IBM Power 750 Express model E8D delivers unprecedented performance, scalability, reliability, and manageability for demanding commercial workloadsIBM United States Hardware Announcement 113-026February 5, 2013 (Corrected on April 18, 2013) In the Terms and conditions section moved the 24x7 coverage text from CRU and on-site service to the Warranty period section. Deleted replacement parts that were added in error.(Corrected on May 13, 2013) In Terms and conditions section corrected information about warranty service upgrades.
The Power® 750 Express® server is a powerful 1- to 4-socket server that supports up to 32 cores with the configuration flexibility to meet today's growth and tomorrow's processing needs. The server features:
For ordering, contact your IBM® representative, an IBM Business Partner, or IBM Americas Call Centers at 800-IBM-CALL (Reference: YE001).  Back to top
The Power 750 Express server (8408-E8D) supports up to four POWER7+ processor dual chip modules (DCMs). Each of the four processor DCMs is an 8-core DCM packaged with 2 x 4-core chips. All 8-core processor DCMs are either 3.5 or 4.0 GHz mounted on a dedicated card with a granularity of one DCM in a 19-inch rack-mount, 5U (EIA units) drawer configuration. Each POWER7+ processor DCM is a 64-bit, 8-core processor packaged on a dedicated card with a maximum of 64 DDR3 DIMMs, 10 MB of L3 cache per core, and 256 KB of L2 cache per core. A Power 750 Express server can be populated with one, two, three, or four DCMs providing 8, 16, 24, or 32 cores. All the cores are active. The Power 750 Express server supports a maximum of 64 DDR3 DIMM slots, 16 per 8-core processor DCM. Memory features (two DIMMs per memory feature) supported are 8, 16, and 32 GB and run at speeds of 1066 MHz. A system with four DCMs installed has a maximum memory of 1024 GB. Also, the optional Active Memory Expansion can enable the effective maximum memory capacity to be much larger than the true physical memory. Innovative compression/decompression of memory content using a new hardware accelerator can allow memory expansion up to 125% for AIX® partitions. A server with a maximum of 1024 GB can effectively be expanded in excess of 2 TB. This can enhance virtualization and server consolidation by allowing more partitions or running more work with the same physical amount of memory. The Power 750 Express server delivers great I/O expandability. In addition to the six PCIe Gen2 slots in the system unit, up to four 12X-attached I/O drawers (#5802 or #5877), add up to 40 PCIe Gen1 slots. This set of PCI slots can provide extensive connectivity to LANs, switches, SANs, asynchronous devices, SAS storage, tape storage, and more. For example, more than 64 TB of SAS disk storage is supported. The Power 750 Express system unit includes six SFF SAS bays. This offers up to 5.4 TB HDD capacity or up to 3.6 TB SSD capacity. All SAS disks and SSDs are 2.5-inch SFF and hot swappable. The six SAS SFF bays can be split into two sets of three bays for additional configuration flexibility using just the integrated SAS adapters. Two new SSD packages offer ordering convenience and price savings for a new server order. Each 6-pack SSD feature #ESR2/#ESR4 for the EXP30 Ultra SSD I/O Drawer can provide up to 140,000 I/O operations per second (IOPS) in just 1/5th of a 1U drawer. The 4-pack SSD features #ESRA/ESRB/ESRC/ESRD can provide up to 90,000 IOPS. 6-pack or 4-pack SSD must be ordered with the server, not as a later MES order. Other integrated features include:
Back to top
One of the following operating systems:
For more information refer to the Hardware requirements and Software requirements sections. Back to top
Back to top
Summary of featuresThe following features are available on the Power 750 Express :
Processors
Memory Summary configuration considerations:
The minimum defined configuration in eConfig, if no choice is made, when AIX or Linux is the primary operating system is:
Feature number Description
EPT8 8-core 3.5 GHz POWER7+ Processor
EPT1 Processor & Memory Backplane
EPTR Service Processor
8 x EPTF 8 Processor Activations
2 x EM4B 32 GB Memory
2 x EM01 Memory Riser Card
EPTS Storage Backplane
1768 Integrated Multifunction Card
1886 146.8 GB 15k SFF DASD
2 x 5532 Two 1,925 watt ac power supplies, base
5771 SATA DVD-RAM
9300/97xx) Language Group Specify
2146 or 2147 Primary Operating System Indicator - IBM AIX (#2146)
or Linux (#2147)
2 x 6xxx Two Power Cords
Note: No internal DASD is required if feature 0837 (Boot from SAN) is selected. A Fibre Channel adapter or Fibre Channel over Ethernet must be ordered if feature 0837 is selected. The minimum defined configuration in eConfig, if no choice is made, when IBM i is the primary operating system is:
Feature number Description
EPT8 8-core 3.5 GHz POWER7+ Processor
EPT1 Processor & Memory Backplane
EPTR Service Processor
8 x EPTF 8 Processor Activations
2 x EM4B 32 GB Memory
2 x EM01 Memory Riser Card
EPTS Storage Backplane
1768 Integrated Multifunction Card is optional
(VIOS support only)
2 x 1888 139.5 GB 15k SFF DASD
(Not required if SAN is chosen)
2 x 5532 Two 1,925 watt ac power supplies, base
5771 SATA DVD-RAM
9300/97xx) Language Group Specify
2145 Primary Operating System Indicator - IBM i
0040 Mirrored System Disk Level Specify Code
0567 IBM i 7.1, or later
0837 SAN Load Source Specify (Boot from SAN)
(If SAN is chosen, does not require two disk drives)
5553 System Console - Internal LAN
2 x 6xxx Two Power Cords
Note: The Ethernet ports and serial port of the Integrated Multifunction Card is not natively supported by IBM i and thus cannot be used f for IBM i LAN console support. The 4-port Ethernet adapter (#5899) is usually used with this function or an optional HMC can be used for IBM i console functions. Note: No internal DASD is required if feature 0837 (Boot from SAN) is selected. A Fibre Channel or Fibre Channel over Ethernet adapter must be ordered if feature 0837 is selected. I/O drawer availability
Order Maximum
Feature description Status Interface number
5802 PCIe 12X I/O W/Disks Drawer Available 12X 4
(disk bays)
5877 PCIe 12X I/O No Disk Drawer Available 12X 4
(no disk bays)
5887 EXP24S SFF Gen2-bay Drawer Available SAS 51
EDR1 EXP30 Ultra SSD I/O Drawer Available PCIe 2
5886 EXP12S SAS Disk Drawer Supported SAS 27
Note: Two or more processor DCMs are required in order to attach a #5802, #5877, or #EDR1. Additional I/O drawer information
12X I/O drawer cables
EXP30 Ultra SSD I/O Drawer (#EDR1) is a 1U high I/O drawer that provides 30 hot-swap SSD bays and a pair of integrated large write cache, high-performance SAS controllers. Ultrahigh levels of performance are offered without using any PCIe slots on the POWER7 server in an ultradense packaging design. The two high-performance, integrated SAS controllers each physically provide 3.1 GB write cache. Working as a pair, they offer mirrored write cache data and controller redundancy. The cache contents are designed to be protected by built-in flash memory in case of power failure. If the pairing is broken, write cache is not used after existing cache content is written out to the drive and performance will probably be slowed until the controller pairing is reestablished. Each controller is connected to a GX++ PCIe adapter in a server (for example, #1914) over a PCIe x8 cable such as #EN05, #EN07, or #EN08. Usually both controllers are attached to one server, but each controller can be assigned to a different server or partition or VIOS. Active/Active capability is supported assuming at least two RAID arrays. The controllers deliver RAID 0, RAID 5, RAID 6, and RAID 10 for AIX , Linux , and VIOS. The controllers provide RAID 5 and RAID 6 for IBM i. AIX , IBM i, Linux , and VIOS also offer OS mirroring (LVM). The SAS controllers' CCIN is 57C3. eMLC SSDs designed to fit in the Ultra drawer bays, such as the 387 GB SSD (#ES02 or #ES04), are used. A minimum of six SSDs are required in each Ultra drawer. Each controller can access all 30 SSD bays. The EXP12S SAS Drawer (#5886) is a 2 EIA tall drawer and mounts in a 19-inch rack. The drawer can hold either SAS disk drives or SSDs. The drawer is 511.05 mm (20.12 in) long and can weigh up to 18.14 kg (40 lb) without SAS drives. The EXP12S SAS drawer has twelve 3.5-inch SAS bays with redundant data paths to each bay. The drawer supports redundant hot-plug power and cooling and redundant hot-swap SAS expanders (Enclosure Services Manager, or ESM). Each ESM has an independent SCSI Enclosure Services (SES) diagnostic processor. The SAS disk drives or SSDs contained in the EXP12S are controlled by one or two PCIe SAS adapters connected to the EXP12S via SAS cables. The SAS cable will vary depending on the adapter being used, the operating system being used, and the protection that you need. A second EXP12S drawer can be attached to another drawer using two SAS EE cables, providing 24 SAS bays instead of 12 bays for the same SAS controller port. This is called cascading . In this configuration, all 24 SAS bays are controlled by a single controller or a single pair of controllers. The feature 5886 can also be directly attached to the SAS port on the rear of the Power 750 Express , giving you a very low-cost disk storage solution. When used this way, the embedded SAS RAID controllers augmented by the 175 MB Cache RAID - Dual IOA Enablement Card (#5662) in the system unit control the disk drives in EXP12S. A second unit cannot be cascaded to a feature 5886 attached in this way. 19-inch racks The 8408-E8D and its I/O drawers are designed to mount in the 7014-T00, 7014-T42, 7014-B42, feature 0551, and feature 0553 racks. These are built to the 19-inch EIA standard. When ordering a new 8408 system, you can order the appropriate 7014 rack model with the system hardware on the same initial order. IBM also makes the racks available as features of the 8408-E8D when you order additional I/O drawer hardware for an existing system (MES order). The rack features 0551 and 0553 should be used if you want IBM to integrate the newly ordered I/O drawer in a 19-inch rack before shipping the MES order. The 8408-E8D has the following rack requirements:
Integrated I/O
I/O slots and adapters
Power Two ac power supplies are required for each CEC system unit; the second power supply provides redundant power for enhanced system availability. A CEC system unit is designed to function with one working power supply. A failed power supply can be hot swapped but must remain in the system until the replacement power supply is available for exchange. Power distribution units For systems installed in IBM 7014 or feature 055x racks, the following power distribution unit (PDU) rules apply (not all PDUs are available in all models of the 7014 or #055x):
To better enable electrical redundancy, each server drawer has two power supplies that must be connected to separate PDUs. Hot-plug options
Logical partitioning
Available backplane configurationsThe 750 CEC drawer has an extremely flexible and powerful backplane for supporting disk or SSDs. The six SFF bays can be configured in three different ways to match your business needs. Two built-in SAS controllers can be optionally augmented with a 175 MB Cache RAID Battery Card. Two embedded SAS disk/SSD controllers are provided for redundancy or for additional flexibility. The optional 175 MB Cache RAID - Dual IOA Enablement Card feature (#5662) enables dual 175 MB write cache and includes dual batteries for protection of that write cache. The backplane can be configured as one set of six bays, two sets of three bays (3/3), or three sets of two bays (2/2/2). Configuration options will vary depending upon the controller options and the operating system selected. The controllers for the six-bay or 3/3 configurations are always the two pairs of embedded controllers. If the 2/2/2 configuration is used, the two embedded controllers run the first two sets of bays (2/2) and a feature 5901 PCIe SAS adapter located in a PCIe slot in a CEC system unit controls the third set (2). By having three controllers, you can have three boot drives supporting three partitions. The following SSD/HDD configuration rules apply:
You can configure the two embedded controllers together as a pair for higher redundancy or you can configure them separately. If you configure them separately, they can be owned by different partitions or they could be treated independently within the same partition. If configured as a pair, they provide controller redundancy and can automatically switch over to the other controller if there are problems with one of the controllers. Also, if configured as a pair, both can be active at the same time (active/active) assuming there are two or more arrays configured, providing additional performance capability as well as redundancy. If configured as a pair, the pair controls all six SFF bays and all six drives. The 3/3 or 2/2/2 configurations are not used with the paired controllers. RAID 0 and RAID 10 are supported, and you can also mirror two sets of controller/drives using the operating system. Adding the optional 175 MB Cache RAID - Dual IOA Enablement Card (#5662) causes the pair of embedded controllers in that processor system unit to be configured as dual controllers accessing all six SAS bays. Without the feature 5662, each of the two controllers can access only two or three SAS bays. With the 175 MB Cache RAID - Dual IOA Enablement Card, you can get controller redundancy, additional RAID protection options, and additional I/O performance. RAID 5 (a minimum of three drives required) and RAID 6 (a minimum of four drives required) are available when configured as dual controllers with one set of six bays. Another expansion option available using the paired embedded controller configuration with the 175 MB Cache RAID - Dual IOA Enablement Card feature is an SAS expansion port. The SAS expansion port can add more SAS bays to the six bays in the system unit. A feature 5887 SAS disk drawer in mode 1 can be attached using a SAS port on the rear of the processor drawer, and its 24 SAS bays are run by the pair of embedded controllers. The pair of embedded controllers are now running 30 SAS bays (six SFF bays in the system unit and 24 SFF bays in the drawer). The disk drawer is attached to the SAS port with an SAS YI cable and the embedded controllers connected to the port using a feature 1819 cable assembly. In this 30-bay configuration, all drives must be HDDs. A feature 5886 SAS disk drawer can similarly be configured in place of the #5887 drawer. IBM i supports configurations using one set of six bays but does not support logically splitting the backplane into 3/3 or 2/2/2. Thus, the 175 MB Cache RAID - Dual IOA Enablement Card (#5662) is required if IBM i is to access any of the SAS bays in that processor enclosure. AIX , Linux , and VIOS support configurations using two sets of three bays (3/3) or three sets of two bays (2/2/2) without feature 5662 and supports dual controllers running one set of six bays with feature 5662. The system backplane also includes a third embedded controller for running the DVD-RAM drive in the CEC drawer. Because the controller is independent from the two SAS disk/SSD controllers, it allows the DVD to be switched between multiple partitions without affecting the assignment of disks or SSDs in the CEC drawer. Disks, media, and boot devices/Load source devices
Capacity Backup offering (applies to IBM i only)The Power 750 Express systems Capacity Backup (CBU) designation can help meet your requirements for a second system to use for backup, high availability, and disaster recovery. It enables you to temporarily transfer IBM i processor license entitlements and 5250 Enterprise Enablement entitlements purchased for a primary machine to a secondary CBU-designated system. Temporarily transferring these resources instead of purchasing them for your secondary system may result in significant savings. Processor activations cannot be transferred. The CBU specify feature number 0444 is available only as part of a new server purchase of a 8408-E8D. Certain system prerequisites must be met, and system registration and approval are required before the CBU specify feature can be applied on a new server. Standard IBM i terms and conditions do not allow either IBM i processor license entitlements or 5250 OLTP (Enterprise Enablement) entitlements to be transferred permanently or temporarily. These entitlements remain with the machine they were ordered for. When you register the association between your primary and on-order CBU system, you must agree to certain terms and conditions regarding the temporary transfer. After a CBU system designation is approved and the system is installed, you can temporarily move your optional IBM i processor license entitlement and 5250 Enterprise Enablement entitlements from the primary system to the CBU system when the primary system is down or while the primary system processors are inactive. The CBU system can then better support fail-over and role swapping for a full range of test, disaster recovery, and high availability scenarios. Temporary entitlement transfer means that the entitlement is a property transferred from the primary system to the CBU system and may remain in use on the CBU system as long as the registered primary and CBU system are in deployment for the high availability or disaster recovery operation. The primary system for a Power 750 Express server can be:
These systems have IBM i software licenses with an IBM i P20 software tier, or higher. The primary machine must be in the same enterprise as the CBU system. Before you can temporarily transfer IBM i processor license entitlements from the registered primary system, you must have more than one IBM i processor license on the primary machine and at least one IBM i processor license on the CBU server. You may then transfer any IBM i processor entitlements above the minimum one, assuming the total IBM i workload on the primary system does not require the IBM i entitlement you would like to transfer during the time of the transfer. During this temporary transfer, the CBU system's internal records of its total number of IBM i processor license entitlements are not updated, and you may see IBM i license noncompliance warning messages from the CBU system. Such messages that arise in this situation do not mean you are not in compliance. Before you can temporarily transfer 5250 entitlements, you must have more than one 5250 Enterprise Enablement entitlement on the primary server and at least one 5250 Enterprise Enablement entitlement on the CBU system. You may then transfer the entitlements that are not required on the primary server during the time of transfer and that are above the minimum of one entitlement. For example, if you have an 8-core Power 750 Express as your primary system with four IBM i processor license entitlements (three above the minimum) and two 5250 Enterprise Enablement entitlements (one above the minimum), you can temporarily transfer up to three IBM i entitlements and one 5250 Enterprise Enablement entitlement. During the temporary transfer, the CBU system's internal records of its total number of IBM i processor entitlements is not updated, and you may see IBM i license noncompliance warning messages from the CBU system. If your primary or CBU machine is sold or discontinued from use, any temporary entitlement transfers must be returned to the machine on which they were originally acquired. For CBU registration and further information, visit Active Memory ExpansionActive Memory Expansion is an innovative POWER7+ and POWER7 technology that allows the effective maximum memory capacity to be much larger than the true physical memory maximum. POWER7+ chips contain a hardware accelerator, which handles much of the compression/decompression of memory content, can enable memory expansion up to 125%, about 25% more than POWER7 chips. This can enable an AIX partition to do significantly more work or support more users with the same physical amount of memory. Similarly, it can enable a server to run more partitions and do more work for the same physical amount of memory. Active Memory Expansion uses CPU resource to expand memory capacity. The trade-off of memory capacity for processor cycles can be an excellent choice, but the degree of expansion varies on how compressible the memory content is. It also depends on having adequate spare CPU capacity available for this expansion overhead. Tests in IBM laboratories using sample workloads showed excellent results for many workloads in terms of memory expansion per additional CPU utilized. Other test workloads had more modest results. You have a great deal of control over Active Memory Expansion usage. Each individual AIX partition can turn Active Memory Expansion on or off. Control parameters set the amount of expansion you need in each partition to help control the amount of CPU used by the Active Memory Expansion function. An IPL is required for the specific partition that is turning on memory expansion. After it is turned on, monitoring capabilities are available in standard AIX performance tools such as lparstat, vmstat, topas, and svmon. A planning tool is included with AIX , enabling you to sample actual workloads and estimate both how expandable the partition's memory is and how much CPU resource is needed. Any Power Systems™ model can run the planning tool. In addition, a one-time, 60-day trial of Active Memory Expansion is available to enable more exact memory expansion and CPU measurements. You can request the trial using the Capacity on Demand web page Active Memory Expansion is enabled by chargeable hardware feature 4791, which can be ordered with the initial order of the server or as an MES order. A software key is provided when the enablement feature is ordered, which is applied to the server. An IPL is not required to enable the server. The key is specific to an individual server and is permanent. It cannot be moved to a different server. The additional CPU resource used to expand memory is part of the CPU resource assigned to the AIX partition running Active Memory Expansion. Normal licensing requirements apply. IBM i operating systemFor clients loading the IBM i operating system, the four-digit numeric QPRCFEAT value used on the 8408-E8D is the same as the four-digit numeric feature number for the processors used in the system. For example, if the processor feature number in a system is EPT8, the QPRCFEAT value for the system would be EPT8. The QPRCFEAT value in a Power 750 Express server does not change with the addition of more processors DCMs. Reliability, fault tolerance, and data correctionThe reliability of systems starts with components, devices, and subsystems that are designed to be fault-tolerant. POWER7+ uses lower voltage technology, improving reliability with stacked latches to reduce soft error (SER) susceptibility. During the design and development process, subsystems go through rigorous verification and integration testing processes. During system manufacturing, systems go through a thorough testing process to help ensure the highest level of product quality. The system cache and memory offer ECC (error checking and correcting) fault-tolerant features. ECC is designed to correct environmentally induced, single-bit, intermittent memory failures and single-bit hard failures. With ECC, the likelihood of memory failures will be substantially reduced. ECC also provides double-bit memory error detection that helps protect data in the event of a double-bit memory failure. The AIX and IBM i operating systems provide disk drive mirroring and disk drive controller duplexing. The Linux operating system supports disk drive mirroring (RAID 1) through software, while other RAID protection schemes are provided via hardware RAID adapters. The Journaled File System, also known as JFS or JFS2, helps maintain file system consistency and reduces the likelihood of data loss when the system is abnormally halted due to a power failure. JFS, the recommended file system for 32-bit kernels, now supports extents on the Linux operating system. This feature is designed to substantially reduce or eliminate fragmentation. Its successor, JFS2, is the recommended file system for 64-bit kernels. With 64-bit addressing, a maximum file system size of 32 TB and maximum file size of 16 TB, JFS2 is highly recommended for systems running the AIX operating system. Memory error correction extensions The memory has single-bit-error correction and double-bit-error detection ECC circuitry. The ECC code is also designed such that the failure of any one specific memory module within an ECC word by itself can be corrected absent any other fault. Memory protection features include scrubbing to detect errors, a means to call for the deallocation of memory pages for a pattern of correctable errors detected, and signaling deallocation of a logical memory block when an error occurs that cannot be corrected by the ECC code. Fault monitoring functions
Mutual surveillance The Service Processor monitors the operation of the firmware during the boot process, and also monitors the Hypervisor for termination. The Hypervisor monitors the Service Processor and will perform a reset/reload if it detects the loss of the Service Processor. If the reset/reload does not correct the problem with the Service Processor, the Hypervisor will notify the operating system and the operating system can take appropriate action, including calling for service. Environmental monitoring functions POWER7+ processor-based servers include a range of environmental monitoring functions:
Availability enhancement functions The POWER7+ family of systems continues to offer and introduce significant enhancements designed to increase system availability. POWER6® processor functions As in POWER6 , the POWER7+ processor has the ability to do processor instruction retry and alternate processor recovery for a number of core- related faults. This significantly reduces exposure to both hard (logic) and soft (transient) errors in the processor core. Soft failures in the processor core are transient (intermittent) errors, often due to cosmic rays or other sources of radiation, and generally are not repeatable. When an error is encountered in the core, the POWER7+ processor will first automatically retry the instruction. If the source of the error was truly transient, the instruction will succeed and the system will continue as before. On IBM systems prior to POWER6 , this error would have caused a checkstop. Hard failures are more difficult, being true logical errors that will be replicated each time the instruction is repeated. Retrying the instruction will not help in this situation because the instruction will continue to fail. As in POWER6 , POWER7+ processors have the ability to extract the failing instruction from the faulty core and retry it elsewhere in the system for a number of faults, after which the failing core is dynamically deconfigured and called out for replacement. The entire process is transparent to the partition owning the failing instruction. These systems are designed to avoid a full system outage. POWER7+ single processor checkstopping As in POWER6 , POWER7+ provides single processor checkstopping. This significantly reduces the probability of any one processor affecting total system availability. Partition availability priority Also available is the ability to assign availability priorities to partitions. If an alternate processor recovery event requires spare processor resources in order to protect a workload, when no other means of obtaining the spare resources is available, the system will determine which partition has the lowest priority and attempt to claim the needed resource. On a properly configured POWER7+ processor-based server, this allows that capacity to be first obtained from, for example, a test partition instead of a financial accounting system. POWER7+ cache availability The L2 and L3 caches in the POWER7+ processor are protected with double-bit detect, single-bit correct error detection code (ECC). In addition, the caches maintain a cache line delete capability. A threshold of correctable errors detected on a cache line can result in the data in the cache line being purged and the cache line removed from further operation without requiring a reboot. An ECC uncorrectable error detected in the cache can also trigger a purge and delete of the cache line. This results in no loss of operation if the cache line contained data unmodified from what was stored in system memory. Modified data would be handled through special uncorrectable error handling. L1 data and instruction caches also have a retry capability for intermittent error and a cache set delete mechanism for handling solid failures. In addition, the POWER7+ processors also have the ability to dynamically substitute a faulty bit-line in an L3 cache dedicated to a processor with a spare bit-line. Special uncorrectable error (SUE) handling Uncorrectable errors are difficult for any system to tolerate, although there are some situations where they can be shown to be irrelevant. For example, if an uncorrectable error occurs in cached data that will never again be read or where a fresh write of the data is imminent, it would be unwise to "protect" the user by forcing an immediate reboot. SUE handling was an IBM innovation introduced for POWER5 processors, where an uncorrectable error in memory or cache does not immediately cause the system to terminate. Rather, the system tags the data and determines whether it will ever be used again. If the error is irrelevant, it will not force a checkstop. PCI extended error handling PCI extended error handling (EEH)-enabled adapters respond to a special data packet generated from the affected PCI slot hardware by calling system firmware, which will examine the affected bus, allow the device driver to reset it, and continue without a system reboot. For Linux , EEH support extends to the majority of frequently used devices, although some third-party PCI devices may not provide native EEH support. Predictive failure and dynamic component deallocation Servers with POWER® processors have long had the capability to perform predictive failure analysis on certain critical components such as processors and memory. When these components exhibit symptoms that would indicate a failure is imminent, the system can dynamically deallocate and call home about the failing part before the error is propagated system- wide. In many cases, the system will first attempt to reallocate resources in such a way that will avoid unplanned outages. In the event that insufficient resources exist to maintain full system availability, these servers will attempt to maintain partition availability by user- defined priority. Uncorrectable error recovery When the auto-restart option is enabled, the system can automatically restart following an unrecoverable software error, hardware failure, or environmentally induced (ac power) failure. Serviceability The purpose of serviceability is to repair the system while attempting to minimize or eliminate service cost (within budget objectives), while maintaining high customer satisfaction. Serviceability includes system installation, MES (system upgrades/downgrades), and system maintenance/repair. Depending upon the system and warranty contract, service may be performed by the customer, an IBM representative, or an authorized warranty service provider. The serviceability features delivered in this system provide a highly efficient service environment by incorporating the following attributes
Service environments The HMC is a dedicated server that provides functions for configuring and managing servers for either partitioned or full-system partition using a GUI or command-line interface (CLI). An HMC attached to the system allows support personnel (with client authorization) to remotely log in to review error logs and perform remote maintenance if required. The HMC V7.7.0 (SP1) contains the following:
The POWER7+ processor-based platforms support two main service environments:
Service Interface The Service Interface enables support personnel to communicate with the service support applications in a server using a console, interface, or terminal. Delivering a clear, concise view of available service applications, the Service Interface enables the support team to manage system resources and service information in an efficient and effective way. Applications available via the Service Interface are carefully configured and placed to give service providers access to important service functions. Different service interfaces are used, depending on the state of the system and its operating environment. The primary service interfaces are:
In the light path LED implementation, when a fault condition is detected on the POWER7+ system, an amber FRU fault LED will be illuminated, which will be rolled up to the system fault LED. The light path system pinpoints the exact part by turning on the amber FRU fault LED associated with the part to be replaced. The system can clearly identify components for replacement by using specific component-level LEDs, and can also guide the servicer directly to the component by signaling (turning on solid) the system fault LED, enclosure fault LED, and the component FRU fault LED. The servicer can also use the identify function to blink the FRU-level LED. When this function is activated, a roll-up to the blue enclosure locate and system locate LEDs will occur. These LEDs will turn on solid and can be used to follow the light path from the system to the enclosure and down to the specific FRU. First-failure data capture (FFDC) and error data analysis FFDC is a technique that helps ensure that when a fault is detected in a system, the root cause of the fault will be captured without the need to re-create the problem or run any sort of extending tracing or diagnostics program. For the vast majority of faults, a good FFDC design means that the root cause can also be detected automatically without servicer intervention. FFDC information, error data analysis, and fault isolation are necessary to implement the advanced serviceability techniques that enable efficient service of the systems and to help determine the failing items. In the rare absence of FFDC and Error Data Analysis, diagnostics are required to re-create the failure and determine the failing items. Diagnostics General diagnostic objectives are to detect and identify problems such that they can be resolved quickly. Elements of IBM's diagnostics strategy include the following:
Automatic diagnostics Because of the FFDC technology designed into IBM Servers, it is not necessary to re-create diagnostics for failures or require user intervention. Solid and intermittent errors are designed to be correctly detected and isolated at the time the failure occurs. Runtime and boottime diagnostics fall into this category. Stand-alone diagnostics As the name implies, stand-alone or user-initiated diagnostics require user intervention. The user must perform manual steps, including:
Concurrent maintenance The system will continue to support concurrent maintenance of power, cooling, PCI adapters, DASD, DVD, and firmware updates (when possible). The determination of whether a firmware release can be updated concurrently is identified in the readme information file released with the firmware. Service labels Service providers use these labels to assist them in performing maintenance actions. Service labels are found in various formats and positions, and are intended to transmit readily available information to the servicer during the repair process. Following are some of these service labels and their purpose: Location diagrams Location diagrams are strategically located on the system hardware, relating information regarding the placement of hardware components. Location diagrams may include location codes, drawings of physical locations, concurrent maintenance status, or other data pertinent to a repair. Location diagrams are especially useful when multiple components are installed such as DIMMs, CPUs, processor books, fans, adapter cards, LEDs, and power supplies. Remove/replace procedures Service labels that contain remove/replace procedures are often found on a cover of the system or in other spots accessible to the servicer. These labels provide systematic procedures, including diagrams, detailing how to remove/replace certain serviceable hardware components. Arrows Numbered arrows are used to indicate the order of operation and serviceability direction of components. Some serviceable parts such as latches, levers, and touch points need to be pulled or pushed in a certain direction and certain order for the mechanical mechanisms to engage or disengage. Arrows generally improve the ease of serviceability. Packaging for service The following service enhancements are included in the physical packaging of the systems to facilitate service:
Error handling and reporting In the unlikely event of system hardware or environmentally induced failure, the system runtime error capture capability systematically analyzes the hardware error signature to determine the cause of failure. The analysis result will be stored in system NVRAM. When the system can be successfully restarted either manually or automatically, the error will be reported to the operating system. Error Log Analysis (ELA) can be used to display the failure cause and the physical location of the failing hardware. With the integrated Service Processor, the system has the ability to automatically send out an alert via phone line to a pager or call for service in the event of a critical system failure. A hardware fault will also turn on the amber system fault LED located on the system unit to alert the user of an internal hardware problem. The indicator may also be set to blink by the operator as a tool to allow system identification. For identification, the blue locate LED on the enclosure and at the system level will turn on solid. The amber system fault LED will be on solid when an error condition occurs. On POWER7+ processor-based servers, hardware and software failures are recorded in the system log. When an HMC is attached, an ELA routine analyzes the error, forwards the event to the Service Focal Point (SFP) application running on the HMC, and notifies the system administrator that it has isolated a likely cause of the system problem. The Service Processor event log also records unrecoverable checkstop conditions, forwards them to the SFP application, and notifies the system administrator. Once the information is logged in the SFP application, if the system is properly configured, a call home service request will be initiated and the pertinent failure data with service parts information and part locations will be sent to an IBM Service organization. Customer contact information and specific system-related data such as the machine type, model, and serial number, along with error log data related to the failure are sent to IBM Service. Service Processor The Service Processor enables you to diagnose, check the status of, and sense the operational conditions of a system. It runs on its own power boundary and does not require resources from a system processor to be operational to perform its tasks. The Service Processor supports surveillance of the connection to the HMC and to the system firmware (Hypervisor). It also provides several remote power control options, environmental monitoring, reset, restart, remote maintenance, and diagnostic functions, including console mirroring. The Service Processors menus (ASMI) can be accessed concurrently with system operation allowing nondisruptive abilities to change system default parameters. Call Home Call Home refers to an automatic or manual call from a customer location to IBM support structure with error log data, server status, or other service-related information. Call Home invokes the service organization in order for the appropriate service action to begin. Call Home can be done through HMC or non-HMC managed systems. While configuring Call Home is optional, clients are encouraged to implement this feature in order to obtain service enhancements such as reduced problem determination and faster and potentially more accurate transmittal of error information. In general, using the Call Home feature can result in increased system availability. The Electronic Service Agent™ application can be configured for automated call home. Refer to the next section for specific details on this application. IBM Electronics ServicesElectronic Service Agent and the IBM Electronic Services Web portal comprise the IBM Electronic Services solution--dedicated to providing fast, exceptional support to IBM customers. IBM Electronic Service Agent is a no-charge tool that proactively monitors and reports hardware events such as system errors, performance issues, and inventory. Electronic Service Agent can help focus on the customer's company strategic business initiatives, save time, and spend less effort managing day-to-day IT maintenance issues. Integrated in the operating system in addition to the HMC, Electronic Service Agent is designed to automatically and electronically report system failures and customer-perceived issues to IBM , which can result in faster problem resolution and increased availability. System configuration and inventory information collected by Electronic Service Agent also can be viewed on the secure Electronic Services Web portal and used to improve problem determination and resolution between the customer and the IBM support team. As part of an increased focus to provide even better service to IBM customers, Electronic Service Agent tool configuration and activation comes standard with the system. In support of this effort, a new HMC External Connectivity security white paper has been published, which describes data exchanges between the HMC and the IBM Service Delivery Center (SDC) and the methods and protocols for this exchange. To read the white paper and prepare for Electronic Service Agent installation, go to the "Reference Guide" section at: Select your country. Click on " IBM Electronic Service Agent Connectivity Guide." BenefitsIncreased uptime: Electronic Service Agent is designed to enhance the warranty and maintenance service by providing faster hardware error reporting and uploading system information to IBM Support. This can optimize the time monitoring the symptoms, diagnosing the error, and manually calling IBM Support to open a problem record. And 24 x 7 monitoring and reporting means no more dependency on human intervention or off-hours customer personnel when errors are encountered in the middle of the night. Security: Electronic Service Agent is secure in monitoring, reporting, and storing the data at IBM . Electronic Service Agent securely transmits via the Internet (HTTPS or VPN) and can be configured to communicate securely through gateways to provide customers a single point of exit from their site. Communication between the customer and IBM only flows one way; activating Service Agent does not enable IBM to call into a customer's system. System inventory information is stored in a secure database, which is protected behind IBM firewalls. The customer's business applications or business data is never transmitted to IBM . More accurate reporting: Because system information and error logs are automatically uploaded to the IBM Support Center in conjunction with the service request, customers are not required to find and send system information, decreasing the risk of misreported or misdiagnosed errors. Once inside IBM , problem error data is run through a data knowledge management system and knowledge articles are appended to the problem record. Customized support: Using the IBM ID entered during activation, customers can view system and support information in the "My Systems" and "Premium Search" sections of the Electronic Services Web site. The Electronic Services web portal is a single Internet entry point that replaces the multiple entry points traditionally used to access IBM Internet services and support. This web portal enables you to gain easier access to IBM resources for assistance in resolving technical problems. The newly improved My Systems and Premium Search functions make it even easier for Electronic Service Agent-enabled customers to track system inventory and find pertinent fixes. My Systems provides valuable reports of installed hardware and software using information collected from the systems by IBM Electronic Service Agent . Reports are available for any system associated with the customer's IBM ID. Premium Search combines the function of search and the value of Electronic Service Agent information, providing advanced search of the technical support knowledgebase. Using Premium Search and the Service Agent information that has been collected from the system, customers are able to see search results that apply specifically to their systems. For more information on how to utilize the power of IBM Electronic Services, visit the following website or contact an IBM Systems Services Representative Accessibility by people with disabilitiesA US Section 508 Voluntary Product Accessibility Template (VPAT) containing details on accessibility compliance can be requested at Section 508 of the US Rehabilitation ActIBM Power 750 Express is capable as of March 15, 2013, when used in accordance with associated IBM documentation, of satisfying the applicable requirements of Section 508 of the Rehabilitation Act, provided that any assistive technology used with the product properly interoperates with it. A US Section 508 Voluntary Product Accessibility Template (VPAT) can be requested via the IBM website Back to top
AIX 5.3 and 7.1 support for Power 710, 720, 730, 740, 750, and 760 IBM intends to provide to those clients with AIX 7.1 Technology Level 0 and/or Technology Level 1 and AIX 5.3 Technology Level 12 (and the associated service extension offering) the ability to run that environment on the new Power 710 (8231-E1D), Power 720 (8202-E4D), Power 730 (8231-E2D), Power 740 (8205-E6D), Power 750 (8408-E8D), and Power 760 (9109-RMD). VIOS 2.2.1 support for Power 710, 720, 730, 740, 750, and 760 IBM intends to provide to those clients with VIOS 2.2.1 the ability to run that environment on the new Power 710 (8231-E1D), PowerLinux™ 7R1 (8246-L1D, 8246-L1T), Power 720 (8202-E4D), Power 730 (8231-E2D), PowerLinux 7R2 (8246-L2D, 8246-L2T), Power 740 (8205-E6D), Power 750 (8408-E8D) and Power 760 (9109-RMD). Standard Disclaimer IBM's statements regarding its plans, directions, and intent are subject to change or withdrawal without notice at IBM's sole discretion. Information regarding potential future products is intended to outline our general product direction and it should not be relied on in making a purchasing decision. The information mentioned regarding potential future products is not a commitment, promise, or legal obligation to deliver any material, code or functionality. Information about potential future products may not be incorporated into any contract. The development, release, and timing of any future features or functionality described for our products remains at our sole discretion. RHEL 6.4 support for Power 710, 7R1, 720, 730, 7R2, 740, 750, 760, and PowerLinux 7R1, 7R2 Red Hat intends to continue to work with Red Hat to provide support for the new Power 710 (8231-E1D), PowerLinux 7R1 (8246-L1D, 8246-L1T), Power 720 (8202-E4D), Power 730 (8231-E2D), PowerLinux 7R2 (8246-L2D, 8246-L2T), Power 740 (8205-E6D), Power 750 (8408-E8D), and Power 760 (9109-RMD) with an upcoming Red Hat Enterprise Linux 6 release. For additional questions about the availability of this release and supported hardware servers, consult the Red Hat Hardware Catalog at RHEL 6 Preinstall feature for Power 710, 720, 730, 740, 750, 760, and PowerLinux 7R1, 7R2 IBM intends to provide support for pre-install of an upcoming Red Hat Enterprise Linux 6 release on the new Power 710 (8231-E1D), PowerLinux 7R1 (8246-L1D, 8246-L1T), Power 720 (8202-E4D), Power 730 (8231-E2D), PowerLinux 7R2 (8246-L2D, 8246-L2T), Power 740 (8205-E6D), Power 750 (8408-E8D) and Power 760 (9109-RMD) systems. Standard Red Hat Disclaimer Information concerning Red Hat Enterprise Linux was obtained from Red Hat. Questions concerning Red Hat Enterprise Linux should be directed to Red Hat, as Red Hat Enterprise Linux is not an IBM product. Red Hat Enterprise Linux is sold or licensed, as the case may be, to users under Red Hat's terms and conditions. Availability and support is the responsibility of Red Hat. IBM IS NOT LIABLE AND MAKES NO WARRANTIES, EXPRESS OR IMPLIED, REGARDING RED HAT ENTERPRISE LINUX, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OR CONDITION OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Moreover, all statements regarding IBM's or Red Hat's future direction and intent are subject to change or withdrawal without notice, and represents goals and objectives only. Information regarding potential future third-party products that may work with an IBM product should not be relied on in making a purchase decision. The information mentioned regarding potential future third-party products is not a commitment, promise, or legal obligation to deliver any material, code or functionality. Information about potential future third-party products may not be incorporated into any contract. The development, release, and timing of any future features or functionality described for IBM or Red Hat products remains at IBM's or Red Hat's sole discretion, as applicable. IBM's statements regarding its plans, directions, and intent are subject to change or withdrawal without notice at IBM's sole discretion. Information regarding potential future products is intended to outline our general product direction and it should not be relied on in making a purchasing decision. The information mentioned regarding potential future products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. Information about potential future products may not be incorporated into any contract. The development, release, and timing of any future features or functionality described for our products remains at our sole discretion. Back to top
The following are newly announced features on the specific models of the IBM Power Systems 8408 machine type: Description MT Model Feature IBM Power 750 8408 E8D Solution Delivery Integration (SDI) Indicator 8408 E8D 0002 Solution Delivery Integration (SDI) Bulk MES Order Indicator 8408 E8D 0003 SDI Billing Adjustment Indicator 8408 E8D 0005 OEM Light Manufacturing Order Indicator - EMPTY 8408 E8D 0006 Solution Delivery Integration (SDI) Order Indicator - DO NOT BUILD 8408 E8D 0009 One CSC Billing Unit 8408 E8D 0010 Ten CSC Billing Units 8408 E8D 0011 Mirrored System Disk Level, Specify Code 8408 E8D 0040 Device Parity Protection-All, Specify Code 8408 E8D 0041 Mirrored System Bus Level, Specify Code 8408 E8D 0043 Device Parity RAID-6 All, Specify Code 8408 E8D 0047 RISC-to-RISC Data Migration 8408 E8D 0205 AIX Partition Specify 8408 E8D 0265 Linux Partition Specify 8408 E8D 0266 IBM i Operating System Partition Specify 8408 E8D 0267 Specify Custom Data Protection 8408 E8D 0296 Mirrored Level System Specify Code 8408 E8D 0308 RAID Hot Spare Specify 8408 E8D 0347 V.24/EIA232 6.1m (20-Ft) PCI Cable 8408 E8D 0348 V.24/EIA232 15.2m (50-Ft) PCI Cable 8408 E8D 0349 V.35 6.1m (20-Ft) PCI Cable 8408 E8D 0353 V.35 15.2m (50-Ft) PCI Cable 8408 E8D 0354 V.36 6.1m (20-Ft) PCI Cable 8408 E8D 0356 X.21 6.1m (20-Ft) PCI Cable 8408 E8D 0359 X.21 15.2m (50-Ft) PCI Cable 8408 E8D 0360 V.24/EIA232 (80-Ft) PCI Cable 8408 E8D 0365 UPS Factory Integration Specify 8408 E8D 0373 HMC Factory Integration Specify 8408 E8D 0374 Display Factory Integration Specify 8408 E8D 0375 Reserve Rack Space for UPS 8408 E8D 0376 Reserve Rack Space for HMC 8408 E8D 0377 Reserve Rack Space for Display 8408 E8D 0378 CBU Specify 8408 E8D 0444 Customer Specified Placement 8408 E8D 0456 SSD Placement Indicator - CEC 8408 E8D 0462 SSD Placement Indicator (5802/5803) 8408 E8D 0463 SSD Placement Indicator - 5886 8408 E8D 0464 SSD Placement Indicator - 5887 8408 E8D 0465 19 inch, 1.8 meter high rack 8408 E8D 0551 19 inch, 2.0 meter high rack 8408 E8D 0553 IBM i 6.1 with 6.1.1 Machine Code Specify Code 8408 E8D 0566 IBM i 7.1 Specify Code 8408 E8D 0567 Rack Filler Panel Kit 8408 E8D 0599 Load Source Not in CEC 8408 E8D 0719 #1787 Load Source Specify 8408 E8D 0722 #1996 Load Source Specify 8408 E8D 0724 Specify Load Source in #5802/#5803/#5877 8408 E8D 0726 Specify #5886 Load Source placement 8408 E8D 0727 Specify #5887 Load Source placement 8408 E8D 0728 Specify EXP30 Load Source placement 8408 E8D 0729 SAN Load Source Specify 8408 E8D 0837 #3676 Load Source Specify 8408 E8D 0838 #3677 Load Source Specify 8408 E8D 0839 #3678 Load Source Specify 8408 E8D 0840 #3658 Load Source Specify 8408 E8D 0844 #1884 Load Source Specify 8408 E8D 0851 #1888 Load Source Specify 8408 E8D 0853 #1911 Load Source Specify 8408 E8D 0856 #1916 Load Source Specify 8408 E8D 0857 #1879 Load Source Specify 8408 E8D 0870 #1947 Load Source Specify 8408 E8D 0871 #1948 Load Source Specify 8408 E8D 0872 #1956 Load Source Specify 8408 E8D 0874 #1962 Load Source Specify 8408 E8D 0875 #1794 Load Source Specify 8408 E8D 0876 #1737 Load Source Specify (856GB SFF-1 disk) 8408 E8D 0879 #1738 Load Source Specify (856GB SFF-2 disk) 8408 E8D 0880 #ES04 Load Source Specify 8408 E8D 0882 #ES0B Load Source Specify 8408 E8D 0893 #ES0D Load Source Specify 8408 E8D 0894 US TAA Compliance Indicator 8408 E8D 0983 Modem Cable - US/Canada and General Use 8408 E8D 1025 USB External Docking Station for Removable Disk Drive 8408 E8D 1104 USB 160 GB Removable Disk Drive 8408 E8D 1106 USB 500 GB Removable Disk Drive 8408 E8D 1107 3m, Blue Cat5e Cable 8408 E8D 1111 10m, Blue Cat5e Cable 8408 E8D 1112 25m, Blue Cat5e Cable 8408 E8D 1113 Decline Electronic Service Agent Install Indicator 8408 E8D 1120 Custom Service Specify, Rochester Minn, USA 8408 E8D 1140 200V 16A 4.3m (14-Ft) TL Line Cord 8408 E8D 1406 4.3m 200V/16A Pwr Cd Italy 8408 E8D 1408 125V 4.3m (14-Ft) Line Cord 8408 E8D 1413 200V 1.8m (6-Ft) Locking Line Cord 8408 E8D 1414 200V 1.8m (6-Ft) Watertight Line Cord 8408 E8D 1415 200V 4.3m (14-Ft) Locking Line Cord 8408 E8D 1416 200V 4.3m (14-Ft) Watertight Line Cord 8408 E8D 1417 4.3m 200V/16A Power Cord EU/Asia 8408 E8D 1420 4.3m 200V/16A Power Cord CH/DK 8408 E8D 1421 200V 1.8m (6-Ft) Locking Line Cord 8408 E8D 1424 200V 1.8m (6-Ft) Watertight Line Cord 8408 E8D 1425 200V 4.3m (14-Ft) Locking Line Cord 8408 E8D 1426 200V 4.3m (14-Ft) Watertight Line Cord 8408 E8D 1427 4.3m 200V/10A Power Cord EU/Asia 8408 E8D 1439 4.3m 200V/10A Power Cord Denmark 8408 E8D 1440 4.3m 200V/10A Power Cord S. Africa 8408 E8D 1441 4.3m 200V/10A Power Cord Swiss 8408 E8D 1442 4.3m 200V/10A Power Cord UK 8408 E8D 1443 4.3m 200V/10A Power Cord Israel 8408 E8D 1445 4.3m 200V/32A Power Cord EU 1-PH 8408 E8D 1449 4.3m 200V/16A Power Cord EU 2-PH 8408 E8D 1450 200V (6-Ft) 1.8m Line Cord 8408 E8D 1451 Power Cord (4.3 M), To Wall (250V/15A) 8408 E8D 1452 200V (6-Ft) 1.8m Locking Line Cord 8408 E8D 1453 200V 12A (14-Ft) 4.3m TL Line Cord 8408 E8D 1454 200V (6-Ft) 1.8m Watertight Line Cord 8408 E8D 1455 200V (14-Ft) 4.3m Watertight Line Cord 8408 E8D 1456 200V (6-Ft) 1.8m Upper Line Cord 8408 E8D 1457 200V (6-Ft) 1.8m Upper Locking Cord 8408 E8D 1458 200V (6-Ft) 1.8m Upper Watertight Cord 8408 E8D 1459 30m SPCN Cable 8408 E8D 1466 4.3m 200V/16A Pwr Cd 8408 E8D 1477 856GB 10k RPM SAS SFF Disk Drive (IBM i) 8408 E8D 1737 856GB 10k RPM SAS SFF-2 Disk Drive (IBM i) 8408 E8D 1738 900GB 10K RPM SAS SFF Disk Drive (AIX/Linux) 8408 E8D 1751 900GB 10k RPM SAS SFF-2 Disk Drive (AIX/Linux) 8408 E8D 1752 Integrated Multifunction card with Copper SFP+ 8408 E8D 1768 Integrated Multifunction card with SR Optical 8408 E8D 1769 177GB SFF-1 SSD w/ eMLC (AIX/Linux) 8408 E8D 1775 177GB SFF-1 SSD w/ eMLC (IBM i) 8408 E8D 1787 600GB 10K RPM SAS SFF Disk Drive (AIX/Linux) 8408 E8D 1790 177GB SFF-2 SSD w/ eMLC (AIX/Linux) 8408 E8D 1793 177GB SFF-2 SSD w/ eMLC (IBM i) 8408 E8D 1794 GX++ 12X DDR Adapter, Dual-port 8408 E8D 1808 SAS Cable for triple split DASD backplane 8408 E8D 1815 Quantity 150 of #1962 8408 E8D 1817 Quantity 150 of #1964 8408 E8D 1818 SAS Cable Assembly for SAS Port 8408 E8D 1819 System port/UPS Conversion Cable 8408 E8D 1827 1.5 Meter 12X to 4X Channel Conversion Cable 8408 E8D 1828 3 Meter 12X to 4X Channel Conversion Cable 8408 E8D 1841 10 Meter 12X to 4X Channel Conversion Cable 8408 E8D 1842 Quantity 150 of #1956 8408 E8D 1844 10 Meter 12X to 4X Enhanced Channel Conversion Cable 8408 E8D 1854 0.6 Meter 12X DDR Cable 8408 E8D 1861 1.5 Meter 12X DDR Cable 8408 E8D 1862 8.0 Meter 12X DDR Cable 8408 E8D 1864 3.0 Meter 12X DDR Cable 8408 E8D 1865 Quantity 150 of #1917 8408 E8D 1866 Quantity 150 of #1947 8408 E8D 1868 Quantity 150 of #1925 8408 E8D 1869 283GB 15K RPM SAS SFF Disk Drive (IBM i) 8408 E8D 1879 300GB 15K RPM SAS SFF Disk Drive (AIX/Linux) 8408 E8D 1880 146.8GB 10K RPM SAS SFF Disk Drive 8408 E8D 1882 73.4 GB 15K RPM SAS SFF Disk Drive 8408 E8D 1883 69.7 GB 15K RPM SAS SFF Disk Drive 8408 E8D 1884 300GB 10K RPM SFF SAS Disk Drive 8408 E8D 1885 146GB 15K RPM SFF SAS Disk Drive (AIX/Linux) 8408 E8D 1886 Quantity 150 of #1793 8408 E8D 1887 139GB 15K RPM SFF SAS Disk Drive (IBM i) 8408 E8D 1888 Quantity 150 of #1883 8408 E8D 1891 Quantity 150 of #1882 8408 E8D 1899 283GB 10K RPM SFF SAS Disk Drive (IBM i) 8408 E8D 1911 GX++ 2-port PCIe2 x8 Adapter 8408 E8D 1914 571GB 10k RPM SAS SFF Disk Drive (IBM i) 8408 E8D 1916 146GB 15k RPM SAS SFF-2 Disk Drive (AIX/Linux) 8408 E8D 1917 300GB 10k RPM SAS SFF-2 Disk Drive (AIX/Linux) 8408 E8D 1925 Quantity 150 of #1879 8408 E8D 1926 Quantity 150 of #1948 8408 E8D 1927 Quantity 150 of #1880 8408 E8D 1928 Quantity 150 of #1953 8408 E8D 1929 139GB 15k RPM SAS SFF-2 Disk Drive (IBM i) 8408 E8D 1947 283GB 15k RPM SAS SFF-2 Disk Drive (IBM i) 8408 E8D 1948 300GB 15k RPM SAS SFF-2 Disk Drive (AIX/Linux) 8408 E8D 1953 283GB 10k RPM SAS SFF-2 Disk Drive (IBM i) 8408 E8D 1956 Quantity 150 of #1794 8408 E8D 1958 571GB 10k RPM SAS SFF-2 Disk Drive (IBM i) 8408 E8D 1962 600GB 10k RPM SAS SFF-2 Disk Drive (AIX/Linux) 8408 E8D 1964 177GB SSD Module with eMLC (AIX/Linux) 8408 E8D 1995 177GB SSD Module with eMLC (IBM i) 8408 E8D 1996 PCIe RAID & SSD SAS Adapter 3Gb w/ Blind Swap Cassette 8408 E8D 2055 Primary OS - IBM i 8408 E8D 2145 Primary OS - AIX 8408 E8D 2146 Primary OS - Linux 8408 E8D 2147 Factory Deconfiguration of 1-core 8408 E8D 2319 2M LC-SC 50 Micron Fiber Converter Cable 8408 E8D 2456 2M LC-SC 62.5 Micron Fiber Converter Cable 8408 E8D 2459 4 port USB PCIe Adapter 8408 E8D 2728 PCIe 2-Line WAN w/Modem 8408 E8D 2893 3M Asynchronous Terminal/Printer Cable EIA-232 8408 E8D 2934 Asynchronous Cable EIA-232/V.24 3M 8408 E8D 2936 Serial-to-Serial Port Cable for Drawer/Drawer- 3.7M 8408 E8D 3124 Serial-to-Serial Port Cable for Rack/Rack- 8M 8408 E8D 3125 1m, (3.3-ft) IB 40G Copper Cable QSFP/QSFP 8408 E8D 3287 3m, (9.8-ft.) IB 40G Copper Cable QSFP/QSFP 8408 E8D 3288 5m QDR IB/E'Net Copper Cable QSFP/QSFP 8408 E8D 3289 10 meter Quad Data Rate InfiniBand Optical Cable, QSFP/QSFP 8408 E8D 3290 30 meter Quad Data Rate InfiniBand Optical Cable, QSFP/QSFP 8408 E8D 3293 SAS YO Cable 1.5m - HD 6Gb Adapter to Enclosure 8408 E8D 3450 SAS YO Cable 3m - HD 6Gb Adapter to Enclosure 8408 E8D 3451 SAS YO Cable 6m - HD 6Gb Adapter to Enclosure 8408 E8D 3452 SAS YO Cable 10m - HD 6Gb Adapter to Enclosure 8408 E8D 3453 SAS X Cable 3m - HD 6Gb 2-Adapter to Enclosure 8408 E8D 3454 SAS X Cable 6m - HD 6Gb 2-Adapter to Enclosure 8408 E8D 3455 SAS X Cable 10m - HD 6Gb 2-Adapter to Enclosure 8408 E8D 3456 SAS YO Cable 15m - HD 3Gb Adapter to Enclosure 8408 E8D 3457 SAS X Cable 15m - HD 3Gb 2-Adapter to Enclosure 8408 E8D 3458 69GB 3.5" SAS Solid State Drive 8408 E8D 3586 69GB 3.5" SAS Solid State Drive 8408 E8D 3587 Widescreen LCD Monitor 8408 E8D 3632 IBM T541H /L150p 15" TFT Color Monitor 8408 E8D 3637 IBM ThinkVision L170p Flat Panel Monitor 8408 E8D 3639 ThinkVision L171p Flat Panel Monitor 8408 E8D 3640 IBM T115 Flat Panel Monitor 8408 E8D 3641 ThinkVision L191p Flat Panel Monitor 8408 E8D 3642 IBM T120 Flat Panel Monitor 8408 E8D 3643 IBM T119 Flat Panel Monitor 8408 E8D 3644 IBM T117 Flat Panel Monitor 8408 E8D 3645 73GB 15K RPM SAS Disk Drive 8408 E8D 3646 146GB 15K RPM SAS Disk Drive (AIX/Linux) 8408 E8D 3647 300GB 15K RPM SAS Disk Drive (AIX/Linux) 8408 E8D 3648 450GB 15K RPM SAS Disk Drive (AIX/Linux) 8408 E8D 3649 SAS Cable (EE) Drawer to Drawer 1M 8408 E8D 3652 SAS Cable (EE) Drawer to Drawer 3M 8408 E8D 3653 SAS Cable (EE) Drawer to Drawer 6M 8408 E8D 3654 428GB 15K RPM SAS Disk Drive (IBM i) 8408 E8D 3658 SAS Cable (X) Adapter to SAS Enclosure, Dual Controller/Dual Path 3M: 8408 E8D 3661 SAS Cable (X) Adapter to SAS Enclosure, Dual Controller/Dual Path 6M: 8408 E8D 3662 SAS Cable (X) Adapter to SAS Enclosure, Dual Controller/Dual Path 15M: 8408 E8D 3663 SAS EX Cable 3m - Drawer to Drawer 8408 E8D 3675 69.7GB 15k rpm SAS Disk Drive 8408 E8D 3676 139.5GB 15k rpm SAS Disk Drive (IBM i) 8408 E8D 3677 283.7GB 15k rpm SAS Disk Drive (IBM i) 8408 E8D 3678 SAS Cable (AI)- Adapter to Internal drive 1M 8408 E8D 3679 SAS EX Cable 6m - Drawer to Drawer 8408 E8D 3680 3M SAS CABLE, ADPTR TO ADPTR (AA) 8408 E8D 3681 SAS Cable (AE) Adapter to Enclosure, single controller/single path 3M 8408 E8D 3684 SAS Cable (AE) Adapter to Enclosure, single controller/single path 6M 8408 E8D 3685 SAS Cable (YI) System to SAS Enclosure, Single Controller/Dual Path 3M 8408 E8D 3687 SAS Cable (AT) 0.6 Meter 8408 E8D 3688 SAS AT Cable 0.6m - HD 6Gb Adapter to 12X Enclosure (AT) 8408 E8D 3689 SAS Cable (YO) Adapter to SAS Enclosure, Single Controller/Dual Path 1.5 M 8408 E8D 3691 SAS Cable (YO) Adapter to SAS Enclosure, Single Controller/Dual Path 3 M 8408 E8D 3692 SAS Cable (YO) Adapter to SAS Enclosure, Single Controller/Dual Path 6 M 8408 E8D 3693 SAS Cable (YO) Adapter to SAS Enclosure, Single Controller/Dual Path 15 M 8408 E8D 3694 0.3M Serial Port Converter Cable, 9-Pin to 25-Pin 8408 E8D 3925 Serial Port Null Modem Cable, 9-pin to 9-pin, 3.7M 8408 E8D 3927 Serial Port Null Modem Cable, 9-pin to 9-pin, 10M 8408 E8D 3928 System Serial Port Converter Cable 8408 E8D 3930 1.8 M (6-ft) Extender Cable for Displays (15-pin D-shell to 15-pin D-shell) 8408 E8D 4242 Extender Cable - USB Keyboards, 1.8M 8408 E8D 4256 VGA to DVI Connection Converter 8408 E8D 4276 Package 5X #2055 & 20X #1995 (AIX/Linux) 8408 E8D 4367 Package 5X #2055 & 20X #1996 (IBM i) 8408 E8D 4377 Rack Indicator- Not Factory Integrated 8408 E8D 4650 Rack Indicator, Rack #1 8408 E8D 4651 Rack Indicator, Rack #2 8408 E8D 4652 Rack Indicator, Rack #3 8408 E8D 4653 Rack Indicator, Rack #4 8408 E8D 4654 Rack Indicator, Rack #5 8408 E8D 4655 Rack Indicator, Rack #6 8408 E8D 4656 Rack Indicator, Rack #7 8408 E8D 4657 Rack Indicator, Rack #8 8408 E8D 4658 Rack Indicator, Rack #9 8408 E8D 4659 Rack Indicator, Rack #10 8408 E8D 4660 Rack Indicator, Rack #11 8408 E8D 4661 Rack Indicator, Rack #12 8408 E8D 4662 Rack Indicator, Rack #13 8408 E8D 4663 Rack Indicator, Rack #14 8408 E8D 4664 Rack Indicator, Rack #15 8408 E8D 4665 Rack Indicator, Rack #16 8408 E8D 4666 Active Memory Expansion Enablement 8408 E8D 4792 PCIe Crypto Coprocessor Gen3 BSC 4765-001 8408 E8D 4808 PCIe Crypto Coprocessor Gen4 BSC 4765-001 8408 E8D 4809 One Processor of 5250 Enterprise Enablement 8408 E8D 4988 Full 5250 Enterprise Enablement 8408 E8D 4989 Software Preload Required 8408 E8D 5000 Power Dist Unit 1 Phase NEMA 8408 E8D 5160 Power Dist Unit 1 Phase IEC 8408 E8D 5161 Power Dist Unit 2 of 3 Phase 8408 E8D 5162 Power Dist Unit - 3 Phase 8408 E8D 5163 PCIe2 2-Port 4X IB QDR Adapter 40Gb 8408 E8D 5285 PCIe2 2-port 10GbE SR Adapter 8408 E8D 5287 PCIe2 2-Port 10GbE SFP+Copper Adapter 8408 E8D 5288 2 Port Async EIA-232 PCIe Adapter 8408 E8D 5289 System AC Power Supply, 1925 W 8408 E8D 5532 Sys Console On HMC 8408 E8D 5550 Sys Console-Ethernet No IOP 8408 E8D 5553 Blind Swap Type III Cassette- PCIe, Short Slot 8408 E8D 5646 Blind Swap Type III Cassette- PCI-X or PCIe, Standard Slot 8408 E8D 5647 175MB Cache RAID - Dual IOA Enablement Card 8408 E8D 5662 10Gb FCoE PCIe Dual Port Adapter 8408 E8D 5708 4-Port 10/100/1000 Base-TX PCI Express Adapter 8408 E8D 5717 PCIe2 8Gb 4-port Fibre Channel Adapter 8408 E8D 5729 10 Gigabit Ethernet-CX4 PCI Express Adapter 8408 E8D 5732 8 Gigabit PCI Express Dual Port Fibre Channel Adapter 8408 E8D 5735 PCIe2 4-Port 10GbE&1GbE SR&RJ45 Adapter 8408 E8D 5744 PCIe2 4-Port 10GbE&1GbE SFP+Copper&RJ45 Adapter 8408 E8D 5745 POWER GXT145 PCI Express Graphics Accelerator 8408 E8D 5748 SATA Slimline DVD-RAM Drive 8408 E8D 5762 2-Port 10/100/1000 Base-TX Ethernet PCI Express Adapter 8408 E8D 5767 2-Port Gigabit Ethernet-SX PCI Express Adapter 8408 E8D 5768 10 Gigabit Ethernet-SR PCI Express Adapter 8408 E8D 5769 SATA Slimline DVD-RAM Drive 8408 E8D 5771 10 Gigabit Ethernet-LR PCI Express Adapter 8408 E8D 5772 4 Gigabit PCI Express Single Port Fibre Channel Adapter 8408 E8D 5773 4 Gigabit PCI Express Dual Port Fibre Channel Adapter 8408 E8D 5774 4 Port Async EIA-232 PCIe Adapter 8408 E8D 5785 12X I/O Drawer PCIe, SFF disk 8408 E8D 5802 PCIe 380MB Cache Dual - x4 3Gb SAS RAID Adapter 8408 E8D 5805 12X I/O Drawer PCIe, No Disk 8408 E8D 5877 EXP 12S Expansion Drawer 8408 E8D 5886 EXP24S SFF Gen2-bay Drawer 8408 E8D 5887 PCIe2 4-port 1GbE Adapter 8408 E8D 5899 PCIe Dual-x4 SAS Adapter 8408 E8D 5901 PCIe 380MB Cache Dual - x4 3Gb SAS RAID Adapter 8408 E8D 5903 PCIe2 1.8GB Cache RAID SAS Adapter Tri-port 6Gb 8408 E8D 5913 SAS AA Cable 3m - HD 6Gb Adapter to Adapter 8408 E8D 5915 SAS AA Cable 6m - HD 6Gb Adapter to Adapter 8408 E8D 5916 SAS AA Cable 1.5m - HD 6Gb Adapter to Adapter 8408 E8D 5917 SAS AA Cable 0.6m - HD 6Gb Adapter to Adapter 8408 E8D 5918 Non-paired PCIe SAS RAID Indicator 8408 E8D 5923 Non-paired Indicator 5913 PCIe SAS RAID Adapter 8408 E8D 5924 Shared EXP30 Indicator 8408 E8D 5925 SAS EX Cable 1.5m - Drawer to Drawer 8408 E8D 5926 Remote EXP30 Indicator 8408 E8D 5927 Full Width Keyboard -- USB, US English, #103P 8408 E8D 5951 Full Width Keyboard -- USB, French, #189 8408 E8D 5952 Full Width Keyboard -- USB, Italian, #142 8408 E8D 5953 Full Width Keyboard -- USB, German/Austrian, #129 8408 E8D 5954 Full Width Keyboard -- USB, UK English, #166P 8408 E8D 5955 Full Width Keyboard -- USB, Spanish, #172 8408 E8D 5956 Full Width Keyboard -- USB, Japanese, #194 8408 E8D 5957 Full Width Keyboard -- USB, Brazilian Portuguese, #275 8408 E8D 5958 Full Width Keyboard -- USB, Hungarian, #208 8408 E8D 5959 Full Width Keyboard -- USB, Korean, #413 8408 E8D 5960 Full Width Keyboard -- USB, Chinese, #467 8408 E8D 5961 Full Width Keyboard -- USB, French Canadian, #445 8408 E8D 5962 Full Width Keyboard -- USB, Belgian/UK, #120 8408 E8D 5964 Full Width Keyboard -- USB, Swedish/Finnish, #153 8408 E8D 5965 Full Width Keyboard -- USB, Danish, #159 8408 E8D 5966 Full Width Keyboard -- USB, Bulgarian, #442 8408 E8D 5967 Full Width Keyboard -- USB, Swiss/French/German, #150 8408 E8D 5968 Full Width Keyboard -- USB, Norwegian,#155 8408 E8D 5969 Full Width Keyboard -- USB, Dutch, #143 8408 E8D 5970 Full Width Keyboard -- USB, Portuguese, #163 8408 E8D 5971 Full Width Keyboard -- USB, Greek, #319 8408 E8D 5972 Full Width Keyboard -- USB, Hebrew, #212 8408 E8D 5973 Full Width Keyboard -- USB, Polish, #214 8408 E8D 5974 Full Width Keyboard -- USB, Slovakian, #245 8408 E8D 5975 Full Width Keyboard -- USB, Czech, #243 8408 E8D 5976 Full Width Keyboard -- USB, Turkish, #179 8408 E8D 5977 Full Width Keyboard -- USB, LA Spanish, #171 8408 E8D 5978 Full Width Keyboard -- USB, Arabic, #253 8408 E8D 5979 Full Width Keyboard -- USB, Thai, #191 8408 E8D 5980 Full Width Keyboard -- USB, Russian, #443 8408 E8D 5981 Full Width Keyboard -- USB, Slovenian, #234 8408 E8D 5982 Full Width Keyboard -- USB, US English Euro, #103P 8408 E8D 5983 Power Control Cable (SPCN) - 2 meter 8408 E8D 6001 Power Control Cable (SPCN) - 3 meter 8408 E8D 6006 Power Control Cable (SPCN) - 15 meter 8408 E8D 6007 Power Control Cable (SPCN) - 6 meter 8408 E8D 6008 Power Control Cable (SPCN) - 30 meter 8408 E8D 6029 Opt Front Door for 1.8m Rack 8408 E8D 6068 Opt Front Door for 2.0m Rack 8408 E8D 6069 1.8m Rack Trim Kit 8408 E8D 6246 2.0m Rack Trim Kit 8408 E8D 6247 1.8m Rack Acoustic Doors 8408 E8D 6248 2.0m Rack Acoustic Doors 8408 E8D 6249 1.8m Rack Trim Kit 8408 E8D 6263 2.0m Rack Trim Kit 8408 E8D 6272 Power Cord 4.3m (14-ft), Drawer to Wall/IBM PDU (250V/10A) 8408 E8D 6458 Power Cord 4.3m (14-ft), Drawer To OEM PDU (125V, 15A) 8408 E8D 6460 Power Cord 4.3m (14-ft), Drawer to Wall/OEM PDU (250V/15A) U. S. 8408 E8D 6469 Power Cord 1.8m (6-ft), Drawer to Wall (125V/15A) 8408 E8D 6470 Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU (125V/15A) 8408 E8D 6471 Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU (250V/16A) 8408 E8D 6472 Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU (250V/10A) 8408 E8D 6473 Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU, (250V/13A) 8408 E8D 6474 Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU, (250V/16A) 8408 E8D 6475 Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU, (250V/10A) 8408 E8D 6476 Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU, (250V/16A) 8408 E8D 6477 Power Cord 2.7 M(9-foot), To Wall/OEM PDU, (250V, 16A) 8408 E8D 6478 Power Cord (9-foot) , To Wall/OEM PDU, (250V, 10A) 8408 E8D 6479 Power Cord 1.8M (6-foot),To Wall, (250V, 15A), United States 8408 E8D 6487 Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU, (125V/15A or 250V/10A ) 8408 E8D 6488 4.3m (14-Ft) 3PH/24A 380-415V Power Cord 8408 E8D 6489 4.3m (14-Ft) 1PH/48A 200-240V Power Cord 8408 E8D 6491 4.3m (14-Ft) 1PH/48-60A 200-240V Power Cord 8408 E8D 6492 Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU, (250V/10A) 8408 E8D 6493 Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU, (250V/10A) 8408 E8D 6494 Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A) 8408 E8D 6495 Power Cord 2.7M (9-foot), To Wall/OEM PDU, (250V, 10A) 8408 E8D 6496 Power Cord (6-foot), To Wall/OEM PDU, (250V, 10A) 8408 E8D 6497 Power Cord (6-foot), To Wall/OEM PDU, (250V, 15A) 8408 E8D 6498 Power Cable - Drawer to IBM PDU, 200-240V/10A 8408 E8D 6577 Optional Rack Security Kit 8408 E8D 6580 Modem Tray for 19-Inch Rack 8408 E8D 6586 Power Cord 2.7M (9-foot), To Wall/OEM PDU, (125V, 15A) 8408 E8D 6651 4.3m (14-Ft) 1PH/24-30A Pwr Cord 8408 E8D 6654 4.3m (14-Ft) 1PH/24-30A WR Pwr Cord 8408 E8D 6655 4.3m (14-Ft)1PH/24A Power Cord 8408 E8D 6656 Power Cord 2.7M (9-foot), To Wall/OEM PDU, (250V, 15A) 8408 E8D 6659 Power Cord 4.3m (14-ft), Drawer to Wall/OEM PDU (125V/15A) 8408 E8D 6660 Power Cord 2.8m (9.2-ft), Drawer to Wall/IBM PDU, (250V/10A) 8408 E8D 6665 Power Cord 4.3M (14-foot), Drawer to OEM PDU, (250V, 15A) 8408 E8D 6669 Power Cord (6-foot), To Wall (125V, 15A), PT #59 8408 E8D 6670 Power Cord 2.7M (9-foot), Drawer to IBM PDU, 250V/10A 8408 E8D 6671 Power Cord 1.5M (5-foot), Drawer to IBM PDU, 250V/10A 8408 E8D 6672 Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU, (250V/10A) 8408 E8D 6680 Power Cord (6-foot), To Wall, (250V, 15A) 8408 E8D 6687 Intelligent PDU+, 1 EIA Unit, Universal UTG0247 Connector 8408 E8D 7109 Environmental Monitoring Probe 8408 E8D 7118 Power Distribution Unit 8408 E8D 7188 SDI Software Pre-Install Indicator 8408 E8D 7305 Quantity 150 of #3676 8408 E8D 7517 Quantity 150 of #3677 8408 E8D 7518 Quantity 150 of #3678 8408 E8D 7519 Quantity 150 of #3586 8408 E8D 7535 Quantity 150 of #3587 8408 E8D 7536 Quantity 150 of #3658 8408 E8D 7538 Quantity 150 of #1884 8408 E8D 7543 Quantity 150 of #1888 8408 E8D 7544 Quantity 150 of #1885 8408 E8D 7547 Quantity 150 of #1886 8408 E8D 7548 Quantity 150 of #3647 8408 E8D 7549 Quantity 150 of #1790 8408 E8D 7550 Quantity 150 of #1911 8408 E8D 7557 Quantity 150 of #3648 8408 E8D 7564 Quantity 150 of #3649 8408 E8D 7565 Quantity 150 of #1916 8408 E8D 7566 QTY 150, 177GB SFF-1 SSD w/ eMLC (AIX/Linux) 8408 E8D 7578 QTY 150, 177GB SFF-1 SSD w/ eMLC (IBM i) 8408 E8D 7582 OEM (Generic) Indicator 8408 E8D 7770 OEM (GROUPE BULL) Indicator 8408 E8D 7773 OEM (Hitachi) Indicator 8408 E8D 7775 OEM Publications for IBM Logo Product 8408 E8D 7779 2.0m Rack Side Attach Kit 8408 E8D 7780 PowerVM Express 8408 E8D 7793 PowerVM Standard 8408 E8D 7794 PowerVM Enterprise 8408 E8D 7795 Ethernet Cable, 6M, Hardware Management Console to System Unit 8408 E8D 7801 Ethernet Cable, 15m, Hardware Management Console to System Unit 8408 E8D 7802 Side-by-Side for 1.8m Racks 8408 E8D 7840 Ruggedize Rack Kit 8408 E8D 7841 PCI Blind Swap Cassette Kit, Single Wide Adapters, Type II 8408 E8D 7862 PCI Blind Swap Cassette Kit, Double Wide Adapters, Type III 8408 E8D 7863 Linux Software Preinstall 8408 E8D 8143 Linux Software Preinstall (Business Partners) 8408 E8D 8144 Mouse - USB, with Keyboard Attachment Cable 8408 E8D 8841 USB Mouse 8408 E8D 8845 Order Routing Indicator- System Plant 8408 E8D 9169 Language Group Specify - US English 8408 E8D 9300 specify mode-1 & (1)5901/5278 for EXP24S #5887 8408 E8D 9359 Specify mode-1 & (2)5901/5278 for EXP24S #5887 8408 E8D 9360 Specify mode-2 & (2)5901/5278 for EXP24S #5887 8408 E8D 9361 Specify mode-4 & (4)5901/5278 for EXP24S #5887 8408 E8D 9365 Specify mode-2 & (4)5901/5278 for EXP24S #5887 8408 E8D 9366 Specify mode-1 & (2)5903/5805 for EXP24S #5887 8408 E8D 9367 Specify mode-2 & (4)5903/5805 for EXP24S #5887 8408 E8D 9368 Specify mode-1 & CEC SAS port for EXP24 #5887 8408 E8D 9384 Specify mode-1 & (2) 5913 for EXP24S #5887 8408 E8D 9385 Specify mode-2 & (4) 5913 for EXP24S #5887 8408 E8D 9386 Specify Mode-1 & EXP30 for 1 EXP24S #5887 8408 E8D 9388 New AIX License Core Counter 8408 E8D 9440 New IBM i License Core Counter 8408 E8D 9441 New Red Hat License Core Counter 8408 E8D 9442 New SUSE License Core Counter 8408 E8D 9443 Other AIX License Core Counter 8408 E8D 9444 Other Linux License Core Counter 8408 E8D 9445 3rd Party Linux License Core Counter 8408 E8D 9446 VIOS Core Counter 8408 E8D 9447 Other IBM i License Core Counter 8408 E8D 9448 Month Indicator 8408 E8D 9461 Day Indicator 8408 E8D 9462 Hour Indicator 8408 E8D 9463 Minute Indicator 8408 E8D 9464 Qty Indicator 8408 E8D 9465 Countable Member Indicator 8408 E8D 9466 Language Group Specify - Dutch 8408 E8D 9700 Language Group Specify - French 8408 E8D 9703 Language Group Specify - German 8408 E8D 9704 Language Group Specify - Polish 8408 E8D 9705 Language Group Specify - Norwegian 8408 E8D 9706 Language Group Specify - Portuguese 8408 E8D 9707 Language Group Specify - Spanish 8408 E8D 9708 Language Group Specify - Italian 8408 E8D 9711 Language Group Specify - Canadian French 8408 E8D 9712 Language Group Specify - Japanese 8408 E8D 9714 Language Group Specify - Traditional Chinese (Taiwan) 8408 E8D 9715 Language Group Specify - Korean 8408 E8D 9716 Language Group Specify - Turkish 8408 E8D 9718 Language Group Specify - Hungarian 8408 E8D 9719 Language Group Specify - Slovakian 8408 E8D 9720 Language Group Specify - Russian 8408 E8D 9721 Language Group Specify - Simplified Chinese (PRC) 8408 E8D 9722 Language Group Specify - Czech 8408 E8D 9724 Language Group Specify -- Romanian 8408 E8D 9725 Language Group Specify - Croatian 8408 E8D 9726 Language Group Specify -- Slovenian 8408 E8D 9727 Language Group Specify - Brazilian Portuguese 8408 E8D 9728 Language Group Specify - Thai 8408 E8D 9729 Customer Install MES 8408 E8D 9742 Notify CSO After Install 8408 E8D 9743 Product Renovated by IBM Indicator 8408 E8D 9993 PCIe2 2-Port 10GbE RoCE SFP+ Adapter 8408 E8D EC28 PCIe2 2-Port 10GbE RoCE SR Adapter 8408 E8D EC30 0.6m (2.0-ft), Blue CAT5 Ethernet Cable 8408 E8D ECB0 1.5m (4.9-ft), Blue CAT5 Ethernet Cable 8408 E8D ECB2 EXP30 Ultra SSD I/O Drawer 8408 E8D EDR1 SPSS on Power Solution Indicator 8408 E8D EHSS Specify Mode-1 & (1)ESA1/ESA2 for EXP24S #5887 8408 E8D EJP1 Specify Mode-1 & (2)ESA1/ESA2 for EXP24S #5887 8408 E8D EJP2 Specify Mode-2 & (2)ESA1/ESA2 for EXP24S #5887 8408 E8D EJP3 Specify Mode-2 & (4)ESA1/ESA2 for EXP24S #5887 8408 E8D EJP4 Specify Mode-4 & (4)ESA1/ESA2 for EXP24S #5887 8408 E8D EJP5 Specify Mode-2 & (1)ESA1/ESA2 for EXP24S #5887 8408 E8D EJP6 Specify Mode-2 (2 )ESA1/ESA2 for EXP24 #5887 8408 E8D EJP7 Specify mode-2 (1) ESA1/ESA2 for EXP24 #5887 8408 E8D EJPA Specify mode-2 (2)ESA1/ESA2 for EXP24#5887 8408 E8D EJPB Specify mode-4 (1)ESA1/ESA2 for EXP24 #5887 8408 E8D EJPC Specify mode-4 (2)ESA1/ESA2 for EXP24 #5887 8408 E8D EJPD Specify mode-4 (3)ESA1/ESA2 for EXP24 #5887 8408 E8D EJPE Specify mode-2 (1)5901/5278 for EXP24 #5887 8408 E8D EJPJ Specify mode-2 (2)5901/5278 for EXP24 #5887 8408 E8D EJPK Specify mode-4 (1)5901/5278 for EXP24 #5887 8408 E8D EJPL Specify mode-4 (2)5901/5278 for EXP24 #5887 8408 E8D EJPM Specify mode-4 (3)5901/5278 for EXP24 #5887 8408 E8D EJPN Specify mode-2 (2)5903/5805 for EXP24 #5887 8408 E8D EJPR Specify mode-2 (2)5913 for EXP24 #5887 8408 E8D EJPT Specify Left Half 12X I/O Drawer to ESA1/ESA2 8408 E8D EJPY Specify Right Half 12X I/O Drawer to ESA1/ESA2 8408 E8D EJPZ Full Width Keyboard -- USB, US English, #103P 8408 E8D EK51 Full Width Keyboard -- USB, French, #189 8408 E8D EK52 Full Width Keyboard -- USB, Italian, #142 8408 E8D EK53 Full Width Keyboard -- USB, German/Austrian, #129 8408 E8D EK54 Full Width Keyboard -- USB, UK English, #166P 8408 E8D EK55 Full Width Keyboard -- USB, Spanish, #172 8408 E8D EK56 Full Width Keyboard -- USB, Japanese, #194 8408 E8D EK57 Full Width Keyboard -- USB, Brazilian Portuguese, #275 8408 E8D EK58 Full Width Keyboard -- USB, Hungarian, #208 8408 E8D EK59 Full Width Keyboard -- USB, Korean, #413 8408 E8D EK60 Full Width Keyboard -- USB, Chinese, #467 8408 E8D EK61 Full Width Keyboard -- USB, French Canadian, #445 8408 E8D EK62 Full Width Keyboard -- USB, Belgian/UK, #120 8408 E8D EK64 Full Width Keyboard -- USB, Swedish/Finnish, #153 8408 E8D EK65 Full Width Keyboard -- USB, Danish, #159 8408 E8D EK66 Full Width Keyboard -- USB, Bulgarian, #442 8408 E8D EK67 Full Width Keyboard -- USB, Swiss/French/German, #150 8408 E8D EK68 Full Width Keyboard -- USB, Norwegian,#155 8408 E8D EK69 Full Width Keyboard -- USB, Dutch, #143 8408 E8D EK70 Full Width Keyboard -- USB, Portuguese, #163 8408 E8D EK71 Full Width Keyboard -- USB, Greek, #319 8408 E8D EK72 Full Width Keyboard -- USB, Hebrew, #212 8408 E8D EK73 Full Width Keyboard -- USB, Polish, #214 8408 E8D EK74 Full Width Keyboard -- USB, Slovakian, #245 8408 E8D EK75 Full Width Keyboard -- USB, Czech, #243 8408 E8D EK76 Full Width Keyboard -- USB, Turkish, #179 8408 E8D EK77 Full Width Keyboard -- USB, LA Spanish, #171 8408 E8D EK78 Full Width Keyboard -- USB, Arabic, #253 8408 E8D EK79 Full Width Keyboard -- USB, Thai, #191 8408 E8D EK80 Full Width Keyboard -- USB, Russian, #443 8408 E8D EK81 Full Width Keyboard -- USB, Slovenian, #234 8408 E8D EK82 Full Width Keyboard -- USB, US English Euro, #103P 8408 E8D EK83 Trial PowerVM Live Partition Mobility 8408 E8D ELPM Memory Riser Card 8408 E8D EM01 8GB (2x4GB) Memory DIMMs, 1066 MHz, 2Gb DDR3 DRAM 8408 E8D EM08 16GB (2x8GB) Memory DIMMs, 1066 MHz, 4Gb DDR3 DRAM 8408 E8D EM4B 32GB (2x16GB) Memory DIMMs, 1066 MHz, 4Gb DDR3 DRAM 8408 E8D EM4C 1m (3.3-ft), 10GbE'Net Cable SFP+ Act Twinax Copper 8408 E8D EN01 3m (9.8-ft), 10Gb E'Net Cable SFP+ Act Twinax Copper 8408 E8D EN02 5m (16.4-ft), 10Gb E'Net Cable SFP+ Act Twinax Copper 8408 E8D EN03 PCIe x8 Cable 1.5m 8408 E8D EN05 PCIe x8 Cable 3m 8408 E8D EN07 PCIe x8 Cable 8m 8408 E8D EN08 PCIe2 16Gb 2-port Fibre Channel Adapter 8408 E8D EN0A PCIe2 4-port (10Gb FCoE & 1GbE) SR&RJ45 8408 E8D EN0H Integrated Multifunction Card w/ 10GbE RJ45 & Copper Twinax 8408 E8D EN10 Integrated Multifunction Card w/ 10GbE RJ45 & SR Optical 8408 E8D EN11 Processor & Memory Backplane 8408 E8D EPT1 4.0 GHz , 8-core POWER7+ Processor DCM (2x4-core) 8408 E8D EPT7 3.5 GHz , 8-core POWER7+ Processor DCM (2x4-core) 8408 E8D EPT8 1-core activation of #EPT7 (No charge) 8408 E8D EPTC 1-core activation of #EPT8 (No charge) 8408 E8D EPTD 1-core activation of #EPT7 8408 E8D EPTE 1-core activation of #EPT8 8408 E8D EPTF Service Processor 8408 E8D EPTR Storage Backplane 8408 E8D EPTS Quantity 150 of #3452 SAS YO Cable 6m - HD 6Gb Adapter to Enclosure 8408 E8D EQ02 Quantity 150 of #3453 SAS YO Cable 10m - HD 6Gb Adapter to Enclosure 8408 E8D EQ03 Quantity 150 of #ES0A 8408 E8D EQ0A Quantity of 150 #ES0B 8408 E8D EQ0B Quantity of 150 #ES0C 8408 E8D EQ0C Quantity of 150 #ES0D 8408 E8D EQ0D Quantity 150 of #1737 (856GB SFF-1 disk) 8408 E8D EQ37 Quantity 150 of #1738 (856GB SFF-2 disk) 8408 E8D EQ38 Quantity 150 of #1751 (900GB SFF-1 disk) 8408 E8D EQ51 Quantity 150 of #1752 (900GB SFF-2 disk) 8408 E8D EQ52 Power Cable - Drawer to IBM PDU, 200-240V/10A 8408 E8D EQ77 RFID Tags for Servers, Compute Nodes, Chassis, Racks, and HMCs 8408 E8D ERF1 Optional Front Door for Power 770 & 780 2.0m Rack 8408 E8D ERG7 387GB 1.8" SAS SSD for AIX/Linux with eMLC 8408 E8D ES02 387GB 1.8" SAS SSD for IBM i with eMLC 8408 E8D ES04 387GB SFF-1 SSD for AIX/Linux with eMLC 8408 E8D ES0A 387GB SFF-1 SSD for IBM i with eMLC 8408 E8D ES0B 387GB SFF-2 SSD for AIX/Linux with eMLC 8408 E8D ES0C 387GB SFF-2 SSD for IBM i with eMLC 8408 E8D ES0D PCIe2 RAID SAS Adapter Dual-port 6Gb 8408 E8D ESA1 S&H - No Charge 8408 E8D ESC0 S&H 8408 E8D ESC7 Six ES02 387GB 1.8" SAS SSD for AIX/Linux with eMLC 8408 E8D ESR2 Six ES04 387GB 1.8" SAS SSD for IBM i with eMLC 8408 E8D ESR4 Four ES0A 387GB SFF-1 SSD for AIX/Linux with eMLC 8408 E8D ESRA Four ES0B 387GB SFF-1 SSD for IBM i with eMLC 8408 E8D ESRB Four ES0C 387GB SFF-2 SSD for AIX/Linux with eMLC 8408 E8D ESRC Four ES0D 387GB SFF-2 SSD for IBM i with eMLC 8408 E8D ESRD 1TB Removable Disk Drive Cartridge 8408 E8D EU01 RDX USB External Docking Station for Removable Disk Cartridge 8408 E8D EU04 RDX 320 GB Removable Disk Drive 8408 E8D EU08 1.5TB Removable Disk Drive Cartridge 8408 E8D EU15 10G Base T Wrap 8408 E8D EU20 The following are newly announced features on the specific models of the IBM Power Systems 7014 machine type: Planned availability date: March 15, 2013New featureDescription MT Model Feature Rack Content Specify: 8408-E8D 7014 B42 ER02
7014 T00
7014 T42
Feature conversionsThe existing components being replaced during a model or feature conversion become the property of IBM and must be returned. Feature conversions are always implemented on a "quantity of one for quantity of one" basis. Multiple existing features may not be converted to a single new feature. Single existing features may not be converted to multiple new features. The following conversions are available to customers: Feature conversions for 8408-E8D virtualization engine features
Return
From FC: To FC: parts
7793 - PowerVM Express 7794 - PowerVM Standard No 7793 - PowerVM Express 7795 - PowerVM Enterprise No 7794 - PowerVM Standard 7795 - PowerVM Enterprise No Business Partner informationIf you are a Direct Reseller - System Reseller acquiring products from IBM, you may link directly to Business Partner information for this announcement. A PartnerWorld ID and password are required (use IBM ID). Back to top
IBM Power Systems hardware documentation provides you with the following topical information:
Product documentation is available on a DVD (SK5T-7087), which is shipped with the Power 750, or you can access the product documentation at Back to top
Global Technology ServicesIBM services include business consulting, outsourcing, hosting services, applications, and other technology management. These services help you learn about, plan, install, manage, or optimize your IT infrastructure to be an On Demand Business. They can help you integrate your high-speed networks, storage systems, application servers, wireless protocols, and an array of platforms, middleware, and communications software for IBM and many non-IBM offerings. IBM is your one-stop shop for IT support needs. For details on available services, contact your IBM representative or visit For details on available IBM Business Continuity and Recovery Services, contact your IBM representative or visit For details on education offerings related to specific products, visit Select your country, and then select the product as the category. Back to top
Specified operating environmentPhysical specificationsIBM Power 750 Express server (8408-E8D)
To assure installability and serviceability in non-IBM industry-standard racks, review the installation planning information for any product-specific installation requirements. Operating environment
Notes:
EMC conformance classificationThis equipment is subject to FCC rules and shall comply with the appropriate FCC rules before final delivery to the buyer or centers of distribution.
Homologation -- Telecom Type ApprovalHomologation approval for specific countries has been initiated with the IBM Homologation and Type Approval (HT&A) organization in LaGaude, France. This product is not certified for connection by any means whatsoever to interfaces of public telecommunications networks. Certification may be required by law prior to making any such connection. Contact an IBM representative or reseller for any questions. Product safety/Country testing/Certification
General requirementsThe product is in compliance with IBM Corporate Bulletin C-B 0-2594-000 Statement of Conformity of IBM Product to External Standard (Suppliers Declaration). HomologationThis product is not certified for direct connection by any means whatsoever to interfaces of public telecommunications networks. Certification may be required by law prior to making any such connection. Contact an IBM representative or reseller for any questions. Hardware requirementsPower 750 Express minimum system configuration Each Power 750 Express order must include a minimum of the following items:
RAID There are multiple protection options for disk/SSD drives in the SAS SFF bays in Power 750 Express system unit or drives in 12X attached I/O drawers or drives in disk-only I/O drawers. Although protecting drives is always recommended, AIX/Linux users can choose to leave some or all drives unprotected at their own risk and IBM supports these configurations. IBM i configuration rules differ in this regard, and IBM supports IBM i partition configurations only when disk/SSD drives are protected. This disk/SSD drive protection can be provided by AIX , IBM i, or Linux software or by the disk/SSD hardware controllers. Mirroring of drives is delivered by AIX , IBM i, or Linux software. In addition, AIX and Linux support controllers that include RAID 0, 5, 6, or 10. IBM i integrated storage management already offers striping, so IBM i also supports controllers that include RAID 5 or 6. To further augment disk/SSD protection, hot spare capability can be used for protected drives. Specific hot spare prerequisites apply. An integrated SAS Disk/SSD controller is included in the Power 750 Express system unit. It is optionally augmented by a 175 MB write cache and RAID 5 and RAID 6 capability when feature 5679 is added to the configuration. Without feature 5679, the integrated controller supports system mirroring protection for AIX , IBM i, and Linux and supports RAID 0 or 10 protection for AIX and Linux . Other disk/SSD controllers are provided as PCIe adapters. PCI controllers with and without write cache are supported. AIX and Linux can use disk drives formatted with 512 byte blocks when being mirrored by the operating system. These disk drives must be reformatted to 528 byte sectors when used in RAID arrays. Although a small percentage of the drive's capacity is lost, additional data protection such as ECC and bad block detection is gained in this reformatting. For example, a 300 GB disk drive when reformatted provides around 283 GB. IBM i always uses drives formatted to 528 byte. IBM Power SSDs are formatted to 528 byte. RAID 0 (minimum two drives) offers striping without parity for performance, but does not offer any fault tolerance. In data striping, data is broken down into several smaller, equally sized pieces. Each piece is then written to or read from multiple drives. This process increases I/O bandwidth by simultaneously accessing multiple data paths. Because RAID-0 does not offer any redundancy, a single drive failure can result in the loss of all data in a striped set. This means that all of the data on all the drives could be lost if even a single drive fails. Note that RAID 0 drives can be mirrored by software to provide protection. RAID 5 (minimum three drives) uses block-level data striping with distributed parity. RAID 5 stripes both data and parity information across three or more drives. Fault tolerance is maintained by ensuring that the parity information for any given block of data is placed on a drive separate from those used to store the data itself. RAID 5 requires N+1 drives to accommodate this parity data, thus the available storage capacity for each array is reduced by one drive to provide protection. RAID 6 (minimum four drives) uses block-level data striping with dual distributed parity, the same as RAID 5 except RAID 6 uses a second level of independently calculated and distributed parity information for additional fault tolerance. This extra fault tolerance provides data security in the event two drives fail before a drive can be replaced. RAID 6 requires N+2 drives to accommodate the additional parity data. RAID 10 is RAID 0 plus redundancy. In this type of implementation, an array with an even number of drives is created with mirrored pairs of drives within the array. A RAID 0 stripe set of data is created across the mirrored pairs for performance and for redundancy. If a protected drive fails, the failing drive can be removed from its hot-plug bay and the drive replaced while the server and partition continue to run. The contents can then be re-created while the system continues to run. Note that until the drive is both replaced and its contents re-created, the protection provided using just mirroring or RAID 10 is absent for that drive's now unmirrored paired drive. Similarly, the entire RAID 5 array is unprotected until the failed drive is replaced and re-created. RAID 6 and hot spare were designed to provide additional protection. Software requirementsIf installing the AIX operating system (one of these):
If installing the IBM i operating system (one of these):
If installing the Linux operating system, one of these:
Users should also update their systems with the latest Linux for Power service and productivity tools available from IBM's website If installing VIOS, use VIOS 2.2.2.2. If installing Java™ 1.4.2 on POWER7+ servers, there are unique considerations when running Java 1.4.2 on POWER7+ . For best exploitation of the outstanding performance capabilities and most recent improvements of POWER7+ technology, IBM recommends upgrading Java-based applications to Java 7, Java 6, or Java 5 whenever possible. For more information, refer to the following website LimitationsSystem
Hardware management console (HMC) machine code If attaching an HMC to a new server or adding function to an existing server that requires a firmware update, the HMC machine code may need to be updated. Machine code includes firmware and microcode. Access to machine code updates is conditioned on entitlement and license validation in accordance with IBM policy and practice. IBM may verify entitlement through customer number, serial number, electronic restrictions, or any other means or methods employed by IBM in its discretion. To determine the HMC machine code level required for the firmware level on any server, go to the following web page to access the Fix Level Recommendation Tool (FLRT) on or after the planned availability date for this product. FLRT will identify the correct HMC machine code for the selected system firmware level If a single HMC is attached to multiple servers, the HMC machine code level must be updated to the server with the most recent firmware level. All prior levels of server firmware are supported with the latest HMC machine code level. The HMC V7.7.0 (SP1) contains the following:
Boot requirements
Processor and Memory Backplane (#EPT1)
Redundant fans: Standard Power supply: The base machine must contain two ac power supplies (#5532). Power cords
System memory
Plans for future memory upgrades should be taken into account when deciding which memory feature size to use at the time of initial system order. Memory features:
Feature Minimum Maximum
Feature number quantity quantity
8 GB 1066 MHz EM08 0 32
(2 x 4 GB RDIMMs)
16 GB 1066 MHz EM4B 0 32
(2 x 8 GB RDIMMs)
32 GB 1066 MHz EM4C 0 32
(2 x 16 GB RDIMMs)
Drawer/Tower attachment:
The following list shows I/O drawers that are supported or available on the 8408 machine type and the correct interface to use for each of the drawers.
Order
Feature Description Status Interface number
5802 PCIe 12X I/O Drawer (W/Disk Bays) Available 12X 4
5877 PCIe 12X I/O Drawer (No Disk Bays) Available 12X 4
5887 EXP24S SFF Gen2-bay Drawer Available SAS 51
EDR1 EXP30 Ultra SSD I/O Drawer Available SSD 2
5886 EXP12S SAS Disk Drawer Supported SAS 27
Note: Two or more processor DCMs are required in order to attach a #5802, #5877, or #EDR1 Maximum number of attached I/O drawers per system:
Power 750 Express
Feature (48-core)
O/S AIX Linux IBM i
5802 4 4 4
5877 4 4 4
5887 51 51 51
EDR1 2 2 2
5886 27 27 27
I/O drawers are connected to the adapters in the CEC with the following date transfer cables:
PCIe card slots The Power 750 Express has a maximum of six PCIe 8x hot-plug slots.
Planning informationCable ordersNo additional cables are required. Security, auditability, and controlThis product uses the security and auditability features of host software and application software. The customer is responsible for evaluation, selection, and implementation of security features, administrative procedures, and appropriate controls in application systems and communications facilities. Back to top
Electronic Service Agent and the IBM Electronic Support web portal are dedicated to providing fast, exceptional support to IBM Systems customers. The IBM Electronic Service Agent tool is a no-additional-charge tool that proactively monitors and reports hardware events, such as system errors, performance issues, and inventory. The Electronic Service Agent tool can help you stay focused on your company's strategic business initiatives, save time, and spend less effort managing day-to-day IT maintenance issues. Servers enabled with this tool can be monitored remotely around the clock by IBM Support all at no additional cost to you. Electronic Service Agent is designed to automatically and electronically report system failures and utilization issues to IBM , which can result in faster problem resolution and increased availability. System configuration and inventory information collected by the Electronic Service Agent tool also can be viewed on the secure Electronic Support web portal, and used to improve problem determination and resolution by you and the IBM support team. To access the tool main menu, simply type "smitty esa_main", and select "Configure Electronic Service Agent ." In addition, ESA now includes a powerful Web user interface, giving the administrator easy access to status, tool settings, problem information, and filters. For more information and documentation on how to configure and use Electronic Service Agent , refer to The IBM Electronic Support portal is a single Internet entry point that replaces the multiple entry points traditionally used to access IBM Internet services and support. This portal enables you to gain easier access to IBM resources for assistance in resolving technical problems. The My Systems and Premium Search functions make it even easier for Electronic Service Agent tool-enabled customers to track system inventory and find pertinent fixes. BenefitsIncreased uptime: The Electronic Service Agent tool is designed to enhance the Warranty or Maintenance Agreement by providing faster hardware error reporting and uploading system information to IBM Support. This can translate to less wasted time monitoring the "symptoms," diagnosing the error, and manually calling IBM Support to open a problem record. Its 24 x 7 monitoring and reporting mean no more dependence on human intervention or off-hours customer personnel when errors are encountered in the middle of the night. Security: The Electronic Service Agent tool is designed to be secure in monitoring, reporting, and storing the data at IBM . The Electronic Service Agent tool securely transmits either via the Internet (HTTPS or VPN) or modem, and can be configured to communicate securely through gateways to provide customers a single point of exit from their site. Communication is one way. Activating Electronic Service Agent does not enable IBM to call into a customer's system. System inventory information is stored in a secure database, which is protected behind IBM firewalls. It is viewable only by the customer and IBM . The customer's business applications or business data is never transmitted to IBM . More accurate reporting: Since system information and error logs are automatically uploaded to the IBM Support center in conjunction with the service request, customers are not required to find and send system information, decreasing the risk of misreported or misdiagnosed errors. Once inside IBM , problem error data is run through a data knowledge management system and knowledge articles are appended to the problem record. Customized support: Using the IBM ID entered during activation, customers can view system and support information in the "My Systems" and "Premium Search" sections of the Electronic Support Web site at My Systems provides valuable reports of installed hardware and software using information collected from the systems by Electronic Service Agent . Reports are available for any system associated with the customer's IBM ID. Premium Search combines the function of search and the value of Electronic Service Agent information, providing advanced search of the technical support knowledgebase. Using Premium Search and the Electronic Service Agent information that has been collected from your system, customers are able to see search results that apply specifically to their systems. For more information on how to utilize the power of IBM Electronic Services, contact your IBM Systems Services Representative, or visit Back to top
Volume orders: Contact your IBM representative. IBM Global FinancingYes Warranty periodOne year An IBM part or feature installed during the initial installation of an IBM machine is subject to a full warranty effective on the date of installation of the machine. An IBM part or feature that replaces a previously installed part or feature assumes the remainder of the warranty period for the replaced part or feature. An IBM part or feature added to a machine without replacing a previously installed part or feature is subject to a full warranty effective on its date of installation. Unless specified otherwise, the warranty period, type of warranty service, and service level of a part or feature are the same as those for the machine in which it is installed. This product is provided with a one-year standard warranty. For your convenience, IBM has provided two additional years of extended warranty services plus an upgrade to 24x7 coverage to make this offering. Consult with your advisors about the appropriate financial treatment for this offering. See your sales representative for other available service options. Warranty serviceIf required, IBM provides repair or exchange service depending on the types of warranty service specified for the machine. IBM will attempt to resolve your problem over the telephone, or electronically via an IBM website. IBM may request Electronic Service Agent (ESA) activation and you must follow the problem determination and resolution procedures that IBM specifies. Scheduling of service will depend the time of your call and is subject to parts availability. If applicable to your product, parts considered Customer Replaceable Units (CRUs) will be provided as part of the machine's standard warranty service. Service levels are response-time objectives, may be limited in some areas, and are not guaranteed. The specified level of warranty service may not be available in all worldwide locations. Additional charges may apply outside IBM's normal service area. Contact your local IBM representative or your reseller for country-specific and location-specific information. Customer replacement parts Tier 1 CRUs are those parts which require minimal effort, skill, or experience in order to service. Tier 1 items are mandatory CRUs when base 9 x 5 next-business-day warranty or maintenance is specified in the terms and conditions contract and is in force. However, if the customer elects not to perform Tier 1 service, an IBM SSR may be contracted at an additional service charge to perform the service. If the customer has 7x24 warranty or maintenance in force, then all parts, Tier 1 and Tier2, may be replaced or serviced by a SSR without an additional charge. The following parts have been designated as Tier 1 CRUs:
Tier 2 CRUs require more effort than Tier 1 CRUs and also require a higher level of skill and/or experience when being serviced by the customer. As with Tier 1 parts, if the customer elects not to perform Tier service, an IBM SSR may be contracted at an additional service charge to perform the service. If the customer has 7 x 24 warranty or maintenance in force, then all parts will be replaced or serviced by an SSR without an additional charge. The following parts have been designated as Tier 2 CRUs:
CRU and on-site serviceAt IBM's discretion, you will receive specified CRU service, or IBM will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well-lit, and suitable for the purpose. Service level is:
Non-IBM parts service IBM is now shipping machines with selected non-IBM parts that contain an IBM field replaceable unit (FRU) part number label. These parts are to be serviced during the IBM machine warranty period. IBM is covering the service on these selected non-IBM parts as an accommodation to their customers, and normal warranty service procedures for the IBM machine apply. Warranty service upgradesCustomer replaceable unit service and on-site service for other selected parts Customer replacement parts Tier 1 CRUs are those parts which require minimal effort, skill, or experience in order to service. Tier 1 items are mandatory CRUs when base 9 x 5 next-business-day warranty or maintenance is specified in the terms and conditions contract and is in force. However, if the customer elects not to perform Tier 1 service, an IBM SSR may be contracted at an additional service charge to perform the service. If the customer has 7x24 warranty or maintenance in force, then all parts, Tier 1 and Tier2, may be replaced or serviced by a SSR without an additional charge. The following parts have been designated as Tier 1 CRUs:
Tier 2 CRUs require more effort than Tier 1 CRUs and also require a higher level of skill and/or experience when being serviced by the customer. As with Tier 1 parts, if the customer elects not to perform Tier service, an IBM SSR may be contracted at an additional service charge to perform the service. If the customer has 7 x 24 warranty or maintenance in force, then all parts will be replaced or serviced by an SSR without an additional charge. The following parts have been designated as Tier 2 CRUs:
Maintenance servicesIf required, IBM provides repair or exchange service depending on the types of maintenance service specified for the machine. IBM will attempt to resolve your problem over the telephone or electronically, via an IBM website. Certain machines contain remote support capabilities for direct problem reporting, remote problem determination, and resolution with IBM. IBM may request Electronic Service Agent (ESA) activation and you must follow the problem determination and resolution procedures that IBM specifies. Scheduling of service will depend upon the time of your call and is subject to parts availability. Service levels are response-time objectives and are not guaranteed. The specified level of maintenance service may not be available in all worldwide locations. Additional charges may apply outside IBM's normal service area. Contact your local IBM representative or your reseller for country-specific and location-specific information. The following service selections are available as maintenance options for your machine type. On-site serviceIBM will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well-lit, and suitable for the purpose. The following service selections are available as warranty upgrades for your machine type. Service levels are:
Non-IBM parts service Under certain conditions, IBM provides services for selected non-IBM parts at no additional charge for machines that are covered under maintenance services. This service includes hardware problem determination (PD) on the non-IBM parts (for example, adapter cards, PCMCIA cards, disk drives, memory) installed within IBM machines and provides the labor to replace the failing parts at no additional charge. If IBM has a Technical Service Agreement with the manufacturer of the failing part, or if the failing part is an accommodations part (a part with an IBM FRU label), IBM may also source and replace the failing part at no additional charge. For all other non-IBM parts, customers are responsible for sourcing the parts. Installation labor is provided at no additional charge, if the machine is covered under a warranty service upgrade or a maintenance service. Warranty service upgradesIBM hourly service rate classificationTwo When a type of service involves the exchange of a machine part, the replacement may not be new, but will be in good working order. Field-installable featuresYes Model conversionsNo Machine installationCustomer setup. Customers are responsible for installation according to the instructions IBM provides with the machine. Graduated program license charges applyYes The applicable processor tier is: Small Licensed machine codeIBM Machine Code is licensed for use by a customer on the IBM machine for which it was provided by IBM under the terms and conditions of the IBM License Agreement for Machine Code, to enable the machine to function in accordance with its specifications, and only for the capacity authorized by IBM and acquired by the customer. You can obtain the agreement by contacting your IBM representative or visiting Access to Machine Code updates is conditioned on entitlement and license validation in accordance with IBM policy and practice. IBM may verify entitlement through customer number, serial number, electronic restrictions, or any other means or methods employed by IBM in its discretion. If the machine does not function as warranted and your problem can be resolved through your application of downloadable machine code, you are responsible for downloading and installing these designated Machine Code changes as IBM specifies. If you would prefer, you may request IBM to install downloadable machine code changes; however, you may be charged for that service. Machine Code license acceptance requirementAcceptance-By-Use Machine: Yes, acceptance of the Machine Code license terms is conveyed through the user's initial use of the machine. Back to top
Product chargesThe following are newly announced features on the specific models of the IBM Power Systems 8408 machine type:
Initial/
MES/
Model Feature Both/ RP
Description Number Numbers Support CSU MES
IBM Power 750
E8D Yes
One CSC Billing Unit
E8D 0010 Both Yes No
Ten CSC Billing Units
E8D 0011 Both Yes No
Mirrored System Disk Level, Sp
E8D 0040 Both Yes No
Device Parity Protection All
E8D 0041 Both Yes No
Mirrored System Bus Level
E8D 0043 Both Yes No
Device Parity RAID 6 All
E8D 0047 Both Yes No
RISC to RISC Data Migration
E8D 0205 Initial Yes No
AIX Partition Specify
E8D 0265 Both Yes No
Linux Partition Specify
E8D 0266 Both Yes No
IBM i Partition Specify
E8D 0267 Both Yes No
Specify Custom Data Protection
E8D 0296 Both Yes No
Mirrored Level System Specify
E8D 0308 Both Yes No
RAID Hot Spare Specify
E8D 0347 Both Yes No
V.24/EIA232 6.1m (20 Ft) PCI C
E8D 0348 Both Yes No
V.24/EIA232 15.2m (50 Ft) PCI
E8D 0349 Support Yes No
V.35 6.1m (20 Ft) PCI Cable
E8D 0353 Both Yes No
V.35 15.2m (50 Ft) PCI Cable
E8D 0354 Support Yes No
V.36 6.1m (20 Ft) PCI Cable
E8D 0356 Support Yes No
X.21 6.1m (20 Ft) PCI Cable
E8D 0359 Both Yes No
X.21 15.2m (50 Ft) PCI Cable
E8D 0360 Support Yes No
V.24/EIA232 (80 Ft) PCI Cable
E8D 0365 Support Yes No
UPS Factory Integration Spcfy
E8D 0373 MES Yes No
HMC Factory Integration Spcfy
E8D 0374 MES Yes No
Display Factory Int. Specify
E8D 0375 MES Yes No
Rack Space for UPS
E8D 0376 MES Yes No
Reserve Rack for HMC
E8D 0377 MES Yes No
Reserve Rack Space for Display
E8D 0378 MES Yes No
CBU Specify
E8D 0444 Initial Yes No
Customer Specified Placement
E8D 0456 Initial Yes No
SSD Placement Indicator CEC
E8D 0462 Both Yes No
SSD Placement Indicator 5802/3
E8D 0463 Initial N/A No
SSD Placement Indicator 5886
E8D 0464 Initial N/A No
SSD Placement Indicator 5887
E8D 0465 Initial N/A No
19 inch, 1.8 meter high rack
E8D 0551 MES Yes No
19 inch, 2.0 meter high rack
E8D 0553 MES Yes No
IBM i 6.1 w/6.1.1 Machine Code
E8D 0566 Both Yes No
IBM i 7.1 Specify Code
E8D 0567 Both Yes No
Rack Filler Panel Kit
E8D 0599 Both Yes No
Load Source Not in CEC
E8D 0719 Both Yes No
#1787 Load Source Specify
E8D 0722 Both Yes No
#1996 Load Source Specify
E8D 0724 Initial N/A No
Specify Load Source 5802/3/77
E8D 0726 Both Yes No
Specify 5886 Load Source plac
E8D 0727 Both Yes No
#5887 Load Source Specify
E8D 0728 Both Yes No
EXP30 Load Source Specify
E8D 0729 Both Yes No
SAN Load Source Specify
E8D 0837 Both Yes No
3676 Load Source Specify
E8D 0838 Support Yes No
3677 Load Source Specify
E8D 0839 Support Yes No
3678 Load Source Specify
E8D 0840 Support Yes No
3658 Load Source Specify
E8D 0844 Support Yes No
1884 Load Source Specify
E8D 0851 Support Yes No
1888 Load Source Specify
E8D 0853 Both Yes No
1911 Load Source Specify
E8D 0856 Both Yes No
#1916 Load Source Specify
E8D 0857 Both Yes No
#1879 Load Source Specify
E8D 0870 Both Yes No
#1947 Load Source Specify
E8D 0871 Both Yes No
#1948 Load Source Specify
E8D 0872 Both Yes No
#1956 Load Source Specify
E8D 0874 Both Yes No
#1962 Load Source Specify
E8D 0875 Both Yes No
#1794 Load Source Specify
E8D 0876 Both Yes No
#1737 Load Source Specify(856G
E8D 0879 Both Yes No
#1738 Load Source Specify SFF2
E8D 0880 Both Yes No
#ES04 Load Source Specify
E8D 0882 Initial Yes No
#ES0B Load Source Specify
E8D 0893 Both Yes No
#ES0D Load Source Specify
E8D 0894 Both Yes No
US TAA Compliance Indicator
E8D 0983 Both N/A No
Modem Cable US/Canada and GU
E8D 1025 Both Yes No
USB External Docking Station R
E8D 1104 Support Yes No
USB 160 GB Removable Disk Dr
E8D 1106 Support Yes No
USB 500 GB Removable Disk Dr
E8D 1107 Both Yes No
3m, Blue Cat5e Cable
E8D 1111 Both Yes No
10m, Blue Cat5e Cable
E8D 1112 Both Yes No
25m, Blue Cat5e Cable
E8D 1113 Both Yes No
Decline ESA Indicator
E8D 1120 NC Initial N/A No
Custom Serv. Specify, Roch
E8D 1140 Both Yes No
200V 16A 4.3m (14 Ft) TL Line
E8D 1406 Support Yes No
4.3m 200V/16A Pwr Cd Italy
E8D 1408 Support Yes No
E8D 1414 Support Yes No
200V 1.8m (6 Ft) Watertight LC
E8D 1415 Support Yes No
200V 4.3m (14 Ft) Locking Line
E8D 1416 Support Yes No
200V 4.3m (14 Ft) Watertight L
E8D 1417 Support Yes No
4.3m 200V/16A Power Cord EU/As
E8D 1420 Support Yes No
4.3m 200V/16A Power Cord CH/DK
E8D 1421 Support Yes No
200V 1.8m (6 Ft) Locking Line
E8D 1424 Support Yes No
200V 1.8m (6 Ft) Watertight Li
E8D 1425 Support Yes No
200V 4.3m (14 Ft) Locking Line
E8D 1426 Support Yes No
200V 4.3m (14 Ft) Watertight L
E8D 1427 Support Yes No
4.3m 200V/10A Power Cord EU/As
E8D 1439 Support Yes No
4.3m 200V/10A Power Cord Denma
E8D 1440 Support Yes No
4.3m 200V/10A Power Cord S. Af
E8D 1441 Support Yes No
4.3m 200V/10A Power Cord Swiss
E8D 1442 Support Yes No
4.3m 200V/10A Power Cord UK
E8D 1443 Support Yes No
4.3m 200V/10A Power Cord Israe
E8D 1445 Support Yes No
4.3m 200V/32A Power Cord EU 1
E8D 1449 Support Yes No
4.3m 200V/16A Power Cord EU 2
E8D 1450 Support Yes No
200V (6 Ft) 1.8m Line Cord
E8D 1451 Support Yes No
200V (14 Ft) 4.3m Line Cord
E8D 1452 Support Yes No
200V (6 Ft) 1.8m Locking Line
E8D 1453 Support Yes No
200V 12A (14 Ft) 4.3m TL Line
E8D 1454 Support Yes No
200V (6 Ft) 1.8m Watertight Li
E8D 1455 Support Yes No
200V (14 Ft) 4.3m Watertight L
E8D 1456 Support Yes No
200V (6 Ft) 1.8m Upper Line Co
E8D 1457 Support Yes No
200V (6 Ft) 1.8m Upper Locking
E8D 1458 Support Yes No
200V (6 Ft) 1.8m Locking
E8D 1459 Support Yes No
30m SPCN Cable
E8D 1466 Support Yes No
4.3m 200V/16A Pwr Cd
E8D 1477 Support Yes No
856GB 10k RPM SAS SFF Disk
E8D 1737 Both Yes No
856GB 10k RPM SAS SFF-2 Disk
E8D 1738 Both Yes No
900GB 10k RPM SAS SFF Disk
E8D 1751 Both Yes No
900GB 10k RPM SAS SFF-2 Disk
E8D 1752 Both Yes No
Quad ENET Card w Copper SFP+
E8D 1768 Both Yes No
Quad ENET Card w SR Optical
E8D 1769 Both Yes No
177GB SFF-1 SSD w/ eMLC AIX/Li
E8D 1775 Both Yes No
177GB SFF-1 SSD w/ eMLC IBM i
E8D 1787 Both Yes No
600GB 10k RPM SAS SFF Disk
E8D 1790 Both Yes No
177GB SFF-2 SSD w/ eMLC AIX/Li
E8D 1793 Both Yes No
177GB SFF-2 SSD w/ eMLC IBM i
E8D 1794 Both Yes No
GX 12X DDR Adapter Dual port
E8D 1808 Both Yes No
SAS Cable for triple split DAS
E8D 1815 Both Yes No
Quantity 150 of #1962
E8D 1817 Both Yes No
Quantity 150 of #1964
E8D 1818 Both Yes No
SAS Cbl Assembly for SAS Port
E8D 1819 Both Yes No
System port/UPS Conversion Cab
E8D 1827 Both Yes No
1.5 Meter 12X to 4X Channel CC
E8D 1828 Both Yes No
3 Meter 12X to 4X Channel CC
E8D 1841 Both Yes No
12X to 4X Chan conv- 10M
E8D 1842 Support Yes No
Quantity 150 of #1956
E8D 1844 Both Yes No
10 Meter 12X to 4X Enhance CCC
E8D 1854 Both Yes No
0.6 Meter 12X DDR Cable
E8D 1861 Both Yes No
1.5 Meter 12X DDR Cable
E8D 1862 Both Yes No
8 Meter 12X DDR Cable
E8D 1864 Both Yes No
3.0 Meter 12X DDR Cable
E8D 1865 Both Yes No
Quantity 150 of #1917
E8D 1866 Both Yes No
Quantity 150 of #1947
E8D 1868 Both Yes No
Quantity 150 of #1925
E8D 1869 Both Yes No
283GB 15K RPM SAS Disk
E8D 1879 Both Yes No
300GB 15K RPM SAS Disk
E8D 1880 Both Yes No
146.8GB 10K RPM SAS SFF Disk D
E8D 1882 Support Yes No
73.4 GB 15K RPM SAS SFF Disk D
E8D 1883 Support Yes No
69.7 GB 15K RPM SAS SFF Disk D
E8D 1884 Support Yes No
300GB 10K RPM SFF SAS Disk D
E8D 1885 Both Yes No
146GB 15K RPM SFF SAS Disk D
E8D 1886 Both Yes No
Quantity 150 of #1793
E8D 1887 Both Yes No
139GB 15K RPM SFF SAS Disk D
E8D 1888 Both Yes No
QUANTITY 150 OF 1883
E8D 1891 Support Yes No
QUANTITY 150 OF 1882
E8D 1899 Support Yes No
283GB 10K RPM SFF SAS Disk Dri
E8D 1911 Both Yes No
GX++ 2-port PCIe2 x8 Adapter
E8D 1914 Both Yes No
571GB 10k RPM SAS SFF Disk
E8D 1916 Both Yes No
146GB 15k RPM SAS SFF-2 Disk
E8D 1917 Both Yes No
300GB 10k RPM SAS SFF-2 Disk
E8D 1925 Both Yes No
Quantity 150 of #1879
E8D 1926 Both Yes No
Quantity 150 of #1948
E8D 1927 Both Yes No
Quantity 150 of #1880
E8D 1928 Both Yes No
Quantity 150 of #1953
E8D 1929 Both Yes No
139GB 15k RPM SAS SFF-2 Disk
E8D 1947 Both Yes No
283GB 15k RPM SAS SFF-2 Disk
E8D 1948 Both Yes No
300GB 15k RPM SAS SFF-2 Disk
E8D 1953 Both Yes No
283GB 10k RPM SAS SFF-2 Disk
E8D 1956 Both Yes No
Quantity 150 of #1794
E8D 1958 Both Yes No
571GB 10k RPM SAS SFF-2 Disk
E8D 1962 Both Yes No
600GB 10k RPM SAS SFF-2 Disk
E8D 1964 Both Yes No
177GB SSD Module with eMLC (AI
E8D 1995 Both No No
1 Gigabit iSCSI TOE PCI X on C
E8D 1996 Both No No
PCIe RAID SSD SAS Adapter 3Gb
E8D 2055 Both Yes No
Primary OS - IBM i
E8D 2145 Both Yes No
Primary OS AIX
E8D 2146 Both Yes No
Primary OS Linux
E8D 2147 Both Yes No
Factory Deconfiguration of 1 c
E8D 2319 Initial Yes No
LC-SC 50 Micron Fiber Conv Cab
E8D 2456 Both Yes No
LC-SC 62.5 Mic.Fib.Conv.Cable
E8D 2459 Both Yes No
4 port USB PCIe Adapter
E8D 2728 Both Yes No
PCIe 2 Line WAN w/Modem
E8D 2893 Initial Yes No
Asynch.Termin/Print.Cbl EIA232
E8D 2934 Both Yes No
Asynchronous Cable EIA 232/V
E8D 2936 Both Yes No
Ser to Ser Port Cab Draw/Draw
E8D 3124 Both Yes No
Serial to Se.Port Cbl Rack 8M
E8D 3125 Both Yes No
1m, QDR IB Copper Cable
E8D 3287 Both Yes No
3m, QDR IB Copper Cable
E8D 3288 Both Yes No
5m QDR IB/E'Net Copper Cable
E8D 3289 Both Yes
10m QDR IB Optic Cable
E8D 3290 Both Yes No
30m QDR IB Optic Cable
E8D 3293 Both Yes No
SAS YO Cable 1.5m - HD 6Gb Ada
E8D 3450 Both Yes No
SAS YO Cable 3m - HD 6Gb Adapt
E8D 3451 Both Yes No
SAS YO Cable 6m - HD 6Gb Adapt
E8D 3452 Both Yes No
SAS YO Cable 10m - HD 6Gb Adap
E8D 3453 Both Yes No
SAS X Cable 3m - HD 6Gb 2-Adap
E8D 3454 Both Yes No
SAS X Cable 6m - HD 6Gb 2-Adap
E8D 3455 Both Yes No
SAS X Cable 10m - HD 6Gb 2-Ada
E8D 3456 Both Yes No
SAS YO Cable 15m - HD 3Gb Adap
E8D 3457 Both Yes No
SAS X Cable 15m - HD 3Gb 2-Ada
E8D 3458 Both Yes No
69GB 3.5 SAS Solid State Driv
E8D 3586 Support Yes No
69GB 3.5 SAS Solid State Driv
E8D 3587 Support Yes No
NOTE: The monitor or display features are subject to a $8
Electronic Waste Recycling Fee (15-inch TO 34-inch video
device).
Widescreen LCD Monitor
E8D 3632 Both Yes No
T541H/L150p 15inchTFT Col.M
E8D 3637 Support Yes No
ThinkVision L170p Flat Pan.M
E8D 3639 Support Yes No
ThinkVision L171p Flat Panel M
E8D 3640 Support Yes No
IBM T115 Flat Panel Monitor
E8D 3641 Support Yes No
ThinkVision L191p Flat Panel M
E8D 3642 Support Yes No
IBM T120 Flat Panel Monitor
E8D 3643 Support Yes No
19in. Flat Panel Monitor
E8D 3644 Support Yes No
17in. Flat Panel Monitor
E8D 3645 Support Yes No
73GB 15K RPM SAS Disk Drive
E8D 3646 Support Yes No
146GB 15K RPM SAS Disk Drive
E8D 3647 Support Yes No
300GB 15K RPM SAS Disk Drive
E8D 3648 Support Yes No
450GB 15K RPM SAS Disk Drive
E8D 3649 Support Yes No
SAS Cable (EE) Drawer to Dr 1M
E8D 3652 Both Yes No
SAS Cable (EE) Drawer to Dr 3M
E8D 3653 Both Yes No
SAS Cable (EE) Drawer to Dr 6M
E8D 3654 Both Yes No
428GB 15K RPM SAS Disk Drive
E8D 3658 Support Yes No
SAS Cable (X) Adapter to SAS E
E8D 3661 Both Yes No
SAS Cbl X Adp SAS Enclosure 6M
E8D 3662 Both Yes No
SAS Cbl X Adp SAS Encl 15M
E8D 3663 Both Yes No
SAS EX cable 3M - Drw to Drw
E8D 3675 Both Yes No
69.7GB 15k rpm SAS Disk Drv
E8D 3676 Support Yes No
139.5GB 15k rpm SAS Disk Drive
E8D 3677 Support Yes No
283.7GB 15k rpm SAS Disk Drive
E8D 3678 Support Yes No
SAS Cab (AI) Adapter to Int 1M
E8D 3679 Both Yes No
SAS EX Cable 6m - Drw to Drw
E8D 3680 Both Yes No
3M SAS CABLE, ADPTR TO ADPTR (
E8D 3681 Both Yes No
SAS Cab (AE) Adapter to En 3M
E8D 3684 Both Yes No
SAS Cable(AE) Adapter to En 6M
E8D 3685 Both Yes No
SAS Ca(YI) System to SAS 3M
E8D 3687 Both Yes No
SAS Cable (AT) 0.6 Meter
E8D 3688 Both Yes No
SAS AT Cable 0.6m - HD 6Gb Ada
E8D 3689 Both Yes No
SAS Cab(YO) Adapter to SAS1.5M
E8D 3691 Both Yes No
SAS Cab(YO) Adapter to SAS 3M
E8D 3692 Both Yes No
SAS Cab(YO) Adapter to SAS 6M
E8D 3693 Both Yes No
SAS Cab(YO) Adapter to SAS 15M
E8D 3694 Both Yes No
0.3M Serial Prt Converter Cbl
E8D 3925 Both Yes No
Serial Port Null Mod Cab 3.7M
E8D 3927 Both Yes No
Ser.Port Null Modem Cable,10M
E8D 3928 Both Yes No
System Serial Port Converter C
E8D 3930 Both Yes No
6Foot Extend.Cbl for Displays
E8D 4242 Both Yes No
Extender Cable USB Keybo 1.8M
E8D 4256 Both Yes No
VGA to DVI Connection Converte
E8D 4276 Both Yes No
Package 5X 2055 20X 1995
E8D 4367 Both Yes No
Package 5X 2055 20X 1995
E8D 4377 Both Yes No
One and only one rack indicator feature is required on
all orders (#4650 to #4666).
No Factory Integration Ind.
E8D 4650 Initial N/A No
Rack Indicator, Rack 1
E8D 4651 Initial N/A No
Rack Indicator, Rack 2
E8D 4652 Initial N/A No
Rack Indicator, Rack 3
E8D 4653 Initial N/A No
Rack Indicator, Rack 4
E8D 4654 Initial N/A No
Rack Indicator, Rack 5
E8D 4655 Initial N/A No
Rack Indicator, Rack 6
E8D 4656 Initial N/A No
Rack Indicator, Rack 7
E8D 4657 Initial N/A No
Rack Indicator, Rack 8
E8D 4658 Initial N/A No
Rack Indicator, Rack 9
E8D 4659 Initial N/A No
Rack Indicator, Rack 10
E8D 4660 Initial N/A No
Rack Indicator, Rack 11
E8D 4661 Initial N/A No
Rack Indicator, Rack 12
E8D 4662 Initial N/A No
Rack Indicator, Rack 13
E8D 4663 Initial N/A No
Rack Indicator, Rack 14
E8D 4664 Initial N/A No
Rack Indicator, Rack 15
E8D 4665 Initial N/A No
Rack Indicator, Rack 16
E8D 4666 Initial N/A No
Active Memory Expansion Enable
E8D 4792 Both Yes No
PCIe Crypto Coprocessor Gen3
E8D 4808 Both Yes No
PCIe Crypto Coprocessor Gen4
E8D 4809 Both Yes No
One Processor of 5250 Enterpri
E8D 4988 Both Yes No
Full 5250 Enterprise Enablemen
E8D 4989 Both Yes No
Software Preload Required
E8D 5000 Initial N/A No
Power Dist Unit 1 Phase NEMA
E8D 5160 Support Yes No
Power Dist Unit 1 Phase IEC
E8D 5161 Support Yes No
Power Dist Unit 2 of 3 Phase
E8D 5162 Support Yes No
Power Dist Unit - 3 Phase
E8D 5163 Support Yes No
PCIe 2-Port 4X IB QDR Adapt
E8D 5285 Both Yes No
PCIe2 2-port 10GbE SR Adapter
E8D 5287 Both Yes No
PCIe2 2-port 10GbE SFP+ Adaptr
E8D 5288 Both Yes No
2 Port Async EIA 232 PCIe Adap
E8D 5289 Both Yes No
System Pwr Sup -1925W
E8D 5532 Initial Yes No
Sys Console On HMC
E8D 5550 Both Yes No
Sys Console Ethernet No IOP
E8D 5553 Both Yes No
Blind Swap Type III Cas PCIe
E8D 5646 MES Yes No
Blind Swap Type III Cas PCI X
E8D 5647 MES Yes No
175MB Cache RAID Dual IOA
E8D 5662 Both Yes No
10Gb FCoE PCIe Dual Port Adapt
E8D 5708 Both Yes No
4 Port 10/100/1000 Base TX PCI
E8D 5717 Both Yes No
PCIe2 8Gb 4-port Fibre Channel
E8D 5729 Both Yes No
10 Gigabit Ethernet CX4 PCI Ex
E8D 5732 Both Yes No
8 Gigabit PCI Express Dual Por
E8D 5735 Both Yes No
PCIe2 4-Port 10GbE&1GbE SR&RJ4
E8D 5744 Both Yes No
PCIe2 4-Port 10GbE&GbE SFP+Cop
E8D 5745 Both Yes No
POWER GXT145 PCI Express Graph
E8D 5748 Both Yes No
SATA Slimline DVD RAM Drive
E8D 5762 Support Yes No
2 Port 10/100/1000 Base TX Eth
E8D 5767 Both Yes No
2 Port Gigabit Ethernet SX PCI
E8D 5768 Both Yes No
10 Gb Eth SR PCI Express Adp
E8D 5769 Both Yes No
SATA Slimline DVD-RAM Drive
E8D 5771 Both Yes No
10 Gigabit Ethernet LR PCI
E8D 5772 Both Yes No
4GigabitPCI-E Single Port Fibr
E8D 5773 Support Yes No
4 Gigabit PCI Express Dual Por
E8D 5774 Both Yes No
4 Port Async EIA 232 PCIe Adap
E8D 5785 Both Yes No
12X I/O Drawer PCIe, SFF disk
E8D 5802 Both Yes No
PCIe 380MB Cache Dual x4 3Gb S
E8D 5805 Both Yes No
12X I/O Drawer PCIe, No Disk
E8D 5877 Both Yes No
EXP 12S Expansion Drawer
E8D 5886 Support Yes No
EXP24S SFF Gen2-bay Drawer
E8D 5887 Both Yes No
PCIe2 4-port 1GbE Adapter
E8D 5899 Both Yes No
PCIe Dual x4 SAS Adapter
E8D 5901 Both Yes No
PCIe 380MB Cache Dual x4 3Gb
E8D 5903 Support Yes No
PCIe2 1.8GB Cache RAID SAS Ada
E8D 5913 Both Yes No
SAS AA Cable 3m - HD 6Gb Adapt
E8D 5915 Both Yes No
SAS AA Cable 6m - HD 6Gb Adapt
E8D 5916 Both Yes No
SAS AA Cable 1.5m - HD 6Gb Ada
E8D 5917 Both Yes No
SAS AA Cbl 0.6m - HD 6Gb Adapt
E8D 5918 Both Yes No
Non paired PCIe SAS RAID Ind
E8D 5923 Both Yes No
Non-paired Indicator 5913 PCIe
E8D 5924 Both Yes No
Shared EXP30 Indicator
E8D 5925 Both Yes No
SAS EX Cable 1.5m - Drw to Drw
E8D 5926 Both Yes No
Remote EXP30 Indicator
E8D 5927 Both Yes No
Full Width Key USB, US English
E8D 5951 Support Yes No
Full Width Key USB, French
E8D 5952 Support Yes No
Full Width Key USB, Italian
E8D 5953 Support Yes No
Full Width Key USB, German/Aus
E8D 5954 Support Yes No
Full Width Key USB, UK English
E8D 5955 Support Yes No
Full Width Key USB, Spanish
E8D 5956 Support Yes No
Full Width Key USB, Japanese
E8D 5957 Support Yes No
Full Width Key USB, BrazilianP
E8D 5958 Support Yes No
Full Width Key USB, Hungarian
E8D 5959 Support Yes No
Full Width Key USB, Korean
E8D 5960 Support Yes No
Full Width Key USB, Chinese
E8D 5961 Support Yes No
Full Width Key USB, French Can
E8D 5962 Support Yes No
Full Width Key USB, Belgian/UK
E8D 5964 Support Yes No
Full Width Key USB, Swedish/Fi
E8D 5965 Support Yes No
Full Width Key USB, Danish
E8D 5966 Support Yes No
Full Width Key USB, Bulgarian
E8D 5967 Support Yes No
Full Width Key USB, Swiss/Fr/G
E8D 5968 Support Yes No
Full Width Key USB, Norwegian
E8D 5969 Support Yes No
Full Width Key USB, Dutch
E8D 5970 Support Yes No
Full Width Key USB, Portuguese
E8D 5971 Support Yes No
Full Width Key USB, Greek
E8D 5972 Support Yes No
Full Width Key USB, Hebrew
E8D 5973 Support Yes No
Full Width Key USB, Polish
E8D 5974 Support Yes No
Full Width Key USB, Slovakian
E8D 5975 Support Yes No
Full Width Key USB, Czech
E8D 5976 Support Yes No
Full Width Key USB, Turkish
E8D 5977 Support Yes No
Full Width Key USB, LA Spanish
E8D 5978 Support Yes No
Full Width Key USB, Arabic
E8D 5979 Support Yes No
Full Width Key USB, Thai
E8D 5980 Support Yes No
Full Width Key USB, Russian
E8D 5981 Support Yes No
Full Width Key USB, Slovenian
E8D 5982 Support Yes No
Full Width Key USB, US English
E8D 5983 Support Yes No
Power Control Cable(SPCN)-2m
E8D 6001 Support Yes No
Power Control Cbl (SPCN) 3 m
E8D 6006 Both Yes No
Power Control Cbl (SPCN) 15 m
E8D 6007 Both Yes No
Power Control Cable(SPCN)-6m
E8D 6008 Support Yes No
Power Control Cable(SPCN)-30m
E8D 6029 Support Yes No
Opt Front Door for 1.8m Rack
E8D 6068 MES Yes No
Opt Front Door for 2.0m Rack
E8D 6069 MES Yes No
1.8m Rack Trim Kit
E8D 6246 Support Yes No
2.0m Rack Trim Kit
E8D 6247 Support Yes No
1.8m Rack Acoustic Doors
E8D 6248 MES Yes No
2.0m Rack Acoustic Doors
E8D 6249 MES Yes No
1.8m Rack Trim Kit
E8D 6263 MES Yes No
2.0m Rack Trim Kit
E8D 6272 MES Yes No
Pwr Crd 4.3m 14ft Wall IBM PDU
E8D 6458 Both Yes No
Pwr Crd (14FT), Drwr - OEM PDU
E8D 6460 Both Yes No
Pwr Crd 4.3m 14ft Wall OEM PDU
E8D 6469 Both Yes No
Pwr Crd 1.8m 6ft Wall 125V/15A
E8D 6470 Support Yes No
Pwr Crd 2.7m 9ft Wall OEM PDU
E8D 6471 Both Yes No
Pwr Crd 2.7m 9ft Wall OEM PDU
E8D 6472 Both Yes No
Pwr Crd 2.7m 9ft Wall OEM PDU
E8D 6473 Both Yes No
Pwr Crd 2.7m 9ft Wall OEM PDU
E8D 6474 Both Yes No
Pwr Crd 2.7m 9ft Wall OEM PDU
E8D 6475 Both Yes No
Pwr Crd 2.7m 9ft Wall OEM PDU
E8D 6476 Both Yes No
Pwr Crd 2.7m 9ft Wall OEM PDU
E8D 6477 Both Yes No
Pwr Crd 2.7m 9ft Wall OEM PDU
E8D 6478 Both Yes No
PWR Cord(9foot),(250V,10A)
E8D 6479 Support Yes No
Pwr Crd 1.8m 6ft Wall 250V,15A
E8D 6487 Support Yes No
Pwr Crd 2.7m 9ft Wall OEM PDU
E8D 6488 Both Yes No
4.3m (14 Ft) 3PH/24A Power Cor
E8D 6489 MES Yes No
4.3m (14 Ft) 1PH/48A Pwr Cord
E8D 6491 MES Yes No
4.3m (14 Ft) 1PH/48 60A Pwr Co
E8D 6492 MES Yes No
Pwr Crd 2.7m 9ft Wall OEM PDU
E8D 6493 Both Yes No
Pwr Crd 2.7m 9ft Wall OEM PDU
E8D 6494 Both Yes No
To Wall/OEM PDU, (250V, 10A)
E8D 6495 Support Yes No
Pwr Crd 2.7m 9ft Wall 250V,10A
E8D 6496 Both Yes No
PWR Cord(6ft),To Wall/OEM PDU
E8D 6497 Both Yes No
Power Cord 6ftTo Wall OEM PDU
E8D 6498 Support Yes No
Power Cable Drawer to IBM PD
E8D 6577 Both Yes No
Optional Rack Security Kit
E8D 6580 MES Yes No
Modem Tray for 19-Inch Rack
E8D 6586 MES Yes No
Pwr Crd 2.7m 9ft Wall 125V,15A
E8D 6651 Both Yes No
4.3m 1PH/24-30A Pwr Cord
E8D 6654 MES Yes No
4.3m 14Ft 1PH/24 30A WR Pwr
E8D 6655 MES Yes No
4.3m 14Ft 1PH/24A Power Cord
E8D 6656 MES Yes No
Pwr.Cord(9ft),To Wall/OEM PDU
E8D 6659 Both Yes No
Pwr Crd 14ft 4.3m WallOEM PDU
Pwr Crd 2.8m 9.2ft Wall PDU
E8D 6665 Both Yes No
Pwr Crd 4.3M, Drwr - OEM PDU
E8D 6669 Both Yes No
Pwr Crd 6-FT, (125V,15A)PT#59
E8D 6670 Support Yes No
Pwr Crd 2.7M, Drwr - IBM PDU
E8D 6671 Both Yes No
Pwr Crd 1.5M, Drwr - IBM PDU
E8D 6672 Both Yes No
Pwr Crd 2.7m 9ft Wall OEM PDU
E8D 6680 Both Yes No
Power Cord (6ft),To Wall
E8D 6687 Support Yes No
IIntelligent PDU+ 1 EIA Unit
E8D 7109 MES Yes No
Environmental Monitoring Probe
E8D 7118 Both Yes No
Power Distribution Unit
E8D 7188 MES Yes No
AAP Software Pre-Inst.Indic.
E8D 7305 Initial N/A No
Quantity 150 of #3676
E8D 7517 Support Yes No
Quantity 150 of #3677
E8D 7518 Support Yes No
Quantity 150 of #3678
E8D 7519 Support Yes No
Quantity 150 of 3586
E8D 7535 Support Yes No
Quantity 150 of 3587
E8D 7536 Support Yes No
Quantity 150 of 3658
E8D 7538 Support Yes No
Quantity 150 of #1884
E8D 7543 Support Yes No
Quantity 150 of #1888
E8D 7544 Both Yes No
Quantity 150 of #1885
E8D 7547 Both Yes No
Quantity 150 of #1886
E8D 7548 Both Yes No
Quantity 150 of 3647
E8D 7549 Support Yes No
Quantity 150 of #1790
E8D 7550 Both Yes No
PCIe RAID SSD SAS Adapter 3Gb
E8D 7557 Both Yes No
Quantity 150 of 3648
E8D 7564 Support Yes No
Quantity 150 of 3649
E8D 7565 Support Yes No
Quantity 150 of #1916
E8D 7566 Both Yes No
QTY 150 177GB SFF-1 SSD 1775
E8D 7578 Both Yes No
QTY 150 177GB SFF-1 SSD IBM i
E8D 7582 Both Yes No
2.0m Rack Side Attach Kit
E8D 7780 Support Yes No
PowerVM Express
E8D 7793 Both Yes No
PowerVM Standard
E8D 7794 Both Yes No
PowerVM Enterprise
E8D 7795 Both Yes No
Eth Cbl 6M HW Management
E8D 7801 Support Yes No
Eth Cbl 15M HW Management
E8D 7802 Both Yes No
Side-by-Side for 1.8m Racks
E8D 7840 Support Yes No
Ruggedize Rack Kit
E8D 7841 Support Yes No
PCI Blind Swap Cassette Kit
E8D 7862 Support Yes No
PCI Blind Swap Cassette Kit
E8D 7863 MES Yes No
Linux Software Preinstall
E8D 8143 Initial N/A No
Linux Software Preinstall BP
E8D 8144 Initial N/A No
Mouse-USB,Black KBD Att C
E8D 8841 Support Yes No
USB Mouse
E8D 8845 Both Yes No
Order Routing Indicator Syste
E8D 9169 Initial N/A No
Language Group Spcf-US Eng
E8D 9300 NC Initial N/A No
specify mode-1 & (1)5901/5278
E8D 9359 Initial N/A No
Specify mode-1 & (2)5901/5278
E8D 9360 Both Yes No
Specify mode-2 & (2)5901/5278
E8D 9361 Both Yes No
Specify mode-4 & (4)5901/5278
E8D 9365 Both Yes No
Specify mode-2 & (4)5901/5278
E8D 9366 Both Yes No
Specify mode-1 & (2)5903/5805
E8D 9367 Both Yes No
Specify mode-2 & (4)5903/5805
E8D 9368 Both Yes No
Specify mode-1 & CEC SAS port
E8D 9384 Both Yes No
Specify mode-1 & (2) 5913 EXP
E8D 9385 Both Yes No
Specify mode-2 & (4) 5913 EXP
E8D 9386 Both Yes No
Mode-1 & EXP30 for 1 EXP24S #5
E8D 9388 Both Yes No
New AIX License Core Counter
E8D 9440 NC Initial N/A No
New IBM i Lic Core Counter
E8D 9441 NC Initial N/A No
New Red Hat Lic Core Counter
E8D 9442 NC Initial N/A No
New SUSE Lic Core Counter
E8D 9443 NC Initial N/A No
Other AIX Lic Core Counter
E8D 9444 NC Initial N/A No
Other Linux Lic Core Counter
E8D 9445 NC Initial N/A No
3rd Party Linux Lic Core Cnt
E8D 9446 NC Initial N/A No
VIOS Core Counter
E8D 9447 NC Initial N/A No
Month Indicator
E8D 9461 Initial N/A No
Day Indicator
E8D 9462 Initial N/A No
Hour Indicator
E8D 9463 Initial N/A No
Minute Indicator
E8D 9464 Initial N/A No
Qty Indicator
E8D 9465 Initial N/A No
Countable Member Indicator
E8D 9466 Initial N/A No
Language Group Spcf-Dutch
E8D 9700 NC Initial N/A No
Language Group Spcf-French
E8D 9703 NC Initial N/A No
Language Group Spcf-German
E8D 9704 NC Initial N/A No
Language Group Spcf-Polish
E8D 9705 NC Initial N/A No
Lang Group Specify - Norwegian
E8D 9706 NC Initial N/A No
Lang.Group Spcf-Portuguese
E8D 9707 NC Initial N/A No
Language Group Spcf-Spanish
E8D 9708 NC Initial N/A No
Language Group Spcf-Italian
E8D 9711 NC Initial N/A No
Langua Gr Speci Canadian Frenc
E8D 9712 NC Initial N/A No
Language Group Spcf-Japanese
E8D 9714 NC Initial N/A No
Language Group Specify Tr Chin
E8D 9715 NC Initial N/A No
Language Group Spcf-Korean
E8D 9716 NC Initial N/A No
Language Group Spcf-Turkish
E8D 9718 NC Initial N/A No
Language Group Spcf-Hungarian
E8D 9719 NC Initial N/A No
Language Group Spcf-Slovakian
E8D 9720 NC Initial N/A No
Language Group Spcf-Russian
E8D 9721 NC Initial N/A No
Lang Group Spcf Simpl Chinese
E8D 9722 NC Initial N/A No
Language Group Spcf-Czech
E8D 9724 NC Initial N/A No
Language Group Spcf-Romanian
E8D 9725 NC Initial N/A No
Lang Group Specify - Croatian
E8D 9726 NC Initial N/A No
Language Group Spcf-Slovenian
E8D 9727 NC Initial N/A No
Lang Group Specify - Braz Port
E8D 9728 NC Initial N/A No
Lang Group Specify - Thai
E8D 9729 NC Initial N/A No
PCIe2 2-Port 10GbE RoCE SFP+ A
E8D EC28 Both Yes No
PCIe2 2-Port 10GbE RoCE SR Ada
E8D EC30 Both Yes No
0.6m Blue CAT5 Ethernet Cable
E8D ECB0 Both Yes No
1.5m Blue CAT5 Ethernet Cable
E8D ECB2 Both Yes No
EXP30 Ultra SSD I/O Drawer
E8D EDR1 Both Yes No
SPSS on Pwr Sol Ind
E8D EHSS Initial Yes No
Mode-1 & (1)ESA1/ESA2 for 5887
E8D EJP1 Both Yes No
Mode-1 & (2)ESA1/ESA2 for 5887
E8D EJP2 Both Yes No
Mode-2 & (2)ESA1/ESA2 for 5887
E8D EJP3 Both Yes No
Mode-2 & (4)ESA1/ESA2 for 5887
E8D EJP4 Both Yes No
Mode-4 & (4)ESA1/ESA2 for 5887
E8D EJP5 Both Yes No
Mode-2 & (1)ESA1/ESA2 for 5887
E8D EJP6 Both Yes No
Specify Mode-2(2)ESA1/ESA2
E8D EJP7 Both Yes No
Specify mode-2(1) ESA1/ESA2
E8D EJPA Both Yes No
Specify mode-2 (2) ESA1/ESA2
E8D EJPB Both Yes No
Specify mode-4 (1)ESA1/ESA2
E8D EJPC Both Yes No
Specify mode-4(2)ESA1/ESA2
E8D EJPD Both Yes No
Specify mode-4 (3)ESA1/ESA2
E8D EJPE Both Yes No
Specify mode-2 (1)5901/5278
E8D EJPJ Both Yes No
Specify mode-2(2)5901/5278
E8D EJPK Both Yes No
Specify mode-4 (1)5901/5278
E8D EJPL Both Yes No
Specify mode-4 (2) 5901/5278
E8D EJPM Both Yes No
Specify mode-4 (3) 5901/5278
E8D EJPN Both Yes No
Specify mode-2 (2)5903/5805
E8D EJPR Both Yes No
Specify mode-2 (2) 5913
E8D EJPT Both Yes No
Specify Left Half 12X I/O Draw
E8D EJPY Both Yes No
Specify Right Half 12X I/O Dra
E8D EJPZ Both Yes No
Full Width Key USB, US English
E8D EK51 Both Yes No
Full Width Key USB, French
E8D EK52 Both Yes No
Full WidthKey USB,Italian
E8D EK53 Both Yes No
Full Width Key USB, German/Aus
E8D EK54 Both Yes No
Full Width Key USB, UK English
E8D EK55 Both Yes No
Full Width Key USB, Spanish
E8D EK56 Both Yes No
Full Width Key USB, Japanese
E8D EK57 Both Yes No
Full Width Key USB, BrazilianP
E8D EK58 Both Yes No
Full Width Key USB, Hungarian
E8D EK59 Both Yes No
Full Width Key USB, Korean
E8D EK60 Both Yes No
Full Width Key USB, Chinese
E8D EK61 Both Yes No
Full Width Key USB, French Can
E8D EK62 Both Yes No
Full Width Key USB, Belgian/UK
E8D EK64 Both Yes No
Full Width Key USB, Swedish/Fi
E8D EK65 Both Yes No
Full Width Key USB, Danish
E8D EK66 Both Yes No
Full Width Key USB, Bulgarian
E8D EK67 Both Yes No
Full Width Key USB, Swiss/Fr/G
E8D EK68 Both Yes No
Full Width Key USB, Norwegian
E8D EK69 Both Yes No
Full Width Key USB, Dutch
E8D EK70 Both Yes No
Full Width Key USB, Portuguese
E8D EK71 Both Yes No
Full Width Key USB, Greek
E8D EK72 Both Yes No
Full Width Key USB, Hebrew
E8D EK73 Both Yes No
Full Width Key USB, Polish
E8D EK74 Both Yes No
Full Width Key USB, Slovakian
E8D EK75 Both Yes No
Full Width Key USB, Czech
E8D EK76 Both Yes No
Full Width Key USB, Turkish
E8D EK77 Both Yes No
Full Width Key USB, LA Spanish
E8D EK78 Both Yes No
Full Width Key USB, Arabic
E8D EK79 Both Yes No
Full Width Key USB, Thai
E8D EK80 Both Yes No
Full Width Key USB, Russian
E8D EK81 Both Yes No
Full Width Key USB, Slovenian
E8D EK82 Both Yes No
Full Width Key USB, US English
E8D EK83 Both Yes No
Trial Live Partition Mobility
E8D ELPM Both Yes No
Memory Riser Card
E8D EM01 Both Yes No
8GB (2x4GB) Memory DIMMs 1066
E8D EM08 Both Yes No
16GB (2x8GB) Memory DIMMs 1066
E8D EM4B Both Yes No
32GB (2x16GB) Mem DIMMs 1066
E8D EM4C Both Yes No
1m 10GbE Cable SFP+ Act Twinax
E8D EN01 Both Yes No
3m 10GbE Cable SFP+ Act Twinax
E8D EN02 Both Yes No
5m 10GbE Cable SFP+ Act Twinax
E8D EN03 Both Yes No
PCIe x8 Cable 1.5m
E8D EN05 Both Yes No
PCIe x8 Cable 3m
E8D EN07 Both Yes No
PCIe x8 Cable 8m
E8D EN08 Both Yes No
PCIe2 16Gb 2-port Fibre Channe
E8D EN0A Both Yes No
PICe2 4-port 10Gb FCoE & 1GbE
E8D EN0H Both Yes No
Integ Multifunc Card w/ 10GbE
E8D EN10 Both Yes No
Integ Multifunc Card w/10GbEo
E8D EN11 Both Yes No
Processor & Memory Backplane
4.0 GHz , 8-c P7+ Proc DCM
E8D EPT1 Initial No No
4.0 GHz , 8-c P7+ Proc DCM
E8D EPT7 Both No No
3.5 GHz , 8-c P7+ Proc DCM
NC 1-core activation of #EPT7
E8D EPT8 Both No No
NC 1-core activation of #EPT7
E8D EPTC Both Yes No
NC 1-core activation of #EPT8
E8D EPTD Both Yes No
1-core activation of #EPT7
E8D EPTE Both Yes No
1-core activation of #EPT8
E8D EPTF Both Yes No
Service Processor
E8D EPTR Initial No No
Storage Backplane
E8D EPTS Initial No No
Quantity 150 of #3452 SAS Cabl
E8D EQ02 Both Yes No
Quantity 150 of #3453 SAS YO
E8D EQ03 Both Yes No
Quantity 150 of #ES0A
E8D EQ0A Both Yes No
Quantity of 150 #ES0B
E8D EQ0B Both Yes No
Quantity of 150 #ES0C
E8D EQ0C Both Yes No
Quantity of 150 #ES0D
E8D EQ0D Both Yes No
Quantity 150 of #1737
E8D EQ37 Both Yes No
Quantity 150 of #1738
E8D EQ38 Both Yes No
Quantity 150 of #1751
E8D EQ51 Both Yes No
Quantity 150 of #1752
E8D EQ52 Both Yes No
Power Cable Drawer to IBM PD
E8D EQ77 Both Yes No
RFID Tags for Compute Nodes
E8D ERF1 Initial N/A No
Front Door for P770/780 2MRack
E8D ERG7 MES Yes No
387GB 1.8" SAS SSD (AIX/Linux)
E8D ES02 Both Yes No
387 GB 1.8 SSD for IBMi w/eMLC
E8D ES04 Both Yes No
387GB SFF-1 SSD for AIX/Linux
E8D ES0A Both Yes No
387GB SFF-1 SSD for IBMi
E8D ES0B Both Yes No
387GB SFF-2 SSD for AIX/Linux
E8D ES0C Both Yes No
387GB SFF-2 SSD for IBM i
E8D ES0D Both Yes No
PCIe2 RAID SAS Adapter 6Gb
E8D ESA1 Both Yes No
S&H - No Charge
E8D ESC0 Initial N/A No
S&H
E8D ESC7 Initial N/A No
Six ES02 387GB 1.8" SAS AIX/Li
E8D ESR2 Initial Yes No
Six ES04 387 GB 1.8 SSD IBMi
E8D ESR4 Initial Yes No
Four ES0A 387GB SFF-1 SSD AIX
E8D ESRA Initial Yes No
Four ES0B 387GB SFF-1 SSD IBMi
E8D ESRB Initial Yes No
Four ES0C387GB SFF-2 SSD AIX
E8D ESRC Initial Yes No
Four ES0D 387GB SFF-2 SSD IBMi
E8D ESRD Initial Yes No
1TB Removable Disk Cartridge
E8D EU01 Both Yes No
RDX USB External Docking
E8D EU04 Both Yes No
RDX 320 GB Removable Disk Driv
E8D EU08 Both Yes No
1.5TB Removable Disk Cartridge
E8D EU15 Both Yes No
10G Base T Wrap
E8D EU20 Both Yes No
The following are newly announced features on the specific models of the IBM Power Systems 7014 machine type:
Initial/
MES/
Description Model Feature Both/ RP
Machine Type 7014 Number Numbers Support CSU MES
Rack Content Specify: 8408-E8D
B42 ER02 Initial Yes
T00 Initial Yes
T42 Initial Yes
Feature conversionsFeature conversions for 8408-E8D virtualization engine features
Parts
From FC: To FC: Returned
7793 - PowerVM Express 7794 - PowerVM Standard No
7793 - PowerVM Express 7795 - PowerVM Enterprise No
7794 - PowerVM Standard 7795 - PowerVM Enterprise No
Pricing termsPrices in the following PDF prices link are suggested list prices on day of announcement for the U.S. only. They are provided for your information only. Dealer prices may vary, and prices may also vary by country. IBM list price does not include tax or shipping and is subject to change without notice. ServicePac pricesFor ServiceElect (ESA) maintenance service charges, contact IBM Global Services at 888-IBM-4343 (426-4343). IBM Global FinancingIBM Global Financing offers competitive financing to credit-qualified customers to assist them in acquiring IT solutions. Offerings include financing for IT acquisition, including hardware, software, and services, from both IBM and other manufacturers or vendors. Offerings (for all customer segments: small, medium, and large enterprise), rates, terms, and availability can vary by country. Contact your local IBM Global Financing organization or visit IBM Global Financing offerings are provided through IBM Credit LLC in the United States, and other IBM subsidiaries and divisions worldwide to qualified commercial and government customers. Rates are based on a customer's credit rating, financing terms, offering type, equipment type, and options, and may vary by country. Other restrictions may apply. Rates and offerings are subject to change, extension, or withdrawal without notice. Financing solutions from IBM Global Financing can help you stretch your budget and affordably acquire the new product. But beyond the initial acquisition, our end-to-end approach to IT management can also help keep your technologies current, reduce costs, minimize risk, and preserve your ability to make flexible equipment decisions throughout the entire technology life cycle. Back to top
To order, contact the Americas Call Centers or your local IBM representative, or your IBM Business Partner. To identify your local IBM representative or IBM Business Partner, call 800-IBM-4YOU (426-4968). Phone: 800-IBM-CALL (426-2255)
Fax: 800-2IBM-FAX (242-6329)
Internet: callserv@ca.ibm.com
Mail: IBM Teleweb Customer Support
ibm.com® Sales Execution Center, Americas North
3500 Steeles Ave. East, Tower 3/4
Markham, Ontario
Canada
L3R 2Z1
Reference: YE001 The Americas Call Centers, our national direct marketing organization, can add your name to the mailing list for catalogs of IBM products. Note: Shipments will begin after the planned availability date. TrademarksPOWER7+, Active Memory, EnergyScale, IBM Systems Director Active Energy Manager, Power Systems, Focal Point, Electronic Service Agent, PowerLinux and HACMP are trademarks of IBM Corporation in the United States, other countries, or both. Power, Express, PowerVM, IBM, AIX, POWER7, Micro-Partitioning, PowerHA, POWER6, POWER and ibm.com are registered trademarks of IBM Corporation in the United States, other countries, or both. Linux is a registered trademark of Linus Torvalds in the United States, other countries, or both. Other company, product, and service names may be trademarks or service marks of others. Terms of useIBM products and services which are announced and available in your country can be ordered under the applicable standard agreements, terms, conditions, and prices in effect at the time. IBM reserves the right to modify or withdraw this announcement at any time without notice. This announcement is provided for your information only. Additional terms of use are located at: For the most current information regarding IBM products, consult your IBM representative or reseller, or visit the IBM worldwide contacts page 
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ENUS113-026.PDF
