InfoPrint 1872 (MT 4553) offers fast printing for heavy-volume jobs and unique application needsUnited States Hardware Announcement 108-845
October 21, 2008
|Table of contents||Document options|
InfoPrint® Solutions Company, a Ricoh-IBM joint venture, is enhancing its workgroup printer family with the introduction of the InfoPrint 1872 printer. This printer is the replacement for the InfoPrint 1572.
This new monochrome laser printer offers faster printing of up to 55 pages per minute (ppm)1 on letter media and up to 53 ppm1 on A4 media. Other benefits of the InfoPrint 1872 include:
- Faster processor than previous product
- New Quiet mode
- Larger capacity toner cartridges than previous product
- Hardware, software, and firmware improvements for better print quality and smoother images, including automatic darkness adjustment and a new gear train, resulting in a more uniform print
- Tilt operator panel for easier viewing and numeric keypad for device configuration and confidential print jobs
- Finishing options, including multi-bin mailbox, large output stacker, and StapleSmart finisher
- Exact print speeds vary depending on document complexity, system configuration, software applications, driver, and printer status.
There is no feature exchange with these products.
Back to top
|Planned availability date|
November 14, 2008: InfoPrint 1872 printer and featuresNovember 14, 2008: InfoPrint 1872 printer and features
February 20, 2009: IPDS and SCS/Tne Card, RS-232C Serial Interface Card, 2,000-Sheet Drawer, and 5 in. Spacer features
Back to top
InfoPrint 1872 is the replacement for the InfoPrint 1572 workgroup printer. This new monochrome laser printer offers faster printing of up to 55 ppm on letter size media and up to 53 ppm on A4 size media. The time to first print is as fast as 8.5 seconds. The printer comes in the following models:
Standard Maximum Standard Model memory memory USB Processor Duplex 10/100BaseTX n01 256 MB 1280 MB Standard 600 MHz No Yes dn1 256 MB 1280 MB Standard 600 MHz Standard Yes
All models include one 550-sheet drawer and a 100-sheet multipurpose feeder (MPF) for a total input capacity of 650 sheets standard. Up to four optional input drawers are supported for a maximum input capacity of 4,300 sheets. Standard output capacity is 550 sheets with a maximum output capacity of 2,950 sheets.
All models have one slot for additional SDRAM memory. Memory options for the printer include 256 MB, 512 MB, or 1024 MB memory DIMMs. All models have one slot for the optional 256 MB flash memory card and one slot for an optional hard disk.
All models include internal Ethernet 10/100BaseTX as standard.
The internal wireless feature allows the printer to be connected directly to a wireless LAN. This supports the IEEE 802.11b, 802.11g, and 802.11n draft 2.0 standards. Draft 2.0 refers to the version of the not-yet-ratified IEEE 802.11n standard.
The maximum monthly usage for the InfoPrint 1872 is 275,000 impressions. InfoPrint Solutions Company does not recommend printing to the monthly maximum on a consistent basis.
The print resolutions supported by the printer are:
- 1200 x 1200 dpi
- 2400 Image Quality
- 1200 Image Quality
- 600 x 600 dpi
The Toner Darkness setting offers 10 user-selectable settings to balance print darkness and toner savings. The higher the setting, the darker the print (that is, level 1 is the lightest). The printers ship with a default setting of 8. From level 8 to level 1 offers up to 50% toner savings, thus reducing the cost of printing. The Toner Darkness setting is available through the operator panel under the Quality menu and also accessible from the print driver.
The Automatic Darkness Adjustment system is designed to adjusted toner density in order to achieve a common print darkness across environments, through cartridge and printer life, and between cartridges. This is achieved by measuring real-time print darkness at predetermined intervals throughout cartridge life. Automatic Darkness Adjustment will allow for greater reliability in print quality and uniformity across all cartridges and printers. All this is achieved with no impact to printer performance.
The InfoPrint 1872 printer resident fonts include support for the following:
Emulation Number of scalable fonts Number of bitmapped fonts PCL 6 89 2 PostScript 158 0 PPDS 39 5
The fonts in the PCL emulation are compatible with the fonts in the HP LaserJet 4550 and includes nine additional fonts and many extra symbol sets to support extra languages and applications. Included in the PCL emulation are OCR-A, OCR-B, and Code 3 of 9 barcode fonts. The fonts in the PostScript® emulation are compatible with all 136 fonts in Adobe® PostScript 3 and include 22 additional fonts.
Additional fonts can be downloaded to the printer RAM, optional user flash, or the hard disk.
Included on the CD-ROM shipped with the printer are screen fonts to match the printer's resident scalable fonts. The Software and Documentation CD also include a variety of downloadable fonts for Hebrew and Arabic.
The printer supports the following features:
Part number Description 39V2953 250-Sheet Drawer 39V2954 550-Sheet Drawer 39V2955 250-Sheet Tray 39V2956 550-Sheet Tray 39V2957 2,000-Sheet Drawer 39V2959 200-Sheet Universally Adj Drawer 39V2960 200-Sheet Universally Adj Tray 39V2961 400-Sheet Universally Adj Drawer 39V2962 400-Sheet Universally Adj Tray 39V2965 Envelope Feeder 39V3533 StapleSmart Finisher 39V3534 Output Expander 39V3535 5-Bin Mailbox 39V3536 High Capacity Output Stacker 39V2690 IPDS & SCS/Tne Card 39V3609 Bar Code Card 39V3463 Decryption Card 39V3415 256 MB Memory 39V3416 512 MB Memory 39V3417 1024 MB Memory 39V3593 256 MB Flash Memory 39V3420 80 GB Hard Disk 39V3608 Ethernet 1000BaseTX 39V1524 Ethernet 10/100BaseTX (1 USB port) 39V1525 Ethernet 1000BaseTX (4 USB ports) 75P6854 802.11g Wireless to USB 39V3623 802.11b/g/n Wireless Print Server 39V3423 Parallel 1284-B Interface Card 39V3424 RS-232C Serial Interface Card 75P7029 10 ft. Parallel Cable 75P7030 2-meter USB Cable 39V3618 Korean Font Card 39V3619 Simplified Chinese Font Card 39V3620 Traditional Chinese Font Card 39V3621 Japanese Chinese Font Card 39V3615 5 in. Spacer 39V3588 Caster Base
Accessibility by people with disabilities
For hardware offerings:
The following features support use by people with disabilities:
- Controls and latches are operable with one hand and minimal dexterity.
- Keys are discernible by touch without activating them.
- The display, controls, latches, and levers are accessible to someone in a wheel chair.
- Color is used as an enhancement for conveying information, as well as an additional method of distinguishing between buttons, controls, and latches.
Back to top
Mach Feature Part type Model number number Description UPC 4553 n01 39V2850 InfoPrint 1872 8-83436-03514-9 4553 dn1 39V2851 InfoPrint 1872 8-83436-03515-6 39V3415 256 MB Memory 8-83436-04120-1 39V3416 512 MB Memory 8-83436-04121-8 39V3417 1024 MB Memory 8-83436-04122-5 39V2690 IPDS & SCS/Tne Card 8-83436-04556-8 39V3609 Bar Code Card 8-83436-04682-4 ServicePacs Machine Electronic type Model Description part number 4553 All SVCPAC PTR 2YR EZS/NBD 54Y4934 4553 All SVCPAC PTR 3YR EZS/NBD 54Y4935 4553 All SVCPAC PTR 1YR IOR 9X5/NBD 54Y4936 4553 All SVCPAC PTR 2YR IOR 9X5/NBD 54Y4937 4553 All SVCPAC PTR 3YR IOR 9X5/NBD 54Y4938 4553 All SVCPAC PTR 1YR IOR 24X7/SD 54Y4939 4553 All SVCPAC PTR 2YR IOR 24X7/SD 54Y4940 4553 All SVCPAC PTR 3YR IOR 24X7/SD 54Y4941 4553 All SVCPAC PTR 1YR IOR EZS/NBD (MA) 54Y4942 4553 All SVCPAC PTR 2YR IOR EZS/NBD (MA) 54Y4943 4553 All SVCPAC PTR 1YR IOR 9X5/NBD (MA) 54Y4944 4553 All SVCPAC PTR 2YR IOR 9X5/NBD (MA) 54Y4945 4553 All SVCPAC PTR 1YR IOR 24X7/SD (MA) 54Y4946 4553 All SVCPAC PTR 2YR IOR 24X7/SD (MA) 54Y4947
Business Partner information
If you are a Direct Reseller - System Reseller acquiring products from IBM, you may link directly to Business Partner information for this announcement. A PartnerWorld ID and password are required (use IBM ID).
Back to top
All hardcopy publications are downloadable from the InfoPrint Solutions Company Web site
The following publications are shipped with the products:
Software and Documentation CD
User's Guide (contained on CD)
The User's Guide will be available in the following languages: Arabic, English, Danish, Dutch, Finnish, French, German, Hebrew, Italian, Korean, Norwegian, Polish, Brazilian Portuguese, Romanian, Russian, Spanish, Swedish, Simplified Chinese, Traditional Chinese, and Turkish.
Back to top
Specified operating environment
Width Depth Height Weight n01 425.0 mm 510.2 mm 437.6 mm 23.4 kg model (16.7 in) (20.1 in) (17.2 in) (51.6 lb) 550-Sheet 421.0 mm 510.2 mm 130.4 mm 4.0 kg Drawer (16.6 in) (20.1 in) (5.1 in) (9.0 lb) 250-Sheet 421.0 mm 510.2 mm 90.0 mm 3.2 kg Drawer (16.6 in) (20.1 in) (3.5 in) (7.0 lb) 2,000-Sheet 421.0 mm 510.2 mm 357.0 mm 16.8 kg Drawer (16.6 in) (20.1 in) (14.1 in) (37.0 lb) Output 421.0 mm 378.0 mm 160.0 mm 2.6 kg Expander (16.6 in) (14.9 in) (6.2 in) (5.7 lb) 5-Bin 421.0 mm 330.0 mm 315.0 mm 5.2 kg Mailbox (16.6 in) (12.9 in) (12.4 in) (11.5 lb) High-Cap. 421.0 mm 378.0 mm 323.0 mm 4.5 kg Output (16.6 in) (14.9 in) (12.7 in) (9.9 lb) Stacker Staple- 433.5 mm 403.2 mm 320.4 mm 7.2 kg Smart (17.1 in) (15.9 in) (12.6 in) (15.8 lb) Envelope (2) 233.0 mm (2) 2.0 kg Feeder (9.2 in) (4.4 lb) (closed position) Envelope (2) 350.0 mm (2) 2.0 kg Feeder (13.8 in) (4.4 lb) (support fully extended) 5 in. 421.0 mm 510.2 mm 130.4 mm 3.4 kg Spacer (16.6 in) (20.1 in) (5.1 in) (7.5 lb) Caster 768.0 mm 801.0 mm 107.0 mm 38.5 kg Base (30.3 in) (31.6 in) (4.2 in) (85 lb)
- Envelope feeder fits within height and width of printer.
Minimum clearance requirements
Left side Right side Front Rear Top 304.8 mm 304.8 mm 508.0 mm 304.8 mm 114.3 mm (12 in) (12.0 in) (20 in) (12.0 in) (4.5 in)
Note: When installing the printer, the customer should allow enough room to access the paper trays and paper exits.
Operating environment Temperature 15.6 to 32.2 C (60 to 90 F) Humidity 8% to 80% relative humidity Altitude 0 to 3,048 meters (10,000 ft) Storage and shipping environment (packed) Temperature -40 to 43.3 C (-40 to 110 F) Humidity 5% to 95% relative humidity Altitude 0.25 atmospheric pressure (equivalent to 10,300 m; 34,000 ft) Storage and shipping environment (Unpacked) Temperature 0 to 40 C (32 to 104 F) Humidity 5% to 80% relative humidity
- 100 - 127 V ac at 47 to 63 Hz, nominal
- 90 - 137 V ac, extreme
Average power consumption
The following table specifies nominal average power requirements for the base printer configuration for InfoPrint 1872.
Printing states Model n01 Off 0 W Power Saver Mode 14 W Ready Mode 85 W Continuous Printing 1-sided 740 W 2-sided 575 W Maximum current while printing 110-127 Volts 7.6 a 220-240 Volts 4.1 a Printer Fuser Lamp 925 W
Note: All duplex models are ENERGY STAR compliant.
All measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.
1 meter average Declared sound pressure sound power Mode level level Idle (standby mode) 30 dBA 4.3 Bels Simplex printing 55 dBA 6.9 Bels Duplex printing 56 dBA N/M N/M Not measured Measurements apply to 300 dpi, 600 dpi, and 1200 printing.
InfoPrint Solutions Company has implemented features on the InfoPrint 1872 that allow the customer to easily select various operating modes in order to reach their sustainability goals related to environmental and noise pollution. These new features are Eco mode and Quiet mode.
Eco mode optimizes printer settings to minimize the environmental impact while Quiet mode significantly reduces noise.
Quiet mode setting
- This configuration represents a restoration of the factory default state of the various settings that will be changed by the other settings below. This mode will support performance claims for the product.
- Printer will be configured to run in a reduced noise mode. Primarily,
the user is trading performance for quieter operation. The following settings
areas are affected:
- Process speed is reduced.
- Beeps are disabled or minimized (key press, alarms, and so on).
- Upon receiving a print job, engine motors are not ramped up prior to the job being ready to actually print.
- Fans run in reduced speed or turned off.
These printers are designed as Customer Setup Unit (CSU). The customer is responsible for:
- Adequate site, system, and other vendor preparation
- Receipt at the customer location and placement of the printer
- Installation and configuration of the printer and features by following
the installation instructions, including:
- Installing and maintaining cables
- Loading print media and clearing jams
- Performing low-level problem determination
- Ordering and installing supplies and consumables
- Working with InfoPrint Solutions Technical Support to complete
low-level problem determination, including:
- Downloading and installing microcode updates as directed by the InfoPrint Solutions Technical Support Center
- Replacing defective features that were installed as part of the customer setup process
It is the customer's responsibility to order and maintain an adequate inventory of toner cartridges and maintenance supplies.
No attachment cables are required for this feature.
No supplies are required with the machine order. InfoPrint 1872 is shipped with 10,000-impressions3 print cartridge. See the following table for replacement print cartridges. It is the customer's responsibility to order and maintain an adequate inventory of toner cartridges and maintenance supplies.
The following replacement supplies are available for InfoPrint 1872:
Part Description Model number Apx. avg. yield(3) Use and return program toner cartridge All 39V2511 7,000 impressions Use and return program high yield toner All 39V2513 25,000 impressions cartridge High yield toner cartridge All 39V2514 25,000 impressions Use and return program extra high yield All 39V2515 36,000 impressions toner cartridge Staple pack All 75P6997 15,000 staples
- Approximate yield has been established with an average coverage of 5%. An "impression" is defined as one printed side of a sheet. A duplex sheet would consist of two impressions.
The approximate average yields are not a warranty or guarantee of minimum life, and are provided to assist in initial supplies planning. Actual usage should be used to establish the supply's life in the end user's application. Many factors (for example, print coverage per page, machine settings, paper type and size, and environmental conditions) can affect supply life.
The following maintenance supplies are available for InfoPrint 1872:
Description Models Part number Approximate average yield 110V Maintenance Kit(4) All 39V3590 300,000 pages Pick Roll Assembly All 39V3598 300,000 pages Charge Roll Assembly All 39V3599 300,000 pages 110V Fuser Assembly All 39V3600 300,000 pages 110V Detack Fuser Assembly All 39V3602 150,000 pages Transfer Roll Assembly All 39V3604 300,000 pages
- Maintenance Kit contains fuser, transfer roll, charge roll, and three sets pick rolls (two per set) for a total of six pick rolls.
All maintenance supplies are customer installable. Installation services are available at InfoPrint Solutions Company's current billable service rate for this product, with a one-hour minimum. The maintenance kits must be purchased separately by the customer before contacting InfoPrint Solutions Company for installation.
Supply warranties are only for defects in materials and workmanship at the time of shipment and installation. They are not for print count life or normal wear and tear, nor for any print count minimum. Contact your place of purchase for warranty return instructions.
InfoPrint Solutions Company is committed to environmentally conscious programs for printer supplies. A collection program for used printer cartridges has been established and return instructions are included in the supply item packaging, with free return shipping.
Maintenance supplies distributors
InfoPrint Solutions Company printing supplies are distributed by Priority Fulfillment Services (PFS) and a worldwide network of resellers. End users can contact PFS at 888-IBM-PRINT (426-7746) for the name of an InfoPrint Solutions Company reseller in their area where printing supplies can be purchased.
Resellers can mail orders for InfoPrint Solutions Company printing supplies to PFS at the following address:
Priority Fulfillment Services 500 North Central Expressway Plano, TX 75074 Telephone: 888-IBM-PRINT (426-7746) Fax: 972-881-9201 To contact PFS, call (United States) 972-881-0733 ext. 3234.
The pallet quantity for InfoPrint 1872 Model n01 is eight printers per pallet and for Model dn1 is eight printers per pallet.
Security, auditability, and control
This product uses the security and auditability features of the host hardware, host software, and application software.
The customer is responsible for evaluation, selection, and implementation of security features, administrative procedures, and appropriate controls in application systems and communications facilities.
Back to top
|Terms and conditions|
IBM Global Financing
If required, InfoPrint Solutions Company provides repair or exchange service depending on the types of warranty service specified for the machine. InfoPrint Solutions Company will attempt to resolve your problem over the telephone, or electronically via an InfoPrint Solutions Company Web site. You must follow the problem determination and resolution procedures that InfoPrint Solutions Company specifies. Scheduling of service will depend upon the time of your call and is subject to parts availability. If applicable to your product, parts considered Customer Replaceable Units (CRUs) will be provided as part of the machine's standard warranty service.
Service levels are response time objectives and are not guaranteed. The specified level of warranty service may not be available in all worldwide locations. Additional charges may apply outside InfoPrint Solutions Company's normal service area. Contact your local InfoPrint Solutions Company representative or your reseller for country- and location-specific information. This product is covered by the following types of service.
Customer Replaceable Unit Service and On-site for other selected parts.
CRU: InfoPrint Solutions Company provides replacement CRUs to you for you to install. CRU information and replacement instructions are shipped with your machine and are available from InfoPrint Solutions Company upon your request. CRUs are designated as being either a Tier 1 or a Tier 2 CRU.
Tier 1 CRU: Installation of Tier 1 CRUs is your responsibility. If InfoPrint Solutions Company installs a Tier 1 CRU at your request, you will be charged for the installation.
Tier 2 CRU: You may install a Tier 2 CRU yourself or request InfoPrint Solutions Company to install it, at no additional charge.
Based upon availability, CRUs will be shipped for next-business-day delivery. InfoPrint Solutions Company specifies, in the materials shipped with a replacement CRU, whether a defective CRU must be returned to InfoPrint Solutions Company. When return is required, 1) return instructions and a container are shipped with the replacement CRU and 2) you may be charged for the replacement CRU if InfoPrint Solutions Company does not receive the defective CRU within 15 days of your receipt of the replacement.
The following parts have been designated as Tier 1 CRU parts:
- All Output Devices
- Memory Cards
- Optional Firmware Cards
- Option Cards
- Wireless Adapters
- All External Adapters
- Op Panel Overlay
- Data cables and adapters (including USB, Serial, Parallel, Telephone Fax Line, Scanner)
- All Power Cords
- Hard Drives
- All Input Devices
- Machine Covers
- Furniture and furniture parts (including stands, cabinet and shelves)5
- Stacker Arm
- Scanner Op Panel
- Scanner Op Panel Cover
- Scanner Power Supply
- Scanner Control Unit
- All furniture products will have a one-year (12 months) warranty with delivery of this warranty through replacement CRUs shipped direct to the customer for customer installation. After the one-year warranty, repair/replacement of the furniture is a customer responsibility.
Standard tier 1 CRU items listed would not apply if the specific product does not include that function or feature.
On-site Service: InfoPrint Solutions Company will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the machine. The area must be clean, well-lit, and suitable for the purpose.
- 9 hours per day, Monday through Friday, excluding holidays, next-business-day response
Warranty and maintenance
- Base printer - 12 months
- Optional features - 12 months
Hourly Service Class:
- Technical support during warranty period
- Advance Exchange
Warranty service upgrades
- InfoPrint Solutions Company On-site Repair (IOR) 9 x 5, Monday through Friday, excluding holidays, next-business-day response
- IOR 24 x 7, same-day response
- Advance Exchange
- IOR 9 x 5, Monday through Friday, excluding holidays, next-business-day response
- IOR 24 x 7, same-day response
ServicePacs for warranty and maintenance options
Refer to the Prices section for ServicePac® offerings.
Usage plan machine
Hourly service rate classification
When a type of service involves the exchange of a machine part, the replacement may not be new, but will be in good working order.
Customer setup. Customers are responsible for installation according to the instructions InfoPrint Solutions Company provides with the machine.
Graduated program license charges apply
Licensed internal code and licensed machine code
This product does not contain Licensed Internal Code or Licensed Machine Code.
Educational allowance does not apply.
Back to top
All features are both plant and field installable. All features apply to all models listed below.
Mach Feature Part type Model number number Description 4553 n01 39V2850 InfoPrint 1872 4553 dn1 39V2851 InfoPrint 1872 4505 39V2953 250-Sheet Drawer 4506 39V2954 550-Sheet Drawer 4501 39V2955 250-Sheet Tray 4502 39V2956 550-Sheet Tray 4520 39V2957 2,000-Sheet Drawer 4507 39V2959 200-Sheet Universally Adj Drawer 4503 39V2960 200-Sheet Universally Adj Tray 4508 39V2961 400-Sheet Universally Adj Drawer 4504 39V2962 400-Sheet Universally Adj Tray 4511 39V2965 Envelope Feeder 4621 39V3533 StapleSmart Finisher 4620 39V3534 Output Expander 4640 39V3535 5-Bin Mailbox 4630 39V3536 High Capacity Output Stacker 4821 39V2690 IPDS & SCS/Tne Card 4870 39V3609 Bar Code Card 4823 39V3463 Decryption Card 4393 39V3415 256 MB Memory 4394 39V3416 512 MB Memory 4395 39V3417 1024 MB Memory 4042 39V3593 256 MB Flash Memory 4329 39V3420 80 GB Hard Disk 4166 39V3608 Ethernet 1000BaseTX 4163 39V1524 Ethernet 10/100BaseTX (1 USB port) 4164 39V1525 Ethernet 1000BaseTX (4 USB ports) 4190 75P6854 802.11g Wireless to USB 4170 39V3623 802.11b/g/n Wireless Print Server 4139 39V3423 Parallel 1284-B Interface Card 4138 39V3424 RS-232C Serial Interface Card 4180 75P7029 10 ft. Parallel Cable 4184 75P7030 2-meter USB Cable 4813 39V3618 Korean Font Card 4811 39V3619 Simplified Chinese Font Card 4812 39V3620 Traditional Chinese Font Card 4810 39V3621 Japanese Chinese Font Card 4532 39V3615 5 in. Spacer 4533 39V3588 Caster Base ServicePacs Machine Electronic type Model Description part number 4553 All SVCPAC PTR 2YR EZS/NBD 54Y4934 4553 All SVCPAC PTR 3YR EZS/NBD 54Y4935 4553 All SVCPAC PTR 1YR IOR 9X5/NBD 54Y4936 4553 All SVCPAC PTR 2YR IOR 9X5/NBD 54Y4937 4553 All SVCPAC PTR 3YR IOR 9X5/NBD 54Y4938 4553 All SVCPAC PTR 1YR IOR 24X7/SD 54Y4939 4553 All SVCPAC PTR 2YR IOR 24X7/SD 54Y4940 4553 All SVCPAC PTR 3YR IOR 24X7/SD 54Y4941 4553 All SVCPAC PTR 1YR IOR EZS/NBD (MA) 54Y4942 4553 All SVCPAC PTR 2YR IOR EZS/NBD (MA) 54Y4943 4553 All SVCPAC PTR 1YR IOR 9X5/NBD (MA) 54Y4944 4553 All SVCPAC PTR 2YR IOR 9X5/NBD (MA) 54Y4945 4553 All SVCPAC PTR 1YR IOR 24X7/SD (MA) 54Y4946 4553 All SVCPAC PTR 2YR IOR 24X7/SD (MA) 54Y4947 Maintenance charges ESA Packages Charges Machine Type Description 4553 3 YR IOR 9 X 5/ND 4553 3 YR IOR 24 X 7/SD Low End Alt. Service Charges Machine From To Description type Service Service InfoPrint 1872 4553 Depot IOR 9 X 5 InfoPrint 1872 4553 IOR 9 X 5 IOR 24 X 7 Annual ESA Maintenance Charges Machine Service Description type Offering InfoPrint 1872 4553 Depot InfoPrint 1872 4553 IOR 9 X 5 InfoPrint 1872 4553 IOR 24 X 7 Low End Annual Minimum Maintenance Charges Machine Service Description type Offering InfoPrint 1872 4553 Depot InfoPrint 1872 4553 IOR 9 X 5 InfoPrint 1872 4553 IOR 24 X 7
Back to top
For ordering, contact your InfoPrint Solutions Company representative, an InfoPrint Solutions Company Business Partner, or IBM® Americas Call Centers at 800-IBM-CALL (Reference: YE001).
IPDS is a trademark of Ricoh Co., Ltd. in the United States, other countries, or both.
InfoPrint is a registered trademark of Ricoh Co., Ltd. in the United States, other countries, or both.
Ricoh is a registered trademark of Ricoh Co., Ltd. and its affiliated companies.
PostScript and Adobe are registered trademarks of Adobe Systems Incorporated in the United States, and/or other countries.
ServicePac and IBM are registered trademarks of IBM Corporation in the United States, other countries, or both.
Other company, product, and service names may be trademarks or service marks of others.
For the most current information regarding IBM products, consult your IBM representative or reseller, or visit the IBM worldwide contacts page
Back to top