placement Indicator - CEC                     8248  L4T     0462
SSD Placement Indicator (5802/5803/EL36)          8248  L4T     0463
SSD Placement Indicator - 5887, EL1S              8248  L4T     0465
19 inch, 1.8 meter high rack                      8248  L4T     0551
19 inch, 2.0 meter high rack                      8248  L4T     0553
Rack Filler Panel Kit                             8248  L4T     0599
Power Cloud Integrated Solution Indicator For
Order Routing                                     8248  L4T     0712
Load Source Not in CEC                            8248  L4T     0719
Specify Load Source in #5802/#5803/#5877/EL36     8248  L4T     0726
Specify #5887 or #EL1S Load Source placement      8248  L4T     0728
Specify EXP30 Load Source placement               8248  L4T     0729
SAN Load Source Specify                           8248  L4T     0837
 US TAA Compliance Indicator                       8248  L4T     0983
 



Modem Cable - US/Canada and General Use           8248  L4T     1025
USB 500 GB Removable Disk Drive                   8248  L4T     1107
3m, Blue Cat5e Cable                              8248  L4T     1111
10m, Blue Cat5e Cable                             8248  L4T     1112
25m, Blue Cat5e Cable                             8248  L4T     1113
Decline Electronic Service Agent™ Install
Indicator                                         8248  L4T     1120
Custom Service Specify, Rochester Minn, USA       8248  L4T     1140
Integrated Multifunction card with Copper SFP+    8248  L4T     1768
Integrated Multifunction card with SR Optical     8248  L4T     1769
177GB SFF-1 SSD w/ eMLC (AIX/Linux)               8248  L4T     1775
GX++ 12X DDR Adapter, Dual-port                   8248  L4T     1808
SAS Cable for triple split DASD backplane         8248  L4T     1815
SAS Cable Assembly for SAS Port                   8248  L4T     1819
System port/UPS Conversion Cable                  8248  L4T     1827
1.5 Meter 12X to 4X Channel Conversion Cable      8248  L4T     1828
3 Meter 12X to 4X Channel Conversion Cable        8248  L4T     1841
10 Meter 12X to 4X Enhanced Channel Conversion
Cable                                             8248  L4T     1854
0.6 Meter 12X DDR Cable                           8248  L4T     1861
1.5 Meter 12X DDR Cable                           8248  L4T     1862
8.0 Meter 12X DDR Cable                           8248  L4T     1864
3.0 Meter 12X DDR Cable                           8248  L4T     1865
GX++ 2-port PCIe2 x8 Adapter                      8248  L4T     1914
177GB SSD Module with eMLC (AIX/Linux)            8248  L4T     1995
PCIe RAID & SSD SAS Adapter 3Gb w/ Blind Swap
Cassette                                          8248  L4T     2055
Primary OS - Linux                                8248  L4T     2147
Factory Deconfiguration of 1-core                 8248  L4T     2319
2M LC-SC 50 Micron Fiber Converter Cable          8248  L4T     2456
2M LC-SC 62.5 Micron Fiber Converter Cable        8248  L4T     2459
4 port USB PCIe Adapter                           8248  L4T     2728
PCIe 2-Line WAN w/Modem                           8248  L4T     2893

3M Asynchronous Terminal/Printer Cable EIA-232    8248  L4T     2934
Asynchronous Cable EIA-232/V.24 3M                8248  L4T     2936
Serial-to-Serial Port Cable for Drawer/Drawer-
3.7M                                              8248  L4T     3124
Serial-to-Serial Port Cable for Rack/Rack- 8M     8248  L4T     3125
1m, (3.3-ft) IB 40G Copper Cable QSFP/QSFP        8248  L4T     3287
3m, (9.8-ft.) IB 40G Copper Cable QSFP/QSFP       8248  L4T     3288
5m QDR IB/E'Net Copper Cable QSFP/QSFP            8248  L4T     3289
10 meter Quad Data Rate InfiniBand Optical
Cable, QSFP/QSFP                                  8248  L4T     3290
30 meter Quad Data Rate InfiniBand Optical
Cable, QSFP/QSFP                                  8248  L4T     3293
SAS Cable (EE) Drawer to Drawer 1M                8248  L4T     3652
SAS Cable (EE) Drawer to Drawer 3M                8248  L4T     3653
SAS Cable (EE) Drawer to Drawer 6M                8248  L4T     3654
SAS EX Cable 3m - Drawer to Drawer                8248  L4T     3675
SAS Cable (AI)- Adapter to Internal drive 1M      8248  L4T     3679
SAS EX Cable 6m - Drawer to Drawer                8248  L4T     3680
3M SAS CABLE, ADPTR TO ADPTR (AA)                 8248  L4T     3681
SAS Cable (AE) Adapter to Enclosure, single
controller/single path 3M                         8248  L4T     3684
SAS Cable (AE) Adapter to Enclosure, single
controller/single path 6M                         8248  L4T     3685
SAS Cable (AT) 0.6 Meter                          8248  L4T     3688
SAS AT Cable 0.6m - HD 6Gb Adapter to 12X
Enclosure (AT)                                    8248  L4T     3689
0.3M Serial Port Converter Cable, 9-Pin to 25-Pin 8248  L4T     3925
Serial Port Null Modem Cable, 9-pin to 9-pin,
3.7M                                              8248  L4T     3927
Serial Port Null Modem Cable, 9-pin to 9-pin, 10M 8248  L4T     3928
System Serial Port Converter Cable                8248  L4T     3930
1.8 M (6-ft) Extender Cable for Displays (15-pin
D-shell to 15-pin D-shell)                        8248  L4T     4242
Extender Cable - USB Keyboards, 1.8M              8248  L4T     4256
VGA to DVI Connection Converter                   8248  L4T     4276
Package 5X #2055 & 20X #1995 (AIX/Linux)          8248  L4T     4367
Rack Indicator- Not Factory Integrated            8248  L4T     4650
Rack Indicator, Rack #1                           8248  L4T     4651
Rack Indicator, Rack #2                           8248  L4T     4652
Rack Indicator, Rack #3                           8248  L4T     4653
Rack Indicator, Rack #4                           8248  L4T     4654
Rack Indicator, Rack #5                           8248  L4T     4655
Rack Indicator, Rack #6                           8248  L4T     4656
Rack Indicator, Rack #7                           8248  L4T     4657
Rack Indicator, Rack #8                           8248  L4T     4658
Rack Indicator, Rack #9                           8248  L4T     4659
Rack Indicator, Rack #10                          8248  L4T     4660
Rack Indicator, Rack #11                          8248  L4T     4661
Rack Indicator, Rack #12                          8248  L4T     4662
Rack Indicator, Rack #13                          8248  L4T     4663
Rack Indicator, Rack #14                          8248  L4T     4664
Rack Indicator, Rack #15                          8248  L4T     4665
Rack Indicator, Rack #16                          8248  L4T     4666
Software Preload Required                         8248  L4T     5000
PCIe2 2-port 10GbE SR Adapter                     8248  L4T     5287
PCIe2 2-Port 10GbE SFP+Copper Adapter             8248  L4T     5288
2 Port Async EIA-232 PCIe Adapter                 8248  L4T     5289
System AC Power Supply, 1925 W                    8248  L4T     5532
Blind Swap Type III Cassette- PCIe, Short Slot    8248  L4T     5646
Blind Swap Type III Cassette- PCI-X or PCIe,
Standard Slot                                     8248  L4T     5647
175MB Cache RAID - Dual IOA Enablement Card       8248  L4T     5662
10Gb FCoE PCIe Dual Port Adapter                  8248  L4T     5708
4-Port 10/100/1000 Base-TX PCI Express Adapter    8248  L4T     5717
PCIe2 8Gb 4-port Fibre Channel Adapter            8248  L4T     5729
10 Gigabit Ethernet-CX4 PCI Express Adapter       8248  L4T     5732
8 Gigabit PCI Express Dual Port Fibre Channel
Adapter                                           8248  L4T     5735
PCIe2 4-Port 10GbE&1GbE SR&RJ45 Adapter           8248  L4T     5744
PCIe2 4-Port 10GbE&1GbE SFP+Copper&RJ45 Adapter   8248  L4T     5745
POWER GXT145 PCI Express Graphics Accelerator     8248  L4T     5748
2-Port 10/100/1000 Base-TX Ethernet PCI Express
Adapter                                           8248  L4T     5767
2-Port Gigabit Ethernet-SX PCI Express Adapter    8248  L4T     5768
10 Gigabit Ethernet-SR PCI Express Adapter        8248  L4T     5769
SATA Slimline DVD-RAM Drive                       8248  L4T     5771
10 Gigabit Ethernet-LR PCI Express Adapter        8248  L4T     5772
4 Gigabit PCI Express Dual Port Fibre Channel
Adapter                                           8248  L4T     5774
4 Port Async EIA-232 PCIe Adapter                 8248  L4T     5785
PCIe 380MB Cache Dual - x4 3Gb SAS RAID Adapter   8248  L4T     5805
PCIe2 4-port 1GbE Adapter                         8248  L4T     5899
PCIe Dual-x4 SAS Adapter                          8248  L4T     5901
PCIe2 1.8GB Cache RAID SAS Adapter Tri-port 6Gb   8248  L4T     5913
Non-paired PCIe SAS RAID Indicator                8248  L4T     5923
Non-paired Indicator 5913 PCIe SAS RAID Adapter   8248  L4T     5924
Shared EXP30 Indicator                            8248  L4T     5925
SAS EX Cable 1.5m - Drawer to Drawer              8248  L4T     5926
Remote EXP30 Indicator                            8248  L4T     5927
Power Control Cable (SPCN) - 3 meter              8248  L4T     6006
Power Control Cable (SPCN) - 15 meter             8248  L4T     6007
Opt Front Door for 1.8m Rack                      8248  L4T     6068
Opt Front Door for 2.0m Rack                      8248  L4T     6069
1.8m Rack Acoustic Doors                          8248  L4T     6248
2.0m Rack Acoustic Doors                          8248  L4T     6249
1.8m Rack Trim Kit                                8248  L4T     6263
2.0m Rack Trim Kit                                8248  L4T     6272
Power Cord 4.3m (14-ft), Drawer to Wall/IBM PDU
(250V/10A)                                        8248  L4T     6458
Power Cord 4.3m (14-ft), Drawer To OEM PDU
(125V, 15A)                                       8248  L4T     6460
Power Cord 4.3m (14-ft), Drawer to Wall/OEM PDU
(250V/15A) U. S.                                  8248  L4T     6469
Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU
(125V/15A)                                        8248  L4T     6471
Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU
(250V/16A)                                        8248  L4T     6472
Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU
(250V/10A)                                        8248  L4T     6473
Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU,
(250V/13A)                                        8248  L4T     6474
Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU,
(250V/16A)                                        8248  L4T     6475
Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU,
(250V/10A)                                        8248  L4T     6476
Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU,
(250V/16A)                                        8248  L4T     6477
Power Cord 2.7 M(9-foot), To Wall/OEM PDU,
(250V, 16A)                                       8248  L4T     6478
Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU,
(125V/15A or 250V/10A )                           8248  L4T     6488
4.3m (14-Ft) 3PH/24A 380-415V Power Cord          8248  L4T     6489
4.3m (14-Ft) 1PH/48A 200-240V Power Cord          8248  L4T     6491
4.3m (14-Ft) 1PH/48-60A 200-240V Power Cord       8248  L4T     6492
Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU,
(250V/10A)                                        8248  L4T     6493
Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU,
(250V/10A)                                        8248  L4T     6494
Power Cord 2.7M (9-foot), To Wall/OEM PDU,
(250V, 10A)                                       8248  L4T     6496
Power Cable - Drawer to IBM PDU, 200-240V/10A     8248  L4T     6577
Optional Rack Security Kit                        8248  L4T     6580
Modem Tray for 19-Inch Rack                       8248  L4T     6586
Power Cord 2.7M (9-foot), To Wall/OEM PDU,
(125V, 15A)                                       8248  L4T     6651

4.3m (14-Ft) 1PH/24-30A Pwr Cord                  8248  L4T     6654
4.3m (14-Ft) 1PH/24-30A WR Pwr Cord               8248  L4T     6655
4.3m (14-Ft)1PH/24A Power Cord                    8248  L4T     6656


Power Cord 4.3m (14-ft), Drawer to Wall/OEM PDU
(125V/15A)                                        8248  L4T     6660
Power Cord 2.8m (9.2-ft), Drawer to Wall/IBM
PDU, (250V/10A)                                   8248  L4T     6665

Power Cord 4.3M (14-foot), Drawer to OEM PDU,
(250V, 15A)                                       8248  L4T     6669
Power Cord 2.7M (9-foot), Drawer to IBM PDU,
250V/10A                                          8248  L4T     6671
Power Cord 1.5M (5-foot), Drawer to IBM PDU,
250V/10A                                          8248  L4T     6672
Power Cord 2.7m (9-ft), Dawer to Wall/OEM PDU,
(250V/10A)                                        8248  L4T     6680
Intelligent PDU+, 1 EIA Unit, Universal UTG0247
Connector                                         8248  L4T     7109
Environmental Monitoring Probe                    8248  L4T     7118
Power Distribution Unit                           8248  L4T     7188
 SDI Software Pre-Install Indicator                8248  L4T     7305
 
Ethernet Cable, 15m, Hardware Management Console
to System Unit                                    8248  L4T     7802
PCI Blind Swap Cassette Kit, Double Wide
Adapters, Type III                                8248  L4T     7863
Linux Software Preinstall                         8248  L4T     8143
Linux Software Preinstall (Business Partners)     8248  L4T     8144
USB Mouse                                         8248  L4T     8845
Order Routing Indicator- System Plant             8248  L4T     9169
Language Group Specify - US English               8248  L4T     9300
specify mode-1 & (1)5901/5278 for EXP24S #5887/
EL1S                                              8248  L4T     9359
Specify mode-1 & (2)5901/5278 for EXP24S #5887/
EL1S                                              8248  L4T     9360
Specify mode-2 & (2)5901/5278 for EXP24S #5887/
EL1S                                              8248  L4T     9361
Specify mode-4 & (4)5901/5278 for EXP24S #5887/
EL1S                                              8248  L4T     9365
Specify mode-2 & (4)5901/5278 for EXP24S #5887/
EL1S                                              8248  L4T     9366
Specify mode-1 & (2)5903/5805 for EXP24S #5887/
EL1S                                              8248  L4T     9367
Specify mode-2 & (4)5903/5805 for EXP24S #5887/
EL1S                                              8248  L4T     9368
Specify mode-1 & CEC SAS port for EXP24 #5887/
EL1S                                              8248  L4T     9384
Specify mode-1 & (2) 5913 for EXP24S #5887/EL1S   8248  L4T     9385
Specify mode-2 & (4) 5913 for EXP24S #5887/EL1S   8248  L4T     9386
Specify Mode-1 & EXP30 for 1 EXP24S #5887/EL1S    8248  L4T     9388
New Red Hat License Core Counter                  8248  L4T     9442
New SUSE License Core Counter                     8248  L4T     9443
Other Linux License Core Counter                  8248  L4T     9445
3rd Party Linux License Core Counter              8248  L4T     9446
VIOS Core Counter                                 8248  L4T     9447
Month Indicator                                   8248  L4T     9461
Day Indicator                                     8248  L4T     9462
Hour Indicator                                    8248  L4T     9463
Minute Indicator                                  8248  L4T     9464
Qty Indicator                                     8248  L4T     9465
Countable Member Indicator                        8248  L4T     9466
Language Group Specify - Dutch                    8248  L4T     9700
Language Group Specify - French                   8248  L4T     9703
Language Group Specify - German                   8248  L4T     9704
Language Group Specify - Polish                   8248  L4T     9705
Language Group Specify - Norwegian                8248  L4T     9706
Language Group Specify - Portuguese               8248  L4T     9707
Language Group Specify - Spanish                  8248  L4T     9708
Language Group Specify - Italian                  8248  L4T     9711
Language Group Specify - Canadian French          8248  L4T     9712
Language Group Specify - Japanese                 8248  L4T     9714
Language Group Specify - Traditional Chinese
(Taiwan)                                          8248  L4T     9715
Language Group Specify - Korean                   8248  L4T     9716
Language Group Specify - Turkish                  8248  L4T     9718
Language Group Specify - Hungarian                8248  L4T     9719
Language Group Specify - Slovakian                8248  L4T     9720
Language Group Specify - Russian                  8248  L4T     9721
Language Group Specify - Simplified Chinese (PRC) 8248  L4T     9722
Language Group Specify - Czech                    8248  L4T     9724
Language Group Specify -- Romanian                8248  L4T     9725
Language Group Specify - Croatian                 8248  L4T     9726
Language Group Specify -- Slovenian               8248  L4T     9727
Language Group Specify - Brazilian Portuguese     8248  L4T     9728
Language Group Specify - Thai                     8248  L4T     9729
IBM PowerVM for IBM PowerLinux                    8248  L4T     EC22
0.6m (2.0-ft), Blue CAT5 Ethernet Cable           8248  L4T     ECB0
1.5m (4.9-ft), Blue CAT5 Ethernet Cable           8248  L4T     ECB2
Custom Service Specify, Shenzhen, China           8248  L4T     ECSC
Specify Mode-1 & (1)ESA1/ESA2 for EXP24S #5887
or #EL1S                                          8248  L4T     EJP1
Specify Mode-1 & (2)ESA1/ESA2 for EXP24S #5887
or #EL1S                                          8248  L4T     EJP2
Specify Mode-2 & (2)ESA1/ESA2 for EXP24S #5887
or #EL1S                                          8248  L4T     EJP3
Specify Mode-2 & (4)ESA1/ESA2 for EXP24S #5887
or #EL1S                                          8248  L4T     EJP4
Specify Mode-4 & (4)ESA1/ESA2 for EXP24S #5887
or #EL1S                                          8248  L4T     EJP5
Specify Mode-2 & (1)ESA1/ESA2 for EXP24S #5887
or #EL1S                                          8248  L4T     EJP6
Specify Mode-2 (2 )ESA1/ESA2 for EXP24 #5887 or
#EL1S                                             8248  L4T     EJP7
Specify mode-2 (1) ESA1/ESA2 for EXP24 #5887 or
#EL1S                                             8248  L4T     EJPA
Specify mode-2 (2)ESA1/ESA2 for EXP24#5887 or
#EL1S                                             8248  L4T     EJPB
Specify mode-4 (1)ESA1/ESA2 for EXP24 #5887 or
#EL1S                                             8248  L4T     EJPC
Specify mode-4 (2)ESA1/ESA2 for EXP24 #5887 or
#EL1S                                             8248  L4T     EJPD
Specify mode-4 (3)ESA1/ESA2 for EXP24 #5887 or
#EL1S                                             8248  L4T     EJPE
Specify mode-2 (1)5901/5278 for EXP24 #5887 or
#EL1S                                             8248  L4T     EJPJ
Specify mode-2 (2)5901/5278 for EXP24 #5887 or
#EL1S                                             8248  L4T     EJPK
Specify mode-4 (1)5901/5278 for EXP24 #5887 or
#EL1S                                             8248  L4T     EJPL
Specify mode-4 (2)5901/5278 for EXP24 #5887 or
#EL1S                                             8248  L4T     EJPM
Specify mode-4 (3)5901/5278 for EXP24 #5887 or
#EL1S                                             8248  L4T     EJPN
Specify mode-2 (2)5903/5805 for EXP24 #5887 or
#EL1S                                             8248  L4T     EJPR
Specify mode-2 (2)5913 for EXP24 #5887 or #EL1S   8248  L4T     EJPT
Specify Left Half 12X I/O Drawer (5802/5803/
EL36) to ESA1/ESA2                                8248  L4T     EJPY
Specify Right Half 12X I/O Drawer (5802/5803/
EL36) to ESA1/ESA2                                8248  L4T     EJPZ
Full Width Keyboard -- USB, US English, #103P     8248  L4T     EK51
Full Width Keyboard -- USB, French, #189          8248  L4T     EK52
Full Width Keyboard -- USB, Italian, #142         8248  L4T     EK53
Full Width Keyboard -- USB, German/Austrian, #129 8248  L4T     EK54
Full Width Keyboard -- USB, UK English, #166P     8248  L4T     EK55
Full Width Keyboard -- USB, Spanish, #172         8248  L4T     EK56
Full Width Keyboard -- USB, Japanese, #194        8248  L4T     EK57
Full Width Keyboard -- USB, Brazilian
Portuguese, #275                                  8248  L4T     EK58
Full Width Keyboard -- USB, Hungarian, #208       8248  L4T     EK59
Full Width Keyboard -- USB, Korean, #413          8248  L4T     EK60
Full Width Keyboard -- USB, Chinese, #467         8248  L4T     EK61
Full Width Keyboard -- USB, French Canadian, #445 8248  L4T     EK62
Full Width Keyboard -- USB, Belgian/UK, #120      8248  L4T     EK64
Full Width Keyboard -- USB, Swedish/Finnish, #153 8248  L4T     EK65
Full Width Keyboard -- USB, Danish, #159          8248  L4T     EK66
Full Width Keyboard -- USB, Bulgarian, #442       8248  L4T     EK67
Full Width Keyboard -- USB, Swiss/French/German,
#150                                              8248  L4T     EK68
Full Width Keyboard -- USB, Norwegian,#155        8248  L4T     EK69
Full Width Keyboard -- USB, Dutch, #143           8248  L4T     EK70
Full Width Keyboard -- USB, Portuguese, #163      8248  L4T     EK71
Full Width Keyboard -- USB, Greek, #319           8248  L4T     EK72
Full Width Keyboard -- USB, Hebrew, #212          8248  L4T     EK73
Full Width Keyboard -- USB, Polish, #214          8248  L4T     EK74
Full Width Keyboard -- USB, Slovakian, #245       8248  L4T     EK75
Full Width Keyboard -- USB, Czech, #243           8248  L4T     EK76
Full Width Keyboard -- USB, Turkish, #179         8248  L4T     EK77
Full Width Keyboard -- USB, LA Spanish, #171      8248  L4T     EK78
Full Width Keyboard -- USB, Arabic, #253          8248  L4T     EK79
Full Width Keyboard -- USB, Thai, #191            8248  L4T     EK80
Full Width Keyboard -- USB, Russian, #443         8248  L4T     EK81
Full Width Keyboard -- USB, Slovenian, #234       8248  L4T     EK82
Full Width Keyboard -- USB, US English Euro,
#103P                                             8248  L4T     EK83
300GB 10K RPM SFF SAS Disk Drive - PowerLinux     8248  L4T     EL02
146GB 15K RPM SFF SAS Disk Drive - PowerLinux     8248  L4T     EL03
600GB 10K RPM SAS SFF Disk Drive - PowerLinux     8248  L4T     EL0P
300GB 15K RPM SAS SFF Disk Drive - PowerLinux     8248  L4T     EL0Z
8GB (2x4GB) Memory DIMMs - 1066 MHz, 2Gb DDR3
DRAM                                              8248  L4T     EL1F
177GB SFF-2 SSD w/ eMLC (AIX/Linux)               8248  L4T     EL1K
387GB SFF-2 SSD for AIX/Linux with eMLC           8248  L4T     EL1L
146GB 15k RPM SAS SFF-2 Disk Drive (AIX/Linux)    8248  L4T     EL1M
300GB 10k RPM SAS SFF-2 Disk Drive (AIX/Linux)    8248  L4T     EL1N
300GB 15k RPM SAS SFF-2 Disk Drive (AIX/Linux)    8248  L4T     EL1P
600GB 10k RPM SAS SFF-2 Disk Drive (AIX/Linux)    8248  L4T     EL1Q
900GB 10k RPM SAS SFF-2 Disk Drive (Linux)        8248  L4T     EL1R
EXP24S SFF Gen2-bay Drawer                        8248  L4T     EL1S
SAS Cable (YO) Adapter to SAS Enclosure, Single
Controller/Dual Path 1.5 M                        8248  L4T     EL1T
SAS Cable (YO) Adapter to SAS Enclosure, Single
Controller/Dual Path 15 M                         8248  L4T     EL1U
SAS Cable (YO) Adapter to SAS Enclosure, Single
Controller/Dual Path 3 M                          8248  L4T     EL1V
SAS Cable (YO) Adapter to SAS Enclosure, Single
Controller/Dual Path 6 M                          8248  L4T     EL1W
SAS X Cable 15m - HD 3Gb 2-Adapter to Enclosure   8248  L4T     EL1X
SAS X Cable 10m - HD 6Gb 2-Adapter to Enclosure   8248  L4T     EL1Y
SAS X Cable 3m - HD 6Gb 2-Adapter to Enclosure    8248  L4T     EL1Z
SAS X Cable 6m - HD 6Gb 2-Adapter to Enclosure    8248  L4T     EL20
SAS Cable (X) Adapter to SAS Enclosure, Dual
Controller/Dual Path 15M:                         8248  L4T     EL21
SAS Cable (X) Adapter to SAS Enclosure, Dual
Controller/Dual Path 3M:                          8248  L4T     EL22
SAS Cable (X) Adapter to SAS Enclosure, Dual
Controller/Dual Path 6M:                          8248  L4T     EL23
SAS YO Cable 15m - HD 3Gb Adapter to Enclosure    8248  L4T     EL24
SAS YO Cable 1.5m - HD 6Gb Adapter to Enclosure   8248  L4T     EL25
SAS YO Cable 10m - HD 6Gb Adapter to Enclosure    8248  L4T     EL26
SAS YO Cable 6m - HD 6Gb Adapter to Enclosure     8248  L4T     EL28
SAS YO Cable 3m - HD 6Gb Adapter to Enclosure     8248  L4T     EL29
SAS AA Cable 0.6m - HD 6Gb Adapter to Adapter     8248  L4T     EL2A
SAS AA Cable 1.5m - HD 6Gb Adapter to Adapter     8248  L4T     EL2B
SAS AA Cable 3m - HD 6Gb Adapter to Adapter       8248  L4T     EL2C
SAS AA Cable 6m - HD 6Gb Adapter to Adapter       8248  L4T     EL2D
SAS Cable (YI) System to SAS Enclosure, Single
Controller/Dual Path 3M                           8248  L4T     EL2L
16GB (2x8GB) Memory DIMMs, 1066 MHz, 4Gb DDR3
DRAM                                              8248  L4T     EL2S
32GB (2x16GB) Memory DIMMs, 1066 MHz, 4Gb DDR3
DRAM                                              8248  L4T     EL2T
EXP30 Ultra SSD I/O Drawer                        8248  L4T     EL30
PCIe x8 Cable 1.5m                                8248  L4T     EL31
PCIe x8 Cable 3m                                  8248  L4T     EL32
387GB 1.8" SAS SSD for AIX/Linux with eMLC        8248  L4T     EL34
900GB 10K RPM SAS SFF Disk Drive (Linux)          8248  L4T     EL35
12X I/O Drawer PCIe, SFF disk                     8248  L4T     EL36
12X I/O Drawer PCIe, No Disk                      8248  L4T     EL37
3.5 GHz , 8-core POWER7+ Processor DCM (2x4-core) 8248  L4T     EL3J
1-core activation of #EL3J (No charge)            8248  L4T     EL3L
1-core activation of #EL3J                        8248  L4T     EL3N
Trial PowerVM Live Partition Mobility             8248  L4T     ELPM
Quantity 150 of #EL1K                             8248  L4T     ELQK
Quantity 150 of #EL1L                             8248  L4T     ELQL
Quantity 150 of #EL1M                             8248  L4T     ELQM
Quantity 150 of #EL1N                             8248  L4T     ELQN
Quantity 150 of #EL1P                             8248  L4T     ELQP
Quantity 150 of #EL1Q                             8248  L4T     ELQQ
Quantity 150 of #EL1R                             8248  L4T     ELQR
Memory Riser Card                                 8248  L4T     EM01
1m (3.3-ft), 10GbE'Net Cable SFP+ Act Twinax
Copper                                            8248  L4T     EN01
3m (9.8-ft), 10Gb E'Net Cable SFP+ Act Twinax
Copper                                            8248  L4T     EN02
5m (16.4-ft), 10Gb E'Net Cable SFP+ Act Twinax
Copper                                            8248  L4T     EN03
PCIe x8 Cable 8m                                  8248  L4T     EN08
PCIe2 16Gb 2-port Fibre Channel Adapter           8248  L4T     EN0A
PCIe2 4-port (10Gb FCoE & 1GbE) SR&RJ45           8248  L4T     EN0H
Integrated Multifunction Card w/ 10GbE RJ45 &
Copper Twinax                                     8248  L4T     EN10
Integrated Multifunction Card w/ 10GbE RJ45 & SR
Optical                                           8248  L4T     EN11
Processor & Memory Backplane                      8248  L4T     EPT1
Service Processor                                 8248  L4T     EPTR
Storage Backplane                                 8248  L4T     EPTS
Quanity 150 of #3452 SAS YO Cable 6m - HD 6Gb
Adapter to Enclosure                              8248  L4T     EQ02
Quantity 150 of #3453 SAS YO Cable 10m - HD 6Gb
Adapter to Enclosure                              8248  L4T     EQ03
Power Cable - Drawer to IBM PDU, 200-240V/10A     8248  L4T     EQ77
RFID Tags for Servers, Compute Nodes, Chassis,
Racks, and HMCs                                   8248  L4T     ERF1
Optional Front Door for Power 770 & 780 2.0m Rack 8248  L4T     ERG7
387GB SFF-1 SSD for AIX/Linux with eMLC           8248  L4T     ES0A
PCIe2 RAID SAS Adapter Dual-port 6Gb              8248  L4T     ESA1
S&H - No Charge                                   8248  L4T     ESC0
S&H                                               8248  L4T     ESC7
Four ES0A 387GB SFF-1 SSD for AIX/Linux with eMLC 8248  L4T     ESRA
1TB Removable Disk Drive Cartridge                8248  L4T     EU01
RDX USB External Docking Station for Removable
Disk Cartridge                                    8248  L4T     EU04
RDX 320 GB Removable Disk Drive                   8248  L4T     EU08
1.5TB Removable Disk Drive Cartridge              8248  L4T     EU15

The following are newly announced features on the specific models of the IBM Power Systems 7014, 7895, 8202, 8231, and 8268 machine type:

Planned availability date August 23, 2013

New features
                                                  Machine       Feature
Description                                       type  Model   number

 
PowerVM EE for Small Server                       7895  23X     EC21
                                                  8202  E4D
                                                  8231  E1D
                                                  8231  E2D
                                                   8268  E1D
 
Rack Content Specify: 8248-L4T                    7014  B42     ER0H
                                                  7014  T00
                                                  7014  T42

Model conversions

Not applicable.

Business Partner information

If you are a Direct Reseller - System Reseller acquiring products from IBM , you may link directly to Business Partner information for this announcement. A PartnerWorld® ID and password are required (use IBM ID).

https://www.ibm.com/partnerworld/mem/sla.jsp?num=113-112


Back to topBack to top
 
Top rule
Publications
Bottom rule

IBM Power Systems hardware documentation provides you with the following topical information:

System overview
Planning for the system
Installing and configuring the system
Working with consoles, terminals, and interfaces
Managing system resources
Working with operating systems and software applications
Troubleshooting, service, and support

Product documentation is available on a DVD (SK5T-7087), which is shipped with the PowerLinux 7R4 server, or you can access the product documentation at

http://publib.boulder.ibm.com/infocenter/powersys/v3r1m5/index.jsp


Back to topBack to top
 
Top rule
Services
Bottom rule

Global Technology Services

IBM services include business consulting, outsourcing, hosting services, applications, and other technology management.

These services help you learn about, plan, install, manage, or optimize your IT infrastructure to be an On Demand Business. They can help you integrate your high-speed networks, storage systems, application servers, wireless protocols, and an array of platforms, middleware, and communications software for IBM and many non-IBM offerings. IBM is your one-stop shop for IT support needs.

For details on available services, contact your IBM representative or visit

http://www.ibm.com/services/

For details on available IBM Business Continuity and Recovery Services, contact your IBM representative or visit

http://www.ibm.com/services/continuity

For details on education offerings related to specific products, visit

http://www.ibm.com/services/learning/index.html

Select your country, and then select the product as the category.



Back to topBack to top
 
Top rule
Technical information
Bottom rule

Specified operating environment

Physical specifications

IBM PowerLinux 7R4 (8248-L4T)

To assure installability and serviceability in non-IBM industry-standard racks, review the installation planning information for any product-specific installation requirements.

Operating environment
  1. Declared level LWAd is the upper-limit weighted average sound power level measured at the 1-meter bystander position.
  2. Declared level LpAm is the mean average weighted sound pressure level measured at the 1-meter bystander position.
  3. B and dB are abbreviations for bels and decibels, respectively where 1 B = 10 dB.
  4. All data is for 25° C (77° F) or below.
EMC conformance classification

This equipment is subject to FCC rules and shall comply with the appropriate FCC rules before final delivery to the buyer or centers of distribution.

Homologation -- Telecom Type Approval

Homologation approval for specific countries has been initiated with the IBM Homologation and Type Approval (HT&A) organization in LaGaude, France.

This product is not certified for connection by any means whatsoever to interfaces of public telecommunications networks. Certification may be required by law prior to making any such connection. Contact an IBM representative or reseller for any questions.

Product safety/Country testing/Certification
General requirements

The product is in compliance with IBM Corporate Bulletin C-B 0-2594-000 Statement of Conformity of IBM Product to External Standard (Suppliers Declaration).

Homologation

This product is not certified for direct connection by any means whatsoever to interfaces of public telecommunications networks. Certification may be required by law prior to making any such connection. Contact an IBM representative or reseller for any questions.

Hardware requirements

PowerLinux 7R4 server minimum system configuration

The PowerLinux 7R4 server ships with four 8-core processor DCMs. The system can contain up to 1024 GB of system memory (256 GB maximum per DCM processor), six PCIe 8x adapters, and both DASD and media devices. This flexibility is made available through the many optional features for the PowerLinux 7R4 server.

Each PowerLinux 7R4 server order must include a minimum of the following items:

RAID

There are multiple protection options for disk/SSD drives in the SAS SFF bays in PowerLinux 7R4 server system unit or drives in 12X attached I/O drawers or drives in disk-only I/O drawers. Although protecting drives is always recommended, users may choose to leave some or all drives unprotected at their own risk and IBM supports these configurations.

This disk/SSD drive protection can be provided by Linux software or by the disk/SSD hardware controllers. Mirroring of drives is provided by Linux software. In addition, Linux supports controllers providing RAID 0, 5, 6, or 10. To further augment disk/SSD protection, hot spare capability can be used for protected drives. Specific hot spare prerequisites apply.

An integrated SAS Disk/SSD controller is provided in the PowerLinux 7R4 server system unit. It is optionally augmented by a 175 MB write cache and RAID 5 and RAID 6 capability when feature 5679 is added to the configuration. Without feature 5679, the integrated controller supports system mirroring protection for Linux and also supports RAID 0 or 10 protection. Other disk/SSD controllers are provided as PCI adapters. PCI-X SCSI, PCI-X SAS, and PCIe SAS adapters are supported. PCI Controllers with and without write cache are supported. RAID 5 and RAID 6 on controllers with write cache are supported.

Linux can use disk drives formatted with 512 byte blocks when being mirrored by the operating system. These disk drives must be reformatted to 528 byte sectors when used in RAID arrays. Although a small percentage of the drive's capacity is lost, additional data protection such as ECC and bad block detection is gained in this reformatting. For example, a 300 GB disk drive when reformatted provides around 283 GB. IBM Power SSDs are formatted to 528 byte.

RAID 0 (minimum two drives) provides striping without parity for performance, but does not offer any fault tolerance. In data striping, data is broken down into several smaller, equally sized pieces. Each piece is then written to or read from multiple drives. This process increases I/O bandwidth by simultaneously accessing multiple data paths. Because RAID 0 does not offer any redundancy, a single drive failure can result in the loss of all data in a striped set. This means that all of the data on all the drives could be lost if even a single drive fails.


Note: RAID 0 drives can be mirrored by software to provide protection.

RAID 5 (minimum three drives) uses block-level data striping with distributed parity. RAID 5 stripes both data and parity information across three or more drives. Fault tolerance is maintained by ensuring that the parity information for any given block of data is placed on a drive separate from those used to store the data itself. RAID 5 requires N+1 drives to accommodate this parity data; thus the available storage capacity for each array is reduced by one drive to provide protection.

RAID 6 (minimum four drives) uses block-level data striping with dual distributed parity, the same as RAID 5 except RAID 6 uses a second level of independently calculated and distributed parity information for additional fault tolerance. This extra fault tolerance provides data security in the event two drives fail before a drive can be replaced. RAID 6 requires N+2 drives to accommodate the additional parity data.

RAID 10 is RAID 0 plus redundancy. In this type of implementation, an array with an even number of drives is created with mirrored pairs of drives within the array. A RAID 0 stripe set of data is created across the mirrored pairs for performance and for redundancy.

If a protected drive fails, the failing drive can be removed from its hot-plug bay and the drive replaced while the server and partition continue to run. The contents can then be re-created while the system continues to run. Note that until the drive is both replaced and its contents re-created, the protection provided using just mirroring or RAID 10 is absent for that drive's now unmirrored paired drive. Similarly, the entire RAID 5 array is unprotected until the failed drive is replaced and re-created. RAID 6 and hot spare were designed to provide additional protection.

Software requirements

If installing the Linux operating system (one of these):

Users should also update their systems with the latest Linux for Power service and productivity tools available from IBM's website

http://www14.software.ibm.com/webapp/set2/sas/f/lopdiags/home.html

If installing VIOS (one of these):

Limitations

System

Hardware management console (HMC) machine code

If attaching an HMC to a new server or adding function to an existing server that requires a firmware update, the HMC machine code may need to be updated.

To determine the HMC machine code level required for the firmware level on any server, go to the following web page to access the Fix Level Recommendation Tool (FLRT) on or after the planned availability date for this product. FLRT will identify the correct HMC machine code for the selected system firmware level

http://www14.software.ibm.com/webapp/set2/flrt/home

If a single HMC is attached to multiple servers, the HMC machine code level must be updated to the server with the most recent firmware level. All prior levels of server firmware are supported with the latest HMC machine code level.

Boot requirements

Processor and Memory Backplane (#EPT1)

Redundant fans: Standard

Power supply: The base machine must contain two ac power supplies (#5532).

Power cords

Two power cords are required.

System memory

Plans for future memory upgrades should be taken into account when deciding which memory feature size to use at the time of initial system order.

Figure 1. Memory features:

                     Feature     Minimum    Maximum
Feature              number      quantity   quantity

8 GB 1066 MHz         EL1F         0          32
(2 x 4 GB RDIMMs)
 
16 GB 1066 MHz        EL2S         0          32
(2 x 8 GB RDIMMs)
 
32 GB 1066 MHz        EL2T         0          32
(2 x 16 GB RDIMMs)

Drawer/Tower attachment:

The following list shows I/O drawers that are supported or available on the 8248 machine type and the correct interface to use for each of the drawers.

                                            Order
Feature Description                         Status     Interface

EL36    PCIe 12X I/O Drawer (W/Disk Bays)   Available    12X
EL37    PCIe 12X I/O Drawer (No Disk Bays)  Available    12X
EL1S    EXP24S SFF Gen2-bay Drawer          Available    SAS
EL30    EXP30 Ultra SSD I/O Drawer          Available    SSD

Maximum number of attached I/O drawers per system:

                                        Order                 Maximum
Feature  Description                    Status     Interface  number

EL36     PCIe 12X I/O Drawer            Available    12X        4
          (W/Disk Bays)
EL37     PCIe 12X I/O Drawer            Available    12X        4
         (No Disk Bays)
EL1S     EXP24S SFF Gen2-bay Drawer     Available    SAS       51
EL30     EXP30 Ultra SSD I/O Drawer     Available    SSD        2
 

I/O drawers are connected to the adapters in the CEC with the following data transfer cables:

PCIe card slots

The PowerLinux 7R4 server has a maximum of six PCIe 8x hot-plug slots.

Graphics adapters:

Planning information

Cable orders

No cables required.

Security, auditability, and control

This product uses the security and auditability features of host software and application software.

The customer is responsible for evaluation, selection, and implementation of security features, administrative procedures, and appropriate controls in application systems and communications facilities.



Back to topBack to top
 
Top rule
IBM Electronic Services
Bottom rule

Electronic Service Agent and the IBM Electronic Support web portal are dedicated to providing fast, exceptional support to IBM Systems customers. The IBM Electronic Service Agent tool is a no-additional-charge tool that proactively monitors and reports hardware events, such as system errors, performance issues, and inventory. The Electronic Service Agent tool can help you stay focused on your company's strategic business initiatives, save time, and spend less effort managing day-to-day IT maintenance issues. Servers enabled with this tool can be monitored remotely around the clock by IBM Support all at no additional cost to you.

Electronic Service Agent is designed to automatically and electronically report system failures and utilization issues to IBM , which can result in faster problem resolution and increased availability. System configuration and inventory information collected by the Electronic Service Agent tool also can be viewed on the secure Electronic Support web portal, and used to improve problem determination and resolution by you and the IBM support team. To access the tool main menu, simply type "smitty esa_main", and select "Configure Electronic Service Agent ." In addition, ESA now includes a powerful Web user interface, giving the administrator easy access to status, tool settings, problem information, and filters. For more information and documentation on how to configure and use Electronic Service Agent , refer to

http://www.ibm.com/support/electronic

The IBM Electronic Support portal is a single Internet entry point that replaces the multiple entry points traditionally used to access IBM Internet services and support. This portal enables you to gain easier access to IBM resources for assistance in resolving technical problems. The My Systems and Premium Search functions make it even easier for Electronic Service Agent tool-enabled customers to track system inventory and find pertinent fixes.

Benefits

Increased uptime: The Electronic Service Agent tool is designed to enhance the Warranty or Maintenance Agreement by providing faster hardware error reporting and uploading system information to IBM Support. This can translate to less wasted time monitoring the "symptoms," diagnosing the error, and manually calling IBM Support to open a problem record. Its 24 x 7 monitoring and reporting mean no more dependence on human intervention or off-hours customer personnel when errors are encountered in the middle of the night.

Security: The Electronic Service Agent tool is designed to be secure in monitoring, reporting, and storing the data at IBM . The Electronic Service Agent tool securely transmits either via the Internet (HTTPS or VPN) or modem, and can be configured to communicate securely through gateways to provide customers a single point of exit from their site. Communication is one way. Activating Electronic Service Agent does not enable IBM to call into a customer's system. System inventory information is stored in a secure database, which is protected behind IBM firewalls. It is viewable only by the customer and IBM . The customer's business applications or business data is never transmitted to IBM .

More accurate reporting: Since system information and error logs are automatically uploaded to the IBM Support center in conjunction with the service request, customers are not required to find and send system information, decreasing the risk of misreported or misdiagnosed errors. Once inside IBM , problem error data is run through a data knowledge management system and knowledge articles are appended to the problem record.

Customized support: Using the IBM ID entered during activation, customers can view system and support information in the "My Systems" and "Premium Search" sections of the Electronic Support website at

http://www.ibm.com/support/electronic

My Systems provides valuable reports of installed hardware and software using information collected from the systems by Electronic Service Agent . Reports are available for any system associated with the customer's IBM ID. Premium Search combines the function of search and the value of Electronic Service Agent information, providing advanced search of the technical support knowledgebase. Using Premium Search and the Electronic Service Agent information that has been collected from your system, customers are able to see search results that apply specifically to their systems.

For more information on how to utilize the power of IBM Electronic Services, contact your IBM Systems Services Representative, or visit

http://www.ibm.com/support/electronic


Back to topBack to top
 
Top rule
Terms and conditions
Bottom rule

Volume orders: Contact your IBM representative.

IBM Global Financing

Yes

Warranty period

One year. An IBM part or feature installed during the initial installation of an IBM machine is subject to a full warranty effective on the date of installation of the machine. An IBM part or feature that replaces a previously installed part or feature assumes the remainder of the warranty period for the replaced part or feature. An IBM part or feature added to a machine without replacing a previously installed part or feature is subject to a full warranty effective on its date of installation. Unless specified otherwise, the warranty period, type of warranty service, and service level of a part or feature are the same as those for the machine in which it is installed.

Warranty service

If required, IBM provides repair or exchange service. An IBM technician will attempt to resolve your problem over the telephone. You must follow IBM's problem determination and resolution procedures. Scheduling of service will depend upon the time of your call and is subject to parts availability. Service levels are response time objectives and are not guaranteed. The specified level of warranty service may not be available in all worldwide locations. Additional charges may apply outside IBM's normal service area. Contact your local IBM representative or your reseller for country- and location-specific information.

Service levels are response-time objectives and are not guaranteed. The specified level of warranty service may not be available in all worldwide locations. Additional charges may apply outside IBM's normal service area. Contact your local IBM representative or your reseller for country and location-specific information.

Customer replacement parts

Tier 1 CRUs are those parts which require minimal effort, skill, or experience in order to service. Tier 1 items are mandatory CRUs when base 9 x 5 next-business-day warranty or maintenance is specified in the terms and conditions contract and is in force. However, if the customer elects not to perform Tier 1 service, an IBM SSR may be contracted at an additional service charge to perform the service. If the customer has 7 x 24 warranty or maintenance in force, then all parts, Tier 1 and Tier 2, may be replaced or serviced by a SSR without an additional charge.

The following parts have been designated as Tier 1 CRUs:

Tier 2 CRUs require more effort than Tier 1 CRUs and also require a higher level of skill and/or experience when being serviced by the customer. As with Tier 1 parts, if the customer elects not to perform Tier service, an IBM SSR may be contracted at an additional service charge to perform the service. If the customer has 7 x 24 warranty or maintenance in force, then all parts will be replaced or serviced by an SSR without an additional charge.

The following parts have been designated as Tier 2 CRUs:

On-site Service

IBM will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well-lit, and suitable for the purpose.

Service level is:

This product is provided with a one year standard warranty. For your convenience, IBM has provided two additional years of extended warranty services to make this offering. Please consult with your advisors about the appropriate financial treatment for this offering. See your sales representative for other available service options.

Non-IBM parts service

IBM is now shipping machines with selected non-IBM parts that contain an IBM field replaceable unit (FRU) part number label. These parts are to be serviced during the IBM machine warranty period. IBM is covering the service on these selected non-IBM parts as an accommodation to their customers, and normal warranty service procedures for the IBM machine apply.

Warranty service upgrades

During the warranty period, warranty service upgrades provide an enhanced level of On-site Service for an additional charge. Service levels are response-time objectives and are not guaranteed. See the Warranty services Warranty service for additional details.

IBM will attempt to resolve your problem over the telephone or electronically by access to an IBM website. Certain Machines contain remote support capabilities for direct problem reporting, remote problem determination, and resolution with IBM . You must follow the problem determination and resolution procedures that IBM specifies. Following problem determination, if IBM determines on-site service is required, scheduling of service will depend upon the time of your call, machine technology and redundancy, and availability of parts.

Customer Replaceable Units (CRUs) may be provided as part of the machine's standard warranty CRU Service except that you may install a CRU yourself or request IBM installation, at no additional charge, under one of the On-site Service levels specified above. For additional information on the CRU Service, see the warranty information.

Customer replaceable unit service and on-site service for other selected parts

Customer replacement parts

Tier 1 CRUs are those parts which require minimal effort, skill, or experience in order to service. Tier 1 items are mandatory CRUs when base 9 x 5 next-business-day warranty or maintenance is specified in the terms and conditions contract and is in force. However, if the customer elects not to perform Tier 1 service, an IBM SSR may be contracted at an additional service charge to perform the service. If the customer has 7 x 24 warranty or maintenance in force, then all parts, Tier 1 and Tier 2, may be replaced or serviced by a SSR without an additional charge.

The following parts have been designated as Tier 1 CRUs:

Tier 2 CRUs require more effort than Tier 1 CRUs and also require a higher level of skill and/or experience when being serviced by the customer. As with Tier 1 parts, if the customer elects not to perform Tier service, an IBM SSR may be contracted at an additional service charge to perform the service. If the customer has 7 x 24 warranty or maintenance in force, then all parts will be replaced or serviced by an SSR without an additional charge.

The following parts have been designated as Tier 2 CRUs:

Maintenance services

If required, IBM provides repair or exchange service depending on the types of maintenance service specified for the machine. IBM will attempt to resolve your problem over the telephone or electronically, via an IBM website. Certain Machines contain remote support capabilities for direct problem reporting, remote problem determination, and resolution with IBM . You must follow the problem determination and resolution procedures that IBM specifies. Following problem determination, if IBM determines on-site service is required, scheduling of service will depend upon the time of your call, machine technology and redundancy, and availability of parts. Service levels are response-time objectives and are not guaranteed. The specified level of maintenance service may not be available in all worldwide locations. Additional charges may apply outside IBM's normal service area. Contact your local IBM representative or your reseller for country-specific and location-specific information. The following service selections are available as maintenance options for your machine type.

On-site Service

IBM will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well-lit, and suitable for the purpose. The following service selections are available as warranty upgrades for your machine type.

Service levels are:

Non-IBM parts service

Under certain conditions, IBM provides services for selected non-IBM parts at no additional charge for machines that are covered under warranty service upgrades or maintenance services.

This service includes hardware problem determination (PD) on the non-IBM parts (for example, adapter cards, PCMCIA cards, disk drives, memory) installed within IBM machines and provides the labor to replace the failing parts at no additional charge.

If IBM has a Technical Service Agreement with the manufacturer of the failing part, or if the failing part is an accommodations part (a part with an IBM FRU label), IBM may also source and replace the failing part at no additional charge. For all other non-IBM parts, customers are responsible for sourcing the parts. Installation labor is provided at no additional charge, if the machine is covered under a warranty service upgrade or a maintenance service.

Warranty service upgrades

Usage plan machine

No

IBM hourly service rate classification

Two

When a type of service involves the exchange of a machine part, the replacement may not be new, but will be in good working order.

Field-installable features

Yes

Model conversions

No

Machine installation

Customer setup. Customers are responsible for installation according to the instructions IBM provides with the machine.

Graduated program license charges apply

No

Licensed machine code

IBM Machine Code is licensed for use by a customer on the IBM machine for which it was provided by IBM under the terms and conditions of the IBM License Agreement for Machine Code, to enable the machine to function in accordance with its specifications, and only for the capacity authorized by IBM and acquired by the customer. You can obtain the agreement by contacting your IBM representative or visiting

http://www.ibm.com/servers/support/machine_warranties/machine_code.html

Access to Machine Code updates is conditioned on entitlement and license validation in accordance with IBM policy and practice. IBM may verify entitlement through customer number, serial number, electronic restrictions, or any other means or methods employed by IBM in its discretion.

If the machine does not function as warranted and your problem can be resolved through your application of downloadable machine code, you are responsible for downloading and installing these designated Machine Code changes as IBM specifies. If you would prefer, you may request IBM to install downloadable machine code changes; however, you may be charged for that service.

Educational allowance

A reduced charge is available to qualified education customers. The educational allowance may not be added to any other discount or allowance.

The educational allowance is 8% for the products in this announcement.



Back to topBack to top
 
Top rule
Prices
Bottom rule

For additional information and current prices, contact your local IBM representative.

The following are newly announced features on the specific models of the IBM Power Systems 8248 machine type:

                                             Minimum Initial/
                                             Monthly MES/
                     Model  Feature Purchase Maint.  Both/        RP
Description          number number  price    Charge  Support  CSU MES

PowerLinux 7R4
                       L4T                                    Yes
One CSC Billing Unit
                       L4T     0010                  Both     Yes No
Ten CSC Billing Units
                       L4T     0011                  Both     Yes No
Linux Partition Specify
                       L4T     0266                  Both     Yes No
V.24/EIA232 6.1m (20 Ft) PCI C
                       L4T     0348                  Both     Yes No
V.35 6.1m (20 Ft) PCI Cable
                       L4T     0353                  Both     Yes No
X.21 6.1m (20 Ft) PCI Cable
                       L4T     0359                  Both     Yes No
UPS Factory Integration Spcfy
                       L4T     0373                  MES      Yes No
HMC Factory Integration Spcfy
                       L4T     0374                  MES      Yes No
Display Factory Int. Specify
                       L4T     0375                  MES      Yes No
Rack Space for UPS
                       L4T     0376                  MES      Yes No
Reserve Rack for HMC
                       L4T     0377                  MES      Yes No
Reserve Rack Space for Display
                       L4T     0378                  MES      Yes No
SSD Placement Indicator CEC
                       L4T     0462                  Both     Yes No
SSD Placement Ind 5802/3,EL36
                       L4T     0463                  Initial  N/A No
SSD Placement Ind 5887,EL1S
                       L4T     0465                  Initial  N/A No
19 inch, 1.8 meter high rack
                       L4T     0551                  MES      Yes No
19 inch, 2.0 meter high rack
                       L4T     0553                  MES      Yes No
Rack Filler Panel Kit
                       L4T     0599                  Both     Yes No
Power Cloud Solution Indicator
                       L4T     0712                  Initial  N/A No
Load Source Not in CEC
                       L4T     0719                  Both     Yes No
Load Source 5802/3/77 & EL36
                       L4T     0726                  Both     Yes No
#5887/EL1S Load Source Specify
                       L4T     0728                  Both     Yes No
EXP30 Load Source Specify
                       L4T     0729                  Both     Yes No
SAN Load Source Specify
                       L4T     0837                  Both     Yes No
 US TAA Compliance Indicator
                       L4T     0983                  Both     Yes No
 
Modem Cable US/Canada and GU
                       L4T     1025                  Both     Yes No
USB 500 GB Removable Disk Dr
                       L4T     1107                  Both     Yes No
3m, Blue Cat5e Cable
                       L4T     1111                  Both     Yes No
10m, Blue Cat5e Cable
                       L4T     1112                  Both     Yes No
25m, Blue Cat5e Cable
                       L4T     1113                  Both     Yes No
Decline ESA Indicator
                       L4T     1120     NC           Initial  N/A No
Custom Serv. Specify, Roch
                       L4T     1140                  Both     Yes No
Quad ENET Card w Copper SFP+
                       L4T     1768                  Both     Yes No
Quad ENET Card w SR Optical
                       L4T     1769                  Both     Yes No
177GB SFF-1 SSD w/ eMLC AIX/Li
                       L4T     1775                  Support  Yes No
GX 12X DDR Adapter Dual port
                       L4T     1808                  Both     Yes No
SAS Cable for triple split DAS
                       L4T     1815                  Both     Yes No
SAS Cbl Assembly for SAS Port
                       L4T     1819                  Both     Yes No
System port/UPS Conversion Cab
                       L4T     1827                  Both     Yes No
1.5 Meter 12X to 4X Channel CC
                       L4T     1828                  Both     Yes No
3 Meter 12X to 4X Channel CC
                       L4T     1841                  Both     Yes No
10 Meter 12X to 4X Enhance CCC
                       L4T     1854                  Both     Yes No
0.6 Meter 12X DDR Cable
                       L4T     1861                  Both     Yes No
1.5 Meter 12X DDR Cable
                       L4T     1862                  Both     Yes No
8 Meter 12X DDR Cable
                       L4T     1864                  Both     Yes No
3.0 Meter 12X DDR Cable
                       L4T     1865                  Both     Yes No
GX++ 2-port PCIe2 x8 Adapter
                       L4T     1914                  Both     Yes No
177GB SSD Module with eMLC (AI
                       L4T     1995                  Support  No  No
PCIe RAID SSD SAS Adapter 3Gb
                       L4T     2055                  Support  Yes No
Primary OS Linux
                       L4T     2147                  Both     Yes No
Factory Deconfiguration of 1 c
                       L4T     2319                  Initial  N/A No
LC-SC 50 Micron Fiber Conv Cab
                       L4T     2456                  Both     Yes No
LC-SC 62.5 Mic.Fib.Conv.Cable
                       L4T     2459                  Both     Yes No
4 port USB PCIe Adapter
                       L4T     2728                  Both     Yes No
PCIe 2 Line WAN w/Modem
                       L4T     2893                  Initial  N/A No
Asynch.Termin/Print.Cbl EIA232
                       L4T     2934                  Both     Yes No
Asynchronous Cable EIA 232/V
                       L4T     2936                  Both     Yes No
Ser to Ser Port Cab Draw/Draw
                       L4T     3124                  Both     Yes No
Serial to Se.Port Cbl Rack 8M
                       L4T     3125                  Both     Yes No
1m, QDR IB Copper Cable
                       L4T     3287                  Both     Yes No
3m, QDR IB Copper Cable
                       L4T     3288                  Both     Yes No
5m QDR IB/E'Net Copper Cable
                       L4T     3289                  Both     Yes No
10m QDR IB Optic Cable
                       L4T     3290                  Both     Yes No
30m QDR IB Optic Cable
                       L4T     3293                  Both     Yes No
SAS Cable (EE) Drawer to Dr 1M
                       L4T     3652                  Both     Yes No
SAS Cable (EE) Drawer to Dr 3M
                       L4T     3653                  Both     Yes No
SAS Cable (EE) Drawer to Dr 6M
                       L4T     3654                  Both     Yes No
SAS EX cable 3M - Drw to Drw
                       L4T     3675                  Both     Yes No
SAS Cab (AI) Adapter to Int 1M
                       L4T     3679                  Both     Yes No
SAS EX Cable 6m - Drw to Drw
                       L4T     3680                  Both     Yes No
3M SAS CABLE, ADPTR TO ADPTR (
                       L4T     3681                  Both     Yes No
SAS Cab (AE) Adapter to En 3M
                       L4T     3684                  Both     Yes No
SAS Cable(AE) Adapter to En 6M
                       L4T     3685                  Both     Yes No
SAS Cable (AT) 0.6 Meter
                       L4T     3688                  Both     Yes No
SAS AT Cable 0.6m - HD 6Gb Ada
                       L4T     3689                  Both     Yes No
0.3M Serial Prt Converter Cbl
                       L4T     3925                  Both     Yes No
Serial Port Null Mod Cab 3.7M
                       L4T     3927                  Both     Yes No
Ser.Port Null Modem Cable,10M
                       L4T     3928                  Both     Yes No
System Serial Port Converter C
                       L4T     3930                  Both     Yes No
6Foot Extend.Cbl for Displays
                       L4T     4242                  Both     Yes No
Extender Cable USB Keybo 1.8M
                       L4T     4256                  Both     Yes No
VGA to DVI Connection Converte
                       L4T     4276                  Both     Yes No
Package 5X 2055 20X 1995
                       L4T     4367                  Support  Yes No
 
One and only one rack indicator feature is required on
all orders (#4650 to #4666).
No Factory Integration Ind.
                       L4T     4650                  Initial  N/A No
Rack Indicator, Rack 1
                       L4T     4651                  Initial  N/A No
Rack Indicator, Rack 2
                       L4T     4652                  Initial  N/A No
Rack Indicator, Rack 3
                       L4T     4653                  Initial  N/A No
Rack Indicator, Rack 4
                       L4T     4654                  Initial  N/A No
Rack Indicator, Rack 5
                       L4T     4655                  Initial  N/A No
Rack Indicator, Rack 6
                       L4T     4656                  Initial  N/A No
Rack Indicator, Rack 7
                       L4T     4657                  Initial  N/A No
Rack Indicator, Rack 8
                       L4T     4658                  Initial  N/A No
Rack Indicator, Rack 9
                       L4T     4659                  Initial  N/A No
Rack Indicator, Rack 10
                       L4T     4660                  Initial  N/A No
Rack Indicator, Rack 11
                       L4T     4661                  Initial  N/A No
Rack Indicator, Rack 12
                       L4T     4662                  Initial  N/A No
Rack Indicator, Rack 13
                       L4T     4663                  Initial  N/A No
Rack Indicator, Rack 14
                       L4T     4664                  Initial  N/A No
Rack Indicator, Rack 15
                       L4T     4665                  Initial  N/A No
Rack Indicator, Rack 16
                       L4T     4666                  Initial  N/A No
Software Preload Required
                       L4T     5000                  Initial  N/A No
PCIe2 2-port 10GbE SR Adapter
                       L4T     5287                  Both     Yes No
PCIe2 2-port 10GbE SFP+ Adaptr
                       L4T     5288                  Both     Yes No
2 Port Async EIA 232 PCIe Adap
                       L4T     5289                  Both     Yes No
System Pwr Sup -1925W
                       L4T     5532                  Initial  N/A No
Blind Swap Type III Cas PCIe
                       L4T     5646                  MES      Yes No
Blind Swap Type III Cas PCI X
                       L4T     5647                  MES      Yes No
175MB Cache RAID Dual IOA
                       L4T     5662                  Both     Yes No
10Gb FCoE PCIe Dual Port Adapt
                       L4T     5708                  Both     Yes No
4 Port 10/100/1000 Base TX PCI
                       L4T     5717                  Both     Yes No
PCIe2 8Gb 4-port Fibre Channel
                       L4T     5729                  Both     Yes No
10 Gigabit Ethernet CX4 PCI Ex
                       L4T     5732                  Support  Yes No
8 Gigabit PCI Express Dual Por
                       L4T     5735                  Both     Yes No
PCIe2 4-Port 10GbE&1GbE SR&RJ4
                       L4T     5744                  Both     Yes No
PCIe2 4-Port 10GbE&GbE SFP+Cop
                       L4T     5745                  Both     Yes No
POWER GXT145 PCI Express Graph
                       L4T     5748                  Both     Yes No
2 Port 10/100/1000 Base TX Eth
                       L4T     5767                  Both     Yes No
2 Port Gigabit Ethernet SX PCI
                       L4T     5768                  Both     Yes No
10 Gb Eth SR PCI Express Adp
                       L4T     5769                  Both     Yes No
SATA Slimline DVD-RAM Drive
                       L4T     5771                  Both     Yes No
10 Gigabit Ethernet LR PCI
                       L4T     5772                  Both     Yes No
4 Gigabit PCI Express Dual Por
                       L4T     5774                  Both     Yes No
4 Port Async EIA 232 PCIe Adap
                       L4T     5785                  Both     Yes No
PCIe 380MB Cache Dual x4 3Gb S
                       L4T     5805                  Both     Yes No
PCIe2 4-port 1GbE Adapter
                       L4T     5899                  Both     Yes No
PCIe Dual x4 SAS Adapter
                       L4T     5901                  Both     Yes No
PCIe2 1.8GB Cache RAID SAS Ada
                       L4T     5913                  Both     Yes No
Non paired PCIe SAS RAID Ind
                       L4T     5923                  Both     Yes No
Non-paired Indicator 5913 PCIe
                       L4T     5924                  Both     Yes No
Shared EXP30 Indicator
                       L4T     5925                  Both     Yes No
SAS EX Cable 1.5m - Drw to Drw
                       L4T     5926                  Both     Yes No
Remote EXP30 Indicator
                       L4T     5927                  Both     Yes No
Power Control Cbl (SPCN) 3 m
                       L4T     6006                  Both     Yes No
Power Control Cbl (SPCN) 15 m
                       L4T     6007                  Both     Yes No
Opt Front Door for 1.8m Rack
                       L4T     6068                  MES      Yes No
Opt Front Door for 2.0m Rack
                       L4T     6069                  MES      Yes No
1.8m Rack Acoustic Doors
                       L4T     6248                  MES      Yes No
2.0m Rack Acoustic Doors
                       L4T     6249                  MES      Yes No
1.8m Rack Trim Kit
                       L4T     6263                  MES      Yes No
2.0m Rack Trim Kit
                       L4T     6272                  MES      Yes No
Pwr Crd 4.3m 14ft Wall IBM PDU
                       L4T     6458                  Both     Yes No
Pwr Crd (14FT), Drwr - OEM PDU
                       L4T     6460                  Both     Yes No
Pwr Crd 4.3m 14ft Wall OEM PDU
                       L4T     6469                  Both     Yes No
Pwr Crd 2.7m 9ft Wall OEM PDU
                       L4T     6471                  Both     Yes No
Pwr Crd 2.7m 9ft Wall OEM PDU
                       L4T     6472                  Both     Yes No
Pwr Crd 2.7m 9ft Wall OEM PDU
                       L4T     6473                  Both     Yes No
Pwr Crd 2.7m 9ft Wall OEM PDU
                       L4T     6474                  Both     Yes No
Pwr Crd 2.7m 9ft Wall OEM PDU
                       L4T     6475                  Both     Yes No
Pwr Crd 2.7m 9ft Wall OEM PDU
                       L4T     6476                  Both     Yes No
Pwr Crd 2.7m 9ft Wall OEM PDU
                       L4T     6477                  Both     Yes No
Pwr Crd 2.7m 9ft Wall OEM PDU
                       L4T     6478                  Both     Yes No
Pwr Crd 2.7m 9ft Wall OEM PDU
                       L4T     6488                  Both     Yes No
4.3m (14 Ft) 3PH/24A Power Cor
                       L4T     6489                  MES      Yes No
4.3m (14 Ft) 1PH/48A Pwr Cord
                       L4T     6491                  MES      Yes No
4.3m (14 Ft) 1PH/48 60A Pwr Co
                       L4T     6492                  MES      Yes No
Pwr Crd 2.7m 9ft Wall OEM PDU
                       L4T     6493                  Both     Yes No
Pwr Crd 2.7m 9ft Wall OEM PDU
                       L4T     6494                  Both     Yes No
Pwr Crd 2.7m 9ft Wall 250V,10A
                       L4T     6496                  Both     Yes No
Power Cable Drawer to IBM PD
                       L4T     6577                  Both     Yes No
Optional Rack Security Kit
                       L4T     6580                  MES      Yes No
Modem Tray for 19-Inch Rack
                       L4T     6586                  MES      Yes No
Pwr Crd 2.7m 9ft Wall 125V,15A
                       L4T     6651                  Both     Yes No
4.3m 1PH/24-30A Pwr Cord
                       L4T     6654                  MES      Yes No
4.3m 14Ft 1PH/24 30A WR Pwr
                       L4T     6655                  MES      Yes No
4.3m 14Ft 1PH/24A Power Cord
                       L4T     6656                  MES      Yes No
Pwr Crd 14ft 4.3m WallOEM PDU
                       L4T     6660                  MES      Yes No
Pwr Crd 2.8m 9.2ft Wall PDU
                       L4T     6665                  Both     Yes No
Pwr Crd 4.3M, Drwr - OEM PDU
                       L4T     6669                  Both     Yes No
Pwr Crd 2.7m, Drwr - IBM PDU
                       L4T     6671                  Both     Yes No
Pwr Crd 1.5M, Drwr - IBM PDU
                       L4T     6672                  Both     Yes No
Pwr Crd 2.7m 9ft Wall OEM PDU
                       L4T     6680                  Both     Yes No
IIntelligent PDU+ 1 EIA Unit
                       L4T     7109                  MES      Yes No
Environmental Monitoring Probe
                       L4T     7118                  Both     Yes No
Power Distribution Unit
                       L4T     7188                  MES      Yes No
 AAP Software Pre-Inst.Indic.
                       L4T     7305                  Initial  N/A No

 
Eth Cbl 15M HW Management
                       L4T     7802                  Both     Yes No
PCI Blind Swap Cassette Kit
                       L4T     7863                  MES      Yes No
Linux Software Preinstall
                       L4T     8143                  Initial  N/A No
Linux Software Preinstall BP
                       L4T     8144                  Initial  N/A No
USB Mouse
                       L4T     8845                  Both     Yes No
Order Routing Indicator Syste
                       L4T     9169                  Initial  N/A No
Language Group Spcf-US Eng
                       L4T     9300     NC           Initial  N/A No
specify mode-1 & (1)5901/5278
                       L4T     9359                  Both     Yes No
Specify mode-1 & (2)5901/5278
                       L4T     9360                  Both     Yes No
Specify mode-2 & (2)5901/5278
                       L4T     9361                  Both     Yes No
Specify mode-4 & (4)5901/5278
                       L4T     9365                  Both     Yes No
Specify mode-2 & (4)5901/5278
                       L4T     9366                  Both     Yes No
Specify mode-1 & (2)5903/5805
                       L4T     9367                  Both     Yes No
Specify mode-2 & (4)5903/5805
                       L4T     9368                  Both     Yes No
Specify mode-1 & CEC SAS port
                       L4T     9384                  Both     Yes No
Specify mode-1 & (2) 5913 EXP
                       L4T     9385                  Both     Yes No
Specify mode-2 & (4) 5913 EXP
                       L4T     9386                  Both     Yes No
Mode-1 & EXP30 for 1 EXP24S #5
                       L4T     9388                  Both     Yes No
New Red Hat Lic Core Counter
                       L4T     9442     NC           Initial  N/A No
New SUSE Lic Core Counter
                       L4T     9443     NC           Initial  N/A No
Other Linux Lic Core Counter
                       L4T     9445     NC           Initial  N/A No
3rd Party Linux Lic Core Cnt
                       L4T     9446     NC           Initial  N/A No
VIOS Core Counter
                       L4T     9447     NC           Initial  N/A No
Month Indicator
                       L4T     9461                  Initial  N/A No
Day Indicator
                       L4T     9462                  Initial  N/A No
Hour Indicator
                       L4T     9463                  Initial  N/A No
Minute Indicator
                       L4T     9464                  Initial  N/A No
Qty Indicator
                       L4T     9465                  Initial  N/A No
Countable Member Indicator
                       L4T     9466                  Initial  N/A No
Language Group Spcf-Dutch
                       L4T     9700     NC           Initial  N/A No
Language Group Spcf-French
                       L4T     9703     NC           Initial  N/A No
Language Group Spcf-German
                       L4T     9704     NC           Initial  N/A No
Language Group Spcf-Polish
                       L4T     9705     NC           Initial  N/A No
Lang Group Specify - Norwegian
                       L4T     9706     NC           Initial  N/A No
Lang.Group Spcf-Portuguese
                       L4T     9707     NC           Initial  N/A No
Language Group Spcf-Spanish
                       L4T     9708     NC           Initial  N/A No
Language Group Spcf-Italian
                       L4T     9711     NC           Initial  N/A No
Langua Gr Speci Canadian Frenc
                       L4T     9712     NC           Initial  N/A No
Language Group Spcf-Japanese
                       L4T     9714     NC           Initial  N/A No
Language Group Specify Tr Chin
                       L4T     9715     NC           Initial  N/A No
Language Group Spcf-Korean
                       L4T     9716     NC           Initial  N/A No
Language Group Spcf-Turkish
                       L4T     9718     NC           Initial  N/A No
Language Group Spcf-Hungarian
                       L4T     9719     NC           Initial  N/A No
Language Group Spcf-Slovakian
                       L4T     9720     NC           Initial  N/A No
Language Group Spcf-Russian
                       L4T     9721     NC           Initial  N/A No
Lang Group Spcf Simpl Chinese
                       L4T     9722     NC           Initial  N/A No
Language Group Spcf-Czech
                       L4T     9724     NC           Initial  N/A No
Language Group Spcf-Romanian
                       L4T     9725     NC           Initial  N/A No
Lang Group Specify - Croatian
                       L4T     9726     NC           Initial  N/A No
Language Group Spcf-Slovenian
                       L4T     9727     NC           Initial  N/A No
Lang Group Specify - Braz Port
                       L4T     9728     NC           Initial  N/A No
Lang Group Specify - Thai
                       L4T     9729     NC           Initial  N/A No
IBM PowerVM for IBM PowerLinux
                       L4T     EC22                  Both     Yes No
0.6m Blue CAT5 Ethernet Cable
                       L4T     ECB0                  Both     Yes No
1.5m Blue CAT5 Ethernet Cable
                       L4T     ECB2                  Both     Yes No
Custom Serv. Specify, Shen
                       L4T     ECSC                  Both     Yes No
Mode-1 &(1)ESA1/ESA2-5887/EL1S
                       L4T     EJP1                  Both     Yes No
Mode-1 &(2)ESA1/ESA2-5887/EL1S
                       L4T     EJP2                  Both     Yes No
Mode-2 &(2)ESA1/ESA2-5887/EL1S
                       L4T     EJP3                  Both     Yes No
Mode-2 &(4)ESA1/ESA2-5887/EL1S
                       L4T     EJP4                  Both     Yes No
Mode-4 &(4)ESA1/ESA2-5887/EL1S
                       L4T     EJP5                  Both     Yes No
Mode-2 &(1)ESA1/ESA2-5887/EL1S
                       L4T     EJP6                  Both     Yes No
Mode-2 &(2)ESA1/ESA2-5887/EL1S
                       L4T     EJP7                  Both     Yes No
Mode-2 &(1)ESA1/ESA2-5887/EL1S
                       L4T     EJPA                  Both     Yes No
Mode-2 &(2)ESA1/ESA2-5887/EL1S
                       L4T     EJPB                  Both     Yes No
Mode-4 &(1)ESA1/ESA2-5887/EL1S
                       L4T     EJPC                  Both     Yes No
Mode-4 &(2)ESA1/ESA2-5887/EL1S
                       L4T     EJPD                  Both     Yes No
Mode-4 &(3)ESA1/ESA2-5887/EL1S
                       L4T     EJPE                  Both     Yes No
Mode-2 (1)5901/5278
                       L4T     EJPJ                  Both     Yes No
Mmode-2(2)5901/5278
                       L4T     EJPK                  Both     Yes No
Mode-4 (1)5901/5278
                       L4T     EJPL                  Both     Yes No
Mode-4 (2) 5901/5278
                       L4T     EJPM                  Both     Yes No
Mode-4 (3) 5901/5278
                       L4T     EJPN                  Both     Yes No
Mode-2 (2)5903/5805
                       L4T     EJPR                  Both     Yes No
Mode-2 (2) 5913
                       L4T     EJPT                  Both     Yes No
Spec Lft Half 5802/5803/EL36
                       L4T     EJPY                  Both     Yes No
Spec Rt Half 5802/5803/EL36
                       L4T     EJPZ                  Both     Yes No
Full Width Key USB, US English
                       L4T     EK51                  Both     Yes No
Full Width Key USB, French
                       L4T     EK52                  Both     Yes No
Full WidthKey USB,Italian
                       L4T     EK53                  Both     Yes No
Full Width Key USB, German/Aus
                       L4T     EK54                  Both     Yes No
Full Width Key USB, UK English
                       L4T     EK55                  Both     Yes No
Full Width Key USB, Spanish
                       L4T     EK56                  Both     Yes No
Full Width Key USB, Japanese
                       L4T     EK57                  Both     Yes No
Full Width Key USB, BrazilianP
                       L4T     EK58                  Both     Yes No
Full Width Key USB, Hungarian
                       L4T     EK59                  Both     Yes No
Full Width Key USB, Korean
                       L4T     EK60                  Both     Yes No
Full Width Key USB, Chinese
                       L4T     EK61                  Both     Yes No
Full Width Key USB, French Can
                       L4T     EK62                  Both     Yes No
Full Width Key USB, Belgian/UK
                       L4T     EK64                  Both     Yes No
Full Width Key USB, Swedish/Fi
                       L4T     EK65                  Both     Yes No
Full Width Key USB, Danish
                       L4T     EK66                  Both     Yes No
Full Width Key USB, Bulgarian
                       L4T     EK67                  Both     Yes No
Full Width Key USB, Swiss/Fr/G
                       L4T     EK68                  Both     Yes No
Full Width Key USB, Norwegian
                       L4T     EK69                  Both     Yes No
Full Width Key USB, Dutch
                       L4T     EK70                  Both     Yes No
Full Width Key USB, Portuguese
                       L4T     EK71                  Both     Yes No
Full Width Key USB, Greek
                       L4T     EK72                  Both     Yes No
Full Width Key USB, Hebrew
                       L4T     EK73                  Both     Yes No
Full Width Key USB, Polish
                       L4T     EK74                  Both     Yes No
Full Width Key USB, Slovakian
                       L4T     EK75                  Both     Yes No
Full Width Key USB, Czech
                       L4T     EK76                  Both     Yes No
Full Width Key USB, Turkish
                       L4T     EK77                  Both     Yes No
Full Width Key USB, LA Spanish
                       L4T     EK78                  Both     Yes No
Full Width Key USB, Arabic
                       L4T     EK79                  Both     Yes No
Full Width Key USB, Thai
                       L4T     EK80                  Both     Yes No
Full Width Key USB, Russian
                       L4T     EK81                  Both     Yes No
Full Width Key USB, Slovenian
                       L4T     EK82                  Both     Yes No
Full Width Key USB, US English
                       L4T     EK83                  Both     Yes No
300GB 10K SFF Disk-PowerLinux
                       L4T     EL02                  Both     Yes No
146GB 15K SFF Disk-PowerLinux
                       L4T     EL03                  Both     Yes No
600GB 10K SFF Disk-PowerLinux
                       L4T     EL0P                  Both     Yes No
300GB 15K SFF Disk-PowerLinux
                       L4T     EL0Z                  Both     Yes No
8GB (2x4GB) Memory-PowerLinux
                       L4T     EL1F                  Both     Yes No
177GB SFF-2 SSD w/ eMLC AIX/Li
                       L4T     EL1K                  Support  Yes No
387GB SFF-2 SSD for AIX/Linux
                       L4T     EL1L                  Both     Yes No
146GB 15k RPM SAS SFF-2 Disk
                       L4T     EL1M                  Both     Yes No
300GB 10k RPM SAS SFF-2 Disk
                       L4T     EL1N                  Both     Yes No
300GB 15k RPM SAS SFF-2 Disk
                       L4T     EL1P                  Both     Yes No
600GB 10k RPM SAS SFF-2 Disk
                       L4T     EL1Q                  Both     Yes No
900GB 10k RPM SAS SFF-2 Disk
                       L4T     EL1R                  Both     Yes No
EXP24S SFF Gen2-bay Drawer
                       L4T     EL1S                  Both     Yes No
SAS Cab(YO) Adapter to SAS1.5M
                       L4T     EL1T                  Both     Yes No
SAS Cab(YO) Adapter to SAS 15M
                       L4T     EL1U                  Both     Yes No
SAS Cab(YO) Adapter to SAS 3M
                       L4T     EL1V                  Both     Yes No
SAS Cab(YO) Adapter to SAS 6M
                       L4T     EL1W                  Both     Yes No
SAS X Cable 15m - HD 3Gb 2-Ada
                       L4T     EL1X                  Both     Yes No
SAS X Cable 10m - HD 6Gb 2-Ada
                       L4T     EL1Y                  Both     Yes No
SAS X Cable 3m - HD 6Gb 2-Adap
                       L4T     EL1Z                  Both     Yes No
SAS X Cable 6m - HD 6Gb 2-Adap
                       L4T     EL20                  Both     Yes No
SAS Cbl X Adp SAS Encl 15M
                       L4T     EL21                  Both     Yes No
SAS Cable (X) Adapter to SAS E
                       L4T     EL22                  Both     Yes No
SAS Cbl X Adp SAS Enclosure 6M
                       L4T     EL23                  Both     Yes No
SAS YO Cable 15m - HD 3Gb Adap
                       L4T     EL24                  Both     Yes No
SAS YO Cable 1.5m - HD 6Gb Ada
                       L4T     EL25                  Both     Yes No
SAS YO Cable 10m - HD 6Gb Adap
                       L4T     EL26                  Both     Yes No
SAS YO Cable 6m - HD 6Gb Adapt
                       L4T     EL28                  Both     Yes No
SAS YO Cable 3m - HD 6Gb Adapt
                       L4T     EL29                  Both     Yes No
SAS AA Cbl 0.6m - HD 6Gb Adapt
                       L4T     EL2A                  Both     Yes No
SAS AA Cable 1.5m - HD 6Gb Ada
                       L4T     EL2B                  Both     Yes No
SAS AA Cable 3m - HD 6Gb Adapt
                       L4T     EL2C                  Both     Yes No
SAS AA Cable 6m - HD 6Gb Adapt
                       L4T     EL2D                  Both     Yes No
SAS Ca(YI) System to SAS 3M
                       L4T     EL2L                  Both     Yes No
16GB (2x8GB) Memory DIMMs 1066
                       L4T     EL2S                  Both     Yes No
32GB (2x16GB) Mem DIMMs 1066
                       L4T     EL2T                  Both     Yes No
EXP30 Ultra SSD I/O Drawer
                       L4T     EL30                  Both     Yes No
PCIe x8 Cable 1.5m
                       L4T     EL31                  Both     Yes No
PCIe x8 Cable 3m
                       L4T     EL32                  Both     Yes No
387GB 1.8" SAS SSD (AIX/Linux)
                       L4T     EL34                  Both     Yes No
900GB 10k RPM SAS SFF Disk
                       L4T     EL35                  Both     Yes No
12X I/O Drawer PCIe, SFF disk
                       L4T     EL36                  Both     Yes No
12X I/O Drawer PCIe, No Disk
                       L4T     EL37                  Both     Yes No
4.0 GHz , 8-c P7+ Proc DCM
                       L4T     EL3H                  Initial  N/A No
3.5 GHz , 8-c P7+ Proc DCM
                       L4T     EL3J                  Initial  N/A No
NC 1-core activation of #EL3H
                       L4T     EL3K                  Initial  N/A No
NC 1-core activation of #EL3J
                       L4T     EL3L                  Initial  N/A No
1-core activation of #EL3H
                       L4T     EL3M                  Initial  N/A No
1-core activation of #EL3J
                       L4T     EL3N                  Initial  N/A No
Trial Live Partition Mobility
                       L4T     ELPM                  Both     Yes No
Quantity 150 of #EL1K
                       L4T     ELQK                  Support  Yes No
Quantity 150 of #EL1L
                       L4T     ELQL                  Both     Yes No
Quantity 150 of #EL1M
                       L4T     ELQM                  Both     Yes No
Quantity 150 of #EL1N
                       L4T     ELQN                  Both     Yes No
Quantity 150 of #EL1P
                       L4T     ELQP                  Both     Yes No
Quantity 150 of #EL1Q
                       L4T     ELQQ                  Both     Yes No
Quantity 150 of #EL1R
                       L4T     ELQR                  Both     Yes No
Memory Riser Card
                       L4T     EM01                  Both     Yes No
1m 10GbE Cable SFP+ Act Twinax
                       L4T     EN01                  Both     Yes No
3m 10GbE Cable SFP+ Act Twinax
                       L4T     EN02                  Both     Yes No
5m 10GbE Cable SFP+ Act Twinax
                       L4T     EN03                  Both     Yes No
PCIe x8 Cable 8m
                       L4T     EN08                  Both     Yes No
PCIe2 16Gb 2-port Fibre Channe
                       L4T     EN0A                  Both     Yes No
PICe2 4-port 10Gb FCoE & 1GbE
                       L4T     EN0H                  Both     Yes No
Integ Multifunc Card w/ 10GbE
                       L4T     EN10                  Both     Yes No
Integ Multifunc Card w/10GbEo
                       L4T     EN11                  Both     Yes No
Processor & Memory Backplane
                       L4T     EPT1                  Initial  N/A No
Service Processor
                       L4T     EPTR                  Initial  N/A No
Storage Backplane
                       L4T     EPTS                  Initial  N/A No
Quantity 150 of #3452 SAS Cabl
                       L4T     EQ02                  Both     Yes No
Quantity 150 of #3453 SAS YO
                       L4T     EQ03                  Both     Yes No
Power Cable Drawer to IBM PD
                       L4T     EQ77                  Both     Yes No
RFID Tags for Compute Nodes
                       L4T     ERF1                  Initial  N/A No
Front Door for P770/780 2MRack
                       L4T     ERG7                  MES      Yes No
387GB SFF-1 SSD for AIX/Linux
                       L4T     ES0A                  Both     Yes No
PCIe2 RAID SAS Adapter 6Gb
                       L4T     ESA1                  Both     Yes No
S&H - No Charge
                       L4T     ESC0                  Initial  N/A No
S&H
                       L4T     ESC7                  Initial  N/A No
Four ES0A 387GB SFF-1 SSD AIX
                       L4T     ESRA                  Initial  N/A No
1TB Removable Disk Cartridge
                       L4T     EU01                  Both     Yes No
RDX USB External Docking
                       L4T     EU04                  Both     Yes No
RDX 320 GB Removable Disk Driv
                       L4T     EU08                  Both     Yes No
1.5TB Removable Disk Cartridge
                       L4T     EU15                  Both     Yes No

The following are newly announced features on the specific models of the IBM Power Systems 7014, 7895, 8202, 8231, and 8268 machine type:

                                             Minimum Initial/
                                             Monthly MES/
Description          Model  Feature Purchase Maint.  Both/        RP
Machine type 7014    number number  price    Charge  Support  CSU MES

Rack Content Specify: 8248-L4T
                       B42     ER0H                  Initial  N/A No
                       T00                           Initial  N/A No
                       T42                           Initial  N/A No
                                             Minimum Initial/
                                             Monthly MES/
Description          Model  Feature Purchase Maint.  Both/        RP
Machine type 7895    number number  price    Charge  Support  CSU MES

PowerVM EE for Small Server
                       23X     EC21                  Both     Yes No
                                             Minimum Initial/
                                             Monthly MES/
Description          Model  Feature Purchase Maint.  Both/        RP
Machine type 8202    number number  price    Charge  Support  CSU MES

PowerVM EE for Small Server
                       E4D     EC21                  Both     Yes No
                                             Minimum Initial/
                                             Monthly MES/
Description          Model  Feature Purchase Maint.  Both/        RP
Machine type 8231    number number  price    Charge  Support  CSU MES

PowerVM EE for Small Server
                       E1D     EC21                  Both     Yes No
                       E2D                           Both     Yes No
                                             Minimum Initial/
                                             Monthly MES/
Description          Model  Feature Purchase Maint.  Both/        RP
Machine type 8268    number number  price    Charge  Support  CSU MES

PowerVM EE for Small Server
                       E1D     EC21                  Both     Yes No

Pricing terms

Prices in the following PDF prices link are suggested list prices on day of announcement for the U.S. only. They are provided for your information only. Dealer prices may vary, and prices may also vary by country. IBM list price does not include tax or shipping and is subject to change without notice.

ENUS-113-112-LIST_PRICES_2013_07_30.PDF ENUS-113-112-LIST_PRICES_2013_07_30.PDF

ServicePac® prices

For ServiceElect (ESA) maintenance service charges, contact IBM Global Services at 888-IBM-4343 (426-4343).

IBM Global Financing

IBM Global Financing offers competitive financing to credit-qualified customers to assist them in acquiring IT solutions. Offerings include financing for IT acquisition, including hardware, software, and services, from both IBM and other manufacturers or vendors. Offerings (for all customer segments: small, medium, and large enterprise), rates, terms, and availability can vary by country. Contact your local IBM Global Financing organization or visit

http://www.ibm.com/financing

IBM Global Financing offerings are provided through IBM Credit LLC in the United States, and other IBM subsidiaries and divisions worldwide to qualified commercial and government customers. Rates are based on a customer's credit rating, financing terms, offering type, equipment type, and options, and may vary by country. Other restrictions may apply. Rates and offerings are subject to change, extension, or withdrawal without notice.

Financing solutions from IBM Global Financing can help you stretch your budget and affordably acquire the new product. But beyond the initial acquisition, our end-to-end approach to IT management can also help keep your technologies current, reduce costs, minimize risk, and preserve your ability to make flexible equipment decisions throughout the entire technology lifecycle.



Back to topBack to top
 
Top rule
Order now
Bottom rule

To order, contact the Americas Call Centers or your local IBM representative, or your IBM Business Partner.

To identify your local IBM representative or IBM Business Partner, call 800-IBM-4YOU (426-4968).

Phone:      800-IBM-CALL (426-2255)
Fax:        800-2IBM-FAX (242-6329)
 For IBM representative: callserv@ca.ibm.com
 
 For IBM Business Partner: pwswna@us.ibm.com
 
Mail:       IBM Teleweb Customer Support
            ibm.com® Sales Execution Center, Americas North
            3500 Steeles Ave. East, Tower 3/4
            Markham, Ontario
            Canada
            L3R 2Z1

Reference: SE001

The Americas Call Centers, our national direct marketing organization, can add your name to the mailing list for catalogs of IBM products.


Note: Shipments will begin after the planned availability date.
Trademarks

IBM PowerLinux, EnergyScale, PowerVM, IBM Systems Director Active Energy Manager, Focal Point, Power Systems and Electronic Service Agent are trademarks of IBM Corporation in the United States, other countries, or both.

IBM, Micro-Partitioning, PowerHA, POWER7, POWER6, POWER, AIX, Power, PartnerWorld, ServiceSuite, ServicePac and ibm.com are registered trademarks of IBM Corporation in the United States, other countries, or both.

Linux is a registered trademark of Linus Torvalds in the United States, other countries, or both.

Other company, product, and service names may be trademarks or service marks of others.

Terms of use

IBM products and services which are announced and available in your country can be ordered under the applicable standard agreements, terms, conditions, and prices in effect at the time. IBM reserves the right to modify or withdraw this announcement at any time without notice. This announcement is provided for your information only. Additional terms of use are located at

http://www.ibm.com/legal/us/en/

For the most current information regarding IBM products, consult your IBM representative or reseller, or visit the IBM worldwide contacts page

http://www.ibm.com/planetwide/us/

Share this page

Digg Linked In

Contact IBM

Feedback

-->